10.6 - Changes to users' email quotas not propagating to Dovecot
For the last few months I have been unable to increase users' email quotas on the built-in Dovecot mail server that comes with Server 10.6. This is one of those bugs that popped up in the past many times but always seemed to resolve itself. Now, this function between Server and Dovecot is not working at all.
Things I've tried:
- Editing the quota from my local copy of WGM, remotely connected to the email server
- Editing the quota in WGM directly on the email server
- Deleting the 'maildirsize' file in the users' Dovecot mail folder
- Manually changing the contents of the 'maildirsize' file to a higher value
- Deleting the users' Open Directory account and recreating, but this just re-links it to their previous Dovecot mailbox
Interesting note: If Irefresh the view in Server Admin > Mail > Maintenance after attempting a quota change in WGM, the user's quota never changes. However, it will change temporarily when I edit or delete the 'maildirsize' file, but within seconds it resets itself back to the original quota. The only thing that actually works is deleting the users' OD account and Dovecot mailbox seperately, then creating all new accounts.
In summary, I can create new Dovecot mail boxes with an initial quota, but can never change that quota after the fact.
I have researched this problem extensively on the Dovecot wiki and Apple server forums, and have certainly seen others with this issue, but with no clear resolution. Any help would be extremely appreciated.
Update: I just checked Server Admin > Mail > Maintenance, and noticed that there are now duplicate mail boxes with a 0MB limit for the users I tried to increase quotas for. ***?
Similar Messages
-
I would like to change my user email address to a different email?
I am currently subscribed with [email protected] but would like to change it to [email protected]Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-email address https://forums.adobe.com/thread/1446019 -
I was recently hacked so I had to change to another email account and now iCloud won't let me back up because it is still only allowing the old email acct to be the main one. How can I switch to a new email account for my iCloud?
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button) -
I had to change my email addy due to too many hackers.. it was my apple id and my icloud and my imessage log in as well as face book
I deleted it after i created a new one.. I made the new one my apple id and my icloud id and imessage
However imessage does not work right now and Icloud has me log in with the new one and then when i am in askes me for the password with my old log in greyed out.... I have tried my new pass word as well as my old one.. neither workTry temporarily recreating the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. Now try using your current password when you are prompted for the password for the old ID. If successful, you can go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.
-
Changes to User Extensible Policies not working
I'm having some difficulty with User Extensible Policies being applied on
Windows XP machines. We've been using these policies/machines for some
time without a problem. However, when I make a change to one of the
policies, the change is not reflected on the XP machines (works fine on
W2k, and W98 machines). The main changes I've been making are with the
Allowed Applications parameter.
Also, this particular client limits logins to 1 per user. I've also
noticed that the XP machines don't pick up the change when I increase the
login limit from 1 to 2 (they still give me the error message upon
attempting to login indicating the user has exceeded the maximum allowable
logins, even though there's only 1 active login for this particular
user). Again, I don't see this behavior from the W2k, or W98 machines.
I've tried completely removing the client and reinstalling and completely
recreating the user profile. When removing the client, I made sure there
were no left over policies on the local machine before reinstalling. Upon
reinstalling the client, policies are pulled down and applied, but they
are the version of the policies before the changes were made. (I"ve tried
client versions 4.9, and 4.9 sp1. I couldn't get 4.9sp2 to install
properly, but I'm still working on that one)
It's as if the XP workstations aren't properly reading changes in NDS.
I'm wondering if some automatic update has been applied that has broken
some Novell functionality somewhere.
Has anyone experience this problem yet?
Zen 3.2, sp3
Thanks,
Kenny FranklinYou were dead on. Group Policies worked perfectly. Thanks a bunch!
On a side note, this particular site has three sets of policies enabled:
1 to allow access to a certain list of apps
2 to allow access to a different list of apps
3 to allow access to all apps.
When I modify the Group Policy for the first user package, it duplicates
the same settings for the second user package (i.e. it's reading from the
same policy file). Do I need to specify different policy paths for each
user package to have separate and distinct policies?
Thanks again,
Kenny
> Extensible Policies are not officially supported under Windows XP by
Microsoft
> and hence by Novell.
> You may want to give Group Policies a try.
>
> Try Forcing Policy Updates as shown here -
> http://support.novell.com/cgi-bin/se...?/10073744.htm
>
> [email protected] wrote:
>
> > I'm having some difficulty with User Extensible Policies being
applied on
> > Windows XP machines. We've been using these policies/machines for
some
> > time without a problem. However, when I make a change to one of the
> > policies, the change is not reflected on the XP machines (works fine
on
> > W2k, and W98 machines). The main changes I've been making are with
the
> > Allowed Applications parameter.
> >
> > Also, this particular client limits logins to 1 per user. I've also
> > noticed that the XP machines don't pick up the change when I increase
the
> > login limit from 1 to 2 (they still give me the error message upon
> > attempting to login indicating the user has exceeded the maximum
allowable
> > logins, even though there's only 1 active login for this particular
> > user). Again, I don't see this behavior from the W2k, or W98
machines.
> >
> > I've tried completely removing the client and reinstalling and
completely
> > recreating the user profile. When removing the client, I made sure
there
> > were no left over policies on the local machine before reinstalling.
Upon
> > reinstalling the client, policies are pulled down and applied, but
they
> > are the version of the policies before the changes were made. (I"ve
tried
> > client versions 4.9, and 4.9 sp1. I couldn't get 4.9sp2 to install
> > properly, but I'm still working on that one)
> >
> > It's as if the XP workstations aren't properly reading changes in NDS.
> > I'm wondering if some automatic update has been applied that has
broken
> > some Novell functionality somewhere.
> >
> > Has anyone experience this problem yet?
> >
> > Zen 3.2, sp3
> >
> > Thanks,
> >
> > Kenny Franklin
>
> --
> Craig Wilson
> CNE3, 4, 5 - MCSE - CCNA
> NSC Sysop (http://support.novell.com/forums/)
>
> Tech Writer - http://www.ithowto.com
> (I Peter 4:10)
>
> -
Greetings everyone! We are running an external OpenLDAP server which basically has the same type of instructions that an Active Directory config has. i.e. To get everything working I've had to follow Apple's posts about Active directory, the WIKI, clearTextAuth, etc.
Everything is working great, but when the final notification email is sent out to the users, the administrators get the emails, but no users from my external directory get the email.
When you look at the email to field on the message to administrators it has and . So it's like PcP is trying to pass an email through, but failing. On a side note I can see the users email in the Info pane of workgroup manager. Any ideas on where to look next on this or anyone else having this problem? Certain logs?
Thanks for any help!
SteveSo I've been doing more tests. Maybe this will help diagnose a little more:
The users email is appearing in workgroup manager under /Info / Email Address.
I have changed the audience workflow property to one of my test email addresses - the message sends to the audience correctly.
I have modified a workflow and changed to $$User Email Address>> to explicitly be an email as opposed to the variable - the email was sent to the user, but the user's name was not in the email header. Instead it displayed the same as before: [email protected], , [email protected] I also looked at the results in the xgridagentd log under the console and the address showed up correct there.
If I do not explicitly put an email in as $$User Email Address>> the xgridagentd log shows something as follows:
Mon Feb 25 09:38:17 server.school.edu xgridagentd[43] : Notice: agent task "9964" started for user "podcastxgrid" executable "/usr/bin/pcastaction" arguments (\n mail,\n "--basedir=/Shared Items/Podcasts/Recordings/FD5ED310-A75B-45F2-8BC6-83F0D9F123AF",\n "--from=",\n "--to=[email protected],,[email protected]",\n "--smtp=smtp-auth.school.edu",\n "--body_file=mail.txt"\n)
Mon Feb 25 09:38:18 leo.gac.edu xgridagentd[43] : Notice: agent task "9964" finished for user "podcastxgrid" executable "/usr/bin/pcastaction" arguments (\n mail,\n "--basedir=/Shared Items/Podcasts/Recordings/FD5ED310-A75B-45F2-8BC6-83F0D9F123AF",\n "--from=",\n "--to=[email protected],,[email protected]",\n "--smtp=smtp-auth.school.edu",\n "--body_file=mail.txt"\n)
Notice that the from and to are blank.
I am using an external SMTP server, which we already have running and at least seems to be sending to whoever I explicitly list. It seems like the $$User Email Address>> variable is not getting any info.
Let me know if you have any ideas! Any other logs to check?
Thank you to any ideas. I am stumped! -
Change or Update Email Address
There seems to be no option of updating or changing a users email address. How can this be done? I looked at changing my profile with no success.
Here's the info from the OTN FAQ:
Membership Information
Q: How do I change the e-mail address in my membership profile?
A: OTN's membership management system does not let you change your email address in your membership profile. Please create a new account with the new email address you wish to use. -
Trying to restore music that was lost when I changed my user name.
I changed my user email address a while ago and since I have lost access to a ton of my music. I still have the files on my computer but when I try and access them I get a message that they need to be verified. I cannot VERIFY them because the email address it is asking for no longer exists. I have ignored this issue for a while but I am quite over it. Please advise.
I do have the music on an old ipod but I don't see why I should have to pay for a program to pull the music and movie off when it's Itunes and Apple's fault I don't have access.Have you tried resetting your apple id password and then changing your email address to a newer one?
Try:
https://appleid.apple.com
Click reset password:
enter the email address you used to use and then if you provided security questions / answers when you signed up initially you can answer them and then change your password.
Once you have changed your password you should then be able to log in and then change your email address. -
Change User Name But Not Email SBS 2003
Greetings,
I need some help. I have a user that got married and wants to change her last name because she sends email from Outlook and it shows her old last name. I would like to change her user name but keep her email address the same.
On SBS 2003 from Server Management -> Users, if you rightClick a user and select "Rename" from the popup menu, you can change the first and last name and leave the email as is. The user name will change and the email address stays the same in
the user list when the edit window closes.
I would like to do this if there are no repercussions such as email folders disappearing or unaccesable or any other changes to anything other than the user name.
What will happen if i change the user name as I descirbed above. Will it mess up any of the users access. permissions, etc?
Thanks very much for your help!
LewisHi Lewis:
If I understand what you mean, you would like this user to receive mails addressed to "old-name" and send mails with the reply address as "new-name".
To do this, open Active Directory Users and Computers, find the user, right click - properties, email addresses.
Add the new email address and set it as default. Uncheck the box to update based on recipient policy.
You can also change the users name in the SBS console, but if you just change the email address there emails addressed to old-name will not be received. So in the console, just change the users name for logon and user name to new-name, but not the
email address. Just add one in ADUC.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit. -
After I converted to iOS5, the iCloud user name on my iPad is set to my email address, not my iCloud User ID. How can I change it. It's correct on my iPhone and MacBook.
You'll need to save the documents first from the incorrect iCloud account, sign out then sign in to the correct iCloud account and upload the documents to that account.
-
I changed emails. My user ID will not let me get into my phone to do any updates, but the user id is associated with an email address that no longer exists
What a mess the Apple ID, and associating emails, ID etc has got itself in
I have a new iPad but after 2 days of trying all sorts still can't sync it because it is says it is associated to the other via the iCloud
I can't use my alternate email address to setup a new Apple ID account as it says it's already used or associated, but I haven't knowingly done anything
One message says "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
I am at a complete loss on what to do -
I changed my email address and my user id will not update for icloud!
Yes, I went into the Appleid and updated the email address there. The problem?? Icloud on my Iphone 4! It does not allow you to change the User ID in settings! I've tried going to store and sign out and sign back in. Did not work! Has anyone else had this issue??
If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
This started happening about 7-10 days ago. I use Horde to get mail online. Suddenly, when I would hit reply or forward the original email would not be quoted. I had changed nothing in any of my preferences.
Since then, it has been spotty and intermittent. Sometimes, reply is fine; other times, nothing. Sometimes, reply will not even paste in the person's email or the subject line. Same with forward. Sometimes, it is fine. Mostly, it is not. There are three settings for forward: entire message, Body Text and Body Text with attachment. The original message will often be quoted using Body Text or Body Text with attachment, but not Entire Message. However, at least 50% of the time it will not come up using anything. I had my ISP check this since it seemed to be synchronous with a PHP upgrade they applied to the server. However, the tech could find nothing and there seemed to be no problem using Chrome.
Any ideas?
ThanksThis is an extremely weird issue! I would suggest safe mode.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Need help to change user email id in table ADR6
Hi,
i want to update user email id in table adr6. i hv written following code but not working to change email in table adr6.
DATA lo_nd_email TYPE REF TO if_wd_context_node.
DATA lo_el_email TYPE REF TO if_wd_context_element.
DATA ls_email TYPE wd_this->element_email.
DATA lv_mail_id LIKE ls_email-mail_id.
navigate from <CONTEXT> to <EMAIL> via lead selection
lo_nd_email = wd_context->get_child_node( name = wd_this->wdctx_email ).
get element via lead selection
lo_el_email = lo_nd_email->get_element( ).
get single attribute
lo_el_email->get_attribute(
EXPORTING
name = `MAIL_ID`
IMPORTING
value = lv_mail_id ).
DATA:lv_bname TYPE BAPIBNAME-BAPIBNAME.
DATA:lt_return TYPE TABLE OF bapiret2.
DATA:PER_NO TYPE AD_PERSNUM,
ADDR_NO TYPE ADRC-ADDRNUMBER."AD_ADDRNUM.
DATA:SEARCH TYPE REF TO IF_WD_CONTEXT_NODE.
SEARCH = WD_CONTEXT->GET_CHILD_NODE( 'USER' ).
SEARCH->GET_ATTRIBUTE( EXPORTING NAME = 'BNAME'
IMPORTING VALUE = lv_bname ).
DATA:wa_address TYPE bapiaddr3.
DATA : CONS_NO TYPE AD_CONSNUM.
IF lv_mail_id IS INITIAL.
get message manager
DATA lo_api_controller TYPE REF TO if_wd_controller.
DATA lo_message_manager TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
message_manager = lo_message_manager.
report message
CALL METHOD lo_message_manager->report_error_message
EXPORTING
message_text = 'Please Enter Email Id'.
ENDIF.
DATA:l_addr type addr_keynr.
DATA:C_YES(1).
CLEAR:C_YES.
C_YES = 'X'.
TYPES: ty_comm_smtp TYPE adsmtp ,
ty_returncode TYPE SZAD_FIELD-RETURNCODE,
ty_error TYPE ADDR_ERROR,
adsuse TYPE ADSUSE.
DATA:EMAIL_ID TYPE AD_SMTPADR,
lt_comm_smtp TYPE STANDARD TABLE OF ty_comm_smtp, """"Data Object
lv_returncode TYPE STANDARD TABLE OF ty_returncode,
error_table TYPE STANDARD TABLE OF ty_error,
lt_adsuse TYPE STANDARD TABLE OF adsuse.
data:ls_comm_smtp like LINE OF lt_comm_smtp,
ls_returncode like LINE OF lv_returncode .
CALL FUNCTION 'SUSR_USER_ADDRESSKEY_GET'
EXPORTING BNAME = lv_bname
IMPORTING PERSNUMBER = l_addr-persnumber
ADDRNUMBER = l_addr-addrnumber
EXCEPTIONS ADDRESS_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
REFRESH: lt_comm_smtp.
CALL FUNCTION 'ADDR_PERS_COMP_COMM_GET'
EXPORTING
address_handle = ''
address_number = l_addr-addrnumber
person_handle = ''
person_number = l_addr-persnumber
DATE_FROM = '00010101'
LANGUAGE = SY-LANGU
table_type = 'ADSMTP'
iv_current_state = space "*981i
IMPORTING
returncode = ls_returncode
TABLES
comm_table = lt_comm_smtp
error_table = error_table
et_usage = lt_adsuse "*981i
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
person_not_exist = 3
internal_error = 4
OTHERS = 99.
IF sy-subrc <> 0.
IF sy-subrc = 1 OR sy-subrc = 2 OR sy-subrc = 3.
raise_message 'AM' 'A' 885 'ADDR_PERS_COMP_COMM_GET' space
space space internal_error.
ELSE.
same_message_dia_a internal_error.
ENDIF.
ENDIF.
ENDIF.
CLEAR:ls_comm_smtp, email_id.
READ TABLE lt_comm_smtp INTO ls_comm_smtp INDEX 1.
EMAIL_ID = ls_comm_smtp-smtp_addr. """""""OLD EMAIL ID which we get from ADDR_PERS_COMP_COMM_GET
CONS_NO = ls_comm_smtp-CONSNUMBER.
CLEAR:ls_comm_smtp.
ls_comm_smtp-CONSNUMBER = CONS_NO.
ls_comm_smtp-FLGDEFAULT = 'X'.
ls_comm_smtp-HOME_FLAG = 'X'.
ls_comm_smtp-UPDATEFLAG = 'U'.
ls_comm_smtp-smtp_addr = lv_mail_id.
TRANSLATE email_id TO UPPER CASE.
ls_comm_smtp-smtp_srch = email_id.
REFRESH :lt_comm_smtp.
append ls_comm_smtp to lt_comm_smtp.
IF SY-SUBRC = 0.
CALL FUNCTION 'ADDR_PERS_COMP_COMM_MAINTAIN'
EXPORTING
address_handle = ' '
address_number = l_addr-addrnumber
person_handle = ' '
person_number = l_addr-persnumber
table_type = 'ADSMTP'
iv_time_dependence = C_YES "*981i
IMPORTING
returncode = ls_returncode
TABLES
comm_table = lt_comm_smtp
error_table = error_table
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
person_not_exist = 3
internal_error = 4
OTHERS = 99.
IF sy-subrc <> 0.
EXIT.
ENDIF.
ENDIF.
IF sy-subrc = 0.
COMMIT WORK.
ENDIF.
i hv also tried second approch available on sdn CALL FUNCTION 'ADDR_COMM_MAINTAIN'. but in this fm person number we can't pass.
please help meHi Abhilesh,
You can use the following FM's to update the Email ID. There are many posts ADDR* FM using for updating Email ID. Please have a look if you have a doubt.
DATA: iadsmtp TYPE adsmtp OCCURS 0 WITH HEADER LINE.
"Retrieving Address Details
CALL FUNCTION 'ADDR_COMM_GET'
EXPORTING
address_number = addrnr
table_type = 'ADSMTP'
TABLES
comm_table = iadsmtp
EXCEPTIONS
OTHERS = 0.
READ TABLE iadsmtp index 1.
if sy-subrc is initial.
iadsmtp-SMTP_ADDR = 'new mail ID'. " Here pass your New Email ID
Modify iadsmtp.
Endif.
CALL FUNCTION 'ADDR_COMM_MAINTAIN'
EXPORTING
address_number = addrnr
table_type = 'ADSMTP'
substitute_all_comm_data = 'X'
TABLES
comm_table = iadsmtp
EXCEPTIONS
OTHERS = 0.
Then call FM 'ADDR_SINGLE_SAVE' to do the Commit. -
Mail Per User Quotas Not Working
We just migrated from 10.9 server to the new 10.10 server and noticed that our per user mail quotas were no longer working. If I change the Server app - Mail setting - to have a global mail quota on it work, however, we have a few accounts that we need to leave unlimited and the per user quota will not override the global quota. So far we have had to leave the global quota disabled because of this.
Even without global quota turned off - trying to set per user mail limits is still not working. We are changing it thru the Server app and clicking users - selecting a user - then select edit mail options - and changing the setting for the limit size. No matter what we set it to - it will not work.
Does anyone know what command or how to change the per user quota limits from the command line? I found that Dovecotadm quota -u username shows you what the quota is, but I am stumped as how to change it via a command line or thru another method since the server app is not working.
Any help would be appreciated!
ps. Also posted my doveconf -n file below, but I am missing if there is anything not configured properly.
bash-3.2# dovecot -n
bash: dovecot: command not found
bash-3.2# doveconf -n
# 2.2.5: /Library/Server/Mail/Config/dovecot/dovecot.conf
# OS: Darwin 14.1.0 x86_64 hfs
aps_topic = com.apple.mail.XServer.a1c54f6d-f4ad-4431-b882-0f11570dd637
auth_mechanisms = cram-md5 plain login
auth_socket_path = /var/run/dovecot/auth-userdb
auth_username_format = %n
debug_log_path = /Library/Logs/Mail/mail-debug.log
default_internal_user = _dovecot
default_login_user = _dovenull
disable_plaintext_auth = no
first_valid_gid = 6
first_valid_uid = 6
imap_id_log = *
imap_id_send = "name" * "version" *
imap_urlauth_submit_user = submit
info_log_path = /Library/Logs/Mail/mail-info.log
log_path = /Library/Logs/Mail/mail-err.log
login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c
mail_access_groups = mail
mail_attribute_dict = file:/Library/Server/Mail/Data/attributes/attributes.dict
mail_location = maildir:/Library/Server/Mail/Data/mail/%u
mail_log_prefix = "%s(pid %p user %u): "
mail_plugins = quota zlib acl fts fts_sk
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave
mdbox_rotate_size = 200 M
namespace acl-mailboxes {
list = children
location = maildir:/Library/Server/Mail/Data/mail/users/%%u:INDEX=/Library/Server/Mail/Dat a/mail/shared/%%u
prefix = shared.%%u.
separator = .
subscriptions = no
type = shared
namespace inbox {
inbox = yes
location =
mailbox Drafts {
special_use = \Drafts
mailbox Junk {
special_use = \Junk
mailbox Sent {
special_use = \Sent
mailbox "Sent Messages" {
special_use = \Sent
mailbox Trash {
special_use = \Trash
prefix =
namespace list-archives {
list = children
location = maildir:/Library/Server/Mail/Data/listserver/messages/archive/lists/%%u:INDEX=/ Library/Server/Mail/Data/listserver/messages/archive/shared/%%u
prefix = archives.%%u.
separator = .
subscriptions = no
type = shared
passdb {
driver = od
passdb {
args = /Library/Server/Mail/Config/dovecot/submit.passdb
driver = passwd-file
plugin {
acl = vfile:/Library/Server/Mail/Config/dovecot/global-acls:cache_secs=300
acl_shared_dict = file:/Library/Server/Mail/Data/shared/shared-mailboxes
fts = sk
quota = maildir:User quota
quota_warning = storage=100%% quota-exceeded %u
quota_warning2 = storage=85%% quota-warning %u
sieve = /Library/Server/Mail/Data/rules/%u/dovecot.sieve
sieve_dir = /Library/Server/Mail/Data/rules/%u
stats_refresh = 30 secs
stats_track_cmds = yes
protocols = imap lmtp sieve pop3
quota_full_tempfail = yes
service auth {
extra_groups = _keytabusers
idle_kill = 15 mins
unix_listener auth-userdb {
user = _dovecot
service dns_client {
unix_listener dns-client {
mode = 0600
service imap-login {
inet_listener imap {
port = 143
inet_listener imaps {
port = 993
ssl = yes
service_count = 0
service imap {
client_limit = 5
process_limit = 200
service_count = 0
service indexer-worker {
user = _dovecot
service lmtp {
unix_listener lmtp {
mode = 0600
service managesieve-login {
inet_listener sieve {
port = 4190
service pop3-login {
inet_listener pop3 {
port = 110
inet_listener pop3s {
port = 995
ssl = yes
service pop3 {
client_limit = 5
process_limit = 200
service_count = 0
service quota-exceeded {
executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-exceeded .sh
unix_listener quota-exceeded {
group = mail
mode = 0660
user = _dovecot
user = _dovecot
service quota-warning {
executable = script /Applications/Server.app/Contents/ServerRoot/usr/libexec/dovecot/quota-warning. sh
unix_listener quota-warning {
group = mail
mode = 0660
user = _dovecot
user = _dovecot
service stats {
fifo_listener stats-mail {
mode = 0600
user = _dovecot
ssl = required
ssl_ca = </etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.chai n.pem
ssl_cert = </etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.cert .pem
ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL:!ADH:!eNULL
ssl_key = </etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.key. pem
ssl_key_path = /etc/certificates/mail.maxxx.com.3524D1A33970C65E8A8DFF78E757DDE3C66AED10.key.p em
userdb {
args = partition=/Library/Server/Mail/Config/dovecot/partition_map.conf global_quota=0 enforce_quotas=yes
driver = od
userdb {
args = /Library/Server/Mail/Config/dovecot/submit.passdb
driver = passwd-file
verbose_proctitle = yes
protocol lmtp {
mail_plugins = quota zlib acl fts fts_sk sieve
protocol lda {
mail_plugins = quota zlib acl fts fts_sk sieve push_notify
protocol imap {
mail_max_userip_connections = 20
mail_plugins = quota zlib acl fts fts_sk imap_acl imap_quota imap_zlib
protocol pop3 {
mail_max_userip_connections = 6I guess the problem didn't resolve itself, rather it has revealed that it is intermittent (my favorite kind).
What could made a message sent to a legitimate alias username not get picked up during the imap connection. I know the smtp server accepted the message (see logs above).
Maybe you are looking for
-
My wireless keyboard and mouse do not work on my All-In-One computer?
Q.: My wireless keyboard and mouse do not work on my All-In-One computer? A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps. 1. Make sure the computer is on, plu
-
Ichat problems over apple network
We have 2 WDS network participating airport express base stations connected to the internet via Comcast cable. The network is really fast and we never had a problem with multi-way video chatting inside or outside the house. Now that the family upgrad
-
Function module to change the date format
hi guys is there any function module to change the date format from 08/28/2007(mm/dd/yyyy) to August 28, 2007. regards vamsi
-
Can you run a PC Synth via the PC Emulator, on a MAC Version of Logic?
Hey guys, Odd question here ... I've got OSX 10.6.4 . I have Logic Pro 9 on it. I have a PC version of Nexus however. I've heard you can run PC programs on your Mac by getting some kind of PC emulator. I think it's Flip4Mac or something? Would that b
-
Dear All, I ma working with OAF 5.7h. I am facing a strange problem. I hav a date picker,the one where u hav a date icon on clicking of which the dâte picker opens up in a secondary modal window with the month and year in individual pulldown lists, [