10.6 OD Archive - Import to 10.5.8 Server

Hi Guys
We've recently had our 10.6.4 server crash and we're trying to restore the LDAP Archive to a spare 10.5.8 XServe. I don't think it can be done with lower versions so can anyone suggest a method we can go about this without losing passwords? We have 700+ Users with 4 IT Staff so manually entering names and passwords is something we're trying to avoid
Cheers
Maverick

maverickoconnell wrote:
Hi Guys
We've recently had our 10.6.4 server crash and we're trying to restore the LDAP Archive to a spare 10.5.8 XServe. I don't think it can be done with lower versions so can anyone suggest a method we can go about this without losing passwords? We have 700+ Users with 4 IT Staff so manually entering names and passwords is something we're trying to avoid
Cheers
Maverick
Your right, trying to restore a higher version to a lower version is not a good idea. However as you appear to have a legal copy of 10.6.4 Server and as this is not in use because that server is dead, you could use that license and installer disc to upgrade your 10.5.8 XServe to 10.6.4 and then restore your OD archive. You would probably want to reconfigure the upgraded XServe to better match the name, addresses, DNS, etc. of the server you are replacing before doing the restore.

Similar Messages

Sound lost during archive importation

Hi
I have a video archive, imported from a Sony DSR 500 camera, with 2 sound tracks. When I watch it on the "importation from a camera" panel, it is ok I can hear both of the sound tracks, one and two.
I imported it in Final Cut Pro X, and I simply lost the sound track 2. I can't hear it, and the 2nd green sound track is empty.
What can I do, or what did I do wrong before the import ?
Thank you.
Fred

There are some Audio options to either check or uncheck on the Import tab of the Preferences window under the Final Cut Pro menu. The options would present stereo or mono, remove silent tracks, etc. That's one place to look. The second is click on one of your clips in the event browser or timeline and look at the inspector window under the Audio tab. There are options there for presenting the audio as Dual Mono, Stereo, Surround Sound, etc. It may be your mic recorded stereo, but your camera was set to mono. Many cameras record in stereo but use an external mic that is mono. Assumming that all of that is okay, I would simply put on a set of headphones and plug them into your camera and play the clip there. Do you hear sound on both left and right? If so, then it would seem the problem really is in FCP X. I know from experience, when I only have one of the two audio tracks, I can usally fix it in the inspector window under the Audio tab in the Volume and Pan settings area and specifically in the Pan Mode drop down menu. Best wishes.
stephen

How can I prevent my Camera Archive import from being interrupted by timecode breaks?

I'm trying to create Camera Archives from my old mini-dv tapes. I have a Sony Handycam DCR-TRV22 connected via FireWire. When I start the Camera Archive import process, everything is fine for a while but then the process stops with a message about a break in the timecode preventing the archiving from completing.
Solutions to this problem I've seen online relied on changing import preferences in Final Cut 7. Unfortunately, I only have Final Cut Pro X and I'm not sure how to control this setting.
I don't really care about timecodes, I just want to dump the entire tape to disk so I have a backup of the tape but the timecode break is interrupting the process and making me get involved a lot more often during the import process.
Does anyone know how to force Final Cut Pro X to push through timecode breaks in a Camera Archive import?

To clarify, this problem is not simply making me get involved more, but is preventing the Camera Archive operation from completing.

Will RMAN delete archive log files on a Standby server?

Environment:
Oracle 11.2.0.3 EE on Solaris 10.5
I am currently NOT using an RMAN repository (coming soon).
I have a Primary database sending log files to a Standby.
My Retention Policy is set to 'RECOVERY WINDOW OF 8 DAYS'.
Question: Will RMAN delete the archive log files on the Standby server after they become obsolete based on the Retention Policy or do I need to remove them manually via O/S command?
Does the fact that I'm NOT using an RMAN Repository at the moment make a difference?
Couldn't find the answer in the docs.
Thanks very much!!
-gary

Hello again Gary;
Sorry for the delay.
Why is what you suggested better?
No, its not better, but I prefer to manage the archive. This method works, period.
Does that fact (running a backup every 4 hours) make my archivelog deletion policy irrelevant?
No. The policy is important.
Having the Primary set to :
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBYBut set to "NONE" on the Standby.
Means the worst thing that can happen is RMAN will bark when you try to delete something. ( this is a good thing )
How do I prevent the archive backup process from backing up an archive log file before it gets shipped to the standby?
Should be a non-issue, the archive does not move, the REDO is transported and applied. There's SQL to monitor both ( Transport and Apply )
For Data Guard I would consider getting a copy of
"Oracle Data Guard 11g Handbook" - Larry Carpenter (AKA Dr. Paranoid ) ISBN 978-0-07-162111-2
Best Oracle book I've read in 10 years. Covers a ton of ground clearly.
Also Data Guard forum here :
Data Guard
Best Regards
mseberg
Edited by: mseberg on Apr 10, 2012 4:39 PM

Getting Error while importing FULL SLD in PRD Server

Hi Experts,
I am trying to import FULL SLD into Production server from QA server. I have exported full SLD from QA server and then try to import the same in the Production. But, while importing it gives me a warning <b>"The selected ALL 1.0 full import belongs to the export line ALL which is not compatible with the export line(s) SAP_CR of previous imports. The data of the selected import may possibly interfere with the previously imported data."</b>
And it shows two options: CANCEL IMPORT, IMPORT ANYWAY
**All the servers are on Xi 7.0 sp08
Kindly Help...

Hi Ajay,
These errors as mentioned are because of different CR versions and as mentioned in the blog:
<i>1) the source system is not defined in the SLD 2) the target system is not defined in the SLD 3) the association already exist 4) the source system and the target system are in the system business system group</i>
Regards
Vijaya

Problem with importing par file in portal server 6.2

Hi everyone,
I got the following error when trying to import IFRAME provider into portal server 6.2.
Operation failed.
ERROR: provider element has no version attribute
Below is the command I used. I run it as a file - I supply the password at the command line.
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier,dc=com" password $1 IFRAMEProvider.par dc=accesscollier,dc=com provider=IFRAMEProvider.
This used to work in Portal Server 6.0. I looked through the Portal Server 6.2 Desktop Customization Guide and the Developer guide for portal 6.2 but did not find any reference to version number.
Thanks.
Klara Hribkova
I

Hi Ulf,
here is the command + options. It is in a file, I supply the password on the command line. This used to work fine with PortalServer 6.0.
!/bin/ksh
echo "----------------------------------"
echo "USE: import_providers.sh password "
echo "----------------------------------"
#echo "Importing IFRAMEProvider ..."
#/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscolier,dc=com" password $1 IFRAMEProvider.par
dc=accesscollier,dc=com provider=IFRAMEProvider
echo "Importing IFRAMECalendarProvider ..."
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier,dc=com" password $1 IFRAMECalendarProvi
der.par dc=accesscollier,dc=com provider=IFRAMECalenderProvider
echo "Importing IFRAMEMailProvider ..."
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier, dc=com" password $1 IFRAMEMailProvider
.par dc=accesscollier,dc=com provider=IFRAMEMailProvider
echo "Importing JSPWebAppProvider ..."
/opt/SUNWps/bin/par import verbose overwrite runasdn uid="amAdmin,ou=People,dc=accesscollier, dc=com" password $1 JSPWebAppProvider.
par dc=accesscollier,dc=com provider=JSPWebAppProvider
These are the errors I get:
# ./import_providers1.sh solurute
./import_providers1.sh: !/bin/ksh: not found
USE: import_providers.sh password
Importing IFRAMECalendarProvider ...
AUTHENTICATING
uid=amAdmin,ou=People,dc=accesscollier,dc=com
solurute
AUTHENTICATED - Setting DN - dc=accesscollier,dc=com.
Initializing for operation - dpnode=dc%3Daccesscollier%2Cdc%3Dcom,provider=IFRAMECalenderProvider.
Operation failed.
ERROR: provider element has no version attribute.
Importing IFRAMEMailProvider ...
AUTHENTICATING
uid=amAdmin,ou=People,dc=accesscollier, dc=com
solurute
AUTHENTICATED - Setting DN - dc=accesscollier,dc=com.
Initializing for operation - dpnode=dc%3Daccesscollier%2Cdc%3Dcom,provider=IFRAMEMailProvider.
Operation failed.
ERROR: provider element has no version attribute.
Importing JSPWebAppProvider ...
AUTHENTICATING
uid=amAdmin,ou=People,dc=accesscollier, dc=com
solurute
AUTHENTICATED - Setting DN - dc=accesscollier,dc=com.
Initializing for operation - dpnode=dc%3Daccesscollier%2Cdc%3Dcom,provider=JSPWebAppProvider.
Operation failed.
ERROR: provider element has no version attribute.
This is the build_par.xml file:
<?xml version="1.0"?>
<project name="Provider" default="all" basedir=".">
<property name="par.dir" value="./pars"/>
<property name="iframe.dir" value="iframeprovider"/>
<property name="iframecalendar.dir" value="iframecalendarprovider"/>
<property name="iframemail.dir" value="iframemailprovider"/>
<target name="iframe">
     <jar jarfile="${par.dir}/IFRAMEProvider.par"
          basedir="${iframe.dir}"
          includes="**/*">
          <manifest>
          <attribute name="PS-Version" value="1"/>
               <attribute name="PS-DefaultEntry" value="IFRAMEProvider"/>
               <attribute name="PS-PBFileRoot" value="pbfiles"/>
               <attribute name="PS-StaticRoot" value="static"/>
               <attribute name="PS-DPRoot" value="dp"/>
               <section name="dp/IFRAMEProvider.xml">
                    <attribute name="PS-EntryName" value="IFRAMEProvider"/>
                    <attribute name="PS-Include" value="pbfiles/providerClassBaseDir/k20portal.properties(1),com/hangingvalley/sunportal/util/K20PortalProperties.class(1),com/hangingvalley/sunportal/util/OrgProperties.class(1),pbfiles/templateBaseDir/default/IFRAMEProvider/iframecontent.jsp(1),pbfiles/templateBaseDir/default/IFRAMEProvider/iframedoedit.jsp(1),pbfiles/templateBaseDir/default/IFRAMEProvider/iframeedit.jsp(1)"/>
               </section>
          </manifest>
     </jar>
</target>
<target name="iframecalendar">
     <jar jarfile="${par.dir}/IFRAMECalendarProvider.par"
          basedir="${iframecalendar.dir}"
          includes="**/*">
          <manifest>
               <attribute name="PS-Version" value="1"/>
               <attribute name="PS-DefaultEntry" value="IFRAMECalendarProvider"/>
               <attribute name="PS-PBFileRoot" value="pbfiles"/>
               <attribute name="PS-StaticRoot" value="static"/>
               <attribute name="PS-DPRoot" value="dp"/>
               <section name="dp/IFRAMECalendarProvider.xml">
                    <attribute name="PS-EntryName" value="IFRAMECalendarProvider"/>
                    <attribute name="PS-Include" value="pbfiles/templateBaseDir/default/IFRAMECalendarProvider/iframecontent.jsp(1),pbfiles/templateBaseDir/default/IFRAMECalendarProvider/iframedoedit.jsp(1),pbfiles/templateBaseDir/default/IFRAMECalendarProvider/iframeedit.jsp(1)"/>
               </section>
          </manifest>
     </jar>
</target>
<target name="iframemail">
     <jar jarfile="${par.dir}/IFRAMEMailProvider.par"
          basedir="${iframemail.dir}"
          includes="**/*">
          <manifest>
               <attribute name="PS-Version" value="1"/>
               <attribute name="PS-DefaultEntry" value="IFRAMEMailProvider"/>
               <attribute name="PS-PBFileRoot" value="pbfiles"/>
               <attribute name="PS-StaticRoot" value="static"/>
               <attribute name="PS-DPRoot" value="dp"/>
          <section name="dp/IFRAMEMailProvider.xml">
                    <attribute name="PS-EntryName" value="IFRAMEMailProvider"/>
                    <attribute name="PS-Include" value="pbfiles/templateBaseDir/default/IFRAMEMailProvider/iframecontent.jsp(1),pbfiles/templateBaseDir/default/IFRAMEMailProvider/iframedoedit.jsp(1),pbfiles/templateBaseDir/default/IFRAMEMailProvider/iframeedit.jsp(1)"/>
               </section>
          </manifest>
     </jar>
</target>
<target name="all" depends="iframe,iframecalendar,iframemail"/>
</project>
Thank you very much for your assistance and for your time.
Klara

Is there a way to import contacts from an email server to an iphone?

Is there a way to import contacts from an email server to an iphone?

not that I'm aware of.

Periodic Importing of data from SQL Server into Oracle Database

I would like to know how I can use the SQL Developer tool to import data from a SQL Server database across the internet into an Oracle Database on a periodic basis? I understand there is a Migration Workbench, but it seems to be only a one off activity.
What I would really like is to be able to import data for example, very 30 minutes from multiple tables/views in a SQL Server Database into an Oracle Database (overwriting or modifying existing same data) without the need for Heterogeneous Connectivity, as my Oracle Database is not my LAN.
Thank you for your kind ideas and suggestions.

To be honest the best way to do it is DG4ODBC or DG4MSQL. All other solutions need manual interaction.
The gateways DG4ODBC and DG4MSQL are independant from the Oracle database and also from the SQL Server location. In a worst case scenario you have an Oracle database on machine A, the gateway on machine B and the SQL Server on machine C.
Gateways were built to exactly do what you want. As you have access to the Oracle database the only part you need to define within the Oracle database is a db link. If you specify the full tns connect identifier there is even no need to edit the tnsnames.ora file.
Even if you excluded the gateway in your last sentence the best solution would be the gateway.
Another option you can use is the SQL Server linked server mechanism. It allows you to link another server using OLEDB driver. In your case you can then link the Oracle db into your SQL Server and then insert/update/delete and select Oracle tables from the SQL Server. Using now a trigger will replicate the data immediately to the Oracle db.

Import HL7 data in sql server using ssis

Could I know how to import HL7 data in sql server using ssis.
I am not aware of any .NET code.
Could someone provide me with any kind of custom code so I can try to understand and use it to my specifications.
Thanks
Latha

As COZYROC said, HL7 is a type of EDI file. There is nothing built into SQL Server to handle this type of parsing. You will either need to buy something or write your own, which I do not recommend because it is much more difficult than you imagine.
You can use BizTalk to parse the data into an XML format which can then be processed by SQL Server.
http://msdn.microsoft.com/en-us/library/bb981217(v=bts.10).aspx

Import same documents for content server

Good afternoon ,
I need import same documents for the content server , I have one cd wich 400 imagens in pdf all on contrat , i want import all for the content server. how i get this ?
att
Angelo

Hi
The documentation for the batchloader and all the intricacies related to it can be found in the documentation for the components of the CS which is under /weblayout/help/documentation.
A sample batchloader file looks as given below:
Action = insert
dDocName=11gAdminGuide
dDocTitle=11gAdminGuide
dDocAuthor=sysadmin
dSecurityGroup=Public
dDocAccount=New
dDocType=ADACCT
dInDate=6/12/08 3:45 PM
dAnnouncement=Test1
primaryFile=C:/Documents and Settings/srmenon/Desktop/batchtets/11gAdminGuide.pdf
<<EOD>>
dDocName=11gPerfTuning
dDocTitle=11gPerfTuning
dDocAuthor=sysadmin
dSecurityGroup=Public
dDocAccount=New
dDocType=ADACCT
dInDate=6/12/08 3:45 PM
primaryFile=C:/Documents and Settings/srmenon/Desktop/batchtets/11gPerfTuning.pdf
<<EOD>>
dDocName=adminguideldap
dDocTitle=adminguideldap
dDocAuthor=sysadmin
dSecurityGroup=Public
dDocAccount=New
dDocType=ADACCT
dInDate=6/12/08 3:45 PM
primaryFile=C:/Documents and Settings/srmenon/Desktop/batchtets/adminguideldap.pdf
<<EOD>>
This is for checkin that the file has been created and hence the insert is used in the Action variable. It could be replace,delete as per the needs.
Thanks
Srinath

Problem importing users from LDAP (AD) server in administration tool.

Hello,
I have a problem integrating an LDAP server in the Security Manager of the Administration tool.
When trying to import users from an LDAP Server, i receive this error>
"53002 - LDAP server referral is not supported."
[http://download.oracle.com/docs/cd/E05553_01/books/AnyMsg/AnyMsg_Messages22.html]
The configuration of the LDAP server is correct because i receive this message after configuring the connection>
"LDAP Server connected succesfully".
The version of the Oracle Administration Tool is> 10.1.3.4.1.090414.1900
The specifications of the LDAP server are> Active Directory service in Microsoft Windows 2003 Server R2 x64.
Thank you for the Support.

Hello,
Please refer to the following KBAs, may be this can helps you:
http://service.sap.com/sap/support/notes/1818711
http://service.sap.com/sap/support/notes/1816595
http://service.sap.com/sap/support/notes/1809036
Regards,
Asma CHAOUACHI

Standard report which importe personnel number from one server to other

Dear Hcm Gurus.
Is any standard report exist in SAP Which imports Personnel number from one server to other server which are maintained in Source server ,imported all contents maintained in source server.
e.g An employee is hired in u201C Server Au201D and personnel number is generated internally while we want to imports same employee data with same personnel number in Server u201CBu201D
IS it possible ? if is kindly do help and clarify any standard report which import complete data from one server to other server with all its infotypes.
barket

Hi,
a standard way should be setting up an ALE scenario between the two systems to transfer employee data and keep them updated. This needs a bit more set up than a single report to be run but it is a common way to create HR landscapes where different local HR systems consolidate data to a centralized system.
The other options are valid, too. But I know them more for transfering data for test or validation reasons.
If you could add some more information to the business background of your requirement we could add give a better suggestion which solution to head for.
Kind Regards
Roman

How do I import email messages from another server?

Heya,
So I can't figure out how to import mail messages from another server into this one? I had [email protected] pointing to the old one, when I repointed it obviously all my email "disappeared" because there is none on the new server. So how do I move it from the old server to the new one? Usually I'd just drag and drop the email message files over FTP but SLS doesn't seem to give me permission to do that on this one.
Thanks!

Search for discussions of the imapsync tool.

Archiver Import & Indexing is running very slow

Dear All,
We have OracleTextSearch search engine configured for Metadata only indexing. The server specs for application and database machines are way high & underutilized.
FileStoreProvider is used to store content in WEBLESS mode on a filesystem.
Our Archiver Exports are quite fast but Imports are pathetically slow. We suspect that the Indexing is the culprit.
Indexer is configured for 25 items per batch, 1000 items per checkpoint.
What various factors do you think can slow down the Indexer?
We have several content stuck in GENWWW due to an earlier bug in DIS Outlook integration. Could those be an issue and is there a way to move them to released state.
Regards,
Prateek

Hi Prateek,
I'm a bit confused with this statement "We have OracleTextSearch search engine configured for Metadata only indexing." OracleTextSearch is a full text indexer. How would you configure OTS itself as "metadata only" indexing? I would think that instead of using OTS, it would be more efficient to set the SearchIndexerEngine to "DATABASE.METADATA". Maybe this is the case already, but I'm just puzzled by the statement.
Indexing just metadata, though, should not be that performance intensive. There are a couple of things that jump out.
- File system access with regards to read/write. Even though you are using a webless state for STORAGE, the actual files being indexed would have to be resident on the file system during the indexing operation (unless the process has changed, which I don't think is the case, as the items are not indexed directly within the database itself. This would be true even though it's meta-only. It's just the way the product is written as I recall). You then would be subject to any other file system limitations, such as sufficient space, virus scanning, etc. Keep in mind that a txt file with the index value gets written, and this txt file is processed in the index insert/update operation. Slow writes/reads of this file would affect the process.
I point out the file system since the observation was made that the system is relatively underutilized. I've seen many high-end processor/memory configurations get sabotaged with slow disk/SAN/NAS access.
- Database access/performance. If searches are slow in addition to the indexing being slow, I'd think you'd be well served by looking at the database for some maintenance operation, like recomputing statistics, rebuilding indexes, etc.

AVCHD archive importing questions

Hello. I have a Canon HF10. I am new to video editing and am just now digging in to learn iMovie, so up until tonight, I've been recording on the camera, and when I need space on the camera, simply moving the entire folder structure on the camera's internal hard drive to a firewire external drive. Now I have iMovie 09 and I'm ready to start using that footage.
My understanding is at this point I would need to use the "import camera" archive feature. When I do that it asks me to find the archive, so I go to the original folder structure on my external drive and try to select the folder with all the footage (I'm actually unclear which folder this would be as I see AVCHDTN folder, BDMV folder, CANON folder, and there are files and/or folders inside of each of these), but each folder has all its items greyed out and when I try to select any of them iMovie returns the following error:
Folder is Not a Camera Archive
Please select a folder that is a camera archive, then click Import.
What am I doing wrong?

I ran into this myself. I had to quit and re-launch iMovie to get it to import my archive. You might want to reboot your computer as well.
When you re-launch iMovie got to the root level of the archive which should be the name of your camera. You might have to re-launch a few times to get it to work.

10.6 OD Archive - Import to 10.5.8 Server

Similar Messages

Maybe you are looking for