[10.7.1] Not fix bug login screen!

The latest update (10.7.1) does not fix the bug on the login screen. There is still need to disable the 'automatic gearbox graphics card'!

Similar Messages

Boot screen resolution does not match the login screen on retina

Boot screen resolution does not match the login screen on MBP retinas if you've set your resolution to hi-res thus resulting a flickering at login screen appearing instead of that nice login screen animation, due to I believe screen resolution change...
is there a way to change boot screen resolution (times before login screen)???
Or do we have to wait for apple to push an EFI update for this problem?
Thanks in advance

No one having this issue?
please some one at least confirm this so I know thats not my setup spesific problem?

4.2.1 Does Not Fix" Crash-on-screen saver" bug or metadata issues

ATV2 crashes as soon as it goes to screen saver. 4.2.1 does not fix this. WTC?
You have to set screen saver to "Never" to prevent crashing.
No one checks these things?
Message was edited by: Mike Kwiatkowski

Mike Kwiatkowski wrote:
ATV2 crashes as soon as it goes to screen saver. 4.2.1 does not fix this. WTC?
Metadata issues still hosed.
Not seen the screensaver issue.
Personally I think this update was a patch to fix the DVI flickering issues that rendered the device unusable for many people - other annoyances can be fixed later but we better keep reminding them:
http://www.apple.com/feedback/appletv.html

FileVault enabled accounts not shown on login screen

Hi everybody,
with some of our iMacs (all 14 of them are set up the same way) we have the following problem: When a new mobile network account is created (1st: create a network account on the OS X Server in its Open Directory database, then network user folder synced to local user folder on iMac) and this particular account is enabled to handle FileVault encryption of the local hard drive in „System Preferences“ -> „Security & Privacy“ -> „FileVault“ and even the output of
sudo fdesetup list
lists this special account, the user is not shown at the very first login screen (light gray). I deleted the local user and re-synced, I removed the account from the list of FileVault users and re-enabled the account - all to no avail.
Now I disable FileVault completely and will re-enable it later. That lasts hours…
Is there any more convenient way to fix this? May the „sync“ command of fdesetup be an option?
Hope, someone knows the answer or may even give me a hint.
Best regards from Hamburg
Olaf

I've looked at my system logs, and the difference between logging in connected to a wired and wireless network.
I seem to have an issue with keys on the wireless network.
Aug 7 08:46:24 MSM52 /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: SecKeychainItemCopyAttributesAndData() = -25308 (User interaction is not allowed.)
Aug 7 08:46:24 MSM52 /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: SecKeychainItemCopyAttributesAndData() = -25308 (User interaction is not allowed.)
Aug 7 08:51:07 MSM52 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSOpenNode(): dsOpenDirNode("/LDAPv3/10.10.10.23") == -14002
Aug 7 08:51:11 MSM52 kernel[0]: AirPort: Link Active: "mywireless" - 000d54a07d1c - chan 4
Aug 7 08:51:11 MSM52 configd[42]: SecKeychainFindGenericPassword err= -25308 ( =0xffff9d24, secErrStr=User interaction is not allowed. ) (current= mywirelessnet)
Aug 7 08:51:24 MSM52 /usr/sbin/AppleFileServer: TIME-CHECK: NSLXStandardRegisterService took 1.851997 seconds!\n
Since the key piece of information, well in English anyway, seems to be "User interaction not allowed." Any ideas how to resolve this?
I've opened Keychain Access, there does not appear to be anything bad about the entry for my wireless network. As a test, I changed "access control" to be unrestricted, but still no luck.
I then deleted the entry the entry in Keyword Access, and still see the same behavior.

Install failed due to loss of power and Yosemite will now not go past login screen. Help!

I recently tried to install OS X Yosemite. unfortunately during the install my laptop was unplugged and the installation failed mid way through. Each time I start my mac I get to login screen and after logging in get an error message and told to restart and try again - which does not resolve the issue. Guest login do work to the safari screen. Any help hugely appreciated.
The error message reads:
You need to restart your computer. Hold down the power button until it turns off, then Press the power button again.
Behind system code, including:
panic(CPU 2 caller 0xffffff 80005418bf):
"process 1 exec of /sbin/launchd failed, errno 45"@/sourcecache/xnu/xnu-1699.32.7/bsd/kern/kern_exec.c:3546
Debugger called: <panic>
Backtrace (CPU 2), Frame: Return Address
0Xffffff80e8423e00 : 0xffffff8000220792
7 more lInes like the one above
BSD process name corresponding to current thread: init
MAc OS version:
not yet set
THen kernel version data.

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Can not get to Login Screen. Possible User Account or .plist Corruption?

I was helping a client who is upgrading both her desktop and a laptop machine. She had already started the process and she had used the migration tool to move her user account from her old G4 to both her new Mac Pro and MacBook pro. So basically both new machines were now clones of the old G4 which was running Tiger.
Everything was going well and we were busy doing some other stuff when I suggested to her that she should set up a secondary user account on each machine. This is something I suggest to users, because I have seen user accounts get corrupted, and if that account is the ONLY account on the machine, you are not going to be able to do anything on that machine (easily). At least with teh other account, you can log in and see the drive, etc.
So she set up a new user and also enabled fast user switching and I was about to show her how the whole user switching works, but when we choose to log out of her current account, the Mac went to blue screen and just got hung up. After much waiting we had to force a hard shut down. Upon restart we see the Apple logo and then go to the blue screen, but we never reach the login screen.
I wrote this off as a fluke, but also told her that I am not to comfortable with that and decided to completely wipe the drive and do a fresh install of everything and not use the migration assistant. All is well with that machine now.
So we moved on to the Mac Book Pro and we repeated the same addition of a user and upon logout it did the exact same thing. So by now I am sure that something in the library form the old G4 must be corrupt, because both of these machines were basically clones of that one. So we are probably going to do the same thing to this one too, but I was wondering if I could learn something from this.
Assuming that some .plist is corrupted, ( probably the com.apple.loginwindow.plist) I was thinking I could access the drive through target mode, find that. plist and delete it. But then that made me think, if I were to delete it, what would the Mac do at startup if it sees no .plist of the login screen or user accounts?
Also, is there a way to alter the login options through single user mode. So for example I am quite sure that it is the .plist for the log-in options that is corrupted. So if I could change the login option to automatically log into her account, thus bypassing the login screen, I think we can bypass this issue for now.
Thanks.

First you don't delete the suspect .plist, you move or rename it. Deletion is down the road a piece
Second, when the system boots, it recreates any missing .plist files, presuming nothing else is wrong.
Many, including myself, have dragged the entire Preferences directory onto the desktop and rebooted without a problem.

Why changes are not made in login screen after changes in logon.css in OBIE

Hi,
I need to change the login screen with my own logo.and i referred the below links.I have made all the cahanges as mentioned in this link.
The heading is changing but the backgroundimage and colours are not changing.I have made all the changes as mentioned in this link.
can anyone help what is wrong and why i'm not getting the backgroung image and colour changed..Is there any other changes in logon.css or instanceconfig.xml
other than mentioned in this link.
http://santoshbidw.wordpress.com/2011/08/16/obiee-logon-screen-customization/
http://santoshbidw.wordpress.com/category/obiee-10g/obiee-10g-answers/customize-obiee-logon-image/
Thanks in advance

You have customised the skins/themes folder
$OBI_HOME/web/app/res/*
Depending on what webserver you are using you will also need to customise the skins/themes for the web application that is already deployed.
These are where you can find them:
OC4J: $OBI_HOME/oc4j_bi/j2ee/home/applications/analytics/analytics/res/*
WebLogic: $OBI_HOME/web/analytics/res/*
You will need to restart the presentation services to see the changes.
If you are manually deploying the application to the web server you will need to make your changes to the original app folder '$OBI_HOME/web/app/res/*' and then follow the below guide to create the web archive to deploy to the presentation server i.e. oc4j or WebLogic.
http://download.oracle.com/docs/cd/E12096_01/books/AnyInConfig/AnyInConfigSAW4.html#wp1119340

Will not go to login screen

I was using Facebook and has some other windows open at the same time. I guess I was not suppose to do this because now my computer will not go to the login screen and it just shows the blue screen.
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version: 1.14f5
Serial Number: W870**W0M
Sudden Motion Sensor:

Hi p,
I don't think that what you did was wrong; there was an issue with the MBP and with all that open, the issue manifested itself.
Try booting from your install disc (hold down the c key), open Disk Utility (in the Utilities menu), select your HD, and run Repair Disk.

MacBook Pro will not go past login screen/gray screen/gray Apple screen. Wheel keeps spinning.

I am pretty frustrated right now as anyone would be if this happened.
I was installing Anti-Virus onto my MacBook Pro and the installation finished but the computer froze. I force restarted the computer and it went all the way into my desktop, I could click on certain things but it was loading INCREDIBLY slow. The Anti-Virus opened and everything but the computer was just running much to slow and then froze again.
I hard reset the computer again because it was frozen. The first time I hard reset it went all the way to the login screen, I put my password in and the wheel would just spin. It just keeps spinning and spinning and spinning and spinning.
I hard reset the computer again. This time it gets to the Apple logo with the spinning under the logo. Just keeps spinning.
I hard reset the computer again. This time it gets past the spinning under the logo and isn't doing anything.
I hard reset the computer again. Get's all the way to the log in password screen, doesn't even let me put the password in just keeps spinning.
I continued to hard reset and get different screens each time.
I booted into safe mode. Did absolutely nothing for me but run incredibly slow and lag. I am not sure if that is normal or not, as I have never safe booted on a Mac. I reinstalled Mountain Lion after going into I think it was Recovery Mode (Command + R) and that did absolutely nothing for me after waiting over an hour. So now I am very frustrated as I need to do work for my class and this is just a major problem.
I even tried doing the Command + Option + P + R or whatever it was to reset those settings. Nothing is working.
Final projects and computers that don't want to work are not good.

Are you not able to install OS X, then? That is, the reinstall procedure does not work? If so, then you need to erase the drive then reinstall OS X.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

My Aspire 7750G does not show the login screen after upgrade to Windows 10

I have upgraded to Windows 10 on my 7750G and the update went thru smooth.But when I restart Windows it shows the windows screen with the moving dotted circle,the harddisk led stays on for a while, then starts flickering, and a blank screen is shown!After waiting - about 2 to 3 minutes - it goes directly to the lock screen, no login screen is shown.

joeboemoe,
The lock screen is where you login now, if I am not mistaken. The notebooks we have here boot to a lock screen we have to click to log in, even my PC at home does. If you want to take a look at this article we created, it might be what you are looking for.
I created a password for one of the logins on one of our notebooks and I had the option to choose Never under "If you've been away, when should Windows require you to sign in again?"

Screen sharing is not working at login screen

Hi:
I need a little help. I have a headless Mac (System A) that I just upgraded to Mountain Lion (not Mountain Lion Server) from Snow Leopard Server.
From another Mac (System B) running Mountain Lion I was previously able to use Screen Sharing to remotely acess System A's login screen. Now, after upgrading from SL Server to ML I can only use Screen Sharing to remotely control System A from System B AFTER I have already logged into System A using a direct attached keyboard and screen. In other words, I lost the ability to access the login screen on Sys A.
Anyone have any ideas here???

I was having the same issue. In my case, I had copied /System/Library/CoreServices/Screen Sharing.app to the /Applications folder, some time ago. I did this so I could more easily launch Screen Sharing via Spotlight. Because of this, when I launched Screen Sharing, I was executing the 'old' Screen Sharing app. I re-copied the 'new' app to /Applications, and all is well! Hope this helps!

Login Icon and shutdown icon not appearing on login screen

I don't know if it is just coincidence but I have had two instances where the login icon and the shutdown icon are not appearing on the login screen and the login screen is not "live" after I had installed an HP officejet 8600 printer on my W700ds to run through the network and another computer last night. The first time it happened last night I wasn't sure what to do so I held the power button until shutdown and when it rebooted and the RAID1 had to verify. This morning when it happened again I was a little fresher and put it into hibernation - Fn-F12 - and when I woke it it acted normally. I have just had a new mainboard installed on 1/15/2013 and a new processor installed on 1/22/2013 to cure other problems and have used it at least one full day after rebuilding without a problem before this started.
Geophyte1
W700ds 2757-CTO

Hi, Geophyte1
I did some research and found this document from Microsoft that might shed some light on your issue. According to Microsoft, this error is normally the result of graphics issues, but can also stem from RAM issues. There are two methods posted by Naman R, a moderator, that may be able to help you.
Best of luck. Let me know how it goes,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Network users not appearing on login screen

Hi all. I have just started setting up Lion Server for my household however have a slight issue with allowing network users to logon to devices. If I allow usernames and passwords to be typed in manually then network users can login, however if I want to have them show up as users on the login screen it doesn't work.
Is there a way for network users to be visible on the login screen at all times please? There are only two network users in my house.
Thanks,
Jordan

See my reply here https://discussions.apple.com/message/16280642 where I previously described how to do this.You will need Workgroup Manager installed for Lion if you have not already downloaded and installed this. You can get it here http://support.apple.com/kb/DL1419

Lion: user account not displayed on login screen

I´m using Lion and have 4 user accounts (my wife, me, one imported from my old mac, guest). After booting I get only 3 diplayed for login: Me, the old one and guest. I disabled the guest but it stills pop up for login.
I changed the view on the login screen to name and password and typed in the name and password of my wifes user account. I logged in, but in the user acount of the old mac...
Any ideas? Be very thankful for any help!

Log in with an admin account, delete the bad one, saving its data (stored in /Users/Deleted Users/ as a disk image, recreate the account, using the same username/password combo, log into the new one, mount the disk image, and transfer everything from it to the new account. Also, see the items in http://docs.info.apple.com/article.html?artnum=307005

Keyboard not working (On login screen!)

Hi there,
I have a customer with a brand new PC with 8.1
It was running fine for a few days - then they called me to say they could not login...
I logged in remotely and saw that the on-screen keyboard was on the screen at the login stage.
I was able to login remotely as I was not using the physical keyboard.
I Googled the issue and found a fair few similar issues.
I found that if the user, a) turned off the on-screen keyboard & b) clicked the Accessibility icon and then turned off the options in there (Sticky Keys, Toggle Keys and Filter Keys) the physical keyboard then started working...
So that seemed to fix it.
The other discussions I read seemed to suggest the fix for the issue is to go into Control panel >> Ease of Access & turning these things of permanently...
So I did that, but on reboot, they revert back and the user cannot login back in & is forced to follow my instructions on closing the on-screen keyboard, turning off the Accessibility options, so they can then login each time they turn their computer on
- most inconvenient!.
It is very frustrating and would very much appreciate if anyone has a solution...
Thanks, Dave

Hi,
Have you made changes on All Control Panel Items\Ease of Access Center\Change sign-in settings?
And have the customer made any changes recently which might cause this issue?
Yolanda Zhu
TechNet Community Support

[10.7.1] Not fix bug login screen!

Similar Messages

Maybe you are looking for