10.7.2: Xerox 8560N Printing Issue (xerox v2.0.9)

I upgraded to Lion 10.7.2 yesterday and I have been printing to my Xerox Phaser 8560N before and after the upgrade.
I went to Xerox and found that they had a new printer driver for OS/10.7 (xerox version 2.0.9) so I installed it. After that, printing in any application (Mail, Safari, InDesign, PhotoShop, Preview, &c.) would cause that program to freeze. Removing the Xerox printer completely and printing to my Epson would cause no issues.
My solution was to revert back to the Xerox Driver specifically mentioned for OS 10.6
Everything prints fine now and no freezing on print command.
I hope that this will help someone.

I had the same issue. Spent a LOT of time with Apple support (at least they try to help!!! Even when it is not their problem!!!). Calls to Xerox...wew! Hope your [insert forgeign language here]-to-English translating abilities are good. Also plan to wait on hold. In the end they say uninstall and reinstall the drivers. Ummm...did that many times bud! Then they say contact Apple because Apple is having problems with printing on 10.7 with many brands of printers. I said...tried that bud...its not their issue, its yours (Xerox's). I gave him option #3...throw the printer off the balcony. He could not endorse that option!
OK, so like the above said...
1)     Unistall printers (go to system preferences and use the minus sign)
2)      go to the Xerox driver website. Download the 10.6 driver from 2009. I know the newer one from 8/11 says for OSX 10.5-10.8. Trust me.
3)     If your printer is on a network and you are having trouble finding it and Xerox's wonderful (cough cough) Walk-Up Technology fails you...PLUG TH PRINTER IN DIRECT (ethernet to ethernet in my case)
4)     Try to reinstall
5)     Unplug Printer and plug back into router.
6)     Double click on the 10.6 driver you downloaded again and this time it will find/discover the printer.
7)     PRINTS FAST JUST LIKE BEFORE!!!!!!!!!!
Patrick M. Truhlar
Patrick Truhlar

Similar Messages

Xerox, Win 7, Adobe printing issues

HELP...2 New computers are Windows 7 with CS4 premium on one and CS4 Standard on the other
PROBLEM: None of our Adobe files will print correctly to our 2 Xerox printers (7750 and 6350). Even though page layout is correct the documents are printing extremely reduced. We have downloaded and installed the Windows 7 Drivers from Xerox -- but this did not correct the problem. Also it is only the Adobe products (All) that don't print correctly. Big problem for a small design firm.

PLEASE!!!! Is there anyone I can talk to about our problem with CS4, Windows 7 & and Xerox print issues. The Adobe software is the only one that seems to have a problem printing and since replacing our Xerox printers (7750, 6350) is not currently an option, I need a resolution.
We are a small design firm and I have 4 licenses for CS4. We generally upgrade every other version -- which means we would be investing in CS6 when it is released. I know we are small potatoes in the Adobe world, but this is business and I can't imagine (just looking at all of the threads online), that someone is not working to find a fix for this.
We have downloaded and installed the latest Win7 drivers for both printers. This did not resolve the issue.
HELP -- This is very frustrating. Right now we are saving everything as JPEG files to print -- not a good solution for a graphic design firm.
Kim Boston
BCi Creative
509-465-9775

Can anyone help me troubleshoot duplex printing issue to Xerox 8560?

Can anyone help me troubleshoot duplex printing issue to Xerox 8560 phaser?

Solution may be found if you search in the "More Like This" section over in the right column and by contacting Xerox tech support.

Mac O/S X with CS3 printing issues to a Xerox

I have multiple systems running 10.4.x and 10.5.x using CS3. We can get Acrobat to print when we select "Print as Image", all other applications in the suite will NOT print until we convert them to a PDF. Things were fine when we were using CS2, but once we upgraded all our systems to CS3 we've had nothing but printing issues. What can we expect when CS4 is pushed out?!? Does any one have any recommendations how to FIX this printing problem, we've reloaded our print drivers multiple times, but NO luck?
Thanks for any ideas or resolutions.
Bob

Reset the printing subsystem and then make sure you install the latest
printer drivers.
Mike

Printing Issue - Custom Media Sizes, InDesign CC/Mac Mavericks

Hi all,
I've got a strange problem that I hope someone can provide some insight to. Perhaps this is a bug, but I'd rather ensure that there isn't something here that I haven't understood.
I have a project that I periodically modify and re-print on custom size media (3.25" x 7.36"). I've used the same Id document and workflows since, probably, Id 2 or 3, updating each time to the latest versions. The problem may be in the way Id CC interacts with the MacOS X printing system. The printer in question is a Xerox 8550.
The project is a one page table printed on this particular card stock. What's happening is that the printable area on the stock isn't being fully used - the top and bottom of the media aren't being printed - thus the top and bottom of the content is being cut off, in a way that wasn't an issue previously.
The printer control panel prompts for and accepts the media size correctly (I believe these printers have checks to ensure media fed matches the printable area; the Phaser engine doesn't like printing "off the paper").
Again, the same document has been used for many years, so I've tried the following steps to isolate and remediate the problem:
Document Setup: Custom Page Size, verify correct for media.
Print dialog: "Page Setup..." format for (custom media size defined for OS X), also verified to be correct for media.
Print dialog: "Setup", paper size Width and Height, correct; orientation correct, offset and gap 0p0, scale 100%.
Print dialog: PPD correct.
Recreated document, re-entering sizes and verifying setup. No change.
Created a test document, with same settings, and a scale extending outside of the printable area. The specs for (and my experience with) the printer are that the printable area is 5mm from the edge of the paper. The result of the test is that the content is cut off at 10-11mm from the edge instead.
Exported PDF from Id. Printed using Preview, same OS X page setup configuration. Printer prompts for correct media size. Content in test file prints as expected, to 5mm from media edge.
Printed test document from Acrobat XI, using "Actual Size", "Choose paper source by PDF page size", and "Use custom paper size when needed". Printer prompts for correct media size, content prints as expected, again, to 5mm from media edge.
So, in brief, exported PDF prints properly (and this is a workaround), but it's a pain that Id has this issue. All software involved is up to date. I haven't tried to dig into the PPD, as PostScript isn't one of my areas of strength, but I'm reasonably sure it's correct. I've also tried a similar test using Letter-size paper, and that also prints to 5mm.
I'd love to get some feedback on this. Many thanks.

For what its worth, I've been trouble shooting this issue with Adobe / Xerox / Apple for some time now. Here are my findings so far:
--------------------------------------------------Adobe's final response after a very long help ticket--------------------------------------------------------
This Email is in regards to the case related to the adobe application and Printing issue ,
As checked we were able to see that application is able to create the document with correct size , when checked within Adobe Pdf properties the size was showing as per document specification and when we tried to print the same , the document was showing the same values carried forwarder to the printer and in the preview it was showing the same specific setting of the document size in the printer previewer
It was during the printing process the same value are not being calculated correctly as per our interaction , you were able to use the same in the previous version of Mac 10.8. 5 , please check if there is any update available for the 10.9 version of mac and if it would work on the same ,we would request you to contact your printer help support for the same we are leaving the case open and would request you to call us back if there is any further issue on 800 833 66 87
Thanks and Regards
Jatinder
Adobe Technical Support
--------------------------------------------------Xerox's response, after an escalated level 2 ticket--------------------------------------------------------
Here the Decline from 3rd Level Engineering.
2nd Level Reference #: 19458297
Customer Name: VDB REAL ESTATE
Product Model: Phaser 7800
Problem Summary: Scale is incorrect when printing PDFs on custom size paper in OS X 10.9
Decline Reason: App/3rd party Issue
Note: I tested using the included process steps:
STEPS TO REPRODUCE-
I tested using a PDF that was 6" x 8.5".
In Acrobat or Adobe Reader, choose File > Print, go to Page Setup and create a custom page size of 8" x 9.5".
In the Acrobat dialog, set the size to "Actual size".
Print this to the device, note that the image is about 7" x 10".
Interestingly, in the Acrobat dialog, if "Choose paper source by PDF page size" is selected, the previewed page size is not that of the document, but instead shows 10.13" x 7.17". This size will change if different printers are selected.
Scaling is not an issue when printing to standard page sizes.
I was able to recreate the issue on a Mac running OS 10.9.1 using the Xerox 7800 print driver. I then tested on Mac OS 10.9.1 using a generic Postscript driver and also recreated the issue. This indicated that this is not a Xerox driver issue. I then tested on a Mac OS 10.8.5 using the same Xerox 7800 driver version and it worked as expected without scaling the image.
Mac OS 10.8.5 uses CUPS version 1.6.2 for printing where 10.9.1 uses CUPS version 1.7. I believe this is a CUPS issue and you will need to work with Apple to resolve it.
You may appeal this decision by replying to this email and providing appeal details.
Regards,
Faye Hanley
Technical SPAR Administrator
Technical Escalation Support Office
Xerox Corporation
400 Main Street, Suite 2040
Saint John, NB, E2K 4N5
Phone: 1-888-380-9422 Opt 4
--------------------------------------------------Apple's response, after an escalated ticket--------------------------------------------------------
While using 10.92 with Xerox Phaser 7800DN (2.94.1 PPD - Installed via Software Update), PDF at a custom page size was sent to spool folder via Preview was correctly sized, however the document produced by Adobe Reader appears to be icorrect. When using Preview the PDF printed to a custom page size at 100% scale comes out the proper size.
Carol West
Apple
P.S. If you wish to reach me regarding this case, please contact me at 1-877-388-0879 Ext. 85789
**this is a paraphase of what the engineer (Clay) sent back to Carol West who was assisting in my help ticket. She was not allowed to send me the engineer's findings in email, she was only allowed to read it to me over the phone as I typed it out.
Basically go back to Adobe and ask for help there. I guess at least the circle is closed as I am back to where I started.

Adobe printing issues

We have a situation in which we need our adobe program to default to a different printer than the windows default printer.
Example:
We have a dot matrix printer set as windows default printer. We have to keep this as the default printer because we use a program called ADP and it has to have this printer as a default to work.
We also have a color laser printer that we print with one of our websites that uses adobe. The website automatically prints to which ever printer is selected in adobe. We do not get an option to change it. So it always prints to the dot matrix printer.
We have found a trick in which we can open adobe, print to the color laser printer, and go to the website and print and it will go to the color printer, but we have to do this all the time.
Is there a registry entry or something in which we can change the default printer in adobe? I have read about something with adobe remembering the last printer used but I think it is in version 8 or higher.
Unfortunately, we current have to use version 7 due to some incompatibility with a website we work with.
Any help would be greatly appreciated.

PLEASE!!!! Is there anyone I can talk to about our problem with CS4, Windows 7 & and Xerox print issues. The Adobe software is the only one that seems to have a problem printing and since replacing our Xerox printers (7750, 6350) is not currently an option, I need a resolution.
We are a small design firm and I have 4 licenses for CS4. We generally upgrade every other version -- which means we would be investing in CS6 when it is released. I know we are small potatoes in the Adobe world, but this is business and I can't imagine (just looking at all of the threads online), that someone is not working to find a fix for this.
We have downloaded and installed the latest Win7 drivers for both printers. This did not resolve the issue.
HELP -- This is very frustrating. Right now we are saving everything as JPEG files to print -- not a good solution for a graphic design firm.
Kim Boston
BCi Creative
509-465-9775

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP ENVY 100 D410 Printing issues...

I have an HP ENVY 100 that has recently started having printing issues. We recently upgraded to Mountain Lion and had no problems in the upgrade nor have we had any other software that we've changed. The problem seems to be somewhat random and the results are always the same. When commanded to print the printer acts as if it is running out of ink and then distorts the fonts creating vertical lines on the page and skipping rows creating what almost looks like a bar code. It's most peculiar and the only way I can find to solve the issue is to completely restart both my system and the printer. Thinking that I had a driver issue on my Mac I used the utility on the printer to update drivers and none were found. To insure that the problems wasn't isolated to just my machine I tried our laptop as well and it seems to have the same problem. Has anyone had a similar problem?

Hi Talon,
That more liekly related to the software indeed, I would suggest trying the following steps:
Reset the printing system as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
Open the Applications folder, then Hewlett-Packard and then open the Device Utilities folder, launch the HP Setup Asisistant and follow the steps to reconfigure the device.
If there is no Hewlett-Packard folder simply re-add the printer by clicking the plus button under Print & Scan.
Now try printing and follow for any difference.
If the same persists uninstall any HP Software by following the HP Uninstaller under the Hewlett-Packard folder.
If there is no Hewlett-Packard folder follow the steps listed under Mac OS X 10.6, 10.7, and 10.8 > I used Apple Software Updates to install the product software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02440673&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5157536#N1305
Download and isntall the latest Lion Software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-97934-2 &cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Once completing the installation click the Apple icon and install any available Software Update.
Shlomi

New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

Printing issue

I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged. The screen indicates "Print cartridge problem (Black) Refer to device documntatnion to troubleshoot" I took out the cartridge, shook it, put it back in - no luck - help! Thanks

Hi @LYNNHAAG , and welcome to the HP Forums!
I see you're experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Need help diagnosing cause of printing issue w/ image distortion

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Remote Desktop Connection and printing issues

Hi,
I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
in Windows Server with my local printer in my room connected to desktop, it won't work.
Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain.
I also noticed there is about 30 seconds wait to process any document to print.
Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing.
I also wonder why printer spooler needs to be restarted when printer is not working.
Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
Thanks
Regards,
Clement

Hi,
Please check if you turn on this settings:
You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
1. Open Remote Desktop Connection by clicking the Start button, clicking
All Programs, clicking Accessories, and then clicking
Remote Desktop Connection.
2.Click Options, and then click the Local Resources
tab.
3.Under Local devices and resources, select the Printers check box.
4.Click Connect to start the session.
Make sure that you select your printer in the Print dialog box each time you print.
Karen Hu
TechNet Community Support

Firmware upgrade?? Printing Issues?? HP Designjet Z6100ps

I have a Designjet purchase as a demo in 1/2008. The last firmware upgrade that is currently installed is GG-GG_9.0.0.4. I am having printing issues where it prints about 4" of my prints from Apogee Printdrive (which comes from a windows computer) and then wants a restart with the firmware error code. Prints from the MAC are fine and will go straight thru. I have tried multiple firmware upgrades (the latest is GG-GG_11_00_00-2_mvl40-x86-opt_B.dmg) and it is all invalid. After a week of trial and error and trying different upgrades from different computers I am at my whits end. We print to the this printer presslayouts to look at before plating for press. Printing Banners from the MAC is no problem. Anyone have any suggestions. And of course, warranty and service is nill.

I am linking you to the the Designjet forums below. Please just repost your question their it will have better chance of getting answered.
Designjet forum

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

10.7.2: Xerox 8560N Printing Issue (xerox v2.0.9)

Similar Messages

Maybe you are looking for