10.7.5 supplemental update doesn't change build number to 11G63b

I have a bunch of Macs still with Lion and Apple Remote Desktop reports that one of them has Mac OS X 10.7.5 build number 11G63 while all the others have build number 11G63b. I'd like to align them so I installed the OS X Lion 10.7.5 Supplemental Update on the Mac with build 11G63 to update it to 11G63b. The update installed correctly but after restarting the Mac it still reports 10.7.5 build 11G63.
Am I missing something?
I read that the supplemental update "is not needed if you install the Mac OS X Lion v10.7.5 Update (build 11G63)" but AFAIK it should nevertheless update the build number, shouldn't it?

Where are you clicking on it? In your Purchases list or are you clicking on the button below the application:
The text in the button will differ depending on whether you've already purchase it or not.

Similar Messages

Build Number of Exchange 2007 Server Not Change when Installed Rollup 14 updated

I have a project to Upgrade Exchange Server from 2007 SP2 to 2013 with Lastest update. I found in Upgrade Instruction required Update Exchange Server to atleast 2007 SP3 RU10 version
Installation of Service Pack 3 was successful. and I continue to install RU14 patch... Installation look Complete but build number of Exchange Server wasn't changed. and I already to Update Windows Patches to lastest update and restart but build number is
same
I try to reinstall RU14 patch by Powershell with administrator credential ,configure Execution Policy to Unrestricted and following are MSI verbose mode log
Rollup.log
Thanks

I have a project to Upgrade Exchange Server from 2007 SP2 to 2013 with Lastest update. I found in Upgrade Instruction required Update Exchange Server to atleast 2007 SP3 RU10 version
Installation of Service Pack 3 was successful. and I continue to install RU14 patch... Installation look Complete but build number of Exchange Server wasn't changed. and I already to Update Windows Patches to lastest update and restart but build number is
same
I try to reinstall RU14 patch by Powershell with administrator credential ,configure Execution Policy to Unrestricted and following are MSI verbose mode log
Rollup.log
Thanks
http://blogs.technet.com/b/exchange/archive/2010/03/08/3409469.aspx
Dude, where's my rollup?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

HP LJ P3005 changing formatter number

It's my first post here so HELLO
I've got problem with repair formatters for HP LJ P3005. I've got large number of these with dead eeprom's. Change eeprom IC are not problematic, more problematic is to get right dump for them. I have got batch from different unit (same formatter), I can change MAC addres (using hex editor on batch I have) - it works good. But I cannot change formatter ID to the as on formatter label are. When i try to do so, in report print (config) there is number (decimaly) in place where formatter number should be (number is always the same). I was trying to directly program eeprom outside formatter board (in programmer). I try also use PJL to do so, i can comunicate with printer using LAN (formatter doesn't have LPT port), printers accepts commands but it doesn't change formatter number.
How can i change formatter number?

@adam_lewandowsk
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

What is "installing 1 item" I clicked by mistake and my screen is showing me this. How long does it take to do the update? I'm worried that it doesn't change. What can I do about it?

What is "installing 1 item" I clicked by mistake and my screen is showing me this. How long does it take to do the update? I'm worried that it doesn't change. What can I do about it?

Cocoi,
since we don’t know what this one item being installed even is, how could we know how long it would take to install?

I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices?

I have Lion on my laptop and I want to back up my calendar TO my iphone. Not the reverse. iCloud only goes from iphone to iCloud to mac not the other way. Also, why doesn't "sync" mean update most recent changes across all devices? I thought that was the point of iCloud. Any suggestions since iCloud doesn't seem to work?

It's a work computer so I wanted to save them to my iTunes so I can access from another computer. Should I go to a home computer and just Import for best results? If so how do I do this? Also, why would I be synched with another library and how do I find out what this is? Very new/green user here

PSD preview doesn't update when i change psd-file

Hello everyone!)
I work in Mac OS Mountain Lion. PSD preview doesn't update when i change psd-file placed on external hdd or flash drive (ntfs or exfat).
Create psd-file.
Сhanged psd-file in Photoshop cs6 (preview don't update).

Same problem with PDF files.
Now it's very difficult to detect latest version of psd-file.
Does anyone have a similar problem using not HFS file system?

HT5815 Got the OS X 10.8.5 supplemental update but my camera still doesn't work :(

Hi,
Before I even got the OS X Mountain Lion 10.8.5 update, my video for skype was not working. Facetime was not working as well, but photobooth did. After the update however, I get the message "There is no connected camera" for every application. I even got the supplemental update which was supposed to fix the camera problem but it still persists. Help, please!
Also, I'm not tech-savvy at all, so if you do have a solution, please try to explain in layman's terms, if possible
Thanks so much

There is a known issue with mid-2013 MacBook Air, OS X Mountain Lion (10.8.5). If your Mac is NOT a mid-2013 model, this issue does not apply.
According to Apple's technical support article entitled "MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update", Apple is investigating this issue.
In the meantime, a 10.8.5 workaround is at http://discussions.apple.com/thread/5306216?tstart=0
Before you applied the 10.8.5 update, (or if your MBA is NOT a mid-2013 model) you could have used the built-in iSight suggestions from http://support.apple.com/kb/HT2090 to troubleshoot your FaceTime HD camera problem(s). After getting the camera working in OS X 10.8.4, if you use a mid-2013 MBA, applying the 10.8.5 update and the workaround should have given proper camera functions.
However, at this point, try resetting the PMU/SMC using the directions for
"Resetting the SMC on portables with a battery you should not remove on your own"
from the HT2090 page reset instructions for MacBook and MacBook Pro before applying the workaround.
If your MBA is NOT a mid 2013 model, consider the other HT2090 suggestions, too.
If your camera still doesn't work, or if the above suggestions seem more complicated than you want to attempt, contact Apple, your Apple retailer, or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.8.5

My email says it's checking mail but doesnt find any and doesn't change update time

My email says it's checking mail but doesnt find any and doesn't change update time. Only started today. Have checked settings and tried turning off to no help. Can anyone help?

which email account is it? is it happening with all accounts or just one? Have you tried closing the mail app out of multitasking?

IMac-27inch model (late 2012) running slow after Mountain Lion 10.8.5 supplemental update

I have the iMac 27-inch (late 2012 model), 8GB RAM, 1TB Hard Drive. All of a sudden after the Mountain Lion 10.8.5 Supplemental update it started running like molasses (apps take forever to open, takes forever to wake out of sleep, long boot up times, etc.) I ran verify disk, verify disk permissions, etc. I found that when I ran verify disk permissions, it stated that the iTunes permissions weren't right so I repaired disk permissions, reboot, still same problem. Ran verify disk permissions again, once again iTunes permissions issues, repair disk permissions, restart, same problem over and over again like Ground Hog Day, please help...

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Facetime Camera not working - Installed 10.8.5 Supplemental Update

So I cheerfully installed the supplemental update for Mountain Lion 10.8.5 tonight and it did not fix my camera issue with Skype. In fact, my Facetime camera, which was working fine with Facetime & Photobooth, stopped working with any software after this update. Before this update came, I did change the plug in back to the pre-10.8.5 update camera plug in, which made it work fine again. I thought installing this update would fix it but it didn't. I ended up changing the plug back to the pre-10.8.5 plug in again and now everything works fine. Any suggestions as to why this is the case?
And I'm using a mid-2013 Macbook Air. 4g Ram/256bg Hard Drive

Unfortunately this is not working for my MacBookAir6,2.
10.8.5 broke the camera for everything but FaceTime.
I installed 10.8.5 supplemental; that broke the camera completely.
Installed 10.8.5 combo, and FaceTime works again, but Skype and Gmail are still broken.
I tried copying the AppleCamera.plugin as noted on the Skype site, but that doesn't fix Skype or Gmail.
Ideas?

HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP

10.6.8 Supplemental update -- Freeze

I let software update install this supplemental update today, after ensuring that my time machine backup had completed. After the restart, it seemed to launch ok until the desktop appeared with larger/rearranged icons, and a huge dock appeared (usually hidden and containing many more items). Activity Monitor launched (login item) and began updating.... then stopped.
At that point, I could move the pointer with the mouse, but it was otherwise unresponsive. I've seen similar behavior with 2 bad video boards in past, but there weren't any screen glitches. It would boot in safe mode, but all my usual finder/keyboard/mouse preferences were reset to those of a new install. Any attempt to reboot led to a similar hang shortly after launch. (< 30 sec).
I undid the changes, reverting to a complete restore from this AM's time machine backup. While it is back to functioning as it was before the update, I appear to have lost anything in my user folder that was changed since the last restart some time ago. This is a feature of file vault, I presume.
Does anyone else long for the days when Apple Computer sold computers, rather than lifestyle?

Same problem here, but i don't have time machine running so cannot back out the update. Hope Apple fixes this soon.

Software Update doesn't have any new software for your computer at this time

HI
I manged to get all my updates downlaoded and on my server, i have currently enabled 133 of 400 updates.
I have changed my snow leopard machine to point to the internal update server
But then after a while of checking this displays software Update doesn't have any new software for your computer at this time
Which is a Lie, because i know there are updates on the server that the computer needs to have.
Any Ideas
Many Thanks

Oh i forgot to say in consol (from the client) i get can't instantiate distribution from server address error Domain=NSXMLParserErrorDomain code=70 etc
Any ideas anyone?

Changing the material Group in PO -- the GL assignment doesn't change

Good morning,
we have a material group linked to a valuation class.
When we create a service purchase order, we use this material group and the G/L account is automatically updated, but if we change the material group, the G/L account doesn' change.
SAP PARAMETERS
- Material Group 1 is linked to valuation class XXXX
- Material Group 2 is linked to valuation class YYYY
- In SPRO the field G/L account is set on Display (screen layout).
Our user can change the material gruop, but the G/L account doesn't change too and this mistake could generate a wrong accounting document.
We want that the G/L account change automatically when the material group is changed and, if we cannot, we'd like to block the change of the material group (but not in Screen layout, because we are buying service without material master and we need to inser the material gorup).
Thanks for any ideas.
regards

Hi klausj,
Did you find a solution to this?
We have the same issue.
/Thomas

System time in taskbar doesn't change after corrections

Following by these articles: Time, Linux tips i tried to set time in my Arch GNU/Linux. Each time after all actions i get proper time from timedatectl, but time in taskbar doesn't change. After reboot i get wrong time from timedatectl again.
What should i do?
p.s. I use Arch with Virtualbox if it is important.

ayekat wrote:Could you please specify what actions exactly you are taking? The commands you run, for example.
Sure.
1)After turning on my VM, i type timedatectl and
get:
$ timedatectl
Local time: Wed 2015-05-06 13:35:27 MSK
Universal time: Wed 2015-05-06 10:35:27 UTC
RTC time: Wed 2015-05-06 10:35:26
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: no
DST active: n/a
Current local time is 09:22. Current UTC from here is 06:26.
2)$ sudo timedatectl set-time "2015-05-06 09:28:15"
timedatectl
Local time: Wed 2015-05-06 13:46:46 MSK
Universal time: Wed 2015-05-06 10:46:46 UTC
RTC time: Wed 2015-05-06 06:28:18
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: no
DST active: n/a
3)$ sudo timedatectl set-local-rtc 1
4)$ timedatectl
Local time: Wed 2015-05-06 13:52:54 MSK
Universal time: Wed 2015-05-06 10:52:54 UTC
RTC time: Wed 2015-05-06 13:52:54
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.
5)$ sudo timedatectl set-time "2015-05-06 09:36:15"
6)$ timedatectl
Local time: Wed 2015-05-06 09:36:17 MSK
Universal time: Wed 2015-05-06 06:36:17 UTC
RTC time: Wed 2015-05-06 09:36:17
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.A
Time at taskbar:
ayekat wrote:And after rebooting, how exactly is the time wrong? Is it just the wrong timezone, or is the clock completely off?
So, what i get after reboot:
$ timedatectl
Local time: Wed 2015-05-06 14:08:41 MSK
Universal time: Wed 2015-05-06 11:08:41 UTC
RTC time: Wed 2015-05-06 11:08:39
Time zone: Europe/Moscow (MSK, +0300)
NTP enabled: no
NTP synchronized: no
RTC in local TZ: yes
DST active: n/a
Warning: The system is configured to read the RTC time in the local time zone. This
mode can not be fully supported. It will create various problems with time
zone changes and daylight saving time adjustments. The RTC time is never updated,
it relies on external facilities to maintain it. If at all possible, use
RTC in UTC by calling 'timedatectl set-local-rtc 0'.
Timezone is always right.

10.7.5 supplemental update doesn't change build number to 11G63b

Similar Messages

Maybe you are looking for