10.7 Lion: Hand Tool - jumpy movements when accessed via spacebar?

I just upgraded to 10.7, and notice that the Hand Tool is very erratic and jumpy when accessed via the Spacebar. It's not so hot when directly using the Hand Tool, but it's about the same as it was under 10.6.
Is anyone else seeing this? It happens when using either the mouse or the Wacom stylus. Trying to determine if it's just me or not, could be some other app causing problems.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated  permit_mynetworks  check_helo_access hash:/etc/postfix/helo_access  reject_non_fqdn_hostname  reject_invalid_hostname  permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions.  You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up.  Private/policy I think relates to grey listing.  Maybe gives you a hint.

Similar Messages

  • Suddenly my space bar is no longer giving me the hand tool to move around on my artwork window.  How do I reset this?

    Suddenly my space bar is no longer giving me the hand tool to move around on my artwork window.  How do I reset this?

    Thanks for getting back. I know my answers seem too obvious at times, but never leave out the simple ones just in case.
    So lets look at two things: Keyboard Shortcuts and System Preferences.
    Edit > Keyboard Shortcuts opens a dialog box. Press your Option key, and the Cancel button turns into a Reset button to get shortcuts back to defaults. Clicking on Reset may fix it.
    The second is Preference resets. Hold down cmd-opt-shift and start Photoshop. It will ask if you wish to delete the settings file. Answering "Yes" many times clears up the problem.
    Gene

  • BSP css & mime objects not found when accessed via iView in the Portal

    Hi
    A locally developed BSP Application has defined it's own CSS and MIME objects.
    This works well when accessed via the Integrated ITS in ECC6.
    However, when we access this the BSP application from an iView in a Portal (NW04S), the css and MIME objects do not appear to be loaded.
    What are we missing?
    Thanks
    Doug

    Hi Doug,
      have you found out the reason for this issue, i encountered the same problem when i access the HCM_LEARNING bsp, would you  please give some addvice if you have any idea?
    thanks,
    billy

  • No hand tool (grabber) appears when cropping in LR 5.

    I am using LR 5.6 on a Macbook Pro (OS X 10.9.4.) When attempting to crop, the hand tool often does not appear when I place the cursor inside the Crop Overlay Border. All I get is the pointer, which makes it impossible to reposition the photo inside the border. This happens intermittently (more often than not) and is only resolved when I restart Lightroom. I notice that this problem has arisen in other Adobe applications without  satisfactory or consistent resolution of the issue. My space key is not stuck and the only browser open is Safari. Help!

    On my computer the grabber it appears after I have cropped the image so that part of the image has been eliminated. Does that not happen for you?

  • I need hand tool to move around the page in small PC screen like in adobe pdf reader

    ''locking as a duplicate - continue here - https://support.mozilla.com/en-US/questions/814830''
    In Adobe® Reader® is the tool for opening and using Adobe PDFs that are created in Adobe Acrobat®. I have very useful tool to move on the page on the screen it's called "Hand tool" .
    The tool can allow you to move around the big page by the mouse.
    the tool god for zoom in and walk around the page in small screen.
    I look also on adds on and I did not find one .
    thanks
    Daniel

    I think the [https://addons.mozilla.org/af/firefox/addon/grab-and-drag/ Grab and Drag] extension is much closer to what's being requested.

  • Why does the hand tool come up when I click the mouse?

    I am a very knowledgable individual of InDesign but this is a stumper. I cannot use any single tool that I have. When I press the buttons on the side, for instance the text tool, the image that should appear for the cursor does, but once I click the mouse, the hand tool comes up and drags my page around. This is even when the hand tool is not even selected. I am not pressing any buttons on the keyboard or anything, this is quite frusterating. I am trying to do this job and can't even edit previous files or make a new one. Should I reinstall, or what? Please help!! Thank you.

    What Al said (Hi, Al -- long time no see!).
    Here's a link for CS4: Adobe InDesign CS4 * Setting preferences
    Be sure to read everything, including comments.
    Similar link for CS3: Replacing InDesign Preferences

  • I can't get the hand tool to move around the page by using the spacebar?

    This has been working for me for ages but it has just stopped working an hour ago... Have I accidentally turned off a setting somewhere?
    Newsgroup_User

    If the type tool is active with a blinking cursor, press Alt/Option to activate the hand tool.
    With no blinking cursor, press Alt/Option + Spacebar.
    If this is not the issue, try replacing your preferences.

  • Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

    I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
    Thanks.
    Solved!
    Go to Solution.

    This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants.  Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected.  When no connection is detected you could have the program run in an idle state.  The attached screenshot shows a general way to do this.  Have a good evening!
    -Bob
    -Bob
    Attachments:
    idle state.JPG ‏45 KB

  • Server Admin not connecting to Leopard Server when accessing via VPN

    Hi everyone,
    Recently, as the title suggests, Server Admin (or Server Preferences, for that matter) would not connect to my remote server via VPN. I'm quite sure that the server is working nicely, as the users (both of them lovely young ladies with considerable charms, which makes on-site support quite interesting, if distracting) didn't call me to complain, and I can login via SSH with no problems.
    The server is a Mac Mini, connected to an Airport Extreme (gigabit N), which in turn connects to our ADSL modem, if that helps any.
    Now, I did tinker around a bit with the settings before this happened, so I think it's probably my fault (well, I started my "career" of administering this server a week ago, what do you expect), so I suppose I may have inadvertently limited access to a service required for Server Admin and Server Preferences to function.
    If anyone could tell me which services are absolutely necessary for Server Admin to function, or at least where to start looking, I'd be immensely grateful. I didn't yet go on site to try and wrestle the whole thing from there, as the travel costs are non-trivial, so I'd rather do it remotely, if at all possible.

    This is exactly the difficulty I am having with a 10.5.4 Intel xserve. I have established a VPN connection that connects me to my business LAN, and I know it has carried out the connection because there are a number of things I can access properly that are not available on the public internet. For instance, my LOM ports are restricted to my business LAN, and when I connect to the server via VPN I can access teh LOM ports and using server monitor. However, when I try to use Server Admin, nothing works. It won't connect. I too am confused. All traffic to the xserve is allowed via the business LAN. I thought all traffic was supposed to be routed to the VPN server when connected via a VPN. If this is the case, shouldn't Server Admin work? When I go on site and connect my computer directly to the business LAN, I have no difficulty using Server Admin.

  • AVCHD import of moving clips very jumpy, not when done via FCE or Voltaic

    Hi all,
    I have a problem when importing clips from my AVCHD cam (a Sony HDR-SR7E) into iMovie 08. When the clips I am importing are of moving objects, or sweeping over a scenery, the imported clip are sometimes extremely jumpy. Like if ist was taken with a frame rate of 1 or 2 fps. It doesn't matter if I choose Large or Full quality, the result is always the same using the specific clips, and impossible to use in an edited movie. And it is not a playback problem, my CPU meters are only up to about 1/4.
    If, however, I import the clips into .mov format using another program, like Final Cut Express 4 or Voltaic, then importing it into iMovie 08 using File -> Import Movies the quality is excellent! Nice result/fps with both Large and Full quality/conversion settings. Strange isn't it.. ? So it seems like the import process (and not the converting into 540 resolution if that is done) is doing something wrong in iMovie 08?
    I do have some third party codecs installed, like xvid and possibly divx, but not Perian (that I have read has been causing some problems before).
    Has anyone else noticed this problem? What is Voltaic and FCE doing in the import process that iMovie 08 is unable to?
    Thanks,
    Henrik

    Hi all,
    I have a problem when importing clips from my AVCHD cam (a Sony HDR-SR7E) into iMovie 08. When the clips I am importing are of moving objects, or sweeping over a scenery, the imported clip are sometimes extremely jumpy. Like if ist was taken with a frame rate of 1 or 2 fps. It doesn't matter if I choose Large or Full quality, the result is always the same using the specific clips, and impossible to use in an edited movie. And it is not a playback problem, my CPU meters are only up to about 1/4.
    If, however, I import the clips into .mov format using another program, like Final Cut Express 4 or Voltaic, then importing it into iMovie 08 using File -> Import Movies the quality is excellent! Nice result/fps with both Large and Full quality/conversion settings. Strange isn't it.. ? So it seems like the import process (and not the converting into 540 resolution if that is done) is doing something wrong in iMovie 08?
    I do have some third party codecs installed, like xvid and possibly divx, but not Perian (that I have read has been causing some problems before).
    Has anyone else noticed this problem? What is Voltaic and FCE doing in the import process that iMovie 08 is unable to?
    Thanks,
    Henrik

  • App malfunctions when accessed via URL but not when accessed in workspace

    I have an application that I have built at work. I have it on a test box. I have been using the app for several months with no problem. Because it is on the test box I am able to use the url to log into the app e.g. http://infotest.finone.bankone.net:7777/pls/htmldb/f?p=229
    Today I started having problems with the app not functioning properly for no apparent reason. A file browse upload process stopped uploading the files even though I got no error messages. Editable items stopped passing values to the next page when I click to edit something.
    The weird thing is when I log into my workspace on the test box and then launch the app from there everything works perfectly as before! I went in an deleted and purged all the sessions and then logged into the app via the url again and it worked for a minute then I had problems creep back up.
    This app is supposed to move to the production server soon. Any ideas why this weirdness is happening??!!

    Hi,
    As far as the file upload process...nothing happens and nothing appears in the Web Server Error Log at least not from what I see perhaps I am not looking in the right place. It's like as if the process just didn't actually activate or something although the page does in fact submit because the field values are cleared and the success message I coded in appears. So I know the page is submitted.
    The values being passed were actually part of the Wizard Form/Report on a Table. You click the Edit icon and it passes the value of the PK field to the subsequent field on the next page within the same session ID and fetches the appropriate row from the underlying table.
    So far not a single other person has had this happen to them. Today the app worked perfectly without any of these issues. Can there be local settings on my PC that are conflicting with the session state and other things on the Application? I log in and out of the app close to a 100 times a day, could this be clogging up session id's or something?
    Unfortunately its not consistently reproducible from the standpoint that today its not doing it all but when it was happening yesterday it certainly was consistent so at this point I don't know what to think.

  • Videos on a web page will no longer play when accessed via a 'home screen' bookmark

    iPad 2, iPad Mini iOS 8
    I have saved certain web pages as bookmarks 'to the home screen' but since the iOS update when I open these pages and try to play an embedded video that is hosted on the website itself (as opposed to a YouTube type one) the video will no longer load or play, its as though the play button pop up is missing, they will play from a standard bookmark and they will play from the page when I load it up in Safari before I save the bookmark but as soon as I create a shortcut and 'add to home screen' they stop playing.
    I've tried this on iPad 2, iPad Mini & iPad Air all running iOS 8, they were all fine before the iOS update so that's certainly caused the issue but has anyone else experienced this or know how to resolve it?! 

    it's possible.  but you have quite a lot to learn or you should hire someone.  it's unlikely you'll find someone to do all that gratis.
    if you want to learn, check the video class.  it will let you play the flv file without a skin.
    you can also use the flvplayback component with no skin.  that will add to your swf's file size with no benefit except it's easier to use than the video class.
    the floating and disappearing can all be done with divs.

  • Host name (localhost) when accessing via web

    I installed Beehive and it is running great.
    But I may have missed something - when I access the clients using http://<my web dns name>:4443/zimbra I keep getting re-directed to http://localhost.localdoamin:4443/zimbra.
    When I downloaded the conferencing add-on it also tries to connect to localhost.localdomain and not to the host name of the server or the DNS name (not the same as the actual hostname).
    The Outlook extension works fine and Beekeeper accepts and stays on the web-host name.
    Can I get Beehive to begin using the web-host name in place of localhost.localdomain ?

    I guess your machine name is incorrecly configured in /etc/hosts or your localhost line does also contain the machine name, which is often the case in linux distros "bare from install".
    http://download.oracle.com/docs/cd/E14897_01/bh.100/e14830/what_you_need_to_know.htm#BHLIN754
    I believe that it should be corrected with
    beectl list_properties --component VIRTUALSERVERthen
    beectl modify_property --component VIRTUALSERVER name ServerName value myserver.mydomain.comfinally
    beectl activate_configuration
    beectl modify_local_configuration_filesnot 100% sure

  • Privilege level when accessing via telnet

    I've just set up telnet access using RADIUS authentication. I'm using Microsoft IAS for the radius server.
    I can access the router but when I try to get into the enable prompt, it says "% Error in authentication."
    I should mention that when I connect directly via console port, I can login using the radius. It doesn't drop me into an enable prompt but it allows me to enter into it by typing "enable". doesn't work for telnet however.
    any ideas what I did wrong?

    The command reference for "aaa authentication enable default" says that requests sent to a RADIUS Server will include the username "$enab15$".
    Have you configured a user named "$enab15$" on the RADIUS server?
    e.g.:
    If you were using Cisco Secure ACS, and did not configure such a user, the log would indicate an Authentication Failure Code of "CS user unknown", and the username listed would be "$enab15$".

  • ODI Studio Slow when accessed via Citrix

    Hi !
    I login to ODI via Citrix Server. My ODI is installed on Citrix machine and my master repository and my work repository at a database which is not installed on the citrix machine.
    When i see the solution that is provided earlier in this thread to have the work repository setup locally - does this mean that the work repository needs to be setup on a database on citrix where my ODI is installed?
    Please validate and provide further inputs as to what are the other ways to resolve this issue.
    Thanks & Regards,
    Prerna

    Hi Phanikanth
    Yes i did, the problem is when a user is created and if i logged in using that user ODI studio is very slow, but if i logged in using supervisor it works absolutely fine.
    Regards
    KK

Maybe you are looking for