_10.7 push install failed, and fubar'd everything

Just got a push notice to update to 10.7 (from 10.6.??).  I acked the message, and after a zillion minutes, got an error message that the install failed, and that I need to do download only and manually install.  So, I tried that.  Failed with-- "The installer as encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2324."  So, I tried uninstall, presumably of the 10.6.?? that's been on the machine for a while, and has been working.  Uninstall fails with same error as above.  So... I downloaded 10.7 and tried to install ON TOP OF current, still working install.  Same permission error, and now, whatever munged version is actually on the machine (the previously working 10.6, 10.7, or some amalgam of the two) gives me the following error when I attempt to run it-- "The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions."  If I Explorer to %ProgramFiles(x86)%\iTunes, I get "... is not accessible. Access is denied."  I CAN access %ProgramFiles%\iTunes (the 64 bit folder), and there are files... but nothing executable... just a resource folder and a handful of dll's. 
I am admin on the machine (actually, I am the ONLY human account on the machine... only others are typical system service accounts).  Machine is WIN7 Premium, SP1.  It is very stable, has no recent (in the last month or so) changes, except a hanful of Windows Update patched from last week. 
Suggestions on how to get the machine out of this "iTunes is broken, but can't uninstall/install to fix it" loop??? 
Grrrrrr.

Community support seems to be slow moving .  Others not having this problem?
I spent 4 hours culling through registry, killing off any keys that remotely resembled "apple" or "itunes," manually deleted program files, and then forced msiexec to unregister the GUID, mixed in with a zillion reboots, and was able to install 10.7 clean.  BTW, SAME problem on second machine... so it is highly unlikely this is "a Windows problem."  Apple, please check your installer package... methinks it'd fubar.

Similar Messages

  • The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

    Question: The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

    Absolutely - but I had no idea there were two versions. When I got my new laptop I just went to the Adobe site to download and install LR5. It never asked if I had a license; it just directed me to install CC to start a trial which I thought I could license after downloading. Several sessions and many hours of looking through the forums and Google for an answer I never ran across anything that made this distinction. I still haven't found a path from www.adobe.com that would get me to the standalone download page (it's probably there, wasn't obvious to me) and looking at the download page it doesn't make any CC/standalone distinction.
    There are many places I could have gotten a hint - for instance the license could be tagged "stand alone edition", the CC-version could recognize the stand-alone key and either accept it or produce a more meaningful error message, or the download site or the CC app could ask if I had previously purchased a key, etc.
    It was my error to assume this was a deactivation problem, but it looked the same as a previous deactivation problem with Photoshop.
    In any event, thank you for your help.

  • Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

    Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
    iTunes no longer recognizes my airport express.
    Error Message:
    None of the selected updates could be installed.
    An unexpected error occurred.
    Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
    Any sugestions?

    I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

  • Installing Mountain Lion from Snow Leopard, Install failed and HD write-locked

    I recently downloaded the mountain lion installer from the App Store and I ran the installer. Stupid person as I am, I did not have any backups for my file and I naively assumed that an apple OS installer would be without flaws. Boy, was I wrong. I need every bytes of my data (or close to every bytes) but the installer failed.
    Mid installation, the installer stopped and said that the installation failed and that I need to repair my disk. So I restarted the computer and I ran disk utilities (my start up disk was the OS installer and the installer allows me to run several programs, including terminal, disk utilities, and by the way, when I held option while starting up to see which start up disks I have, I only had the OS installer as the start up disk. Also, the installer allows me to run a program called "Startup Disk" when I click on the apple logo on the top left corner, but it doesn't allow me to startup my computer using Macintosh HD) and noticed that when I highlighted Macintosh HD, my "Repair Disk" button was grayed out. So first things first, I ran the "Verify Disk" button but after a minute or so, Disk Utilities said that verification failed and that Macintosh HD needs to be repaired. But the "repair disk" button is grayed out! So I went to the Mountain Lion installer again and ran it. Of course, it failed again so I restarted the computer.
    So I tried to first back up all files in Macintosh HD to an external hard drive using Disk Utilities, and I used features such as "New Image" and "Restore" but they both ended up in "Input/Output error". I tried many methods with Disk Utilities but they resulted in errors.
    After some research, I noticed that some people's computers worked after they reset their PRAM. So that's what I did. I held command+option+P+R when computer started up and I reset the PRAM. When the start up disk (which is the OS installer, not the normal operating system) loaded, I was greeted with choose languages option and then I was back in the Mountain Lion installer state. I again ran the installer again, hoping something would be different, but then it was different. But not in a good way. When I was told to choose where I would like to install Mountain Lion, I noticed that Macintosh HD was grayed out. Last time, I was at least able to run the installer but this time, Macintosh HD was grayed out. The installer said that my Macintosh HD was locked. After some research, I learned that apparently, the Mountain Lion installer write-locks Macintosh HD mid installation.
    So now I am stuck and I am thinking of two things (plus some questions)
    1. I am wondering if there is a way to unlock Macintosh HD. But even if I can unlock Macintosh HD, there is no guarantee that the installer will successfully install Mountain Lion, am I right?
    a. so how can I un-write-lock Macintosh HD?
    2. More realistically, I am thinking of borrowing someone else's macintosh computer and use it as the backup center. I have a firewire cable and a terrabyte external hard drive. So what I'm thinking is that I'll hook my computer in target mode to my friend's computer and I will also plug in my external hard drive to my friend's computer and then I can download and run Carbon Copy Cloner from my friend's computer to copy all data from my Macintosh HD to my external hard drive. And then I will erase my Macintosh HD, freshly install Mountain Lion onto it and then copy all data back from my external hard drive. But I am not sure about few things.
    a. it looks like my Macintosh HD is write-locked. Can I still use Carbon Copy Cloner to copy all data from Macintosh HD (in target mode) to my external hard drive?
    b. will my computer allow me to erase (or format) Macintosh HD?
    c. will my erased/formatted Macintosh HD able to install + be installed Mountain Lion OS?
    If you are here, then you have read my long long problem. Thank you very much and I would really really really appreciate your answers and opinions. Thanks

    I'm not sure where you read that about the disk being "write-locked." That doesn't make much sense, given that the major task an installer like this must achieve is writing a whole bunch of files to the hard drive. I think your source was mistaken.
    As to what happened, it sounds like your hard drive was badly corrupt to start with, or possibly was on the edge of failing and is now in the process of dying entirely. If you don't have backups of your data, that does not bode well for you, unfortunately. If you can manage to use target mode to copy your data, do that.
    Once you're sure you've got all your data, you need to start up from your Snow Leopard install disk and repair the hard drive. (Since it sounds like the Mountain Lion installer didn't work, I wouldn't trust the recovery partition that Mountain Lion installs.) Or, even better, just erase the hard drive entirely and reinstall Snow Leopard. Then, once you're back up and running, with all your data back on the system and with Snow Leopard updated to the most recent version, try installing Mountain Lion again. If any of that fails again, the problem is likely to be a dying hard drive, and you'll need to replace it.

  • Install failed and now computer won't reboot!

    Hi there,
    I have tried to install the snow leopard 10.6.3 update CD on my Mac and I was told it failed and that I needed to restart - however, I hit restart and I get the start-up chime and apple logo on white with spinning gear underneath, but that's as far as I get! It just freezes everytime. I could hear the CD spinning around like it was trying to start which I thought might be causing issues - so I held down eject and got it out but the computer still won't load.
    I have tried holding down 'Alt' when it first boots and I get the choice to boot from the Hard drive or CD-rom but clicking either seems to do nothing. I read somewhere to hold C but this doesn't seem to do anything either.
    Any help would be much appreciated!

    Sounds like your boot drive died, take the machine to a local PC/Mac tech and let them install a new boot drive and provide the 10.6 disks as it contains the full version of OS X. You can reinstall the iLife from the 10.5 disks.
    Far as your old drive, hopefully data recover isn't necessary if you have backups.
    It can be many thousands of dollars if the drive platters need to be dissected, if the drive works and Data Rescue can be used with a external SATA to USB adpater cable, then it's about $150 for that.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Leopard Upgrade/Install Fails and Fails Miserably

    Normally, I love my Mac. It's a Dual G5 PowerMac. I've owned Macs forever. Usually, I don't have any problems. Until now.
    Here's my story:
    My HD failed the Sat. before Xmas. I had my computer backuped to an external firewire drive, so I wasn't too worried. I got two SATA drives and replaced my single internal drive with a RAID 1 pair. Autobackup now. Simple. I restored the backup to the mac and everything was running smoothly under Tiger.
    I got the Leopard Upgrade for Xmas and went to install in on New Year's day. My computer still isn't working.
    I booted it up from the DVD and let it run through the DVD check. Everything was fine. I went in and, even though I knew better, I just told the installer to upgrade the current OS folder. THat got almost all the way through when I got a rather harsh, "THERE WAS SOME ERROR INSTALLING ESPON STUFF. INSTALLATION FAILED." warning. What's odd is that I don't have an Epson printer.
    I rebooted and tried a clean install, copying over my directory and network settings. Well, that sort of worked. I got into the desktop, but my folder/network stuff hadn't copied, and many control panels would crash the "system settings" program.
    I gave up, rebooted back into Tiger from my external HD, and restored the RAID pair back to Tiger. I then tried installing Leopard again, a clean install this time. Again, I got to the "Epson" error and had to bail.
    I then restored and tried again.
    It got to about "9 minutes reamining" and sat there for several hours before I gave up and reimaged the HD. Again.
    That was this AM. I tried to install Leopard straight away with a clean install, pulling over my folders/network stuff. When I left for work, it was sitting at "14 minutes remaining..." When I got home, it's sitting at, "14 Minutes remaining..."
    I'm seriously at my wit's end here, and I'm ready to throw the install DVD at a Genius at the Genius Bar...
    What's going on and why won't Leopard install correctly on my machine?
    Thanks!

    I've read many reports that say there are problems with Leopard installing to a raid that was created with older versions of Disk Utility.
    "The only workaround was to do a fresh install of Leopard on my external FireWire HD, transfer all data using the Migration Assistant, erase the RAID and recreate it with the latest Apple RAID software, install Leopard on the new RAID, and finally transfer the data from the FireWire HD with the Migration Assistant. This took a lot of time, but it worked and Leopard is running fine on my RAID, and the machine looks as if I did a straight upgrade."
    I busted my raid apart when installing Leopard Server because of all the problems I had been reading about. It hadn't occurred to me that the raid should have to be set up with the Leopard DVD...

  • Operating system install fails and reboots SCCM 2012 r2

    Image was working and pushing out just fine then stopped.  Might have been when we upgraded from adk8 to adk8.1 not sure.
    Below is log from client machine.  Very new to Sccm and I don't know what I am to look for.  Variables.dat is red and failing but I don't know what that is or where I check that data?   Nic is working as I can map to share and copy off
    log files so I don't believe it is a nic issue.
    Thanks for any help!
    ==============================[ TSBootShell.exe ]============================== TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
    Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
    Debug shell is enabled TSBootShell 8/25/2014 10:20:04 AM 868 (0x0364)
    Waiting for PNP initialization... TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    RAM Disk Boot Path: NET(0)\BOOT\X64\IMAGES\BOOT.SHQ0003D.WIM TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    Booted from network (PXE) TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    Network(PXE) path: X:\sms\data\ TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    Found config path X:\sms\data\ TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    This is not a fixed non usb disk TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    Booting from removable media, not restoring bootloaders on hard drive TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    X:\sms\data\WinPE does not exist. TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    X:\_SmsTsWinPE\WinPE does not exist. TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    Executing command line: wpeinit.exe -winpe TSBootShell 8/25/2014 10:20:04 AM 872 (0x0368)
    Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
    The command completed successfully. TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
    Successfully launched command shell. TSBootShell 8/25/2014 10:20:05 AM 868 (0x0364)
    The command completed successfully. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    Starting DNS client service. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\ TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    The command completed successfully. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    ==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\ TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL' TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Current OS version is 6.2.9200.0 TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    PXE Boot with Root = X:\ TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Executing from PXE in WinPE TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    Loading TsPxe.dll from X:\sms\bin\x64\TsPxe.dll TSMBootstrap 8/25/2014 10:20:15 AM 876 (0x036C)
    TsPxe.dll loaded TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Device has PXE booted TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Succesfully added firewall rule for Tftp TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Executing: X:\sms\bin\x64\smstftp.exe -i 172.16.1.5 get  X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Command line for extension .exe is "%1" %* TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Set command line: "X:\sms\bin\x64\smstftp.exe" -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 172.16.1.5 get X:\sms\data\variables.dat TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Process completed with exit code 1 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Succesfully removed firewall rule for Tftp TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Failed to download pxe variable file. Code(0x00000001) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    PxeGetPxeData failed with 0x80004005 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2665) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\qfe\nts\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Exiting with return code 0x80004005 TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553) TSPxe 8/25/2014 10:20:15 AM 876 (0x036C)
    Execution complete. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    ::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,809) TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    GetTsRegValue() is unsuccessful. 0x80070002. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    End program:  TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    Finalizing logging from process 864 TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    Finalizing logs to root of first available drive TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    Successfully finalized logs to X:\SMSTSLog TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)
    Cleaning up task sequencing logging configuration. TSBootShell 8/25/2014 10:20:15 AM 872 (0x0368)

    Found problem:
    was not reinstalling pxe and wds in right order. followed this thread
    http://blogs.technet.com/b/configurationmgr/archive/2011/01/05/troubleshooting-the-pxe-service-point-and-wds-in-configuration-manager-2007.aspx  
    now all is working again.

  • Mountain Lion install failed and now can't access HD

    Currently on a Early 2011 high-end Macbook Pro running Snow Leopard.
    I downloaded and then went to install Mountain Lion, everything was fine and it began to restart for the install after the initial loading thing. However, when it came to install it gave me an error that roughly said the drive is damaged and can't be repaired, telling me to click restart and try installing again. I did this, (taking slightly longer and the colour of the background became more yellow at one point) but instead of the logon pane it went to OSX Utilities.
    On Disk Utility, it said Macintosh HD was unmounted. Below that, under 'disk1' Mac OS X Install ESD appears and then below that under 'disk2' Mac OS X Base System is shown. I tried to mount the HD but it didn't work, and when I tried to repair the disk it said it couldn't be repaired and that I should back up my files. I do think my files are still present, I was able to access them on the Burn pane through the finder window. I then tried to reboot using the Macintosh HD startup disk but that then said it didn't have enough information to do so.
    This person's problem (https://discussions.apple.com/thread/3192437) seemed almost identical to mine, however I have files I need and cannot afford to lose them. What do you suggest I do to retrieve my files? That is what I am solely concerned for right now. I backed up the most important files earlier, but I really do not want to lose everything.

    Whatever you do, DO NOT REFORMAT THE DRIVE. You can just get a small <500Gb EXTERNAL bus powered drive, dismantle it and follow the instructions above. If you already have one then that's even better.
    The drive I'm showing here is the drive that used to be inside of my computer. It took apart an old 320Gb seagate drive. The connections on these drives are all universally interchangeable. They just add some circuits and a USB (or other) interface. I would just get the cheapest drive that you can get that is for laptops and looks simple to take apart. (This is almost exactly the drive that I did this too http://www.amazon.com/Seagate-FreeAgent-Portable-External-ST903203FAA2E1-RK/dp/B 001FWIE0K/ref=sr_1_56?ie=UTF8&qid=1343340447&sr=8-56&keywords=seagate+external+h ard+drive)
    The "old internal" drive should still be able to allow you to install ML on the "new" drive as long as you tell it to. It sounds complicated, but it's really not once you get in there and start doing it. It was actually quite easy.

  • EM12c install failed and deinstall not possible?

    Hi
    i´m having big trouble to install the EM 12c. My first installation try failed, so i think i make a big mistake and delete the folders manually and also with sqlplus delete the sysman schema.
    But now every installation hangs on that point
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Completed...
    INFO: oracle.sysman.top.oms:exiting the thread...
    INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Running the Schema Action, Schema Action Completed Successfully]
    INFO: oracle.sysman.top.oms: action logger path calculated finally: /u02/app/oracle/EM12/oms/sysman/log/schemamanager/m_012012_0409_PM/m_012012_0409_PM.TRANSX/
    INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 0
    INFO: oracle.sysman.top.oms:process_id:16oeq76ms5dhu
    INFO: oracle.sysman.top.oms:Failure...
    INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
    INFO: oracle.sysman.top.oms:1):
    ORA-00955: name is already used by an existing object
    File:/u02/app/oracle/EM12/oms/sysman/admin/emdrep/sql/core/latest/availability/availability_synonyms.sql
    Statement:CREATE PUBLIC SYNONYM MGMT_AVAILABILITY FOR MGMT_AVAILABILITY
    INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
    After that i try to delete the failure EM 12c installation with RepManager but it fails again
    ./RepManager vc-db1 1521 vcdb -action dropall -dbUser sys -dbPassword myPassword -dbRole sysdba -reposName SYSMAN -reposPassword myPassword -mwHome /u02/app/oracle/em12c -mwOraHome /u02/app/oracle/em12c/oms -oracleHome /u02/app/oracle/em12c/oms
    processing arguments
    compiling arguments for validation
    Enter password for: sys
    done checking required user credentials...
    done creating arguments...
    creating logger..
    Connection exception in action logger path calculated: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/
    action logger path calculated: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/
    action logger path calculated finally: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/
    no action logger file name from previous session
    action logger filename after search: emschema.log
    action logger filename finally: emschema.log
    filename: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/emschema.log
    newly created: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/emschema.log
    Driver: oracle.jdbc.driver.OracleDriver
    jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(Host=vc-db1)(Port=1521)))(CONNECT_DATA=(SID=vcdb)))
    action to perform is: drop
    action is non-transx - RCU based action
    logger null: check if repos user exists..
    logger null: found connection for DB user
    logger null: query DB for repos user existence check
    logger null: REPOS_CONN is null in check repos user... creating new one
    jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(Host=vc-db1)(Port=1521)))(CONNECT_DATA=(SID=vcdb)))
    jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(Host=vc-db1)(Port=1521)))(CONNECT_DATA=(SID=vcdb)))
    logger null: connection is found null
    Error found: Validierungsfehler für Aktion: [DROP]. Die Fehlerursache war: [null repos-connection found]
    Dropping MDS schema...
    Enter sys user password : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Verify : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Common components home from environment is /u02/app/oracle/em12c/oracle_common
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Dropping OPSS schema...
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Component is already dropped
    Dropping APM schema...
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Component is already dropped
    Dropping BIP schema...
    Enter sys user password : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Verify : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Common components home from environment is /u02/app/oracle/em12c/oracle_common
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Is it not possible to delete the existing object with sqlplus, so that the installation process doens´t stopped with this terrible error message above?
    So i don´t know how to get a working Enterprise Manager 12c installation, hope anyone can help me in this issue.
    Kind regards
    ACID25
    Edited by: ACID25 on 24.01.2012 02:26
    Edited by: ACID25 on 24.01.2012 06:10
    Edited by: ACID25 on 24.01.2012 06:10

    Hi
    i´m having big trouble to install the EM 12c. My first installation try failed, so i think i make a big mistake and delete the folders manually and also with sqlplus delete the sysman schema.
    But now every installation hangs on that point
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Still Running...
    INFO: oracle.sysman.top.oms:Completed...
    INFO: oracle.sysman.top.oms:exiting the thread...
    INFO: oracle.sysman.top.oms:[Initializing the EM RCU Runner, Running the Schema Action, Schema Action Completed Successfully]
    INFO: oracle.sysman.top.oms: action logger path calculated finally: /u02/app/oracle/EM12/oms/sysman/log/schemamanager/m_012012_0409_PM/m_012012_0409_PM.TRANSX/
    INFO: oracle.sysman.top.oms:The transx command execution is completed with the status 0
    INFO: oracle.sysman.top.oms:process_id:16oeq76ms5dhu
    INFO: oracle.sysman.top.oms:Failure...
    INFO: oracle.sysman.top.oms:1 error(s) happened in performing the action:
    INFO: oracle.sysman.top.oms:1):
    ORA-00955: name is already used by an existing object
    File:/u02/app/oracle/EM12/oms/sysman/admin/emdrep/sql/core/latest/availability/availability_synonyms.sql
    Statement:CREATE PUBLIC SYNONYM MGMT_AVAILABILITY FOR MGMT_AVAILABILITY
    INFO: oracle.sysman.top.oms:The plug-in Repository Configuration has failed its perform method
    After that i try to delete the failure EM 12c installation with RepManager but it fails again
    ./RepManager vc-db1 1521 vcdb -action dropall -dbUser sys -dbPassword myPassword -dbRole sysdba -reposName SYSMAN -reposPassword myPassword -mwHome /u02/app/oracle/em12c -mwOraHome /u02/app/oracle/em12c/oms -oracleHome /u02/app/oracle/em12c/oms
    processing arguments
    compiling arguments for validation
    Enter password for: sys
    done checking required user credentials...
    done creating arguments...
    creating logger..
    Connection exception in action logger path calculated: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/
    action logger path calculated: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/
    action logger path calculated finally: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/
    no action logger file name from previous session
    action logger filename after search: emschema.log
    action logger filename finally: emschema.log
    filename: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/emschema.log
    newly created: /u02/app/oracle/em12c/oms/sysman/log/schemamanager/emschema.log
    Driver: oracle.jdbc.driver.OracleDriver
    jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(Host=vc-db1)(Port=1521)))(CONNECT_DATA=(SID=vcdb)))
    action to perform is: drop
    action is non-transx - RCU based action
    logger null: check if repos user exists..
    logger null: found connection for DB user
    logger null: query DB for repos user existence check
    logger null: REPOS_CONN is null in check repos user... creating new one
    jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(Host=vc-db1)(Port=1521)))(CONNECT_DATA=(SID=vcdb)))
    jdbcUrl = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(Host=vc-db1)(Port=1521)))(CONNECT_DATA=(SID=vcdb)))
    logger null: connection is found null
    Error found: Validierungsfehler für Aktion: [DROP]. Die Fehlerursache war: [null repos-connection found]
    Dropping MDS schema...
    Enter sys user password : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Verify : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Common components home from environment is /u02/app/oracle/em12c/oracle_common
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Dropping OPSS schema...
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Component is already dropped
    Dropping APM schema...
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Component is already dropped
    Dropping BIP schema...
    Enter sys user password : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Verify : stty: Standardeingabe: Das Argument ist ungültig
    stty: Standardeingabe: Das Argument ist ungültig
    Common components home from environment is /u02/app/oracle/em12c/oracle_common
    Befehlszeile wird verarbeitet...
    Utility für das Erstellen des Repositorys - Voraussetzungsprüfungen werden ausgeführt
    Globale Voraussetzungen werden geprüft
    RCU-6013:Das angegebene Präfix ist nicht vorhanden. Vorhandene Präfixe sind: Keine
    RCU-6091:Validierung von Komponentenname/Schemapräfix nicht erfolgreich.
    Is it not possible to delete the existing object with sqlplus, so that the installation process doens´t stopped with this terrible error message above?
    So i don´t know how to get a working Enterprise Manager 12c installation, hope anyone can help me in this issue.
    Kind regards
    ACID25
    Edited by: ACID25 on 24.01.2012 02:26
    Edited by: ACID25 on 24.01.2012 06:10
    Edited by: ACID25 on 24.01.2012 06:10

  • Adobe reader install fails and video blanks

    Had to reinstall XP due to Trojan problem.  Now I am unable to reinstall either Flash or Reader.  Download is ok but install only gets half way before blanking the video.  The monitor status goes to yellow.  Other aps have been downloaded and installed ok.
    Computer has to sit for a while before the video reinitializes.  Everything else seems to work.  Video is stable until I try to install these Adobe products.  Computer shop that did the work was no help.

    Screen going black/green/yellow indicates a problem with the graphics driver; install the latest device driver for your display adapter - see http://forums.adobe.com/thread/945765
    As for the installers going only to 30/40%: download and run the offline installers
    Reader: http://get.adobe.com/reader/enterprise/
    Flash Player: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

  • Help - 9.0 install failing and eating my hard drive / Premier missing

    I have windows 7 / 64 bit / home premium  - 3/0 Ghz / Quad core
    I posted earlier. I have tried several times to load 9.0. during my first unsuccessful install, the "creating catalog process" hung, and after I closed the program, my hard disk space decreased by 45 GB.
    I then uninstalled, shut down, cleared all temp files, defragged, optimized disk, and cleaned up registry. I then re-instelled and it hung on "Creating catalog" again. I figured I would let it go and see what happened. I returned 40 minutes later and it was nowhere. I cllicked and it said "not reposnding".
    Now - I check my hard drive , and it has decreased from an available 120 GB (before 1st install ) to now only 31.7 GB! I can not find where my hard drive is being conusmed.
    As a second step, I tried to load disk 1 and disk 2 on another computer. Elements installed ok, but on loading Disk 2, it gave me the same error as Pc #1 - It said Program is corrupt or not installed. Also note that Disk 1 does not install Premier elements on either computer - no where to be found. Isn't Disk 2 suppose to only be content.?
    I need help badly.
    Thanks

    Hi,
    Could I please request you to provide us following log files so that we can debug your issue:
    Location: Go to Start Menu-> Run->%temp%
    Files: Pre9.log, PRE9Installer.log.
    Yes, you are right that you need to install application(Disk 1) first before installing Content(Disk 2). So, insert Premiere Elements Disk1 and install application first. Once it is successful, then insert disk 2 to install Content.
    Please note that Content will not get installed unless application is installed.
    It would be great if you can provide screenshot of error messages that you are getting.
    Thanks & Regards,
    Gaurav

  • Adobe reader install failed AND......

    I'M REALLY ANGRY.  I've had a program on my HP desktop ever since I bought it that I could always open pdf files.  I assume it was Adobe Acrobat.  A few days ago, I could still open all my files, but I could no longer print them.  They would just go into limbo and nothing ever happened.  Everything else I have prints fine.  SO, I uninstalled Adobe PDF reader and tried to reload the fre version out there, first Adobe X, then that didn't work, so I did it again and got Adobe free reader.  NOW, I find that ALL OF MY pdf files were converted in the process to Word file.  This PISSES me off.  How can I get them back to the pdf files that they were?  If I lose all of these, there will be big trouble.  Please, someone email me at [removed]

    You haven't said what OS you are using but to me it sounds like you simply have to reset your file associations to recognize Reader as the program used to open pdf files (the files themselves are probably just fine).
    Windows: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
    Mac: http://osxdaily.com/2009/10/25/change-file-associations-in-mac-os-x/

  • Firefix claims an update is available, and so I click to get it installed (I am running 5.0). I get a message that the install failed and that I need to make sure no other copies of FF are running on my computer. ??

    The bigger issue is that it tries to run the update every time I click on a URL (like from an email). And so it opens a window to locate a browser, then starts the update - which then crashes with the message about making sure no other copies of FF are running.

    Firefox [[Safe mode]] is a diagnostic mode that allows troubleshooting.<br />
    You start the same version, only some features are disable like add-ons (Tools > Add-ons > Extensions).
    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    C:\Users\&lt;user&gt;\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)
    C:\Users\&lt;user&gt;\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\updates
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

  • Hard drive failed and i lost everything​! and after 2 years i bought the thing.

    I have a DV9815 laptop.  The hard drive failed after i was in the process of rebooting it.  All i want is to talk to HP by Email.  Now is that hard to do since i cant find an email?!  I need a replacement Operating system since it said "No OS found".  I want Wndows XP professional instead of Wndows Vista Home Priemium.  I do legally own a copy of Windows Vista but i want to downgrade to XP if i can without paying hundreds.
    This question was solved.
    View Solution.

    Hp is not going to give you XP, you will have to buy it if you want it.
    You can order recovery media here
     http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00810334&cc=us&lc=en&dlc=en
     This is a user to user forum, Contact HP directly, 
    USA
    http://welcome.hp.com/country/us/en/contact_us.htm​l
    Everywhere else
    http://welcome.hp.com/country/us/en/wwcontact_us.h​tml

  • Adobe Reader XI(11.0.07) installer gives me a message that the install failed and check my software manufacturer.  Who do I contact?

    Anyone having trouble installing Adobe ReaderXI (11.0.07)?

    Hi Gary,
    I notice you've recently reached level 6. Congratulations! Hopefully you should find a link to The Lounge appears on your discussions home page in the near future. Look forward to seeing you in the Water Cooler soon.
    tt2

Maybe you are looking for