10.8.2 audio jack issue fix with a 15" retina Macbook Pro

OK so I had an issue where I could not get the headphone jack to work whatso ever with multiple pairs of headphones. I barely used the port so I i'm not sure what exactly the problem is down to as I had recently installed a ton for new software thank to MacHeist charity bundle and also putting on Logmein.
I also occasional  watch content via the hdmi out with audio going into my Onkyo tx-nr616 reciever. This weirdly enough proved to be the key in getting my headphone jack to work again.
I had tried removing he sound drivers for Logmein to no avail. I was backing up via time machine when i though to try playing some music via the hdmi out. The sound device poped up in outputs in sound as expected. then i plugged in the headphones and the 'internal speakers' changed to 'headphones. I pulled the hdmi lead and there I had it.... audio through the **** headphones again!
Problem is if i'm away from home again and not near a hdmi cable this is gonna be a pain. Apple clearly need to look into this as a few people have reported issues from a few searches i've seen. Hope this helps all.
Weird my bootcamped Windows 8 had the same issue! 

This ended up going into a authorised repair centre, i'm awaiting its return....

Similar Messages

  • Yosemite is messing with my new Retina Macbook Pro's sound output, help.

    I just got my new Retina Macbook Pro 2 months ago and have been noticing some audio output issues. When I try to connect an external third-party audio device to run my KRK monitors my computer does not recognize the device and will not switch the audio output. After trying to set it manually my macbook won't even revert to the internal speakers for output and then I have to reboot my pro in order to get audio output again. This will happen randomly throughout the day after my computer has been in sleep as well, and sometimes the volume buttons get greyed out as well. Please help me with this issue as this is a new computer and it is becoming a nuisance. Even when connecting through HDMI, my audio output does not function and no sound will come out of the TV. I realize that this is probably a Yosemite glitch, but I just need to know if there is any fixes for this issue. Thanks so much for your time,
    Sam Migliazza
    <Email Edited by Host>

    You are entitled to 90 day telephone support from Apple. Try contacting them.
    Apple Support Contact
    Apple Support contact - Telephone

  • Multiple problems with my 2012 Retina Macbook Pro

    Hi,
    I just got my 2012 Retina MBP with 16GB RAM and 768 GB HD. OS X Lion 10.7.4 is running and all requisite updates are installed. I am quite surprised at what I think are bugs that are associated with this MBP. Here are my issues. Hopefully someone can assist. Today being the 4th of July, their phone support is offline.
    1. The trackpad does not work well after I open the trackpad app via preferences. I cannot scroll or do Mission Control or Expose for instance.
         Yes, I have installed the following update to no avail: http://support.apple.com/kb/DL1543
          No, I do not see the "Macbook Pro Trackupade Update" as described within the following article: http://support.apple.com/kb/TS4297? viewlocale=en_US&locale=en_US
    2. Whenever I swipe with my 4 fingers to get to the next screen, the screen darkens and becomes completely black. This is highly unusual and does not happen with my Macbook Air or my imac.
    3. I have about 4 Safari windows running on seperate screens and this seems to bring my machine to a crawl. This again has never been a problem with my MBA or my IMAC.
    Pls Help!!
    P.S. I will pay the "Geniuses" a visit tomorrow.

    Regarding point#2:
    The Safari issue has abated however I observed that the "Windowserver" process is consistently taking up 90-100% of the CPU and thus bringing my machine to a crawl. It seems like others are experiencing similar issues. Here is one instance where this person's "windowserver" process is crashing.
    https://discussions.apple.com/message/18817381#18817381
    This is very disappointing and underwhelming.

  • Can I use my wireless remote with my new retina macbook pro

    can I use my apple wireless remote with my 15"retina mmacbook that I bought three months ago?

    If you mean the remote that controls an Apple TV device, I do not think so.
    Barry

  • I have an old 23 inch cinema display will it be compadible with the new retina MacBook pro?

    So I have an old 23 inch cinema display from 2006 and it's been in our basement for a few years and I'm going to buy the new MacBook pro with retina display I'm wondering if these 2 products will be compatible so I could work at my desk the display Powers up fine I just need to know if they're compatible ?

    Assuming your 23" Cinema Display has a DVI connector or a built-in DVI cable, all you'll need will be a mini-displayport-to-single-link-DVI adapter or cable, and the display should work well.

  • Issues with sleep/wake with 2014 retina Macbook pro

    Hello everyone,
    I have lately been noticing some issues with my 2014 13" retina macbook pro when sleeping and waking. As soon as my laptop goes into sleep while I am using I move the mouse around from the track pad to wake it back up. When i do that it takes the latop around 2 mins to get the login screen up where i put in my password to log on. The screen stays blank for 2 mins and I am just sitting around waiting to log back in. Is anyone else having this issue with there 2014 retina macbook pros? Anyone know of any fixes? I have just updated my laptop to Mavericks 10.9.3 and the issue are still there.

    I upgraded my early 2011 MBP to 16 gigs with Crucial. My machine would not sleep properly, because when I tried to wake it, it would wake from its hibernate image file. This is the issue I've seen here in this list.
    I tried all the suggestions I saw on these groups. Nothing helped. I contacted Crucial, who suggested that if their RAM was defective, they'd replace it per their warranty process. I needed some proof it was their RAM causing the problem.
    I put the original 8 gigs RAM back in the machine (2 4 gig sticks), and it behaved normally. I then put one stick of Crucial RAM in, all by itself. The machine behaved normally. I put the other stick of Crucial RAM back in, and took the first one out. The machine would not properly sleep and wake from sleep. This proved that one stick was causing the problem, and the other was not.
    Defective RAM!
    I then requested and received an RMA from Crucial to send the defective RAM back. They paid shipping. I got new sticks of RAM about a week later. These new sticks of RAM work properly. No sleep issues.
    I'm surprised and disappointed to say that this is not the first time I've received defective RAM from Crucial. I've purchased from them for years, and had GREAT service and received high quality products. The past couple years my experience has been different.
    I'm still pretty steamed about this, as I spent a great deal of time trying to diagnose the problem and fix it. I don't really have that kind of time to waste. My expectation was that their RAM was high quality, and unlikely to be at fault.
    Perhaps this is just a bad batch of RAM. I get that. I can forgive them once. But this has happened twice in the past three years. I'll look elsewhere for my next memory purchase.
    Keep in mind that their customer ratings are generally very high. My experience is probably  isolated.

  • Is WiFi connection issue fix with IPAD3

    Is WiFi connection / Dis Connection issue fix with IPAD3

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Top 15 Issues/Fixes Needed in the next Premiere Pro release/update (CS6.5 or CS7)

    I’m excited for what’s coming next in Premiere Pro CS6.5 or CS7 (whichever update is next). As a former FCP7 user myself, Premiere CS6 was a quick and necessary switch (especially after changing the main keyboard shortcuts back to what I was used to). I’ve since gone back to FCP7 on occasion for certain things and I can tell you that I’m so glad I’ve switched. For all the headaches and serious errors that I still get daily/weekly with Premiere Pro CS6, it’s still definitely a big step up. I'm encouraged by staff members like Mitch W. that have expressed confidence that many of these issues will be resolved in the next release. Here is my personal list of “Top 15 issues/fixes” needed in the current Premiere Pro CS6…
    (Adobe STAFF...feel free to print this out and hand it to the engineers responsible for making changes )
    1) The infamous multicam FLAW. Needing no introduction…when you are editing your video in the multicam window and you hit pause or stop Premiere has decided that’s a great time to make a cut on your timeline and also switch angles back to the original angle whether you like it or not. You cannot stop ever while editing multicam without Premiere making these unwanted cuts and angle changes. Awful. Multicam in PPro is otherwise pretty nice, but this issue is terribly counter-productive especially when you are editing longer complex multicam sequences. Imagine if every time you hit pause or stop in the regular timeline it made a cut there and switched clips. Ugh. You get my point.
    2) The audio meters/levels do not work while in the multicam window. A staff member in the forums (I think it was you) said this was a bug. Hope it will get fixed. The audio levels work in every other window and its essential to be able to keep an eye on the levels while editing multicam.
    3) Ticktime.cpp-207 error. Ugh. What a nightmare. I have confidence that it will be fixed soon. Mitch W. from the forums is my new hero for taking on this error. How to replicate it?…simply have 6 (or 7) or more clips with the warp stabilizer effect added on the same timeline as a nested multicam clip and you get this error upon reopening your project. The more warp stabilizers you use, the more times you’ll have to hit “continue” to get through the error before you can open your project or export it to AME. I deal with this every single day because all my projects use these two elements. Most of my projects I have to hit “continue” on the error message upwards of 350-450 times to open my projects. Gets old fast.
    4) Icon View order control. When you display all your clips in icon view instead of a list view (In the project window), there is no metadata to allow you to put the clips in order somehow (or at least maintain the order that you have in the list). There are roundabout workarounds, but c’mon.
    5) Warp Stabilizer fixes…it is an AMAZING tool (far, far, far better than smoothcam in FCP7) BUT…it has it’s issues. Since I use hundreds of times/week (no exaggeration) I know it’s functions/flaws really well. The issues with Warp Stabilizer:
    a) #3 above
    b) Toggle OFF the effect after it’s applied and then hit Analyze again and PPro crashes. (easy to avoid but annoying bug)
    c) If a clip is in the middle of stabilizing (not just analyzing…but the final step labeled “analyzing”) when Auto-save comes up…most of the time PPro freezes and crashes.
    d) The DEFAULT “method” (in the settings for Warp Stabilizer) should NOT be “Subspace Warp”…it should be “Position, Scale, Rotation”. Why? It’s FAAAAARRRR better and more efficient. 95 out of 100 times it causes MUCH less “wobble” in the final stabilized clips AND most importantly 95 out of 100 times it scales the video less. Way better method.
    6) The ability to open multiple projects simultaneously. As simple as FCP7 had it…or even better…as cool and efficient as FCPX does it would be nice.
    7) The ability to mark a clip and not just a point on a timeline (because if you move the clip, the marker doesn’t go with it). I know you can use “Clip Marker” but it's very limiting, can't be moved, can't add notes, can't advance to the next marker (as far as I know). Also a marker list like FCPX has would be nice so you can see your markers all in a list at a glance and adjust them as needed.
    8) Ability to select a clip in the Project window and find out where it’s used in the timeline. I LOVE how you can do the reverse and take a clip in the timeline and “Reveal in Project Window” but it would really help to go the other way around. Dealing with several hundred clips for every project I’ve missed this feature from time to time (FCPX handles this really well).
    9) Add a through-edit indicator in timeline and “re-join clips” option. If you cut a clip but keep both clips together it’s just one continuous clip. But I really hope Premiere adds the not only an indicator of some sort (like FCP7′s way of having two small red triangles facing each other on that cut) so you know it’s one continuous clip BUT ALSO the ability to right-click and “re-join” the two clips into one.
    10) When clip is double-clicked in timeline, CTI position in source viewer should match location in timeline. This one is pretty annoying and a fix would be incredibly helpful. The way it is now is very counter-productive. Definitely hope this gets fixed ASAP.
    11) Better border controls for images/videos. Can’t do much with images right now in PPro. At least allow to customize the color and size/strength of it’s borders and shadows.
    12) Better support for Mac/Apple's top end computers/GPU's. I'm still surprised that 2011 top of the line iMac cards (AMD 6970M) that have 2gb of ram are not supported. I’m sure/I hope 2012 iMac’s will be supported with their new Nvidia GPU’s…but I’ll hold out hope that the top iMac (up until 3 months ago) is supported at least at it’s full power. All around better Mac support would be great considering the wave of new users coming over from FCP.
    13) Opacity/Transparency issues with EXPORTED videos with Cross Dissolves, etc. For some odd reason videos exported from Premiere CS6 have issues with cross dissolves or minor transparency. I’ll try to explain…in the program window of PPro CS6 cross dissolves look fine. Also, if you take a clip and stack it on top of another clip and put the top clip at say 99% opacity instead of 100 it looks like it should in PPro. But, if you export the clips you’ll quickly see that there are issues. It’s almost like the exported videos dissolve from 5 to 95. They skip the subtle beginning (0-5%) and subtle end (95-100%) of any fade. A clip in PPro as described above that is on top of another but set at 99% will look more like 90-95% in the exported file ESPECIALLY if the two clips are contrasting (eg. top layer dark, bottom layer with bright elements). It’s like the opposit of ease-in/ease-out. I have to ease-in/ease-out of every dissolve to avoid this issue…and even then, it’s not THAT much of an “ease” as one would hope. Another user in a forum once posted a video that shows how abruptly exported videos end their transparency changes…see: THIS SAMPLE VIDEO  Perhaps this is a GPU/processing issue with AME vs. Premiere Pro but whatever it is, it should be fixed so videos you export look like the videos you edited!
    14) Better control in Creative Cloud over which devices are “activated/deactivated”  We have 3 computers and it would be nice if one could log in to their Creative Cloud account and see a list of which devices they have and just toggle on/off which one’s are activated/deactivated. This is especially helpful when you are mobile and forget to deactivate one of your two home/office devices so you’re stuck now until you get back to the home/office to deactivate it. This is not a Premiere thing, but just a general wish.
    15) Ability to sync multicam clips automatically using the audio. Plural eyes apparently does this well. Would be nice to have it built into Premiere like FCPX does. Select all the shots you want to sync, One button click, wait a few seconds, done.
    That’s my top 15. Everything else is awesome in my opinion for what I do 10 hours a day 6-7 days a week. I’ve included bug reports/feature requests for all of these at one point but if you are someone else reading this go to the following link and ask for these issues to be fixed: FEATURE REQUEST/BUG REPORT
    I wish Adobe did smaller updates more often. Because even if they were smaller updates, we’d at least know you are working on fixing some of these issues that have plagued this NLE for years. Holding off fixes for one or two big “updates” every year is tough to deal with in a world of the ever updating apps we live and play with daily on our phones. I realize Premiere is a much larger scale and far more professional than a phone app, but hopefully you get my point. Here’s to hoping the next release (NAB 2013?) resolves all my top 15 issues. Here’s to hoping that these issues will be resolved sooner than later so I can stop raising hell in various forums. I’m honestly ready to start praising and defending Premiere Pro instead of griping about it’s bugs and flaws. It’s a fantastic program “on the way” to being the best. I hope.

    Nice list, however it does seem a little bit like you may be hoping that Adobe provides the Final Cut 8 package that Apple never delivered on. Having edited primarily with P-Pro for the last decade, I hope Adobe focuses more on getting the next release to run as smooth as CS5x does, strangling and crucifying all the codec and playback bugs that arose in CS6. To me, it appeared that too many of the changes in CS6 were semantic or cosmetic, meant to give a FCP user more familiarity. Why change the name of an edit function from "overlay" to "overwrite" after 15 years? Because it enhances the product, or because that is what Apple called the function in FCP? If Adobe renames the Program Monitor to the "Canvas" with the next release, I think that I might be sick. There were nice additions to the Creative Suite as a whole, but I hope the next Premiere release reverses some missteps made in CS6, and focuses more on stability and enhanced functionality. I also really hope that they have an open ear towards criticism; Apple did not and their users ended up with FCP-X
    It saddens me that the fixes I want most in a future release were purposeful changes between CS5x and CS6x.
    1) Provide the options for transport controls in the source and program monitors. All of the users at my office hate that the jog and shuttle were removed in CS6. JKL was an option prior to CS6 and if we liked it we would have used it. I keep reading the justification that this change was meant to save space and streamline the UI. I can't express cordially how much this bothers me to look at the empty wasted space in my CS6 UI where the transport controls should be. The experiment has gone on long enough.
    2) Restore the 3 Way Color Corrector to its previous functionality. The 3 way color corrector has been effectively neutered in CS6. Where in CS5x and earlier releases one could separately target the input/output levels of Highlights, Midtones, and Shadows, CS6 has only a master input/output level control. Why is less control better? Is it a 3-Way Color Corrector or a 1-Way Color Corrector?
    3) Restore Clip and Timeline markers to their previous functionality. I don't even.... I can't. A user shouldn't have to do work arounds to create a modicum of functionality. This again was an attribute that wasn't broken in earlier releases.
    4) Simplify the the task of pasting media into a targeted track. As it is now, pasted items will always go to the lowest activated track instead of the targeted track.
    Lastly I would like the Adobe Premiere teams to consider what an amazing accomplishment Premiere CS5x was. Upon CS5's release, a good portion of competitor's workflows became obsolete. CS5.5 refined, stabilized, and expanded functionality.
    CS6 changed the UI around, moving or deleting buttons, changed keyboard shortcuts, and renamed functions. Oh, and added hoverscrub, you know...like FCPX. In exchanged there was loss of functionality, stability issues and broken codecs.
    I really hope the next release is more like CS5x and less like FCPX

  • Retina macbook pro with thunderbolt display causes speaker issues

    I have a thunderbolt display and used the speakers fine on old macbook pro. I now plug in my new retina macbook pro 15" with mountain lion and the sound plays fine for a while then starts to crackle real bad and then stops all together. If I switch the the laptop speakers then switch back after 30 or so minutes the thunderbolt speakers will work again for a short amount of time then again crackle and stop.
    This may be mountain lion related but I have tried another non-retina version macbook pro with mountain lion and did not notice the issue but it was only for an hour or so. So this leads me to belive its the computer.
    Any suggestions? its really really anoying and wasting my time trying to fix it.

    I have the exact same issue. I hauled the TB Display into the Apple Store 3 times and finally they replaced it. Come to find out this new one has the same issue still. So It has to be rMBP related at this point. Unfortunately I don't think I have it under warranty still and the issue is hard to demonstrate. I recorded videos of it but every time I go into the store and plug it is the same as switching the speakers from internal to external and it takes 30-60 mins before it degrates to scratching sounds.
    Please let me know if you ever foudn a solution. Im going to try to keep taking it in until I can get this resolved.

  • What is wrong with OSX on the MacBook Pro and when will it be fixed?

    When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.

    I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
    I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
    It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
    So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
    I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available.

  • Can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro

    can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro, will it work?

    Should work perfectly.

  • When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

  • Using third party headset with Retina Macbook Pro (microphone issue)

    Good day, everyone!
    I have very strange issue with my Retina Macbook Pro (Late 2013) OS X 10.9.3
    When I plug in my Steel Series Headset, its microphone not recognised by system and only "Internal microphone" available in Settings - Sound - Input.
    Headset itself works perfectly fine, because when I plug it to my iPhone, its microphone works without any problems.
    Macbook's headphone port also works fine — when I plug in my iPhone original headset to Macbook, its mic works good and I can see "External microphone" in Settings - Sound - Input.
    So headset is ok and headphone port is ok. What is the problem?
    How to force macbook to use headset microphone instead of built-in one?
    Thanks in advance

    Either contact the sales staff at the store where you ordered your Mac from or contact the speaker manufacturer & ask them.

  • Having start-up issues with my 1st gen Macbook Pro

    Hi everyone. I just started having start-up issues with my first generation Macbook Pro. It was working fine the other day when I last used it, but today I went to use it and it wont load up to my desktop...? It starts up (grey screen with the little swirly bar under the apple,) then it goes to a blue screen, then my background and dock appear, then (before any of my desktop files even show up,) it goes to a blue screen (that brightens up and then dims a little,) and it just keeps showing this with a little swirly progress symbol (shows when the screen is darker blue, then disappears when the screen is a brighter blue.) I've included a video that I took with my iPhone to show it situation. Any ideas as to what's wrong with it? Thanks in advance!
    http://youtu.be/oDCfHM-Zoes

    Safe Boot by restarting your computer while holding down the "shift" key.  Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
    As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory.  A corrupt cache here can cause the blue screen crash.  Once you restart normally, the cache will be recreated.  This should take care of the issue.
    http://support.apple.com/kb/HT1564
    http://support.apple.com/kb/HT1455
    Use Software Update to update your os to 10.6.8 and anything else that needs to be updated.

  • I have a National Lottery online account but for a while now i cannot access it from my MacBook. I can access it via other pc's and laptops and via my iphone. I have been on to the NL helpline and they say the issue is with cookies and my MacBook. Help!

    I have a National Lottery online account but for a while now i cannot access it from my MacBook. I can access it via other pc's and laptops and via my iphone. I have been on to the NL helpline and they say the issue is with cookies and my MacBook. Help!

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

Maybe you are looking for