10.8.2 Supplemental update crashes?

Hi All,
How are you getting on with the 10.8.2 supplemental update? Mine results in yet more problems.
After the update and subsequent restart, all was fine for about 4 hours, then total lock-up. I had to force restart my MBA and on boot-up I got loads of error messages scrolling on the grey apple screen, followed by a bunch of error text overlayed on the apple icon. To continue the re-boot I was invited to press a key or wait - I was too slow to take a pic of the screen to post here.
Any one else experiencing this and have advice?
Rob.

I had this problem and I used Disk Utility to find and repair my drive. I rebooted normally and all is now well.

Similar Messages

  • 10.8.5 Supplemental update is very buggy

    I am on a Mac Pro 2.8 (3.1) 2008 model.  12 Gb ram and a radeon 5870.  This supplemental update has been pretty horrible.  I have had the following issues: messed up sleep, random wake ups, and one hard crash.  I have also had the long sleep delay where the fans crank up and it takes forever to sleep...only a restart cures this, which is pretty useless.  The mach file showing but that was fixed with a terminal command.  Lost video chat icon on iMessage for a while but that has now mysteriously returned.  The last annoying bug I have suffered with is what seems like horribly reduced audio quality out of the Apple LED 24 inch cinema display speakers.  It sounds like 22kz mono both input and output.
    I would rate this update a full on zero out of ten, for creating problems that never existed in 10.8.5.
    Anyone else having these issues?
    Rupe.

    I'm not having those same problems, but my USB3 external drives attached via a USB3 hub still are ejected improperly when the machine goes to sleep.  Also, I've had aliases on the desktop disappear for no reason.  I regret updating to 10.8.5 due to all the weird problems, and the supplemental update fixed a few things but it's still buggy...  Fortunately, no data corruption from this.  I keep my fingers crossed.
    Since desktop sales represent 15% of Apple's revenues (and dropping), it's just a matter of time before they dump desktops all together. I see no reason why Apple would care if the desktop OS is buggy.

  • TS1702 NY post AP, after update, crashes upon launch.  Tried all re-starts & re-installs, to no avail.  Any ideas?

    NY post AP, after update, crashes upon launch.  Tried all re-starts & re-installs, to no avail.  Any ideas, or is it just my punishment for reading it at all?

    The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
    iTunes 7.0.2 FIX ("Have tried all 'fixes' suggested but iTunes STILL not opening").
    1. Uninstall iTunes and QuickTime.
    2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
    3. Restart the computer.
    4. Install QUICKTIME ONLY
    5. THEN install iTunes......and IT WORKS.....Just remember to install QuickTime FIRST.

  • "Software Update" crashes upon download

    Last week I was given a new Mac mini as a gift; I upgraded the memory to 2G; did Target Disk transfer from my old G4, then started using it (didn't use it before the memory or the transfer).
    Software Update crashes at the point when the download has just started, every time, even with individual small downloads. Other symptoms: Safari crashes upon start-up, any Widgets that look up info crash when they go get data. Firefox works but crashes accessing some video, same with Explorer.
    I have manually downloaded and upgraded to OSX 10.4.9. System can't recognize/mount the .dng download file to upgrade to 10.4.10 (I manually downloaded the Combo Intel). Java is 10.4.2, but when I try to install Java 10.4 Release 5, it tells me to upgrade to the previous version first (which is already installed).
    I suspect this is a Java and downloading glitch. Does Software Update rely on Java? Any ideas? I've searched the message boards for this problem, but haven't found anyone else with this problem.
    Many thanks in advance for any suggestions.

    MarkinArlington wrote:
    Thank you for your reply. I used the Setup Assistant to migrate from my G4.
    That's probably the cause of your issues. Apparently, the Setup Assitant will sometimes migrate (PowerPC-specific) system files over to Intel-based Macs (causing many odd problems), so using it to migrate from a PPC to an Intel Mac isn't recommended.
    Unfortunately, you will have to re-install Mac OS X to solve your issues (trying to figure out which specific files are causing the issues will probably be too long, with little chance of success); I don't know whether an Archive & Install is enough to fix this, but perhaps someone else knows? Otherwise you could ask in the Mac OS X v10.4 Tiger > Installation & Setup forum. If you need to do an Erase & Install, you will lose all data on your hard drive, so you'll need to create a backup of all your user files first.

  • Big hard drive problem after 10.8.5 supplemental update

    Hello, I just tried installing the 10.8.5 supplemental update, but now I can't restart my iMac at all. It keeps trying to reinstall the update, and then shuts down. I can restart from the recovery HD, but I can't reinstall the previous software as it says that both of my disks are locked, the main HD and the recovery HD. I tried disk repair, but it says the main HD can't be repaired. Is there any way to unlock the disks? Any other options? Thanks.

    You will have to do internet recovery OS X: About OS X Recovery
    or Mountain Lion Recovery disk assistant  OS X Recovery Disk Assistant v1.0
    If you have a third party utility like disk warrior or techtool  DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
    they might be able to fix your drive, but this is unlikely.
    If you can get the drive repaired and you are still game for the update, I'd use the combo installer instead. A lot of people have had problems with the supplemental installer. I just used the combo installer the other day for a problem I was having with iTunes, worked like a charm. OS X Mountain Lion Update v10.8.5 (Combo)
    If the recovery partition will let you, you might have to erase the drive and reinstall ML and reinstall your documents from backups, which I hope you have.
    If it won't let you, and DW or TT or Disk Utility won't fix or erase your drive, then the drive has probably failed, and you'll have to replace it.

  • IMac-27inch model (late 2012) running slow after Mountain Lion 10.8.5 supplemental update

    I have the iMac 27-inch (late 2012 model), 8GB RAM, 1TB Hard Drive.  All of a sudden after the Mountain Lion 10.8.5 Supplemental update it started running like molasses (apps take forever to open, takes forever to wake out of sleep, long boot up times, etc.)  I ran verify disk, verify disk permissions, etc.  I found that when I ran verify disk permissions, it stated that the iTunes permissions weren't right so I repaired disk permissions, reboot, still same problem.  Ran verify disk permissions again, once again iTunes permissions issues, repair disk permissions, restart, same problem over and over again like Ground Hog Day, please help...

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post.  I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

  • 10.6.8 Supplemental update -- Freeze

    I let software update install this supplemental update today, after ensuring that my time machine backup had completed.  After the restart, it seemed to launch ok until the desktop appeared with larger/rearranged icons, and a huge dock appeared (usually hidden and containing many more items).  Activity Monitor launched (login item) and began updating.... then stopped. 
    At that point, I could move the pointer with the mouse, but it was otherwise unresponsive. I've seen similar behavior with 2 bad video boards in past, but there weren't any screen glitches.  It would boot in safe mode, but all my usual finder/keyboard/mouse preferences were reset to those of a new install.  Any attempt to reboot led to a similar hang shortly after launch.  (< 30 sec). 
    I undid the changes, reverting to a complete restore from this AM's time machine backup.  While it is back to functioning as it was before the update, I appear to have lost anything in my user folder that was changed since the last restart some time ago.  This is a feature of file vault, I presume. 
    Does anyone else long for the days when Apple Computer sold computers, rather than lifestyle? 

    Same problem here, but i don't have time machine running so cannot back out the update.  Hope Apple fixes this soon.

  • Update crashes, .dmg files don't work, etc

    OK... So I've cleared up a significant amount of memory, roughly 10GB. I've run Disk Utility a few times and still having problems.
    Software Update Crashes and reads:
    Date/Time: 2006-09-25 09:55:33.350 -0700
    OS Version: 10.4.7 (Build 8J135)
    Report Version: 4
    Command: Software Update
    Path: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
    Parent: WindowServer [74]
    Version: 2.0.3 (2.0.4)
    Build Version: 197
    Project Name: SoftwareUpdate
    Source Version: 1350000
    PID: 305
    Thread: Unknown
    Link (dyld) error:
    Symbol not found: __ZN3KJS9ObjectImpC2Eb
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
    Model: PowerBook5,4, BootROM 4.8.6f0, 1 processors, PowerPC G4 (1.1), 1.33 GHz, 1 GB
    Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 64 MB
    Memory Module: SODIMM0/J25LOWER, 512 MB, DDR SDRAM, PC2700U-25330
    Memory Module: SODIMM1/J25UPPER, 512 MB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
    Modem: Jump, , V.92, Version 1.0,
    Bluetooth: Version 1.7.3f4, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITACD-RW CW-8123,
    Parallel ATA Device: TOSHIBA MK6025GAS, 55.89 GB
    USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
    USB Device: USB Device, , Up to 12 Mb/sec, 500 mA
    Safari crashes and reads:
    Date/Time: 2006-09-25 09:56:06.845 -0700
    OS Version: 10.4.7 (Build 8J135)
    Report Version: 4
    Command: Safari
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Parent: WindowServer [74]
    Version: 2.0.4 (419.3)
    Build Version: 1
    Project Name: WebBrowser
    Source Version: 4190300
    PID: 313
    Thread: Unknown
    Link (dyld) error:
    Symbol not found: __ZN3KJS9ObjectImpC2Eb
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
    Model: PowerBook5,4, BootROM 4.8.6f0, 1 processors, PowerPC G4 (1.1), 1.33 GHz, 1 GB
    Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 64 MB
    Memory Module: SODIMM0/J25LOWER, 512 MB, DDR SDRAM, PC2700U-25330
    Memory Module: SODIMM1/J25UPPER, 512 MB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
    Modem: Jump, , V.92, Version 1.0,
    Bluetooth: Version 1.7.3f4, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITACD-RW CW-8123,
    Parallel ATA Device: TOSHIBA MK6025GAS, 55.89 GB
    USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
    USB Device: USB Device, , Up to 12 Mb/sec, 500 mA
    To top it all off, I can open an Internet Explorer Browser, attempt to download updates, or programs for reinstallation but when I try and open the .dmg files it tells me that the device not cofigured.
    I have NO external drives hooked up. I AM connected to power.
    Any help?

    You seem to have found the thread that is used for this:
    http://forums.adobe.com/message/5744088#5744088
    Closing this one for now.
    thanks,
    Ignacio

  • Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?

    Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?
    Thank you.

    I found the answer just after posted this.  Thanks to a user named CloudWalker.  Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.

  • ? OSX 10.6.8 V1.1 update vs. 10.6.8 update& Supplemental Update

    Hi,
    I did the Combo 10.6.8 update, followed by the 10.6.8 Supplemental Update (small file around 10MB if I am correct) I saw
    ? on  same date posted 7-25-11 10.6.8 V 1.1 Update posted in software downloads in support,(&  and I believe  I saw both  a Combo and Client
    Version option for OSX 10.6.8 V1.1  ) By chance and ? dumb question ..
    Is the 10.6.8 V1.1 update ,(perhaps) a combination of either the Combo 10.6.8 update + the 10.6.8 supplemental update
    and/ or the Client 10.6.8 update and Supplemental  10.6.8 update ?
    s > I did the updates and checked the Software Updates (via the Apple Icon ) and checked a few days apart again
    the 10.6.8 V1.1 never appeared as a update,
    Do I need to download or attempt to download the 10.6.8 v1.1 update (Combo or Client) from Support>Downloads>
    Thank You
    diamondblues

    Fortuny,
    Stefen,
    Thank You for Your reply, I certainly appreciate it !
    I marked Your answer as Correct Answer,
    Take Care
    David
    diamondblues

  • Adobe Updater Crashing enough already

    I have seen this in the past in CS2 and now see it in CS3 where if I launch Updater 5 for CS3 from Adobe Utilities or if I run Check for Updates from any of the applications the Updater crashes.
    This is really annoying because it pops up every time I launch the apps too.
    The current problem is happening on a fresh archive install of Leopard, and a fresh Adobe CS3 design standard install.
    Console shows this every time the updater runs:
    11/14/07 12:05:23 PM [0x0-0x2f02f]."com.Adobe.ESD.AdobeUpdaterApplication"[538] terminate called after throwing an instance of 'std::runtime_error'
    11/14/07 12:05:23 PM [0x0-0x2f02f]."com.Adobe.ESD.AdobeUpdaterApplication"[538] what(): Unable to determine registration filepath!
    11/14/07 12:05:29 PM com.apple.launchd[120] ([0x0-0x2f02f]."com.Adobe.ESD.AdobeUpdaterApplication"[538]) Exited abnormally: Abort trap
    I have tried from different user accounts, from Root, and I tried in the past on another machine with the same issue in CS2. I also tried in Safe Boot.
    Any help or insight would be appreciated and no I shouldn't have to do a complete erase and reinstall of everything.

    I am getting crashes as well, but the symptoms may be a bit different. Updater runs for a while before crashing. Lots of disk activity. It appears to be running away doing memory allocations from looking at the crash trace.
    My system is 10.5.1 and Photoshop CS3.
    Process: Adobe Updater [3478]
    Path: /Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app/Contents/MacOS/Adobe Updater
    Identifier: "com.Adobe.ESD.AdobeUpdaterApplication"
    Version: Adobe Updater 5.1.0.1082 (5.1.0.1082)
    Code Type: X86 (Native)
    Parent Process: launchd [98]
    Date/Time: 2007-12-03 09:58:20.334 -0800
    OS Version: Mac OS X 10.5.1 (9B18)
    Report Version: 6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000014
    Crashed Thread: 0
    Thread 0 Crashed:
    0 com.apple.CoreFoundation 0x9288a516 _CFStringCreateWithFormatAndArgumentsAux + 70
    1 com.apple.Foundation 0x92573b26 -[NSPlaceholderString initWithFormat:locale:arguments:] + 86
    2 com.apple.Foundation 0x92573ab8 +[NSString stringWithFormat:] + 88
    3 com.apple.CoreFoundation 0x928dd1ee __raiseError + 206
    4 libobjc.A.dylib 0x91cf109b objc_exception_throw + 40
    5 com.apple.Foundation 0x926c43e8 _NSOutOfMemoryErrorHandler + 72
    6 com.apple.CoreFoundation 0x9287f281 __CFStringChangeSizeMultiple + 1985
    7 com.apple.CoreFoundation 0x928880a7 CFStringAppend + 231
    8 com.apple.CoreFoundation 0x92888de3 _CFStringAppendFormatAndArgumentsAux + 2899
    9 com.apple.CoreFoundation 0x9288a548 _CFStringCreateWithFormatAndArgumentsAux + 120
    10 com.apple.Foundation 0x92573b26 -[NSPlaceholderString initWithFormat:locale:arguments:] + 86
    11 com.apple.Foundation 0x92573ab8 +[NSString stringWithFormat:] + 88
    12 com.apple.CoreFoundation 0x928dd1ee __raiseError + 206
    13 libobjc.A.dylib 0x91cf109b objc_exception_throw + 40
    14 com.apple.CoreFoundation 0x92863b0c CFRunLoopRunSpecific + 4380
    15 com.apple.CoreFoundation 0x92863d38 CFRunLoopRunInMode + 88
    16 com.apple.HIToolbox 0x921688a4 RunCurrentEventLoopInMode + 283
    17 com.apple.HIToolbox 0x921686bd ReceiveNextEventCommon + 374
    18 com.apple.HIToolbox 0x922abf9b ReceiveNextEvent + 58
    19 ...SD.AdobeUpdaterApplication" 0x0010a817 0x1000 + 1087511
    20 ...SD.AdobeUpdaterApplication" 0x000068f3 0x1000 + 22771
    21 ...SD.AdobeUpdaterApplication" 0x0000be86 0x1000 + 44678
    22 ...SD.AdobeUpdaterApplication" 0x000214b6 0x1000 + 132278
    23 ...SD.AdobeUpdaterApplication" 0x00022284 0x1000 + 135812
    24 ...SD.AdobeUpdaterApplication" 0x000261cd 0x1000 + 152013
    25 ...SD.AdobeUpdaterApplication" 0x000139c0 0x1000 + 76224
    26 ...SD.AdobeUpdaterApplication" 0x00002912 0x1000 + 6418
    27 ...SD.AdobeUpdaterApplication" 0x0000282d 0x1000 + 6189

  • Notebook does not start after BIOS Update crash

    Hi all,
    I just want to ask whether is a chance to reactivate my Satellite A300 after a BISO update crash without send it to the Toshiba service.
    I downloaded the new BISO and started it from the Windows menu. After a few seconds my PC crashed and everything was frozen.
    I switched off the PC.
    Now when I press the power button to start the Notebook the monitor is black and I can hear a sound brrr, brrr, brrr from the CD-Rom drive.
    Do you think it is possible to boot from a CD or something like that. Is it possible to reactivate my notebook?
    Your help would be really appreciated!
    Thanks a lot
    Best regards,
    Chotte

    Sorry but if the BIOS chip is damaged there is no much you can do about it. You must contact authorized Toshiba service provider.

  • The new flash player update crashes internet explorer and firefox

    The new flash player update crashes internet explorer and firefox, please send a new release to fix the problem ASAP!

    ok   here's more mystery.  i just uninstalled and reinstalled flash player using the adobe uninstaller and rebooting after each step.  aqlso installed latest java.  i started looking at videos and here are the ones that worked: you tube
                                                                                           imdb
                                                                                           hulu
                                                                                           ebaumsworld
                                      here are the ones that didn't work:    yahoo
                                                                                           msn
                                                                                           reuters
                                    here are the ones that partially worked: the blaze (works on videos that originate from you tube, but not from news stories)
                                                                                              bing (work on videos from their video section - entertainment type, but not from news videos)
    the common thing here seems to be that news type videos crash and entertainment type don't.  also videos seem more likely to crash on internet portals like yahoo

  • 64GB+ RAM support: OS X v10.8.2 Supplemental Update 1.0

    OS X v10.8.2 Supplemental Update 1.0, a minor software update bringing a handful of fixes to the latest version of OS X Mountain Lion. 
    The OS X v10.8.2 Supplemental Update is recommended for all users running OS X Mountain Lion v10.8.2 and includes the following fixes:
    - Resolves an issue that may cause certain Japanese characters to appear incorrectly in Mail
    - Allows Safari to access secure sites when parental controls are enabled
    - Addresses an issue that may prevent systems with more than 64 GB of RAM from starting up
    Not on http://support.apple.com/downloads/ yet.

    The supplemental update did address the 'slow' Time Machine backups under 10.7.5 - if this is your first backup, and depending on how much data you are backing up, I would guess that it could take 6-9 hours, but certainly not 2 (or 99) days. If it seems that the backup is 'hung' just stop it, reformat the external drive, and try again. For some great Time Machine troubleshooting tips, see http://pondini.org/TM/Troubleshooting.html.
    Good luck,
    Clinton

Maybe you are looking for

  • Change a file into a folder.

    Hey, I recently got a new macbook air. I transfered some files from my old macbook to the new one via bluetooth. the folder which I had copied was automatically copied to the "Downloads" folder on the new mac, where a folder by the same name resides.

  • Help! Trying to understand overloading.

    I keep getting the following compile error when attempting to compile the following code. If I swap the f(String s) with the f(float f) method it works but I don't understand why. Can anyone help this newbie? MyClass.java:23: reference to f is ambigu

  • Grayscale images too dark in InDesign

    Hello everyone, Whenever I place a grayscale image in my InDesign (CS 3) document, it looks far too dark (compared to what I want and what I prepared in Photoshop). These are the specs of the images: tif, 300 dpi, grayscale, 15% dot gain profile. I'v

  • Trouble printing

    I have an all-in-one printer, scanner & copier - Model PSC`1315V - I can scan, print a test page - make a copy of document but cannot print anything from the computer - either on notebook word  or print out an E-mail - when i write a document and pre

  • Re:regarding delete adjacent

    hi friends, again with the same program. everyone is telling me that the program is already sorted by col1. but here key field is col2. if u look at col2 up to sixth row all are sorted except seventh row . but still it is taking it as correct one . p