10.8.3 not working with Epson printer

I have a 2009 iMac, 27 inch, 10.8.3, and an Epson XP 601 all-in-one (Asian version of the XP600)
I cannot print in DRAFT or ECONOMY mode.
I think this began when I upgraged to 10.8.3.
Epson has been giving me suggestions for the past 3 days, but none of that works.
Does anybody out there have the same printer and or same problem?
Thanks.

the computer balked and said it was not a legit, apple approved program.
That is a new security feature in Mountain Lion and will do it with anything not from MAS; you can either change the settings in System Preferences permanently or make a one-time exception by hitting Control key while opening the installer/app - that will override the security for one time only.
And yes, restarting works wonders in most cases. FWIW, it took me several hours to get my Epson recognized in 10.8.3 (was working fine in 10.8.2 and suddenly quit after updating) - I never did figure out exactly what finally fixed it; I did delete/add mine half a dozen times.

Similar Messages

Borderless Printing Does Not Work With Epson Printer!!!!!!!!

I have never gotten Aperture to print correctly borderless on Epson. I have an RX580 all-in-one. I set aperture up correctly in the print setup, I have tried everything and it always has a white strip on one side. I am getting fed up - any help would be appreciated. I am tired of exporting my images and then opening up in Photoshop to print - what a pain.

I've gotten it to print to my Epson RX700 very reliably. There are several things to be aware of. First, when selecting the printer settings, make sure the paper selection is correct. If you choose matte instead of glossy premium, for example, the print will be off-center. Next, make sure the size of the paper is set correctly in the printer settings, e.g. 4x6 borderless. Once you've finished setting up the printer, in the print dialog, also make sure you have the right paper size set up (why do we need to do this in two places?) and make sure it's configured to print on the whole page, not the whole photo. Finally, there's a slider that controls the border all around the photo. Slide it all the way left until it's at zero. That should get you a nice borderless print.
Oh, one other thing, always double-check the printer settings before making your first print. After shutting down Aperture, the next time it seems to forget my last settings. Subsequent prints should print out properly without changing settings again.
I've never needed to use the calibrate button. If you make sure the paper type and size are set properly in print settings as well as in the print dialog, and borders are at zero, you should be set to go.

Elements 11 will not work with Epson r2000 printer

Cannot make Elements 11 work with new Epson r2000 printer, works with all other applications. Epson tech support could not fix, said problems was with Elements 11. After making all settings including having Phtoshop manage color and turning off color management in printer, receive Photoshop prompt stating "printer is not compatible or printer settings are not correct. Need help, thank you.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is there a download for Mavericks to work with Epson printer using EFI Fiery 4.5Xpress?

Working with OS 10.9.1, we've purchased the Fiery 4.5 Xpress software for the Epson Stylus Pro 4900, when trying to send a PDF to the printer, I keep getting a "Not supported" error. Is there a patch to fix this incompatibility?

Not from Apple. It would have to come from Epson. Consult their tech support.

Airprint not working with HP printer after updating to IOS5

Hi,
I have an HP airprint printer (photosmart B210) that worked fine with my ipad2 and iphone 4 all running ios 4.
Now I have a iphone 4s as well as the iphone 4 and ipad. After upgrading to ios 5, I can no longer airprint from any of my ios devices.
I have tried turing everything off anf back on (including time capsule router, printer, ios devices).
I can see the printer from ios but the job just sits waiting to print. I have managed to print one document after trying multiple times.
Anyone having this issue?
Thanks

BattleAngelita,
Welcome to the HP Forum.
The fact that the SimplePass program is asking your for your Master Windows Password means the program survived the upgrade process to Windows 8.1 -- sort of.
You may want to start with the following:
Create a Restore Point >> Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Check to see is SimplePass has sorted itself.
==========================================================================
You may want to try to Update your SimplePass program to the latest version in the version 6.x series.
Before you do that, read and follow the instructions to Export your Webcards to your .tsd file. Regardless of whether the website logins are working right now; you do need this backup in case you lose your HP SimplePass program (through complete removal / reinstallation or though corruption).
Next, consider updating the HP SimplePass program to the latest of the version 6 series. If you are already running the latest version, consider the other options in the guide, including the "Repair SimplePass" procedure.
Open the file > Click on Download > Click “Open in Adobe Reader”
Simple Instructions to Upgrade HP SimplePass
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

IMac not working with wireless printer

I have purchased an iMac running OS X mavericks 10.0.2 along with an HP 4260 printer. I can now print from my iPhone 4S and iPad mini but not from the iMac unless I have the USB plugged in. It just keeps telling me that it can't find my device. Help

Hi maxskingsley,
If you are still unable to print from your iMac, the first thing to check wouId be that the printer and the iMac are on the same network.
Now if both devices are on the same network, next I would suggest an uninstall, and reinstall of the software for the printer. To start, I have included the document 'Uninstalling the Printer Software' http://bit.ly/1amRotF. Please click on your operating system, and follow through the steps.
When the software is uninstalled, you will need to reset the printing system of your Mac. I have included the document 'OS X Mavericks: Reset the printing system' http://bit.ly/1bS2qrh. At this point you do not have to re-add the printer. After resetting the print system on the Mac, the next step will be to complete a verify and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions' http://bit.ly/1bjFnnP. For step 3, the disk that you do want to select is the hard drive. One the repair of the disk permissions is complete, please restart your Mac.
At this point you will need to reinstall the software for your printer. I have included a link to download the 'HP Officejet 4620 e-All-in-One Printer series Full Feature Software and Drivers - OS X 10.9 Mavericks' http://bit.ly/1lC0Orf. After the download has completed, please open the software, and follow through the on screen instruction for installing the printer.
The last step will be to make sure that you have all the latest updates from Apple. Please click on the Apple icon, and then Software Update. Please install all available updates.
Now please try to print from the iMac. Are you able to print successfully?
Regards.
I work on behalf of HP

Verizon FIOS router Actiontec MI424WR not working with bonjour printing

Running OS X ver 10.9.3. Have a HPLaserJetP1102w. Just upgraded my Verizon FIOS router to Actiontec MI424WR Rev. I. Now my Mac can no longer find the printer wirelessly (it does, however, work thru USB). I see others have had this problem- and apparently some have solved it by changing settings on the router- but those settings options do not appear under 'advanced' for me. Verizon technical support, including the version one must pay for- was totally and utterly unable to help. Any suggestions for how to rescue this? Was all working perfectly with older Verizon router.

>It's amazing to me that talkting to 4 or 5 Verizon Tech's, they all say "This is new to me, I've never heard of this." Ugh...
I've had EXACTLY the same experience. Phone support and the techs who come to my home apparently have no idea this has been happening for months and months. Clearly, this issue hasn't filtered down from the network engineers to support.

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

HP C6180 not responding with wireless print from Mac OS X 10.9

My Printer does not work with wireless printing from my Macbook Air OS X 10.9
I tried all the normal stuff I can find.
The text that is there is: The Printer is not responding.

Hi XavierMaassen,
I understand you have a Photosmart C6180 that you're having issues using in Mac 10.9. I'm sorry to hear this has been happening, but I will certainly do my best to assist you.
I'm wondering how you installed the printer. If you had it installed prior to upgrading to 10.9 that could be part of the problem. There are currently no HP drivers available for this printer for 10.9, so you need to uninstall the HP software and install the printer via the Apple updates. Once you do that you should be able to print normally and scan using 3 different methods.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

Did you try removing the printer from the queue and then reinstalling it?
I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
I opened System Preference > Print & Scan and deleted the printer.
I then added the printer back and it now working again. Worth a shoot first I should think.
Much easier the a downgrade.
Allan

HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer. I have been using Windows Vista, but recently upgraded to Windows 8.1. I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1. I have attempted to find a driver upgrade for the B500, but there does not appear to be one available. I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one.
Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

Hi @Raider83,
Welcome to the HP Forums!
I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode. It is not guaranteed to work, but it is worth a try!
If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Macbook pro is not working with Canon pixma iP1500, but has previously. The printer works with an old PC without trouble. "printer is offline" message when this printer is plugged into macbook. Any clues to get it to work?

Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

10.8.3 not working with Epson printer

Similar Messages

Maybe you are looking for