10.8.4 - Motion 5 - Completely Erratic OSC Controls

HI...
In creating FCPx Templates I have always (Prior to 10.8.4) any Plug with OSC-Controls to control other parameters like Position, via Link.
I have used this routine since the dawn of FCPx.
Now with this latest version of OS X Mountain Lion - Motion has become useless. I can open the old templates and use them and the OSC controls act as they should. But creating any new ones makes the experience highly erratic.
After linkage - When moving the OSC just an inch it will fly off the screen by about 40000 (fourty thousand) pixels. And there is no way of fixing this.
I am linking the exact same way that I did the past years. And now this.
If anyone has any idea why this is happening all of a sudden, I would REALLY like to know...
Thanks

Make sure the Group that the OSCs are in are 2D with Fixed Resolution. If this is the problem, then also make sure that once you set Fixed Resolution, that you also go back and reset the Center position of the OSC and temporarily turn off the Link parameters for the object under control and reset its position as well. Then turn the Link param behaviors back on.
Also make sure that the OSC or the Group containing the OSCs are the full duration of the project (Inspector > Properties > Timing) or the OSC will not work (or even show up) in FCPX.

Similar Messages

  • Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.

    Logic 10.1 for a specific project; there is no mixer and the display is completely erratic.  For other projects it's working for now.  Please help

    Try this Safari5.1 from the installer package
    http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
    The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link,  it took about 4 minutes to download on my test.

  • I am using my ipad 2 ( bought in USA)  for about 3 years. 2 weeks back the touch gesture was completely out of control and the screen  was jumping automatically to so many applications. I attempted to get original settings through settings menu, but unfor

    I am using my ipad 2 ( bought in USA)  for about 3  years. 2 weeks back the touch gesture was completely out of control and  the screen  was jumping automatically to so many applications. I  attempted to get original settings through settings  menu, but unfortunately while resuming when I typed a pass code the  touch gesture , without control it  typed unknown passcode and while  confirming the passcode as well same thing happened.
    Now my Iapd2 is disabled and itunes also not recognizing my ipad.
    I kindly request you to help me to fix the issue. 

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • How to use "Configure Motion Completion Criteria"

    I am trying to direcly create a feedback loop on a servo using Flexmotion VI's.
    I have configured the axis to look at a specific ADC input as primary feedback, but cannot find a way to tell it the goal voltage or when the move has :"completed".  The configure "Motion Completion Criteria" permits me to set a deadband around a specified value, but I cannot find how to load that desired value into the feedback path.  Is there a way to link this?
    Thanks!

    I have read through the document and things follow fairly easily with the exception of the last page.
    [The name of "Target Poistion", "Velocity, and "Accel/Decel" in MAX and LabView will have different meanings depending on the type of analog feedback used.]
    I understand if a velocity or acceleration sensor is used, the meanings of "Velocity", "Position", etc. change.  The next page gives an example of loading target value.  It describes a velocity sensor linked to what seems to be the ADC channels. 
    How does the controller distinguish between velocity and acceleration with a voltage -digital bit signal?  I feel as though I am perhaps misreading or misinterpreting something.  It seems that the ADC channels would not be able to distinguish one sensor from another if all it was given was a voltage source.  For my application, I wish to feedback a voltage signal corresponding to load (from load sensors).  I therefore have no idea what configuration that corresponds to (I feel inclined to guess position, is that correct?). 
    Next question,  If I can relate load to digital bit values, and use that as target value feedback, will the displacement values also be returned?  Do I configure those as secondary feedback?
    I am sorry to be such a bother, but I am new with this setup.

  • How do I use NI-Motion tools to directly control a P70360?

    I can currently control a P70360 via modbus commands. I am interested in using NI-Motion routines to do this, if possible. But all the examples and VIs seem to assume there is an intermediary controller card, between the AC Drive and my labview app. I don't need a controller card, I have labview... so, does NI-Motion support direct communication with a P70360?

    Well, never mind. I spoke with NI this morning, and NI-Motion only supports calls to their 73x0 motion controler cards. Silly me for thinking there might have been a ModBus instrument driver deleveloped for the P70360. I'll get back to Dannaher (manufacturer of the AC Drive), and work to tweak my ModBus routines. The problem we're having is it gets out of synch, without sending an error due to stall detection.

  • Tutorial Announcement :: How To Use Auto Complete Text Form Control ::

    Hello Everyone...
    Here in this tutorial we gonna to learn a new and amazing feature of (ADDT), we will learn how to use Adobe developer toolbox (ADDT) form controls.
    Form controls help you to add a fantastic features to your forms, that helps you to expand the form abilities and functionality...
    The Auto complete Text Field is an enhanced text field that dynamically completes what you type with matched values from a table. You can also select the values from a list.
    You can use the Auto complete Text Field in user registration forms, such as allowing users to select their country or city easier, Also in other forms that needs the user to pick one of many choices without any difficulties.
    Requirements
    To complete this tutorial you will need to install the following software and files:
    Adobe Dreamweaver Cs3
    Adobe Developer Toolbox (ADDT)
    Don't forget: to try out the Demo type the first three letters :A - B - C
    :: Go To Tutorials ::
    :: Go To Tutorials ::
    Best Regards
    Waleed Barakat
    Developer-Online Creator and programmer
    http://www.developer-online.com

    Heya Waleed,
    I use spry to create an autocomplete form that works great across browsers that have javascript enabled. You can store info in a database and parse the info to xml for a dynamic approach. Take a look at the filter examples in spry.
    http://labs.adobe.com/technologies/spry/samples/data_region/NonDestructiveFilterSample.htm l
    http://labs.adobe.com/technologies/spry/samples/data_region/ZuggestSample.html

  • Erratic HP Control Zone Behaviour

    I Recently purchased the laptop about 3 Weeks ago, and I began to notice the Synaptic HP Control Zone mouse would behave erraticly after some time. A reset of the device driver seems to fix it but the problem returns again when some time passes.
    Everything seems to be upto date and the Control zone works with multitouch and normal use but this unsual and erratic behaviour that occurs quite often has become quite irritating. I've resorted to disabling the Control Zone and I am currently using an external wireless mice I purchased with the laptop.
    Driver:
    HP Control Zone - V18.1.7.8
    A video of the issue
    http://youtu.be/a8iXk0Wyjv0
    Any help would be greatly Appreciated

    I recently bought an HP Envy as well and I have multitutde of problems with the Control Zone.  The only solution is whenever it happens I have to use the touchscreen to get to "HP Control Zone Settings" and do a "Reset Devices".
    Has anyone found a permanent fix for this?
    -- Amal

  • Erratic date control / bug in LabVIEW?

    System: LabVIEW 6.0.2, Windows 2000 or NT4, Norwegian or Danish regional settings (have not tested others).
    I have an application (made and built in LabVIEW 6.0.2) where a numeric control with time format is used to select a date...This works fine on 90% of the PCs it is run on...however on some the numeric control has a will on its own...when you enter 10.05.2001 it changes its value to 05.10.2001...and reverse...if you enter 2002 it might change to 2020..11.03 might be changed to 01.03 etc. There is no code writing to a local of the control or anything like that ...the problem seems to be a bug with the control itself.
    I have tried to figure out what could cause this...and it seems that if you choose the date format to be s
    ystem date you can turn on the problem...This could make sense if the control did not accept too high month numbers in the day input and then to tried to guess the intended input switched the two around...but that is not the case...
    Now - is there some regional option or other that can be adjusted to get rid of this...or do I have too build the application again with the control set to use custom format?
    MTO

    Sorry, I guess I didn't understand the problem correctly. It seems that if you enter the date in a format that is different then what LV is expecting then it tries to fit it the best it can. For example on my computer if I enter the year in 4 digits (2002) and its expecting 2 digits LV will just cut off the last two leaving 20 (obviously not what I wanted). I'm not sure why it would change a valid date that you typed in though, maybe you did find a bug. I would try to narrow the problem down by seeing if the problem is linked to certain regional settings that are set on the problem pc and not on the ones it works on. Sorry I can't be of more help.
    Brian

  • My mouse/trackpad are completely out of control. The cursor/arrow is flying all over the screen and closing/opening windows. What is the solution to this? Downloading windows for Mac?

    So far I'm dissapointed with Mac O/S .....so many areas lack common sense, require unnessary extra clicks and is not as customizable as Windows. It's like Apple thinks you are a child and not entitled to choose for yourself so that they can control your info for you.
    The mouse/trackpad problem is a major issue that Apple should be proactive in offering a solution for. If anyone has a solution to this I'd be greateful to hear it.
    Thanks, 

    Is this the first time you're using a Mac?
    If so the learning curve is somewhat steep - but, if you put in the time and use this knowledge base whenever you run into issues you'll be up to speed soon enough.
    With regards to the trackpad/mouse, you can adjust the sensitivity by:
    1. Click the Apple Logo on the top left hard corner of your screen
    2. Click System Preferences
    3. Click Trackpad
    Adjust the tracking speed to your specifications.
    Also familiarise yourself with the gestures (activate the ones you can remember)
    To go back to the menue by clicking Show All
    4. Click Mouse
    Adjust your mouse settings to your specification.
    And why use mac?
    It just works...
    (most of the time ;p)

  • ITunes 10.5.2 is writing a lot of temp.tmp files and using up many gigabytes of disk space! It seems as if it is completely out of control!

    iTunes 10.5.2 on my macbook pro is writing a lot of temp(number).tmp files to my iTunes folder and not erasing them later!  As a result it quickly uses up many gigabytes of hard disk space. It uses up 8 to 10 gigabytes in just a few days.  I have been using iTunes since its inception, and only had this occur in the past few weeks.  My iTunes library is large with 3187 albums, and is 425 GB in size. My iTunes library is located on remote hard disk and accessed from my wifi network.  I have had such a setup for many years without any problems. Any help would be appreciated.

    iTunes 10.5.2 on my macbook pro is writing a lot of temp(number).tmp files to my iTunes folder and not erasing them later!
    Usually, that indicates that something is interfering with read/writes to the iTunes library files. Do you have security software (or realtime backup utilities) installed that might be scanning the locations on the computer where the iTunes library files are stored?

  • Using the write on effect and motion sketch - how to cross T's and dot i's

    I'm trying to use motion sketch and write on to create a signature (using the position values from Motion Sketch layer to control the position of paint brush on Write On layer).
    What's the best way to cross the letter T or dot an i?
    With motion sketch, as soon as you release the mouse button, things are terminated.
    If I simply restart the motion sketch capture to cross my t, the horizontal line happens at the beginning (time 0), even if I advance the playhead /CTI to the appropriate spot (after rest of word drawn).
    Is the best workaround simply to repeat the process on fresh layers to complete any discontiguous strokes and then manually position those in the timeline?
    Not a big deal if I just want a re-usable signature.  But if I wanted to use this on longer writing samples more routinely, it could get a bit cumbersome.
    Thanks for any suggestions.

    When animating a person's signature, I use masks to define a path, then apply the Write-On effect: one instance of Write-On for each contiguous piece of writing.  This means that at natural pen lift points, there's a new instance of Write-On.
    Animating real signatures takes some doing because it's not an automatic process at all, but it's worth doing in the end.

  • Pan Tilt Control

    Hi,I have Creative WebCam Live! Motion, would like to control Pan/Tilt/Zoom. Although there is a software for Manually changing the position of the camera and also an automatic image tracking, I would like to change its pan/tilt/zoom in my application: 1-Is there any especial file on the CD for that2-How can I use it3-Is there any refrence to del with this issue?Best reards

    uhh.. now I discovered something else!
    Very interesting!! The camera was pointed up, on the ceiling that is completely white without nothing (no chandeliers, no decorations...) and I try to move (Once again ) the camera by browser (the pan/tilt "arrows" button) from a remote PC (via Internet), and I see that the camera is very FAST!! Yes, The camera quickly reacts to my imput, about only 1 second of "delay" after my imput (really incredible!). So.... I thought that probably when i lowered the camera lens (to the coloured wall, to all other things that have different shapes and colours), the delay could increase, infact it was happened precisely this!!!! When I lowered the camera lens (with the "down arrow" button in the browser) from the ceiling so colours and shapes began to see and the white colour (of the ceiling) decreased, the camera movements began to slow (about 6/7 seconds of delay from my imput), and when the camera lens was completely in the walls level (so the white ceiling has completely disappeared), with many colours, many shapes (as the books, the chairs, colored walls, and many other things) the camera behaved as unfortunately I know, that is: terribly slow, with a really big delay (it moved the lens about 20/30 seconds after my imput), and for finally in beauty: IT TURN-OFF and RESTART by itself (wow!).
    So, what does this mean? I think that the camera unable to process many data as many colors and shapes. But if it is so, I think that only (and maybe few others) my model is damaged, cause I won't believe that Linksys (Cisco) has released all WVC210 Cameras with this problem!!! So now I immediately contact my seller to change this  piece then I will keep you informed about my story.
    Thanks, Mrarj.
    Message Edited by Mrarj on 05-09-2009 02:40 AM
    Message Edited by Mrarj on 05-09-2009 02:41 AM

  • Waiting for Task Completion from multiple users

    iam using Weblogic8.1 Integration BPM to design a worklist application. I need
    to create a number of Tasks(number know only at runtime), assign to users and
    wait for the completion of each of these task. I've tried using the Task Control
    factory to accomplish this. But iam not able to hold the process instance execution
    till each of these task is completed. The control gets released from the TaskControlFactory_onTaskCompleted
    as soon as one of the above created task is completed.
    Pls. let me know if there is a way to achieve this.
    Regards
    Raja V.

    Try to put the onTaskCompleted Control Receive in a loop which counts how
    many of these
    callbacks have already arrived, and the loop exit condition would be that
    the count is equal
    to the number of the created tasks.
    Regards,
    Robert Varga
    "Raja V" <[email protected]> wrote in message
    news:3f423f82$[email protected]..
    >
    iam using Weblogic8.1 Integration BPM to design a worklist application. Ineed
    to create a number of Tasks(number know only at runtime), assign to usersand
    wait for the completion of each of these task. I've tried using the TaskControl
    factory to accomplish this. But iam not able to hold the process instanceexecution
    till each of these task is completed. The control gets released from theTaskControlFactory_onTaskCompleted
    as soon as one of the above created task is completed.
    Pls. let me know if there is a way to achieve this.
    Regards
    Raja V.

  • Erratic hyperlinks creation

    Windows XP - Word 2003 - Acrobat 8.1.0
    I routinely use Acrobat to concert Word documents in PDF, including hyperlinks to external PDF files; this used to work very well.
    However, this suddenly started to work in a completely erratic (non reproducible) manner. Sometimes links are created, sometimes not, sometimes only some links are created and some others not. The strange thing is that it stopped working properly without changing any option in my configuration.
    Did anyone notice a similar behavior?
    Can anyone help?
    Thanks for your help.
    Papageno

    Hi, does anyone have some clue about it ?

  • Hide The Table in Table-Control Dialogue Programming

    Hi all,
    How to hide the TABLE itself (not the columns only but the whole table completely) in table-control in dialog-programming.can any one please help me.....
    Regards,
    Biswajit

    Hi,
    use the screen table.
    delclare as a "table" for the  group properties of that table element.
      LOOP AT SCREEN.
    if screen-goupt1 = "table"
       if the pushbutton = 'HIDE'  
            screen-required = 0.                            
            screen-invsible   = 0.                         
            screen-input    = 0.                          
            MODIFY SCREEN.
       ELSEIF  the pushbutton = 'SHOW'
            screen-required = 0.                           
            screen-invsible  = 1.                            
            screen-input    = 0.                           
            MODIFY SCREEN.
         ENDIF.
    endif.
        ENDLOOP.
    it solves your problme.
    Thanks

Maybe you are looking for