10.8 client and 10.6 server email pop and imap problem
Hi Guys ,
My problem is 10.8 client and 10.6 server.
10.6 server have email server running (pop and imap), when i configure same email account (pop) on 10.7 machine and 10.8 machines , 10.7 machine works , but 10.8 pop does not working
let me explaing further :
when i use 10.8 mail application to setup pop mail account it does not connecting . But i used the same account to connect imap it connect on 10.8 machine.
the same mail account connect to another 10.7 machine with POP and IMAP for testing reason , it works with out any issues
POP server is running and this email account's users profile enable POP and IMAP mail settings.
thanks in advance.
Try checking the Authentication Type for the POP account. It is located in Mail > Preferences > Accounts > selected account > Advanced
10.8 tends to use Apple Token. I think you will need to use a type of MD5 Challenge-Response or Password.
Similar Messages
-
I am wanting to add my icloud email account to "Windows Live"....During the setup process I'm being asked for server type (POP or IMAP) and server address (Incoming and Outgoing) Where can I find this information?...The port boxes already have a number in them - 25 (outgoing) and 143 (incoming)..do I leave these the same??...also do I check the box "Requires a secure connection (SSL) for both incoming and outgoing???
iCloud Mail Server Settings
-
How do I Change my cox incoming mail server from pop to imap
I Have a macbook pro with OS X Yosemite. I want to change the incoming cox mail server from pop to imap. I did it on my ipad and iphone but I can't do it on the mac pro. Do I need to delete the existing account and do it as a new account or can I edit the server?
It depends on what Cox has set up. Usually, you need to create a new account using IMAP. You don't want to delete the POP accounts because all your old mail is stored on your computer. You'll want to import that using Mail's Import option.
-
Email Proxy server for POP -to- IMAP bridge
Hi Guys
I have an email client which can fetch mails from an IMAP server, POP is not supported by the client.
[I cant change my email client :-)). so no suggestions on that]
My problem is that i need to fetch Yahoo Mails into my email client And Yahoo supports only POP, no IMAP.
My action of plan is to setup a email proxy server in-between, like YPOPs.
[YPOPs fetches mails from yahoo on POP but doest not expose any IMAP interface].
My email proxy server will fetch mails from Yahoo Mail on POP and will expose an IMAP interface to my email client application.
My email client can connect to this email proxy server and fetch mails on IMAP.
I wanted to ask u guys, abt ur ideas. If any of u faced any similar problem?
And i want to know if Java Mailing API can help in this?
Please guys do share ur views at least. If im able to devise a working solution, definitely i'll share.
Thanks alotHi bshannon
No i havnt paid for Yahoo Plus. I know Yahoo doesnt give service to free accounts.
Yahoo server to be configured for Yahoo plus is - mail.plus.pop.yahoo.com
But using YPOPs or Zimbra i am able to even access my free accounts. To me It implies - that yahoo has kept some mail server open for free accounts too.
I tried mail.pop.yahoo.com - it doesnt works.
Actually i tried the fetchmail on linux. There the problem is:
1) That i have millions of yahoo accounts. In fetchmail i need to configure account details in .fetchmailconf and
moreover i dont know how much space i'll need on my server to dump the mails of millions of users.
2) In future my users might need to reply to the mails too, i.e. reversing the whole flow. fetchmail can only fetch mails. it cant send mails.
I dont know UW IMAP.. i'll check. Thx anyway :-) -
Mail 3.2, Gmail and iPhone POP and IMAP Problems
This is a Mail problem but I am pretty sure it has something to do with the iphone as well....
Here's the deal:
Up until a week ago I used this setup:
1. My gmail account has had pop and imap enabled for all mail and it kept the email on the server
2. My mail client on my MBP C2duo on Leopard 10.5.2 was setup to retrieve email from gmail using pop
3. My 1.1.1 iPhone was setup to retrieve email from gmail using pop as well
4. Gmail account was being also synchronised between MBP and iphone through the appropriate tab in itunes.
RESULT: mail would pop to both clients as new mail and I would have to mark it as read in each client. I like that cause there are certain messages I read on my MBP and some others on my iphone.
About a week ago I upgraded my iphone to 1.1.3 and that's when the problems started:
a) It appears that the iphone is now setup to gmail's IMAP by default. So I delete the account and create one manually to work as pop
1. So now I have an iphone setup to retrieve with pop.
2. My MAil client on the MBP is still set to pop
3. Gmail settings remain untouched
PROBLEM: Everything is setup as pop but acts as IMAP ?!!?!
Whichever client gets an email message first that message will not appear on the other client.
Basically if my iphone catches an emai while my MBP is asleep i'll never get it in my inbox on the MBP and vice versa
Please help me out... It's the first time an Apple product makes me feel like a good ol windows user again
FAILED SOLUTIONS:
1. I tried deleting the iphone account and creating it from scratch making sure it's setup correctly
2. I tried disabling IMAP from gmail's settings
3. I tried disabling and re-enabling pop from gmail's settings
4. I tried using gmail's recent mode that forces a download of all recent (30 days) mail
5. I have repaired permissions, rebooted etc etc
Nothing changed
I have now deleted the gmail account from the MBP, re-created it and await while it re-downloads al 6000 messages before I try re-creating the account on the iphone but sth tells me it wont change anything.
Sorry for the extreme length of this post. Any help would be appreciatedBut I'm not using IMAP. I never used IMAP and I do not want to use IMAP. The reason being that I know all about the problems you speak of.
I just can't get POP working as it did before the 1.1.3 update. It's really frustrating -
10.5.2 Mail cannot connect to intranet Linux mail Server. POP or IMAP
Does anyone have any suggestion ? Haven't been able to get MAIL to connect (either POP or IMAP) to the intranet email Server. If I Telnet the server on 192.168.1.1 110 or 192.168.1.1 143 I get instant connection, MAIL on the other hand just keeps on spinning. Connection Doctor has not helped either, after a few minutes I get red lights. Checked and rechecked all settings, deleted account and recreated account to no avail. Tried running Thunderbird with same settings and everything works fine ! The Linux email server is running Fedora 7 / Cyrus IMAP server. Runs both protocols (IMAP on port 143 and POP on port 110).
this post maybe fit your needs... they solved a similar problem
http://www.macosxhints.com/article.php?story=2007090423071517
hope this helps you! -
POP3 and IMAP problem for one user
Hi All,
One of my users has recently connected her iPhone4 to our GW7. We set her up just like numerous other of our users, and she is having some issues. When set up as IMAP using the default application on her iPhone, she can see all her folders and all her mail up to December 21, 2011, but nothing after that. If she asks to download more messages, it successfully shows earlier messages, but still nothing more recent than December. When set up as POP, she is able to download recent messages, but there are wide gaps in what she can see. Whole days are missing. I can send her a new message, and she can POP it right away, but messages that came in just hours before will not come over. None of our other users have any such issues--including at least one with the same iPhone.
The user swears that she has no other e-mail program POPing mail--and even if she did, I don't think it would explain the IMAP issue--but I may be wrong about that. This user does have an incredibly large online mail account--over 20,000 messages in her Mailbox folder alone. I have examined her POA indexes, and they show nothing un-indexed.
I have used my own phone (Droid Bionic) to connect to her GWise account and I see the same behavior from her account.
We are using GWIA 7.0.2, and I can see her phone making connections successfully. I see no errors, but I have not yet studied a Verbose display when she connects.
Any suggestions about how to proceed to troubleshoot this?
What could I do if I wanted to reset whatever information her account stores as to what messages have been POP'ed off or to reset whatever info about IMAP is maintained?
Thanks in advance,
Peter.On 1/12/2012 3:16 PM, pgsmick wrote:
>
> Many, or shall I say /imapreadlimit -10, thanks to you Michael.
> Preumably there is a reason for this limit, and I don't feel like caving
> in to pressure from users who refuse to clean out their mailboxes, but
> what are the specific downsides to raising the limit? And does this
> shed any light on the other issue with using the POP3 method?
>
> Again, you're a gem.
>
> Peter.
>
>
My understanding is as you raise it, the memory usage of the POA and the
CPU hit on the POA will increase. It's been explained to me that the
IMAP standard requires certain correlations and bufferings to made
between the different items, so the memory usage increases. (IMAP is
fairly complex, so I doubt I can explain it all since I doubt I
understand it all). For example IMAP requires synthetic UIDS to be
correct for all the items in the mailbox during the session. There is
room for improvement here, but it hasn't been a super-high priority is
what I was told just this past BrainShare. It will never be a completely
low memory "streaming" kind of solution though - a lot of state has to
be built and maintained during the IMAP session.
POP, I'm not sure about. I do know GW can get confused. Have her specify
her pop UserID differently. For example if her normal gwmailbox is
jsmith, have her try jsmith:v=2 .
Also see other whacky POP switches
you can set affect the date range, and #. The "v","l",and "t" are the
most important.
User ID Login Options
With POP3 clients, users can add the options listed in the table below
to the login name (GroupWise user ID) to control management of their
mailbox messages. If used, these options override the POP3 settings
assigned through the user’s class of service (see Section 47.1.2,
Creating a Class of Service).
Login options are appended to the user ID name with a colon character
(:) between the user ID name and the switches:
Syntax: user_ID:switch
Example: User1:v=1
You can combine options by stringing them together after the user ID and
the colon without any spaces between the options:
Syntax: user_ID:switch1switch2
Example: User1:v=1sdl=10
The syntax for the user ID options is not case sensitive. Login options
are not required. If you do not want to include any login options, just
enter the user ID name in the text box, or following the USER command if
you are using a Telnet application as your POP3 client.
Table 46-1 User ID Login Options
Option
Explanation
Example
v=number between 1-31
The v option defines the POP3 client’s view number. If multiple POP3
clients access the same GroupWise mailbox, each client must use a
different view number in order to see a fresh mailbox.
For example, if two POP3 clients access a mailbox and the first client
downloads the unread messages, the second client cannot download the
messages unless it is using a different view number than the first client.
If this option is not used, the default value is 1.
User_ID:v=1
d
The d option deletes the messages from the GroupWise mailbox after they
have been downloaded to the POP3 client.
User_ID:d
p
The p option purges the messages from the GroupWise mailbox after they
have been downloaded to the POP3 client.
User_ID:p
t=1-1000
The t option defines the download period, starting with the current day.
For example, if you specify 14, then only messages that are 14 days old
or newer are downloaded. If this option is not used, the default value
is 30 days.
User_ID:t=14
n
The n option downloads messages in RFC-822 format rather than the
default MIME format.
User_ID:N
m
The m option downloads messages in MIME format. This is the default.
User_ID:M
s
The s option presets the file size when the STAT command is executed. If
the user mailbox contains a lot of messages or large messages, it can
take a long time to calculate the file size. With this option, the STAT
command always reports an artificial file size of 1, which can save time.
User_ID:S
l=1-1000
The l option limits the number of messages to download for each POP3
session. For example, if you want to limit the number of messages to 10,
you enter l=10. If this option is not used, the default value is 100
messages. -
If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?
Your users can utilize Outlook no matter where your email is hosted at.
how will it be different for them
different from what? -
Can there be an FAQ created by which it gives information to the client on the order process. Example: Client make purchase over the phone:
1. Confirmation email sent to the client with the order number that Adobe Direct Sales or Customer Service has communicated to the client -->Example of the order confirmation email in the FAQ
2. Example of an official invoice that is sent to the client.Thanks for your reply Olivia.
I looked at the ActiveX Event Callback for Excel.vi and the subvi NewWorkbookCallback.vi in detail.
I have a few questions/observations about it:
1. The main program appears to open Excel so that LabVIEW is the ActiveX client and Excel is the ActiveX server. Is this correct?
2. When the user opens a new Excel workbook, LabVIEW fills some cells. Again LabVIEW is the client and Excel is the server. Is this correct?
I want to create a LabVIEW ActiveX server that receives and displays an array of booleans. Can anyone help me with this? -
We have a new exchange server 2013 installed but also has exchange 2007 up.
MX records are now pointing to the new exchange server, all were working ok after DNS records were changed but after the weekend it Outlook clients and OWA keeps on disconnecting and reconnecting from exchange.
Exchange 2013 CU6
Anybody else experienced the same?hi Jheycie,
can you please check if you have .local and .com (different internal and external domain)
almost similar thread.. it worked for me
http://social.technet.microsoft.com/Forums/office/en-US/cc7d2300-0e1f-499f-a8f1-97f84687b6cc/emails-stuck-in-outlook-have-to-restart-transport-service?forum=exchangesvrgeneral
http://social.technet.microsoft.com/Forums/office/en-US/9b9bf607-f882-4f73-a7b2-611ace3f3115/users-unable-to-connect-to-exchange-unless-they-close-and-reopen-outlook?forum=exchangesvrgeneral
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin -
IMAP push on native email client and dovecot
Hi.
I'm using nokia's email client (declined the agreement, so the client makes the connection) to connect to a dovecot IMAP server.
My question is, I'm using IMAP push and it works, but the client disconnects from the server (cca 5 min) and makes a traditional sync (if using freq. syncing). If I disable the freq. syncing, it just disconnects.
Best regards.My question is, I'm using IMAP push and it works, but the client disconnects from the server (cca 5 min) and makes a traditional sync (if using freq. syncing). If I disable the freq. syncing, it just disconnects.
It is quite simple: The native email client on e72 does not support IMAP idle / push IMAP.
(The client on my old E51 did though).
If you use Nokia Messaging and give Nokia the email account credentials there should be a push-like function but I did not test that.
I addition, there is no way to get the sent messages to the "sent messages" folder on the server, which makes the use of IMAP totally pointless.
Get another email client.
E72-1, product code 0586718, firmware 022.007 -
Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
ThanksHi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected] -
Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.SDear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath -
Connection between SDM client and server is broken
Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best RegardsHaving same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM -
Cannot login to network account (leopard client and server)
Up until now, I have used local accounts on my leopard server. I want to start experimenting with OD prior to implementing. I created a new user account in the /LDAPv3/127.0.0.1 domain, and have bound my leopard client to the server using directory utility. On the login screen, "Network Accounts Available" has a green button to the left of it. When I try and login to the server account, the login window just shakes. At first, I could enter the password and then it would prompt me for a new password. Trying to enter a new password would not allow me to login. I went back to server admin and disabled the "require new password" setting, (as well as the other good security policies)...
I have also reset the password in WGM, and made sure to disable all the security stuff there too...
Lastly, I have deleted the server in directory utility, rebooted, then added it back in, and rebooted again...
I still cannot login to the server account, the login screen just shakes
Does anyone have an idea of what settings and or logs I can check to try and narrow down what is going on?
Thanks in advance....to close out the thread, I have working dns on my network, but I did not have dns enabled on my server. I enabled the dns service and entered just the info for my server, then assigned my server and client to use the server's ip addy as the primary dns server. Next, I created the home directory.
Once both steps were done, I was able to log in from my client to my server based account...
FYI-I found a document on afp548.com called "leopard server: advanced setup, rsync backup and automated reporting" that walks you right thru the process...Here is the link, it's a very useful doc....
http://www.afp548.com/filemgmt_data/files/Leopard%20Server%20Quickstart%20Guide. pdf
thanks again boomboom_uk and woVi, your suggestions were spot on....
Maybe you are looking for
-
Rfc sender problem(sap r/3 -se37) 'alternativeServiceIdentifier: party/serv
Rfc sender problem: While executing the rfc in sap r/3 system It is showing abap run time errors are 'alternativeServiceIdentifier: party/service from channel configuration are not (i have taken hint from this weblog /people/michal.krawczyk2/b
-
Can't seen Faces on iPhoto, but can on ATV and iPod Touch!
So, this is very odd. I recently upgraded my Apple TV to the v3.0 software, and synced Faces across. It looks very similar to iPhoto (same cork board, for example), though I don't think the ATV has the actual Faces tech (no focussing on the face duri
-
I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud
-
Solaris v10 sparc jumpstart server on x86 solaris - can't find miniroot.
I am trying to setup a jumpstart install server on an x86 solaris v10 machine to do a sparc network install. I downloaded both the CD and DVD sparc v10 ISO's. When I mount the CD, the Solaris_10/Tools/Boot directory (miniroot system) is symlinked bac
-
Display persistence in UIInput
Hi, I have got a problem of data persistence in my UIInput (textfield, output,...). Here is a description more detailled: In page1, I have a textField and a button. the action f the button assigns the value of the textField to a property of the sessi