10.9.1 shows mulitple installs

Looking in the App Store, I show 10.9.1 five separate times in the "Updates Installed in the Last 30 Days" section.  However, 10.9.1 still shows up in the "Updates Available" section and I'm still showing 10.9 in "About this Mac".
No errors are displayed during the reboot cycle.
Have not yet tried direct download.
Anyone seeing similar issues?

Welcome to Apple Support Communities
Download and install OS X 10.9.1 from the Apple website > http://support.apple.com/kb/DL1707?viewlocale=en_US&locale=en_US
If it does not work, hold the Shift key while your computer is starting up to start up in safe mode, and run the OS X 10.9.1 installer again

Similar Messages

  • TS3074 im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    Try the following user tip:
    " ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

  • App Store consistently fails to update apps - but shows multiple installs

    The App Store app on my MBP running OS 10.9.2 consistently fails to install software updates, and shows multiple installations in the Updates "log". I've had to reinstall the OS to get to 10.9.2 after multiple failures (with corresponding entries in App Store Updates and incessant hanging at install), and had to troll around the Apple Support Communities to find a URL for Safari 7.0.3 after it also showed falsely as having updated.
    Anyone have an idea about what is going on?  Missing good old Software Update.

    Hi Eskimo Boy,
    I have he *EXACT* same issue. I even reinstalled Mavericks completely from scratch and tried TONS of other things.
    What I tried so far is (incomplete list):
    Set up new user and tried to update => failed.MAS consistently crashes when launched under the new user. => no solution but rather an additional problem => failed.
    Tried to update in safe mode => failed.
    Tried to reinstall Mavericks => failed.
    Tried to reinstall Mavericks and migrate all user data from Time Machine backup => failed.
    Tried PRAM reset => failed.
    Even tried the highly overrated check permissions => failed.
    Whatever I try, I just can't update iBooks from 1.0 to 1.0.1 and Safari from 7.0.2 to 7.0.3. If you have any solution, then please let me know.
    Cheers, Paul
    P.S.: APPLE! THIS DRIVES ME NUTS! IT DRIVES ME NUTS JUST AS MUCH AS YOUR LOCATION SERVICE NOT WORKING PROBLEM!

  • Itunes not working for windows 8.1 it shows that installation package could not be opened

    last night I have updated my windows 8 to 8.1.When I started to installed Itunes 11.1.5.5 it says that 'The installation package could not be opened.Verify that the package exists and that you can access it,or contact the application vendor to verify that it is a valid windows installer package.'I also downloaded Itunes multiple times but it shows the same.Please anyone help me Im in a real urgency.

    i've found something http://download.lenovo.com/lenovo/content/windows8-1/upgrade/ideapad/index_en.ht ml
    1. Model compatibility
    - Ideapad can only support the current preloaded hardware and software configuration. Therefore, depending on a specific configuration, it might not be recommended to upgrade your computer. That is because some hardware issues cannot be resolved currently. 
    It is not recommended to upgrade the following models to Windows® 8.1 because some VGA related issues cannot be solved by the vendor, currently.
    U310, U410, U510, U410 Touch, U310 Touch;
    Z500 Touch, Z500, Z400, Z400 Touch, Z380, Z480, Z580, Z485, Z585;
    S300, S400, S400u, S400 Touch, S405, S206, G485, G585, N480
    I should have read this before updating lol .... i hate my self right now lol

  • E65 3rd party apps not showing in installation sec...

    Just updated the firmware on my E65. Have installed some apps (HandyProfile, HandyAlarm, etc.) and they are listed as installed by the application manager but are not showing up in the Installation section. Any ideas?

    The reason is most propably that you had installed your application to phone memory and not to SD card memory. During update most part of the phone memory is erased and you can lost your installed applications. Solution is to download and reinstall those applications.

  • Safari doesn't show after installation

    Hi folks,
    I want to try the new safari 4. So I went to apple.com, downloaded the .dmg and installed the program as usual until it showed the usual message to be successfully completed. Thatafter I can only find the package and installation-drive to install it once more, but no safari among my applications or program/item to move there. I tried spotlight but it only shows some safari-stuff in some metadata-folders in some library-folders.
    Now already repeated the whole procedure, downloaded and installed it again, but nothing to work with.
    If anybody can help me with what is wrong I'd be really thankful.
    Kind regards to all helpers

    Hi ~Bee.
    Well the last Safari app I had was in the application folder, if that is what you mean. It worked out but didn't satisfy me completely, so I have been prefering Firefox so far and now want to give Safari another try. Safari had been removed and currently there has been no Safari app on my OSX. I even searched the trash bin, to see if there still is an app which now got updated - even though I can't really imagine. The only non-meta-data about safari is the .dmg, and it is still in the downloads-folder.
    Right now I searched my disk again and spotlight doesn't show anything new or different than in the first post above.

  • Successful installed application keeps showing on Installation Status tab as Installed in Software Center

    Hello everyone,
    As the title says; after I have deployed an application. It keep showing itself on Installation Status tab in software center as Installed. 
    Thank you all in advance.

    Hi,
    That means that it is installed, what is your issue with it? don't you wan't it to show up? then you can select that it should not show up in Software Center under User Experience on the deployment of the application.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • How do i show mulitple parameters in a header?

    Post Author: Annette
    CA Forum: Formula
    here is my delima...
    I have a parameter that asks for a certain resource unit id which is a number.
    So the user chooses #31 which has an abbreviation of ORA.
    or they can choose #53 which has an abbreviation of ORD-A.
    I have a formula that says:
    if {?resunitid} = 0 then   "ALL"else  {psmresunit.resunit_name}
    if they choose both I need for the header to say ORA & ORD-A but right now the only that prints is the first resourse unit that they pick.
    I tried combining that 'join' formula that i had been sent, but it keeps failing on me.
    Can anyone help me?
    so the parameter that the end user sees is a number, but what i need printed out on the header (which is that formula) needs to show both names and i can't figure it out..
    THANK-YOU

    Post Author: SKodidine
    CA Forum: Formula
    1. Create a subreport and link it on the parameter to the value in the table which would equate to {?resunitid} being linked to {psmresunit.resunit_code} .
    2. In the subreport, create a formula such as:
    stringvar x;if {?Pm-?resunitid} = {psmresunit.resunit_code} thenx := x + {psmresunit.resunit_name} & ", ";
    3. Place the above formula in the report footer of the subreport. Right click on it and then on format field and on the Common tab, check the box next to Can Grow.
    4. Place this subreport in the page header of the main report.

  • I can't install wmpfirefoxplugin at Firefox 4, It show "The installer has encountered an unexpected error installing theis package. This may indicate a problem with this package. The error code is 2755.

    The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.

    Although you're getting a different error message, perhaps try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • OS X 10.4.10 showing mulitple faults?

    Just powered up my iMac and desktop was set to randomly changing everycouple of seconds. Fixed using the system preferences. But the dock will not appear, I have tried using comand-option-D and system preferences window neither will work. Other problems are 1. can not bring up 'About this mac' 2. System will not shutdown or restart from menu I must use the power button and 3. I cannot use the side buttons on the mouse to switch between program on the desktop. I looked for viruses information but found no new information.
    Don

    According to Alsoft, the makers of Disk Warrior, this problem started with Quicktime 7.0.4. There is a fix that involves changing the name of an audio file inside the Disk Warrior package folder but Alsoft has advised me that they do not recommend this and instead recommend a downgrade of Quicktime to 7.0.3. Alsoft also says that the crash is harmless and that the disk directory is safely re-built before the crash.
    The fix (found on MacFixit.com) is to right-click on the Disk Warrior application icon and select Show Package Contents. From there open Contents and then Resources folder. In the Resources folder is a file named Complete.aiff (It's a sound file. If you double click it and you will here the "ting" that happens when Disk Warrior is finished. Change the name of this file to something like AlarmComplete.aiff. Next time you run Disk Warrior it will not crash after finishing. As I said, Alsoft said it's Quicktime 7.0.4 that's doing this. The fix does work. It's up to you if you want to try it.

  • Same Updates Keep Showing After Installation

    My App Store constantly shows tat there are 4 updates.  I click on the click on the icon, click on the update button, the machine restarts... and the same four updates are still pending.
    I have been trying to clear this for two days, so now the list of updates that have already been installed, shows the same update - same version number - numerous times.
    I also tried cntrl click to hide the updates that have already installed, and though the option to hide comes up, the updates remain visible.
    Thank you for the help,
    Denise

    I have the same trouble. The same updates showing up again and again. For Keynote, Pages and Numbers.
    Download takes half day.
    Installing completes.
    Few days later - same update showes up again.
    The three programms are blocked from usage as long as the "update" isn't complete.
    Painful experience for the Keynote 6.0 and 6.1/ Pages 5.0 and 5.1/ Numbers 3.0 and 3.1 Versions.

  • Engineer no show for installation ... "resourcing ...

     Ok, took a day off work for a BT Infinity appointment at 12th May between 8am and 1pm (Didcot area) ... no show.  After spending an hour on hold, was told that they will not be coming out due to resourcing issues.  Nice of them to tell me, and my ADSL gets turned off on the 16th.  Was promised a BT Wholesale call back ... no call.  Absolutely scandalous level of service BT ... usual abuse of their monopoly position.

    easy easy boys don't get upset by misleading advertising for selling offline products Infinity broadband alike

  • Flash Player 11 Shows sucessful installation, but does not work

    I have installed FLASH PLAYER 11 on a VISTA system using IE9.
    I get a sucessfull installation when it is finished installing. But I can not view any Videos. I get the message that  need to install the FLASH PLAYER to view the video.
    I have uninstalled and reinstalled the version as well as the 10.1 version with no sucess.
    When I look at the CONTROL PANEL I see the FLASH PLAYER symbol. But when I goto the Programs and Features to uninstall it I do not see anything in the SIZE box
    I also do not see the FLASH PLAYER 11 in any of the All Programs folders.
    I tried to follow all of the online trouble shooting procedures to no avail.

    some people are having issues with the adobe download page.  we ask that you download the uninstaller and  installer directly from the links from this page: http://forums.adobe.com/message/3952360
    run the uninstaller
    restart your machine
    run the installer
    if you have a 64-bit system, you will only need to download the 64-bit installer.   it will install 32-bit binaries also...

  • I am trying to install windows 7 on my macbook pro ......when i press install button it shows "windows installer disk not found"....though it is clearly visible in finder

    please help

    This is the Macbook Pro forum. You should try asking your Boot Camp related question in the Boot Camp forum where the Windows/Boot Camp gurus hang out.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Hard drive not identified during Installation. Disk Utility showing nothing in left side bar

    Some day before my Macbook pro shown the flashing question mark. I have tried to install thr OS Snow leopard using disc.
    When I started to install the OS, my start up disc ( Hard drive) is not showing for installation.
    I have gone through the Disk Utility to repair it, but in that  Hard drive is not showing in left side bar.
    Kindly suggest how can I recover my Hard drive to install the OS?

    That suggests that the drive is dead; if so, it needs to be replaced, and any data on it can only be recovered by a professional service, which can charge hundreds or thousands of dollars.
    (101654)

Maybe you are looking for