10.9.1 Update causing issue logging in

After I applied the update, the first time I logged in to each of the 10 accounts I have I am asked to log into iCloud again (which I skip). Sometimes, instead of seeing that prompt the screen has a gray and a black bar. If I hit Cmd-Q, the iCloud prompt appears (must be a graphics mode issue or something), but the beach ball is spinning and it never stops, force a hard reboot.
Once, I logged in to each of the 10 accounts, I won't get prompted again, but it was a pain...I had to reboot 4 times.
Apple needs to test more.

The update is not being installed.
Download 10.9.1 from the Apple website > http://support.apple.com/kb/DL1707?viewlocale=en_US&locale=en_US Then, restart your Mac and hold the Shift key while your Mac is starting up to start up in safe mode, and finally, install OS X 10.9.1 by running the installer you downloaded

Similar Messages

ITunes 11.4 update cause issue with AppleUSBEthernetHost.kext

Along with many others iMac users, the iTunes 11.4 update cause a window that informs that the system extension "/System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used.

Am on Snow Leopard and downloaded and installed the update to ITUNES yesterday - Itunes itself installed okay - but I did get the same system extension cannot be used.
I don't have any ethernet devices - so I checked the System/Library folder and the date on the file Is July 13, 2009.
My IPOD (probably now classic because of age) synced okay through USB port, and everything is working fine. As the update was to allow more devices to sync with ITUNES it may be the error message is not correct one.
Seriously - Apple needs to get out of Silicon valley - the message if correct is for techies - not for users who just want the software to update without problems. Lately Apple is preaching to their own choir.
I did send feedback through Itunes to Apple - -- If you are experiencing crashes after this update make sure you send the crash report to apple explaining that it is happening after this install -- also call or schedule a call with apple support --

Update caused issues

If this Kill-switch feature (another lovely thing brought to us by the flakes and nuts of california) is what's causing all this lag and trouble in my phone, where is the Opt-out panel as defined by the statute?
Subject Title edited to reflect new topic.

Yes...starting in the 10.3.1 rollouts, there have been many many folks reporting issues when using the automated "update" processes. Reloading the OS (via the "official" methods) has often cured their issues. Sometimes more is required, but that's the first step in trying to resolve issues caused by something potentially going wrong in the automatic update process.
Good luck and let us know!
PS... the poor OP on this thread, our discussion has gone far off track from that. I am going to ask the mods to split our discussion away from the OP. PPS...you also need to change your profile on this site...it still says "9530" as your device... Edit... Now that this is split out, I'll place some useful links to the recommended process. The official OS reload methods:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-OS/td-p/2187545#nobannerThe unofficial methods:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using-Autoloader/td-p/2466747#nobannerhttp://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/

Java 2013-003 Update causing issues

I own several Mac's; one Macbook and two iMacs, each with different versions of OS X and after installing the 2013-003 update I'm having major issues with Java. In fact since Apple decided they didn't want Java running on their OS's and in their browsers, I've had numerous problems.
Today I was forced to install the 2013-003 update and when I try to run a website I use which requires Java, all I'm seeing is this message:
Use the Software Update feature (available on the Apple menu) to check that you have the most up-to-date version of Java for your Mac.
Clearly I've updated to the latest version and I've even tried installing the most up to date version of Java from Oracle's website yet I'm still having the same issue. I love my Apple computers but I'm getting really sick of the constant Java issues.
Any ideas what's going on?
Thanks.

Would like to know the answer to this too.

Update causes issue with bluetooth

I just upgraded my S4 with the "update_SCH-I545_MI1_to_MJ7" patch and now bluetooth audio will not work properly. I have several bluetooth headphones and speakers and the issue affects all of them. I can connect and play one song if I start the song from the S4 and not through bluetooth controls. However after one song it stops working. I have to disconnect and reconnect to play a second song and then it breaks after that.
Obviously there is some bugs in this latest upgrade. Is this a known issue and if so when is a fix anticipated?

schreib1620, let's get rid of these bugs. Have you downloaded 3rd party applications to your device? Some application software can affect the performance of your device soon after a software update. I recommend that you uninstall any unwanted applcation, power your device off/on to soft reset it, and test the bluetooth feature again. Keep us posted.
Lasina_VZW
Follow us on Twitter @VZWSupport

Software update causing issues with text message

I updated to 10.2.1.3014 last night and since then my text messages are not showing up in my text message folder on the hub. They'll show up if I select Hub but not when I select Text Messages. Is there anyway I can fix this!?

Make sure your settings didn't get messed up. Go to your Hub and click the three dots in the lower right then follow Settings>Hub Management>Text Messages and make sure "Show in Both" is selected.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

MOVED: Re: 790FX-GD70 Bios update causing issues?

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=138682.0

>>Use the MSI HQ Forum USB flasher<<

Last night's update causing XML issues with MAC and MS Word

I am running Snow Leopard on a MAC. Last night Firefox installed an update, and the software I use for work no longer works with Firefox. I use a custom built web app that uses XML code to take web created info and compile into a Word document. Until this latest update, the issue had been when creating the Word doc, extra XML code was being written for images causing them to show as blank in the Word document. Now, the document is being created but not with a .doc extension. I had been in contact with Microsoft about the first problem with no resolution. They were able to duplicate the problem. The first problem only happens on a MAC and is not specific to operating system. This new problem is only happening with Firefox, not Safari, and started today after the last update.

HI,
If you post a crash report, perhaps we can help.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply here. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
You may have Safari third party plugins that were compatible with your previous version of Safari but not Safari 5.0.1. It's the responsibility of third party developers to update their software, not Apple.
Follow the instructions here. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
If indeed you had third party add-ons installed and Safari still crashes, then post a crash report.
Carolyn

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Libby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

Flash player Update causing layout issues in Adobe Reader

I did an updated to adobe flash player to version 15.0.0.239 and now the Adobe Reader XI (11.0.09) Layouts don't work, only file list mode.
Is there any way of fixing this? This new layout issue is going to cause issues since the whole appeal of using Acrobat Portfolios is the Presentation Layout views.
Please help
thanks!

I have found sometimes you need to run Adobe's Flash uninstaller, before running the installer.
Typically the first whole number of a version is usually a major upgrade, versus an update, and hence why the built-in update function fails to see the new version on many software.
As for "safe", clone backup in case there is a feature you don't like about the new version, so you can always run it like it was before.
https://discussions.apple.com/docs/DOC-1992
You don't know how Adobe might alter the overall PDF frameworks on the computer when the upgrade is completed. If you don't clone, you may find yourself stuck with whatever changes they make.

[svn] 1435: Delete fles-sdk-description. xml altogether as it is causing issues when syncing to the sdk.

Revision: 1435
Author: [email protected]
Date: 2008-04-28 13:39:06 -0700 (Mon, 28 Apr 2008)
Log Message:
Delete fles-sdk-description.xml altogether as it is causing issues when syncing to the sdk. Because it gets updated every time you build it also gets marked by svn as being out of sync and that is a pain too so... I opted to just create it on the fly and then update it and not have it checked in
Modified Paths:
flex/sdk/trunk/build.xml
Removed Paths:
flex/sdk/trunk/flex-sdk-description.xml

>>D:\GoldSun\Source Code\Flash\ExtentionTest\lib\Build>D:\SDKs\flex_sdk_4.5.1.21328\bin\adl -package -target ane DaveExtension.ane extension.xml -swc DaveExtension.swc -platform iPhone-ARM library.swf libDaveExtention.a
Either its a typo or by mistake you wrote adl in yout bat file. Change it to adt since that is the file that will package your ane. adl is just used for debugging/running on Desktop.
Hope this helps. let me know how it goes.
Thanks,
Meet

FSCM via WS-RM (without PI ) - Update termination issue

Hello experts .
We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
Details of the issue and steps followed so far.
Ideal Scenario :
Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
After receiving the query response the functionality of credit check happens while creating / changing the sales order .
Configuration steps followed in SOAMANAGER
We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
(This has been done to all the services query , notification that are relevant in our integration).
Current behavior / issue .
While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
How to overcome this update termination issue ?
When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI

Hi ,
Finally we are able to solve the update termination issue . But again we are using a work around .
Situation :
Once we executed the VA01 transaction we were getting update termination issue . After lots of debuggung we found that system was trying to get the Business system details ( Own business system data ) . The table lcrt_clntcache had no values.
Solution
We inserted appropriate values in the Table LCRT_CLNTCACH (business system data ) and now it works .This is a work around we got as of now.Credit checks are happening successfully and also integration is good .
(typically if we define business system in SLD (PI) , and run SLD_CHECK , this table gets populated , but in our case we are not using PI instead we are using WS-RM)
But now few questions arise .
a) Why do we need a business system in case we are not using PI ( typically we define business system and technical system in PI ) and instead using WS-RM ?
b) Is it a good practice to update the table ( as did in workaround above )?
c) Is this any bug and needs to be consulted with SAP ?
Please let me know your views .
Edited by: Vedula Adeep on Jan 16, 2012 8:42 AM

Recent Update causes my App to crash. What should I do?

Recent update causes my Adobe Revel App to crash. What can I do?

Are you using ios? Is your app crashing or not installing an update?
There is an issue that the Revel version 2.3.2 on iOS does not seem to install. We are working with Apple to resolve it as quickly as possible. We sincerely apologize for the inconvenience this is causing you. In the mean time, you can still access your photos on adoberevel.com from a browser and from our mac, win8, and android apps.
If you are using a different platform, please let us know the details.
Pattie

Details Data in SAP BI could not be updated completely: see log

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

10.9.1 Update causing issue logging in

Similar Messages

Maybe you are looking for