10.9.2 Mavericks and can no longer connect to our SMB file share on the network.

Smb was working under 10.9.1. Now  smb and usning the finder I get "connection failed".  Both of my NAS are not out when i am using my mac book pro  thru the wifi connection.    Is any one else have the same problem?

Same story here - smb:// worked under 10.9.1, but the Update 10.9.2 broke it.
Some facts:
Mac Book Pro Retina 2012
Network connection is over WLAN (The connection is very stable and no issues else where)
The issue seems to be caused when there are larger files (> 500MB) in the share
smb:// works for shares with lots of folders but only small files in them
smb:// and cifs:// are both almost unusable
smb://  shows a blank screen for ages- Finder will eventually hang up
cifs:// will connect fast (wow!), but the connection is very unstable for larger files
The funny part is, that Mavericks (pre 10.9.2) was the first OS X which fixed most SMB issues of its predecessor. (SMB2 was somwhat slow, but quite usable) Now, I can not really use my Mac to work...
Moral of the story, I think I will switch to Ubuntu 14 when it is released in April - it should support HDPI Displays.

Similar Messages

  • AD accounts can no longer connect to Lion AFP File Shares

    I am running into an issue where AD users can no longer connect to AFP file shares. If you attempt to authenticate with one of our Lion server's local accounts, you connect without any issues, but if you put network credentials in then you get the window shake denial. This issue just came up this morning. I attempted unbinding and rebinding the machine, updating from 10.7.2 to 10.7.3, removing and re-adding share point permissions, turning file sharing off then on, and still no network account authentication.
    Anyone have any advice for how to get network credential authentication to AFP filesharing working again?

    You could enable the AFP server access log:
    sudo serveradmin settings afp:activityLog=yes
    and then look at log at /Library/Logs/AppleFileService/AppleFileServiceAccess.log
    to see if that offers any clues.

  • Since upgrading to Mavericks, I can no longer see my Time Machine or printer on the network.

    I have uninstalled printer and re-installed drivers but no printer is showing when I click to + new printer.
    Also the TM can no longer be seen... Suggestions?
    Printer = Dell 1760NW
    Both the printer and the Time machine are showing 'green lights'
    thanks in advance

    Regarding the printer:
    From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
    If that does not help then from braden85:
    This first article is about changing or updating printer software in Mountain Lion, and can be found here:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622
    This next article tells you where to find the printer software for your specific printer brand:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669

  • I have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated

    i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
    i have also tried 4 different chargers both official apple and non official

    i have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means

  • I recently installed itunes update and can no longer connect to network nor internet

    I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.

    Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
    Good luck!

  • My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ?? Thank you.

    My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ??
    Thank you.
    Problem description:
    gray screen at startup and crashes
    EtreCheck version: 2.1.1 (104)
    Report generated 6 de dezembro de 2014 13:29:43 BRST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6750M - VRAM: 1024 MB
      Color LCD 1440 x 900
      Intel HD Graphics 3000 - VRAM: 384 MB
    System Software: ℹ️
      Mac OS X 10.6.8 (10K549) - Uptime: 0:31:56
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (698,64 GB)
      S.M.A.R.T. Status: Verified
      - (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 749.81 GB (378.70 GB free)
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple, Inc. MacBook Pro
    Problem System Launch Daemons: ℹ️
      [not loaded] org.samba.winbindd.plist [Support]
    Launch Agents: ℹ️
      [running] com.babylon.activation.plist [Support]
      [loaded] com.divx.dms.agent.plist [Support]
      [loaded] com.divx.update.agent.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.facebook.videochat.[redacted].plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [running] com.skype.c2c_service.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      FaceboxPro Aplicativo (/Applications/FaceboxPro.app)
      Safari Aplicativo (/Applications/Safari.app)
      Octoshape Aplicativo (/Users/[redacted]/Library/Octoshape/Octoshape.app)
      uTorrent UNKNOWN (missing value)
      Dropbox Aplicativo (/Applications/Dropbox.app)
      Inkscape UNKNOWN (missing value)
      RealPlayer Downloader Agent Aplicativo (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
      HP Product Research Aplicativo (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      OVSHelper: Version: 1.1 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      RealPlayer Plugin: Version: Unknown [Support]
      AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      DivX Web Player: Version: 3.1.1.9 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.6.6
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
      SharePointBrowserPlugin: Version: 14.1.2 [Support]
      AdobePDFViewer: Version: 10.1.12 [Support]
      JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    User internet Plug-ins: ℹ️
      npsf_uni: Version: sf 3.3.2.1 [Support]
      OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
    Safari Extensions: ℹ️
      Searchme Adware! [Remove]
      Skype Click to Call
      iSkyDeluxe
      TED HTML5 video playe
    Audio Plug-ins: ℹ️
      iSightAudio: Version: 7.6.6
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Skype Click to Call  [Support]
      Tuxera NTFS  [Support]
    Time Machine: ℹ️
      Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ℹ️
          5% WindowServer
          4% DivXMediaServer
          1% fontd
          0% RealPlayer Downloader Agent
          0% WebProcess
    Top Processes by Memory: ℹ️
      296 MB WebProcess
      202 MB FaceboxPro
      185 MB Microsoft PowerPoint
      163 MB Safari
      137 MB Microsoft Word
    Virtual Memory Information: ℹ️
      843 MB Free RAM
      1.76 GB Active RAM
      706 MB Inactive RAM
      978 MB Wired RAM
      577 MB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 6, 2014, 12:58:24 PM Self test - passed
      Dec 6, 2014, 12:23:11 PM Kernel_2014-12-06-122311_MacBook-Pro-de-...panic [Details]
      Dec 6, 2014, 07:08:28 AM PluginProcess_2014-12-06-070828_MacBook-...crash
      Dec 5, 2014, 05:24:39 PM WebProcess_2014-12-05-172439_MacBook-Pro...crash
      Dec 5, 2014, 10:45:59 AM Kernel_2014-12-05-104559_MacBook-Pro-de-...panic [Details]
      Dec 5, 2014, 10:18:14 AM Kernel_2014-12-05-101814_MacBook-Pro-de-...panic [Details]
      Dec 3, 2014, 08:28:35 PM locationd_2014-12-03-202835_localhost.crash
      Dec 5, 2014, 10:25:44 AM Kernel_2014-12-05-102544_MacBook-Pro-de-...panic [Details]

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • I am using Dreamweaver CS4  and can no longer connect to Device Central - Can you help me with this?

    I am using Dreamweaver CS4  and can no longer connect to Device Central - Can you help me with this?

    Device Central was discontinued April 23, 2012.
    http://www.adobe.com/products/devicecentral.html
    And replaced with Adobe Edge Inspect CC (for Cloud subscribers)
    http://html.adobe.com/edge/inspect/
    Nancy O.

  • I have a uk iTunes account but have moved to the Netherlands and can no longer connect to the iStore from my iPad. Do I need to update my iTunes account to a Dutch one?

    I have a uk iTunes account but have moved to the Netherlands and can no longer connect or make purchases. Do I need to change my account to a Dutch one?

    You can't transfer any content from one account to another account (nor can accounts be merged) - all content will remain tied to the account that downloaded it.
    Do you not have copies of all of your downloads e.g. on your computer or backup of your downloads/library ? Whilst you are in Australia you can't redownload your UK purchases (you have to be in a country to use its store), if you have them on your computer's iTunes library then you should be able to stream them from it to your Apple TV

  • I just upgraded to Yosemite and can no longer connect to the WIFI  any suggestions

    I Just up upgraded to Yosemite and can no longer connect to internet - any ideas?

    I have the same problem after loading OS X 10.10 Yosemite on my MacBook Pro (Late 2008).  Wi-Fi (Time Capsule) connects OK, then I open Safari and it waits for a minute and then gives me a message that it can't load the page because I'm not connected to the Internet.  The Wi-Fi is fine.  When I run the network analysis, it shows that everything is fine up to the Internet; the dots are red after that.  I have another MacBook Pro (Retina, Mid 2012) and it loaded and runs with no known problems (so far).  I am writing this message on the Late 2008 MacBook Pro, so you can see that there is no problem with the Internet connection.  It is a Yosemite problem.  My iPhone and newer MacBook Pro connect with no problem.  I loaded Yosemite TWICE, then ran the Disk Utility and fixed some disk permissions but there were no other problems identified.  Restarting after reloading Yosemite and the same problem is there.  Restarted after running the disk utility and fixing disk permissions and it still can't connect to the Internet.  Same problem.  Does anyone have an idea how this might be fixed?  What's going on?  Thanks for your help.
    Update:  Air Drop also doesn't work.  Thanks.

  • I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

    I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

    Are there any previous networks that you have used that have the same password as Molly?  YES
    Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
    Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
    Delete any other networks that you no longer need so that your Mac will search for networks more quickly
    Click OK, then click Apply
    Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
    Then look for any old networks that might have used the name Molly in the past and do the same for them.
    Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
    Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
    and then click KeyChain First Aid
    Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
    Quit Keychain Access
    Power down the entire network...all devices...order is not important
    Power up the modem first, then your main router, the other devices one at a time
    Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

  • Disconnect Device through Hotspot and can no longer connect

    I recently disconnected a Windows 7 device through the "Connected Devices" option on the Verizon Hotspot. After disconnecting that Windows 7 device I am no longer able to connect through the Verizon Hotspot. I have removed and added back the hotspot profile in Windows 7 and can still not connect.  I can still however, connect to other devices on the Verizon hotspot.  I receive a simple error message in  Windows 7 to verify the encryption settings even those encryption settings are properly set to WPA2.  It appears that both devices appear to be out of synch.  Has anyone experienced this with other Verizon 4G LTE hotspots?  I generally just disconnect the device or turn off the hotspot when disconnecting however, I did not see any hard whatsoever in disconnecting the device through the hotspot "Connected Devices" option.  Any help would be greatly appreciated as I need to get one of my business laptops that use Windows 7 back online..

    If it's encryption Windows 7 is speaking of, make sure in the wireless adapter settings configuration that not only is on the correct WPA2 as you stated but the encryption matches, such as AES or TKIP.
    Otherwise, removing the connection from the Preferred Wireless Networks list and resetting the device should allow a fresh new start.

  • Just updated KIES and can no longer connect my laptop and S4?

    I've been using KIES for a year.  Was just prompted to update it.  Did so (to version 2.6.0.13091.9) and now I can no longer connect my laptop and Galaxy S4.
    I'm getting the following message which is, of course, nearly worthless:
         Reconnect the device in Samsung Kies (PC Studio) mode.
         Current connection mode not supported by Kies.
         Check the USB settings.
         (Settings -> Applications -> Development -> USB debugging (x))
    1) "PC Studio" has no actual meaning; after searching online I found what they're trying to tell me is the phone must be in MTP mode rather than USB debugging mode.
    2) The Settings path above is wrong; I DID manage to find the proper path to turn off debugging & switch to MTP, but that doesn't help.
    3) uninstalled & reinstalled KIES; no help
    Any ideas? 
    I know 1000's of other people are having this problem, so I'm a bit surprised VZ doesn't have a ready answer here.

        Hey there mjr123,
    I am sorry to hear that you are having issues with the Samsung Kies software.  This is actually a third party application offered through Samsung, so I would recommend reaching out to Samsung's support team for the best assistance.
    NicholasB_VZW
    Follow us on Twitter @VZWSupport

  • Downloaded iOS 5.1 and can no longer connect to any encrypted Wifi?

    I just downloaded the latest iOS and did a full factory reset on my iTouch in hopes of getting it ready to go to a co-worker. I've been test-driving the device to see if we wanted to use Apple vs Android products for the applications we're developing for our research facility. Things were going fairly smoothly until I did this. Now, I no longer have access to any encrypted network (I have access to 2), which essentially has given me a nice paperweight I can give to my co-worker (we deal with HIPAA information that has to be encrypted). It does have access to guest networks, so I know it's a software problem (not a hardware problem). I tried calling Apple, but we're outside our 90-day limit. I thought they were known for their excellent support, but if I have to pay for fixing something their update broke (sounds like a great way to make money if you ask me), I won't be recommending it for our software development.
    Anyone aware of any settings I need to dig-into to get this to work? (I feel like my hands are tied because I can't poke around in any of the directories to browse through files and settings; something I'm not afraid to do as a software developer.)

    I've tried the following:
    * Settings | General | Reset | Reset Network Settings (Twice)
    * Settings | General | Reset | Reset All Settings (Once)
    * Plugging it in and doing a "Restore" through iTunes (that's how I downloaded iOS 5.1.1 in the first place)
    All the passcodes and restrictions are are turned off.
    When I first try to connect to the network, I'm prompted to enter my username and password (I've elected to "forget" the network a few times so I can get this screen again). If I enter it wrong, then I just get an error that I'm not connected. When I enter it right, I get a warning that the certificate is "not verified". When I click on "More Details", I can see all the information that got pulled from the network (Issuer Name, Signature Algorithm, Public Key Algorithm, Key Usage, etc.). When I choose to "Accept", I get the little icon indicating that it's trying to connect...this never goes away (I let it run for an hour).
    The encryption type on the main Wifi I'm trying to connect to says it's RSA (I'm guessing it's WEP though...I didn't set it up, our IT group did that).

  • Upgraded to extreme and can no longer connect to xbox live

    My old airport express died so yesterday I bought an airport extreme to replace it. I had no problems setting it up, my powerbook and powermac connect to the internet just fine. My ps3, wii, and apple tv all connect fine. However I lost the ability to connect to xbox live with my xbox360. Running the "Test Xbox Live Connection" test shows that it passes all the tests and is connected to the internet until it reaches the xbox live test where it fails. According to xbox support there are no current outages or problems with my account.
    Since the only thing which has recently changed is the upgrade from airport express to an extreme it seems like that is likely the problem. I thought it might be a NAT or port thing but in the airport setup utility there are no options for changing either NAT or port settings.
    Any ideas anyone? It looks like a year ago when the extreme came out there were problems between it and the xbox, but it also looks like they were resolved. Also they caused the xbox not to be able to connect to the network at all, which mine can do.
    Thanks very much for any ideas or help. Otherwise the extreme is going to have to go back.

    That's a drag.
    I wish I could be more help, but I can not think of what the problem would be. I have mine connected to a network that bridges two AEBS to allow for a large area WIFI. I have no problems with either of the 360's connected. I have no special port forwarding or any settings changed to get the connection.
    I also know that since I just replaced my main base station for an unrelated problem, that it worked out of the box both times.
    I would say try direct connecting it. (the xbox) Not necessarily to correct the problem, but to isolate the AEBS as the problem. I would also try shutting down anything else that may be connecting so you only have a connection with your xbox. Again, none of this will probably solve your issue.... but you can get in contact with customer care or visit a genius bar.
    In my experience if you can give detailed results to test you have already performed to trouble shoot, they are very receptive to replacing your product. Isolating the AEBS and saying you know t will connect direct, and that even when it is the only device connected.... it fails. I would also try both wireless and wired if you have both options.
    I know it is not the optimal answer.... probably a pain.... but sometimes things just work kinda goofy. I know the stuff works and works great when it does... but I have had my share of issues with apple hardware. The good news is they have never failed me when it comes to taking care of it.
    Good Luck !!!
    Message was edited by: Dan Jay - Minneapolis

  • HT1695 i downloaded the IOS software upgrade and can no longer connect to any WiFi network, what can I do to fix this?

    I have attempted to reset the network settings, nothing changed.  The wireless router is working and has nothing wrong with it.  Ever since I downloaded the software update, WiFi connection can not happen and every time I try to do anything that uses the internet it directs me to the apple support site.  How can this be resolved?    

    I've tried the following:
    * Settings | General | Reset | Reset Network Settings (Twice)
    * Settings | General | Reset | Reset All Settings (Once)
    * Plugging it in and doing a "Restore" through iTunes (that's how I downloaded iOS 5.1.1 in the first place)
    All the passcodes and restrictions are are turned off.
    When I first try to connect to the network, I'm prompted to enter my username and password (I've elected to "forget" the network a few times so I can get this screen again). If I enter it wrong, then I just get an error that I'm not connected. When I enter it right, I get a warning that the certificate is "not verified". When I click on "More Details", I can see all the information that got pulled from the network (Issuer Name, Signature Algorithm, Public Key Algorithm, Key Usage, etc.). When I choose to "Accept", I get the little icon indicating that it's trying to connect...this never goes away (I let it run for an hour).
    The encryption type on the main Wifi I'm trying to connect to says it's RSA (I'm guessing it's WEP though...I didn't set it up, our IT group did that).

Maybe you are looking for