10.9.4 Mail activity shows incoming mail downloading but does not put in mailbox

Been testing all day with no results.
The hosting company says there is no problem at there end. All mail can be found the their webMail.
iMac Mail connection doctors show all good connections.
Mail activity shows incoming mail downloading but does not put in mailbox, they simply disappear.
Still searching for a fix for this serious issue. 
Any ideas or a proven solution is most welcome.
-Thanks in Advance -

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
and/or
Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages

Similar Messages

  • Mail activity show incoming mail, but no emails shows up.

    3days ago my emails stopped showing up, though I am still receiving them on my Ipad. My activity shows that emails are coming in, they just aren't showing up in my folder.  I have checked the connectivity Dr. And it shows green lights.  I am not offline.  I am out of my element so any suggestions need to be pretty specific.

    Care to share which OS & email client you are using? 

  • My ipod shows up in itunes, but does not show up on my pc as a drive

    my ipod show up in itunes - but does not show up on my pc as a drive
    cannot figure out why it now doesn't show up

    Maybe
    iOS: Unable to import photos to computer
    Did it show before?
    If you connect to another PC does the iPod show up in My Computer?
    Have you installed only camera or scanner programs on your computer?

  • How do I see a book which has been downloaded, but does not show in Adobe Reader XI?

    How do a find a ePub book in Adobe Reader XI, which has been downloaded and does not show up? janf76607913

    Visit:
    Adobe Digital Editions
    Be well...

  • Followed instructions but cannot change PDF to word - Showing doc has virus but does not

    Followed instructions but cannot change PDF to word - Showing doc has virus but does not

    Acrobat does not perform any virus checks. So, it appears that you are using one of Adobe's online subscription services.
    Use the link below to go to the Adobe Document Solutions page. Select the service you've subscribed to.
    Log in. Locate and use the "support" link. "Chat" is offered to service subscribers.
    Discussion of your issue with the service's support ought to see you through the issue.
    Be well...

  • Metric shows real time value but does not show historical data

    I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
    I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
    When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
    When I check metric value history,
    For all the columns like Last Known Value,
    Collection Time stamp,
    Average Value,
    High Value,
    Low Value
    it shows no data.It even does not show anything in Metric Value History graph.
    Even the metric test in Metric Extension works fine.
    All the client agents are uploading the the data to OEM successfully.
    Any help,guide is appreciated.

    bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

  • Firefox opens when I click on a hyperlink in an e-mail in my Outlook 2003 program, but does not go to the URL in the link. It used to work before I re-installed my MS XP Pro 64 bit OS. Help!

    At first, after I re-installed the OS, nothing would happen when I clicked on an e-mail hyperlink. So I went to Folder Options in Control Panel and associated Firefox with the E-mail file type. Firefox then opened when I clicked on a hyperlink in an e-mail, but just opens to the Firefox start page ("Blank page"). Firefox does not open the URL in the hyperlink. I need guidance as to how to restore this function which worked perfectly before I had to re-install the OS due to a corrupted program installer. I have run the MS Office Detect and Repair function twice--both times indicating that everything is fine--but it does not make a difference in fixing the Firefox function.
    NEW: An attempt to click on the link in Security Center to go to Microsoft Update brings up an error message that reads: "The requested lookup key was not found in any active activation context." I have no idea what this means, but I suspect it is related to the lack of ability to open Firefox to a link URL.
    See the uploaded screen print(JPEG) below.
    UPDATE: PROBLEM SOLVED!! Searched on error message on line, solution fixed problem. THANKS ANYWAY

    # Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
    # Sign back in, and you will be asked to save the password you entered.
    # This will save the password and autocomplete if you have this option turned on.
    I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

  • HT1694 Frozen Mail App Allows Mail Download But Does Not Open Mail

    Ok, i have the ipad 3 and i am not sue which ios 5 version i have but i nknow I am current on my updates.  Regardless, the mail app locks up after updating for mail.  It shows new mail, but when I click on the mail or any other buttons within the app nothing will occur.
    Basically the app just downloads new mail and freezes up.

    Try:
    - A reset. Nothing is lost
    Reset : Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Delete the account from the iPad and recreate the account
    - Restore to factory defaults/new iPad.
    BTW, you posted in the iPod touch forum.

  • I plug my iPod touch into my new macbook pro and the iPod icon shows up in iTunes, but does not show up anywhere in the finder or on my desktop...?

    I need to transfer the music off of my ipod onto my mac but i cannot do that when my macbook will not recognize my ipod touch in the finder.

    This is correct.  It will not show in finder.  It is not an external storage device.
    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Open itunes connect ipod, do not sync, click File>Transfer Purchases

  • HT201263 My iPod Touch shows the Apple logo but does not respond to holding the home and lock buttons or being plugged in. iTunes does not recognize it either

    I plugged my iPod into my computer to retore it and proceeded to do so as told. The only thing that happened after that was that the Apple logo keeps showing up and nothing else. My computer/iTunes no longer recognizes my iPod either.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a fat32 formatted drive (WD my passport 500GB) that is showing in disk utility but does not mount. I am using a macbook with mac osx 10.5.8.

    Disk warrior came highly recommended on other posts but because the drive is not mac os formatted it won't do its warrior magic...
    The drive shows in disk utility but the options to repair are greyed out. The drive ejects sometimes but not others. The drive powers up with light and I can hear noise (not loud just a hum that confirms (i think) that it is spinning.). The drive is as it cames and booted on both a windows XP pc and my macbook with mac os x 10.5.8.
    I have tried test disk but after running for a day with no other command prompts other than the first recommend I uninstalled it.
    Any other suggestions?

    Hi Christina,
    It's quite possible the AC PSU has given out, if It's only Bus powered as it appears, that's the worst idea ever & asking for eventual problems.
    What Format is it?
    Did you install any WD SW?
    Your best bet is DiskWarrio...
    http://www.alsoft.com/DiskWarrior/
    But others that may work…
    Drive Genius…
    http://www.prosofteng.com/products/drive_genius.php
    TechTool Pro…
    http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83

  • I am not able to download a charter toolbar it show up as being downloaded but does not appear on the homepage

    I have been trying to download a charter toolbar but it does not show up on the homepage along with the other toolbars. When I go to tools it does appear on the add on tab.

    How can I Add Extra Toolbars?
    https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars?#w_how-can-i-add-extra-toolbars
    Check and tell if its working.

  • Mail is asking for a password but does not recognized nput

    I currently have Road Runner Broadband services thru our local cable company. Until recently, my email was no problem. All of a sudden, I'm getting a pop up window requesting I enter my password. I have tried the original password used by the service provider, plus the one I changed it to... says it doesn't recognize the password. Called service provider and after about 30 minutes of diagnostics,to include verification of all settings originally installed as part of the cable service and provider says it is not an issue with the cable, its with the iMac... Any suggestions? Would the problem go away if I deleted the Road Runner software and reinstall it? Very frustrating.

    I'm having the SAME issue! It affects both a Gmail POP account and another POP account we have set up. Both accounts intermittently display the "lock" symbol, and even when the correct passwords are entered, they're not always successful in "unlocking" the mailbox :/ Sometimes it happens, sometimes it doesn't. The piece I felt I could add to this discussion was the Gmail piece...I find it hard to believe anything is wrong on the Gmail end of things so often. I can't think of any user-selectable setting that would fix an intermittent problem. Apple, if you're reading: bug fix? Please? And to the kind person who suggested a restart of the software cures the issue, I postulate: should we really need to do so? Again, I suggest: Apple, bug fix? Cheers from Boston.

  • I purchased a book on my iPad and it did not download it shows up in purchased and downloading but does not complete. How can I get my book my device is up to date and supports the book.

    I purchased a book today on my iPad it won't download it shows up in purchased and I have checked all my systems are up to date. 

    Close all open apps by double-tapping the home button, then swiping upward on the app window (not the smaller icon) off the screen.
    Then reset: hold down the home button along with the power button until you see the Apple, then let go.

  • PDF shows multiply-transparent jpgs, but does not print them

    Hi all, i have to print some store vouchers with different logos, but too bad some of them are jpgs. I've set them to "multiply" with 60% opacity, and when I export to PDF, it actually shows pages as it should, but when I print them, these logos magically don't appear. What the heck am I failing? Attached screens of my working profile. Thanks!

    While I think your boss is making a big mistake and sacrificing quality in the output, he is the boss. Make a new PDF preset -- start with X-1a, then change the standard to None and check the box to simulate overprint. Does that work? Do you see thin white lines (stitching) around transparent areas? That's a major problem on screen and with digital printing from flattened PDFs.

Maybe you are looking for

  • IIS service not showing when I use the get-exchangeCertificate | fl cmdlet

    Hello All, I just installed a 3rd party digital certificate to my Exchange 2010 via powershell then assigned the 4 services IIS, pop, smtp, imap but when I use the get-exchangecertificate | fl cmdlet the IIS service is not showing.The rest of the ser

  • Apple 20" vs Dell

    I'm looking to purchase a new monitor to replace this very, very old monitor (understand, any model will be an upgrade). I realize Apple Cinema Displays are top notch, but for the $$$$ I don't mind crossing over and considering a Dell. Does anyone ha

  • TOC from a Header

    TOC is a great addition over Appleworks. I use sections in my reports with differing Headers and footers for each section and put the title of the section in the Header. Then I can use a standard style in each section for topics etc. I'd thought I ca

  • Beginner to game programming

    hello everyone I am trying to write a he-man fighting game. I have just started and am pretty new to game devlopment, but thanks to java.sun I found the animation to walk. I used that code and edited for jumping and throwing a basic punch. my problem

  • [CRM 5.2] Component Creation

    Hi Gurus, we encountered a problem during creation of a new component in SAP CRM 5.2! we've created a new ZComponent and generated a new overview page in view node. then we associated two external views of another component in Component Usages in Run