10 band real time equalizer from mic to earphones

Hi. I would like to do script to do 10 band equalizer which would change sound from microphone dynamicly (in real time) and result play in earphones (also realtime) with small time lag.
Is that possible? Maybe some paid library? I would like to get 15 band EQ.
I found something like this:
http://www.blixtsystems.com/2008/05/simple-3-band-eq-with-flash-player-10/
but i don`t know how to scale it to get 10 or 15 bands.
Would it work on mobile air apps or only on desktop & flash apps?

I found something like this:
http://philippseifried.com/blog/2011/10/20/dynamic-audio-in-as3-part-3-robot-voice/
I would like to change it get EQ band corrector to set some bands (f.e. 10 different frequences in hearing range from 125Hz to 8000Hz) volume level up anddown.
Something like this:
band125hz.volume +=1;
band200hz.volume +=5;
band400hz.volume +=0;
band800hz.volume +=1;
I would like volume up and down by frequencies. This script after change should strengthen (boost) or weaken (cut) the energy of specific frequency bands as in this process:
http://en.wikipedia.org/wiki/Equalization

Similar Messages

Triggering Real time job from Batch jobs..

Can we trigger real time jobs from the batch jobs. As soon as batch job completes we need to start real time job automatically. Is this possible with BODI XI?

Greetings Post Originator,
This post is older than 60 days and there are no entries in the past 30 days. Based on the content discussed, it appears that you question has been answered. This message is being marked as answered and points are being assigned if available where possible.
Thank you for being an active participant in the SAP Forums,
Rob Siegele
Forum Moderator
SAP Americas

Problems with real-time extraction from generic datasource.

Hello,
I have a real-time extraction from generic datasoruce with numeric field as a delta pointer. I have created an initilization infopackage, delta IP and real-time IP, real-time data transfer process, real-time deamon. The problem is that real-time extraction does not see delta updates. Deamon creates requests in PSA every minute, but there are all empty. When i delete the deamon and shedule not real-time delta infopackage, it loads delta records correctly. Version of BI - 7.0 SP 18.
The second question: a cannot stop real-time deamon. I stop it in RSRDA, but when i try to shedule standart IP, i get an error, that deamon is still running. So i have to delete it and recreate.
And the 3rd question, theoretical. What real-time extraction is necessary for? As i understand, i can create a process chain that will be sheduled every 1 (5, 10, ...) minute. What are advantages of real-time extraction rather such variant?
Thanks.

Hi,
1.Note 1113610 - P17:SDL:PC:RDA:Daemon runs: Do not start delta/init IPackage
Summary
Symptom
When a daemon runs or is scheduled, you may not start a 'normal' delta/init InfoPackage.
Other terms
RDA, real-time data acquisition, daemon, InfoPackage, scheduler
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 7.0 BI
Import Support Package 17 for SAP NetWeaver 7.0 BI (BI Patch 17 or SAPKW70017) into your BI system. The Support Package is available when Note 1106569 "SAPBINews BI7.0 Support Package 17", which describes this Support Package in more detail, is released for customers.
**********you can apply the correction instructions provided in the note
2.i refered closing of the request in the target i.e DSO not psa.
3. Note 1000157 - RDA daemon does not get data from delta queue
Summary
Symptom
You use Real-time Data Acquisition (RDA) to load data from an SAP source system. After several hours or days, the system no longer reads the data from the delta queue. In the RDA monitor, you can see that the InfoPackage has been executed, however the data transfer process (DTP) has not been executed for a long time. In transaction RSA7 in the source system, you can see that there is already data in the delta queue.
Cheers,
swapna.G

How can I generate a real-time highchart from my database data?

I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database.
Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very similar to the
HighChart Demo which provides a real-time highchart with randomly generated values. It is also similar by X-axis and Y-axis, for I want my x-axis to be "Time" (I have a DateTime column in my database) and y-axis to be an integer (I have
a variable for that as well in my database).
Please I need help in sending the model data to my razor view.
Note that I am already using SignalR to display a realtime table. I also want to know if it can be used to automatically update the highchart as well.
Below is the code snippet of my script in the view. I have used the code provided in
HighChart Demo link for generating the highchart. Please tell me where should I apply the changes on my code.
@section Scripts{
<script src="~/Scripts/jquery.signalR-2.2.0.js"></script>

<script src="~/SignalR/Hubs"></script>
<script type="text/javascript">
$(document).ready(function () {
// Declare a proxy to reference the hub.
var notifications = $.connection.dataHub;
//debugger;
// Create a function that the hub can call to broadcast messages.
notifications.client.updateMessages = function () {
getAllMessages()
// Start the connection.
$.connection.hub.start().done(function () {
alert("connection started")
getAllMessages();
}).fail(function (e) {
alert(e);
//Highchart
Highcharts.setOptions({
global: {
useUTC: false
//Fill chart
$('#container').highcharts({
chart: {
type: 'spline',
animation: Highcharts.svg, // don't animate in old IE
marginRight: 10,
events: {
load: function () {
// set up the updating of the chart each second
var series = this.series[0];
setInterval(function () {
var x = (new Date()).getTime(), // current time
y = Math.random();
series.addPoint([x, y], true, true);
}, 1000);//300000
title: {
text: 'Live random data'
xAxis: {
type: 'datetime',
tickPixelInterval: 150
yAxis: {
title: {
text: 'Value'
plotLines: [{
value: 0,
width: 1,
color: '#808080'
tooltip: {
formatter: function () {
return '<b>' + this.series.name + '</b><br/>' +
Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', this.x) + '<br/>' +
Highcharts.numberFormat(this.y, 2);
legend: {
enabled: false
exporting: {
enabled: false
series: [{
name: 'Random data',
data: (function () {
// generate an array of random data
var data = [],
time = (new Date()).getTime(),
i;
for (i = -19; i <= 0; i += 1) {
data.push({
x: time + i * 1000,
y: Math.random()
return data;
function getAllMessages() {
var tbl = $('#messagesTable');
var data = @Html.Raw(JsonConvert.SerializeObject(this.Model))
$.ajax({
url: '/nurse/GetMessages',
data: {
id: data.id,
contentType: 'application/html ; charset:utf-8',
type: 'GET',
dataType: 'html'
}).success(function (result) {
tbl.empty().append(result);
$("#g_table").dataTable();
}).error(function (e) {
alert(e);
</script>

Hi Sihem,
Thank you for contacting National Instruments. Using the LabVIEW Real-Time module, you can do development without actually having a target. While viewing the project explorer window, you can do the following steps:
Right click on the project
Select New >> Targets and Devices
Select the "New Target or Device" radio button
Select the target you would like to develop on.Information about the LabVIEW Real-Time Module can be found here.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

How to get the real-time data from a CCD camera in labview?

I am going to setup a monitor system and need to acquire the intensity of each pixel at each second from a CCD camera. Also, I need to to some simple calculations with these real-time data at every moment to get my finanl output in this monitor system.
How may I do this using Labview?
Thank you very much.
Kai

We don't have special powers, so we can't guess if you have Imaq Vision or not, if your camera comes with a LabVIEW driver, if it has an USB interface, or firewire, or a dedicated NI card, if you just want to detect a move, or a change in intensity, etc...
So, try to be more specific with your question, that will helps a lot
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How to get real time date from Sunny Boy Inverters through SMA Webbox?

Hello,
I was looking on how to communicate with three Sunny Boy Inverters that are linked to a SMA webbox. Currently we get a daily summary of the solar production, but we would like to have real time data uploaded into LabVIEW. The people of SMA said that I needed to use "RS485 protocols" with a software they have called YASDI (http://www.sma.de/en/products/software/yasdi.html); however, I keep finding other information that says that I can communicate with my inverters using the SMA OPC server (http://www.sma-america.com/en_US/products/software/sma-opc-server.html). I also found this forum, http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/809129/highlight/true#M368718, where I understood that I don't need to use the OPC server, but instead I can use UDP communication to get the data. I found another forum that talks about using the YASDI :http://forums.ni.com/t5/LabVIEW/help-with-Sunny-Boy-inverter/m-p/293273/highlight/true#M153892.
I've tried to communicate with the people of the forums and I haven't gotten any responses; therefore, I wanted to see if I can get cleared up on this issue. Do I need to use OPC server to communicate with my inverters through the webbox or can I just use UDP in LabVIEW?
Any help would be greatly appreciated,
Thanks
Jose

Hello,
I got a response from Vincezo: http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/1794786. I'm currently working with the VI to communicate with the webbox through UDP. Since the PRC protocols to communicate with the webbox are in JavaScript Object Notation (JSON), I'm not sure if the data-in string has to be in JSON format. However, the only error I'm getting is 56 in the UDP read function. I've tried increasing the size of the bytes and timeout, but I keep getting this error. If anyone can help me with this part I would very grateful.
Thanks,
Jose

CRM 2007 - Real Time Quotations from ECC 6.0

Hi Gurus
We want to be able to generate Quotations in our CRM 2007 system.
The Master Data is maintained in ECC 6.0 for the products we wish to Quote on.
I think the terminology we're looking for is a real time quotation capability where by we pulled the required values from ECC 6.0 at the time of the quotation.
Is this possible?
What are the general steps required to do this?
We want to avoid delta loads of data from ECC 6.0 into CRM if this is at all possible.
Is this the right approach or should we consider Delta Loads?
Many Thanks in advance
Panduranga

Hello Panduranga,
Not as far as I know, but the following is a good starting point:
IMG: Customer Relationship Management => Transactions => Settings for Sales Transactions => Define Profile for ERP Sales Transactions
Kind regards,
Johan Wigert

Record Real Time output from a Audio Instrument to Audio Track

Hey,
Is there anyway to record in real-time the output of an Audio Instr?
I use a plugin that doesn't support automation, so I need to record the changes as they appear?
Any other solution?
D

Sound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower Sound FlowerSound Flower

HOW to update real time data from sap to other application?

We have two option of passing data from sap to other system.
1. web service
2. through idoc.
can anyone tell me advantages & disadv. of these two options.
Which scenario shd we use web service & idoc.
How is idoc triggerred.?
Is it only through user exit?
Kindly suggest any other ways for interacting with a 3rd party system which does not use a file.

Dear Libin,
IF you are using sap sytem as a sender then its better to use idoc's. Actually both systems (idoc and webservice) have there own advantages and disadvantages. Look up sdn for more info.
My personal choice would be idoc since with webservices you would need special tools like xml spy or altova and the skill to analyze and run those tools.,, its a little tedious..
Rgds
joel

Call web service from OBI dashboard to show real-time data alongside data from DW

Hello,
OBI = 11.1.1.7.0
We have a requirement to pull in real-time data from an external, secure web service (WS) into an OBI report. The OBI report also contains data from the data warehouse (DW) along with a calculation that is derived from multiplying the DW and WS data . In theory, the behavior that were looking for is similar to the Action Link "Invoking a web service" whereby the call is made to the web service for each row of data. How would it be possible to achieve this result on an OBI report?
Desired Result of OBI Report
Product.......Qty.........Price........Potential Revenue
TV..............100...........$500..........$50000
VCR.............22............$75...........$1650
DVD..........2500............$20..........$50000
Breakdown of the data source for each column on the OBI report
Product.......Qty.........Price........Potential Revenue
DW............WS...........DW..........Calculated_on_the_fly_(qty*price)
DW............WS...........DW..........Calculated_on_the_fly_(qty*price)
DW............WS...........DW..........Calculated_on_the_fly_(qty*price)
Thank you,
Mike

Does anyone know if it's possible to call a webservice from an OBI report to populate a column's value? Thank you for your input.

How to write data from query into Real time cube?

Hi All,
Can anyone explain me step by step how to write data into a real time cube from front end queries.
Thanks in advance

Hi
You can do this using Integrated Planning
You need to create a aggregation level on the Real Time infocube and can create Planning function/sequence, Variables if needed.
Then you can create query on this aggregation level and you can make the keyfigures Input ready in property pane and you can change the data and save it into cube.
Please find below help link which clearly explains step by step about Integrated Planning like creating input ready queries etc.,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Regards
Ravi

Booting Into Real-Time From Hard Drive

Hello,
We have a system that is real-time compliant, as said so by the pceval software that NI has on their website, that will not boot into real-time OS from the hard drive. It can boot into RTOS with the floppy boot disk, but for some reason it can not do it from the hard drive alone. We made a format hard drive disk and run it and it says that it succussfully installs the files and tell us to reboot. When we do so the system has a short blinking line and just sits there, almost like the system is being haulted. We have formatted the hard drive many times using the format hard drive disk and we have even tried other floppies thinking that the disk was bad. We don't understand why it could boot into the RTOS from the floppy but not from the hard drive itself. The only thing I can think of is that the disk isn't writing the right MBR to the hard drive and it's not getting directions to boot. I have been working on this for quite some time, so any help would be greatly appreciated. Thank you.
Michael

We have actually figured it out, after many long days. You just install the RTOS like Labview says and make sure it is the first partition. Whether that is on another hard drive that is the master or if it is actually the first partition of the drive. We had two seperate drives and we were running Windows as the Master and the Labview RTOS as the slave. When we switched them it worked. Also, doing a long format (Not Quick Format) also fixed the situation. For a bootloader we are using GAG, THE GRAPHICAL BOOT MANAGER which can be found for free on google. Thank you for your help.
Michael

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Need Suggestion On Real Time Data Accees

Hi,
Our application (let say A) runs on * 8.1.7.4.0*
Another Application (let say B) runs on *10.2.0.4.0*
Both the application A and B exchange data through DB links.
Both the application A and B perform select and DML on other tables.
Application A has views (approx. 10 views) on application B 's table through DB links.
Application B also has views (approx. 50 views) on application A 's table through DB links.
Application A has store procedure (approx 10 SPs) through which it does insert/update on two of application B 's table approx 15K call of that procedure per day.
Application B also calls some of the application A 's procedure to insert/update data in application A 's table.
Currently both the application's data center are at the same place. But, there is a proposal/need to move application B's data center far away from the current location. Because of these we are in a assumption that DB Link over WAN will create performance issue and searching of probable replacement.
After of couple of discussion we have identified approx five application A 's tables which are frequently accessed by application B and expect real time data.
Similarly, Application A expect real time data from two application B 's table.
'Golden Gate' mechanism came in our discussion, butt it's expensive,
Can we replace this store procedure code/dml with web service call or so ??
Can anyone suggest ... what kind of approach we should take here ?

Views which are residing in application A 's side use many internal tables and one or two application B s table.
I don't have idea on 'multi-master replication ' ... is it two way replication ..? ... you aware of any documentation I can refer ..? How costly it is (if you can give an idea) ?
Also, among many tables we need near real time (2 mins interval) replication on 5 tables.
MVs again have dependencies on DB link, which exactly what are trying to replace (assuming performance issue)
With fast refresh (let say 2 minutes interval) method on MVs do you think it could cause performance issue specially when data center are at different location ?

Real time project Help

Hello
I've been given a new project to attempt which involves developing a java application which takes real time data from the internet, stores this data in a database and then allows manipulation of this data. Any info about how this could be acheived would greatly appreciated.
Many Thanks

I intend to design a system which takes seismic data
from specifc web sites and calculate the risk of aSo you have a program that runs periodically to collect the data from
different places, transform it to your format and store it to a database.
and your sources are Webservices OR you plan to get an html pages and
filter out what you want OR a mix of both.
the second program can take the data present in the database at that
moment and give the tsunami probability
tsuinami occuring from this. I would like to know
which database software would be the best to use.That depends on your design constraints. Firstly you need to decide what
kind of a database you want ( RDBMS, obj dbs, ..) and then lock on a db.
A relational db may be what you decide on and in the free domain you have
say MySQL
Also how can i set up the data transfer, could this
be done with the java.net api using the url
resource.In case you are picking htmls, yes. If webservices are available, check out
stuff like apache AXIS..

10 band real time equalizer from mic to earphones

Similar Messages

Maybe you are looking for