10 GBs of "other" space used, other (in this case) isn't anything

i already had to send back on 3G, and since i got the replacement i've had to restore it twice, and it has yet to make a new backup for me, it starts but never finnishes.
the issue, when i sync(ed) the last time after restoring, it started sizing the pictures and i could see the meter in yellow going up. in the moring i look and i have about a gig audio used, little over a gig video, little over a gig photos, and 10 GB other..... now i saw the other before it moved on from apps and it was almost nothing. and one of the pop up windows said it couldn't move any more photo albums cause there wasn't enough space. i've looked through all the tabs in itunes sync section and there is nothing that could be representing the "other"... and apps are far to small even if i had 100.
i've tried unchecking more videos and other things and it does take that space back but itunes hasn't noticed its mistake yet.
any advice?
there is 1.03GB free space right now (my photo albums are probably bigger then that)

thank you i expected someone to say that..... i didn't have this problem before, and so the corrupt file would have to be an application? cause there aren't any other files in the other cadagory that i have checked. could it have become corrupt on the transfer to the phone... otherwise i'll have the same problem again. it seems that none of the apps should be corrupt from the download from itunes, should i just assume this was a random thing, cause those keep happening to me, my phone)

Similar Messages

My IPhone 4S has 9GB of "other" space used. How do I determine what "other" is. I need to make space to upgrade my phone to IOS 8.1.1

I have a IPhone 4S running IOS 7.1.2. I want to upgrade to IOS 8.1.1. I have 2 GB of free space. I have 9GB of "other" space used. How do I determine what "other" is and how do I delete some of it to make room to upgrade?

What is "Other" and What Can I Do About It?

Will it feasable to use Module in this case :screen shot attached

Hi ,
We are developing a Application which provides several facilities like Forum , Remote User , --- etc screen shot attached for this reference .
Please tell me will it feasable to develop each of this service as a Module ??
Please tell me shall we go for seperate Modules or for Seperate Components , what will be feasable
Please share your experience

Anybody please tell me if its better to go using Modules Approach , in case if they were part of the Application itself .
Thanks.

Preventing SQL injection - can't use cfqueryparam in this case

Hello. I have a form with a checkbox next to each row. If the user checks some boxes, then clicks the "Delete" button, I want to execute the following query, but I want to protect it from sql injection attacks:
    <cfquery datasource="#application.mainDS#">
        delete userMessages
        where messageID in (#form.messageID#)
    </cfquery>
As written above, it works fine. But if I try to protect this code with <cfqueryparam value="#form.messageID#" cfsqltype="cf_sql_varchar">, I get this error: "Conversion failed when converting the varchar value '7,21' to data type int" (7 and 21 are the messageID's to be deleted). Obviously the comma prevents conversion to an integer.
If I use cfsqltype="cf_sql_integer", then the string gets converted to a single integer (in this case 40015, which is nonsense).
I tried passing form.messageID to a stored procedure, but I seemed to have the same problem there. I could run the query in a loop where I just delete one row at a time, but I'd like to run just one query if I can do it safely. Any ideas?
Thanks.
PK

I agree that you should not do an SQL "DELETE" from a web page. Instead, use "soft deletes," where you contrive for there to be a deleted_flag (boolean), and maybe deleted_by (varchar) and deleted_timestamp. Then create an SQL "VIEW" which automagically omits the "deleted" records.
It is also a very good idea to refer to the records using a nonsensical, made-up "moniker" instead of actual record-IDs. You see, "if I am a nasty person and I know that there is a record #123456, then I'll bet I know the record-IDs of 123,455 other records, too." But if you refer to the record as "QZB0E9S" and the next record-id in the list is "4Q_9RJPEM2" then it won't take me long to realize that I can't get too far, not even by brute-force. (And if I see that the record-IDs seem to have verification tags, like "QZB0E9S:4E396", then I know that I am really scroo'd in my hacking-attempt because even if I did somehow million-monkeys my way into a valid record-ID, I've got no earthly idea how to come up with the tag.
It pays to code defensively, like this. And it doesn't really take more time. Without question, always use <cfqueryparam> !!

TS1503 How can I reduce the amount of 'other' space used up on an iPhone 5?

I am almost at storage capacity on my iPhone 5. Almost 1/3 of my 16GB is taken up by the category 'Other'. I have read posts pertaining to this with solutions that are supposed to help by deleting all of my music. But I have also been advised not to try that. Any other suggestions or comments?

If you have read the countless posts answering this question, then you n=know that you need to restore the iphone. You can try from backup first. If that does not help, then restore as new.

My mac book air says that I have over 20gb of other space used.

How do I get rid of it I tried to turn off the time machine and other sudo commands and nothing seems to work.

"other", refers to things that can't be categorized in the other sections of Lions storage display. "Other" contains the operating system, system files, and other random things that vary among users. 20gb in the "other" category is very minimal. Leave it be unless it grows larger.

How to use LIKE in this CASE?

There are multiple values that start with "Aerospace". All of them are going to be set to the same value. I'm trying to write a Case Statement that will replace all of them with the new value, but i can't get the LIKE to work correctly.
This can probably be done with REPLACE, but It's bugging me that I can't get the LIKE to work.
I've tried a few variations, but compiler hasn't like any of them. I'm hoping to have one line of code that will work for all of the possible choices.
What is the best way to use a LIKE or similar thing (such as CONTAINS) to set all of the fields with "Aerospace" at the beginning?
Sorry for the small font above. I didn't see how to change it.
'New Sector Focus' = CASE sectorfocus
WHEN sectorfocus LIKE 'Aerospace%' THEN '201010 - Aerospace & Defense'
ELSE sectorfocus
END

CASE expression looks good. CASE blog:
http://www.sqlusa.com/bestpractices/training/scripts/casefunction/
>Sorry for the small font above. I didn't see how to change it.
Use the HTML icon to edit the html code.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

IS it right using StringTokenizer in this case ...(pls see code& expl)

Hi
This project takes a comma delimited input file , where the values are in double quotes .The inputfile has more than 200 columns.
ex: "12345","1","USA County School,Public","Rank1","TX","USA"
if we observe the 3 rd column in the first record in the above example , has value as "USA County School,Public'
Now i have to get each value of the record , add some conditions and create few output files for further use .
The first step in my code is :-
1 ) using StringTokenizer and creating tokens
When i am creating tokens , token3 ie., column3 value is splitting into 2 tokens . where as actually it should be only one token as column3 value is in double quotes.
how can i solve this problem of not creating 2 tokens , when a value is in quotes and it uses a comma .
pls help me .. what is the other way to generate the values which are in double quotes neglecting the comma (if any exists within the quotes) for further use from each record of the input record .
Thanks

1sai wrote:
i am new to java , can u tell me which csv parser i should use to acheive my objective.Any one.
>
and a skeleton of code will be very helpful.The parser probably comes with some example code. Examine the site.

New to Using Time Machine, Should I Even Use It in This Case?

Hey everyone
So I just started a full Time Machine backup on my Macbook Pro to my Seagate 2TB External Hard drive. I make music, so I have a lot of projects and sounds, which I would like to have backed up just incase something happens to my Macbook. I have around 250GB of stuff on my computer, and it says that's it's going to take around 12 hours to back everything up. I'm new to using Time Machine, so I have a few questions:
Will this occur all the time if Time Machine is running? Like, will it keep updating the data I already have and replacing it, or will it just backup new changes/files after this first backup is complete? Is there an option/preference I can change so it only backs up new changes/files instead fully backing up every day?
Does Time Machine store the files/folders onto the external hard drive, or is it just like a backup file that you run which backs up everything?
Thank you guys in advance, really need help with this!

You should not use a Time Machine backup drive for permanent data storage. Use a separate drive for that purpose. It's much safer. Time Machine will over time delete files if they are deleted from the source drive which makes Time Machine a poor long term storage option. If you want a permanent storage option buy a separate drive for that purpose, but do not use Time Machine. User other backup software:
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

How to use counter in this case

in my selection screen i have billing doc no-vbeln.
in my ztable i have etimes a field.
when i enter a bill doc no and press f8, my etimes feild in ztable sets to 1.
my requirement is if i enter a bill doc as 97600654 for first time, etimes is 1.
for second time if i enter that same bill doc i.e 97600654 , etimes should be 2 and if third then 3 and so on.
if a new doc is entered then etimes is again 1.
how to code this..plz provide some code.

Hi Rudra,
First You need to create a Ztable(say ZTT_VBELN_COUNT) with Three fields MANDT VBELN ETIMES.
Now in your program add code as below;
DATA wa_vbeln_count type line of ZTT_VBELN_COUNT.
SELECT SINGLE * FROM ZTT_VBELN_COUNT INTO CORESSPONDING FIELDS OF wa_vbeln_count where VBELN = lv_vbeln.
IF SY-SUBRC EQ 0.
   wa_vbeln_count-etimes = wa_vbeln_count-etimes + 1.
ELSE
   wa_vbeln_count-vbeln = lv_vbeln.
   wa_vbeln_count-etimes = 1.
ENDIF.
MODIFY ZTT_VBELN_COUNT FROM wa_vbeln_count.
Regards
Karthik D

How to use recursive in this case?

I have a tree showed in bweb rowser UI like this
+- node1
| |
| +- node_value1a    X
| +- node_value1b
| +- node_value1c      X
|
+- node2    X
| |
| +- node2a      X
| | |
| | +- node_value2a1   X
| | +- node_value2a2   X
| |
| +- node_value2b     X
|
+- node3
|
+- node_value3a    X
+- node_value3b
At the begining I will retrieve the user permission for each node value and show them as checked "X" , Each node have a biding userObject with property key and check status and other more(we will focus on node key name and check status only). The parent node will be calculated as checked only if all its children are checked. So every time user click one node or node value(node without children). I will re-calculate the all tree nodes status based on all node_value again and update all check box in UI page. This seems need to go from bottum up since I will do:
. Upon the clicking of one node(can be any node) I will send a http request back to server with that node key name. I will then do the following:
if it is uncheck requrest -> updated all its childrens as unchecked -> recalculate all its parent to update their check status to unchecked
if it is check requrest -> updated all its children as checked -> recalculate all its parent to update their check status.(may be check or uncheck depend on other sibling node status).
The porpuse is to update that user's access right.
I get lost when I try coding this feature. Could sonebody here help me out ? Thanks

So how far have you got so far?

How to use to_date for this case?

Hi,
I bind parameters in java code.
The param type in java is Timestamp and the data type in table is date.
Here is the sql section printted in log:
2004-08-01 10:00:00.0 <= table.datetime
Why there is a ".0" after second?
And how to use to_date to convert "2004-08-01 10:00:00.0"?
Thanks!

Hi,
Here are a few possibilities
SQL> select cast(timestamp '2004-08-01 10:00:00.0' as date) from dual;
CAST(TIMESTAMP'2004
2004-08-01 10:00:00
SQL> select to_date('2004-08-01 10:00:00.0','YYYY-MM-DD HH24:MI:SS".0"') from dual;
TO_DATE('2004-08-01
2004-08-01 10:00:00
SQL> select to_date(substr('2004-08-01 10:00:00.0',1,19), 'YYYY-MM-DD HH24:MI:SS') from dual;
TO_DATE(SUBSTR('200
2004-08-01 10:00:00

IOS 5 took over 33gb in "other" space, what did I do wrong?

So I just did the IOS5 update and now my "other" category takes up 33gb. This can't be right. Any ideas of what I can do to fix?

RESTORE NOT NEEDED TO RESOLVE "OTHER" SPACE ISSUES
I may have a solution for this as I also experience this problem on the iPad 4 (retina display) 16gb where by I had over 2gb as "other space"
First and foremost "other space" should be between 800mb and 900mb - these are preferences, apps, syncing data (not the actual photos your contacts yo may sync)
I plugged my iPad into computer and did my normal sync
I ejected the iPad.
I turned the iPad off by pressing the on/off button and then sliding across to power down
I waited 5 - 10 minutes
I turned the iPad back on and waited another 5 - 10 minutes
I connected it back to my PC and opened iTunes
I noticed that the 2.74gb "other" space reduced to 835.4mb within a few seconds.
I downloaed iExplorer and installed it (free version will do the trick)
Have iTunes open with iPad already connected
Open iExplorer and click "demo"
Under your iPad navigate to Media> Photodata> Thumbnails
Here you will see the following file names: 158x158, 240x240, and 332x332 with the extension .ithmb - make a note of these file sizes.
Right-click each one and hit delete and click ok if a warning sign comes up
Eject iPad using iTunes
Close any open apps
Do a hard reboot - hold the home button down and the on/off button together until the screen goes black and turns off - this can take up to 10-15 seconds to do
Sometimes the iPad may reboot by itself, and sometimes it may not - if it doesn't use the on/off switch to turn it on.
Open iTunes and then iExplorer and navigate to Media> Photodata> Thumbnails once again
You will see the same files you just deleted - but instead of being the size you made a note of, they will be considerably smaller.
Go to iTunes and check your "other" space and should be within the 800mb to 900mb
This also works with the iPhone 4s and other devices running iOs 4 onwards.
I have several devices currently on iOs 6.1.1 and all the "other" space currently shows between 800mb and 900mb which would appear to be normal
I hope all this helps and please let me know if it solves or doesn't solve your issues
RESTORE NOT NEEDED TO RESOLVE "OTHER" SPACE ISSUES

Is there a way to get rid of the other space without restoring

Is there a way to get rid of the other space without restoring on an ipad

RESTORE NOT NEEDED TO RESOLVE "OTHER" SPACE ISSUES
I may have a solution for this as I also experience this problem on the iPad 4 (retina display) 16gb where by I had over 2gb as "other space"
First and foremost "other space" should be between 800mb and 900mb - these are preferences, apps, syncing data (not the actual photos your contacts yo may sync)
I plugged my iPad into computer and did my normal sync
I ejected the iPad.
I turned the iPad off by pressing the on/off button and then sliding across to power down
I waited 5 - 10 minutes
I turned the iPad back on and waited another 5 - 10 minutes
I connected it back to my PC and opened iTunes
I noticed that the 2.74gb "other" space reduced to 835.4mb within a few seconds.
I downloaed iExplorer and installed it (free version will do the trick)
Have iTunes open with iPad already connected
Open iExplorer and click "demo"
Under your iPad navigate to Media> Photodata> Thumbnails
Here you will see the following file names: 158x158, 240x240, and 332x332 with the extension .ithmb - make a note of these file sizes.
Right-click each one and hit delete and click ok if a warning sign comes up
Eject iPad using iTunes
Close any open apps
Do a hard reboot - hold the home button down and the on/off button together until the screen goes black and turns off - this can take up to 10-15 seconds to do
Sometimes the iPad may reboot by itself, and sometimes it may not - if it doesn't use the on/off switch to turn it on.
Open iTunes and then iExplorer and navigate to Media> Photodata> Thumbnails once again
You will see the same files you just deleted - but instead of being the size you made a note of, they will be considerably smaller.
Go to iTunes and check your "other" space and should be within the 800mb to 900mb
This also works with the iPhone 4s and other devices running iOs 4 onwards.
I have several devices currently on iOs 6.1.1 and all the "other" space currently shows between 800mb and 900mb which would appear to be normal
I hope all this helps and please let me know if it solves or doesn't solve your issues
RESTORE NOT NEEDED TO RESOLVE "OTHER" SPACE ISSUES

All music is gone but "other" space is full

My iPod was messing up so I reset it.
I went home and reset it (holding down the center button and menu button) while it was plugged in (mistake) and after that all my music was gone. However, when I go to memory, there's still 113 gb of "other" space taken up. This is a 120 gb ipod classic.
Is there any hope of recovering my music or do I have to restore?

Could you explain in more detail what exactly is your situation? Do you mean that the "Purchased Items" playlist is missing from iTunes? Or that the tracks you purchased aren't shown in the iTunes Library any more? Or do you mean something else? If you'll provide a more precise description of what's going on, perhaps we can offer suggestions.

10 GBs of "other" space used, other (in this case) isn't anything

Similar Messages

Maybe you are looking for