10 Keypad Not Working? Responding? Okay - this is solution..

I was told to go into System Preferences - Universal Access (not your Keyboard & Mouse) and click then look for Mouse and turn off Mouse Keys.
Your 10 keys should respond.
Thank you to a "windows" gal!!!
MacOwner

Thanks!

Similar Messages

E63 Keypad not working at Times

I have E63 which i have purchased just 5 months back. Key pad works in bizzare manner, some time it works and some times it doesnt even respond. From past 2 days i couldnt unlock my phone since the unlock key is not working/responding, only the red(disconnect) key works. This happened many times in this month, the whole thing goes down for few hours and suddenly again it starts working. i have forcibly restarted the phone by removing and replacing the battery but no use. is there any mothd to format the phone, i have tried answerkey+*+3 it didnt work. Please help me out.

I too experience intermittent problems unlocking my E63-1. Often (once a month or so) I'll receive an SMS, go to unlock the keypad in the usual way, to find the top-left soft key does nothing.
The other buttons appear to work, in as much as pressing a key cancels the screensaver (clock) and pressing "red" (end/power) lights up the screen and keypad in the usual way. The phone clearly has not "crashed" as such, since it will accept incoming calls and text messages (and I can even send and read messages over a bluetooth connection!), but the keypad is simply ignored. The only way I've found to get back control of the phone is to pull out the battery to force a restart.
I can only assume it's a software problem, and I don't think there's a solution or even a workaround at present. As with so many problems, we can only hope that someone from Nokia is reading and decides to investigate: as I've previously mentioned in other threads there appears to be no feedback from frontline support to the phone developers. I hope someone proves me wrong!

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

Problems with lost bookmarks, keypad not working, apps shutting down

Out of the blue, while I was still using Safari, all my bookmarks disappeared. No matter how many times I tried to add a bookmark it doesn't show up on my Bookmarks tab. I've tried adding a new folder on my bookmarks tab but it doesn't work either. I don't know what's going on. I've already reset my iPhone once because there were so many problems after I downloaded iOS4.
Also, I don't recall seeing "History" under the Bookmark tab but now it's there. The History option (along with the websites, etc.) comes and goes. Even after I delete everything from the Settings app, the history still shows up afterwards.
Any help or suggestions would be appreciated. If I absolutely need to (again), I'll reset my iPhone. I honestly didn't think I was going to have this many problems with iOS4. Everything was perfect before I downloaded the new operating system. I'm also experiencing other problems with iOS4 such as the keypad not working during a phone call and apps shutting down multiple times. Again, any help or suggestions would be great.

it just sorta started working again

My auto-lock does not work properly in this new iOS 6

My auto-lock does not work properly in this new iOS 6

Do you have your Assistive Touch on? Per another user in another forum:
Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

Keyboard Keypad not working

iMac G5 rev.A OS 10.4.11, Original Apple Pro Keyboard
I never noticed that the numerical keypad on the RH side of my keyboard was inoperative, in that I cannot use the keys to type the digits in any text, nor for entering numbers in an Excel spreadsheet cell.
I never use it except to use the 12346789 keys to nudge the pointer. I always use, by habit I guess, the number keys above the letter keys.
I checked the Finder’s Help and did not find any specific info about the numerical keypad. I thought that may be the Extended Keyboard that came with the computer, somehow had not been identified properly when I installed OS 10.4. Reading Finder’s help about that subject, it said to “Open Preferences, Click Keyboard and Mouse, Click Keyboard, Click the “Change Keyboard Type” button, and Follow the steps when the Keyboard Setup Assistant appears.”
I have one problem: my Keyboard and Mouse Preference does not have a Change Keyboard Type button.
Any suggestions as to how I can get the numerical keypad to work?
jb

Hi,
This morning my numeric keypad quit working and
I lost an hour trying to fix it
(COUGH theft of my time).
This article didn't come up in a Google search
because this article doesn't use correct terminology.
So, for Google's benefit, I'll add a few search terms here:
numeric keypad stopped working
numeric keypad doesn't work
numeric keypad won't work
numeric keypad quit working
Mac OS X 10.3
G3 G4 G5
_Recommended Solutions_:
1. Press the Option key 5 times to turn Mouse Keys off.
2. Better yet, disable the feature so it can't get turned on again
every time a book leans against the keyboard.
Go into System Preferences,
click Universal Access,
click the Mouse tab (even though this is a keyboard problem),
and uncheck the checkbox labeled "Press the option key five times to turn Mouse Keys on or off".
Gotchas suck!
Sincerely,
J. E. Brown (mr.)
Software Engineer and Tester
Testing Pays!
<Edited by Moderator: Please See Terms of Use for URL in Signature>
Los Alamos, New Mexico USA
+J. E. Brown has been a software engineer for over 20 years.+

Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone" It worked before but now it doesn't...I don't think I should have to buy a new one...

since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"

Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?

Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?

i would try an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
if it still gives that message, you need to take it to apple store or apple service provider to have a new card installed. the apple site gives listings of providers and stores in your area:
https://locate.apple.com

My computer iTools not working.how to this fix ?!!.plz help me

My computer iTools not working.how to this fix ?!!.plz help me

Hi We don't have a crytral ball more infomation about your problem if you need help . Cheers Brian

I just upgraded my Macbook (late 2007) into X Lion , but the multi touch gestures is not working. Is this not compatible with my Macbook?

I just upgraded my Mackbook (late 2007) into X Lion , but the Multi Touch gestures is not working. Is this not compatible with my Macbook?

jimmyfromdubai wrote:
... do I need to buy a new MAC office?
A better solution is to try a number of better, free alternatives. Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
I use Apple's Pages ($19.99) as well as OpenOffice and have been completely Microsoft - free for over a year now. Life is better without Microsoft.

After updating to ios 7.0.6 i keep getting an error message saying "this cable or accessory is not certified and will not work reliably with this iphone" every two minutes and its annoying

What is up with this error message after updating saying our cables are not reliable?

Thank you for this suggestion, but the message continues to display every couple of minutes. (e.g. "This cable or accessory is not certified and may not work reliably with this iPhone.)
Not only is it annoying and concerning...this is draining my battery, as the iPhone keeps waking up to display the message over and over. Like "MartinLegodi" above, I also have no cable or accessory plugged in and only use Apple cable and products when I do.
It's a disconcerting mystery.

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from Best Buy. What other information does Best Buy need? What will they do? Will I get a new box? What happened to the days of just typing in a simple s/n?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Why does my phone keep popping up messages "This cable or accessory is not certified and may not work reliably with this iphone" when there is no cable connected?

Why does my phone keep popping up messages "This cable or accessory is not certified and may not work reliably with this iphone" when there is no cable connected? This has been happening since IOS7 was installed and has become worse with 7.1. I have reset the phone several times with no change.The phone charges properly & I have never used anything but an Apple Lightning cable.

I already cleaned the port with compressed air before submitting the problem. I since cleaned it with a toothpick and dug out some more lint. this seems to have just about fixed the problem since I have only had the error pop up 3 times since then and i was getting the error constantly before.

HT201441 this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many wil

this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many will have t

If your device is disabled...
Connect to your computer in recovery mode per the instructions in http://support.apple.com/kb/HT1212
You may need to do this more than once.

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara

10 Keypad Not Working? Responding? Okay - this is solution..

Similar Messages

Maybe you are looking for