10 KS/S data for 28 Channels

Hi All,
From the field I have 28 channel sensors data, the data rate is 10KS/S for each channel.
I have to store field data upto 3 Month to generate the historical reports or to analysis the field conditions.
The data is very huge so i want some suggestion from you all to store this much of data techinique or prefered way to store this much data.
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Solved!
Go to Solution.

Thanks for your suggestions.
The project requirements are already define by the costumer. The costumer wants complete 10K data of all 28 channels. He can't afford the less sample rate or data loss.
I tried with TDMS file to store 10 KS/S (SGL Format) data for 28 channels(Sine Wave); the file size is around 3.5 GB for 1 hour. The complete day data come around 84 GB, I am not sure about the TDMS file size this can support upto this much of file size, if this not support then again I have to save complete day data in set of bunch of TDMS files. Now if costumer want to see complete 1 hour data report in graphical or tabular format the task to perform the action takes around 2-3 minutes or some time it come up with some error like "Not Enough Memory". So in the end of the day if user want to see the complete day report how I can provide the report that have such kind of huge data.
I am using PXI RT system with some local hard disk. The PXI always have 7 days data as an backup or in case of connection failure with server the data backup is in PXI.
So my issue now same what database or file format i have to chosse to store complete data.
If there is any techinque to compress the data please suggest me.
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

Similar Messages

I want to acquire data for multiple channels using PCI 6120 that works on traditional DAQ. I cannot access more than one channel, can someone help me or if someone has data acquisition vi for PCI 6120, please send me over . Thanks

I have PCI 6120 card and I want to acquire data for more than one channels. I'm using traditional DAQ to get it. But it does not work for more than one channels. If someone has a data acquisition vi for PCI 6120. Or some suggestion how to aquire data please let me know.
Thanks

Hello DSPGUY1,
You can definetly acquire from several channels. For your convenience, I have appended below the content from help that tells you how to configure it:
"channels specifies the set of analog input channels. The order of the channels in the scan list defines the order in which the channels are scanned during an acquisition. channels is an array of strings. You can use one channel entry per element or specify the entire scan list in a single element, or use any combination of these two methods. If x, y, and z refer to channels, you can specify a list of channels in a single element by separating the individual channels by commas, for example, x,y,z. If x refers to the first channel in a consecutive channel range and y refers to the last channel, yo
u can specify the range by separating the first and last channels by a colon, for example, x:y."
Hope this help.
Serges Lemo
Applications Engineer
National Instruments

Service Desk: Pricing data for partner could not be read

Hi all,
I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
I am facing some errors related to the CRM part of the configuration.
When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
Could you please help me what can cause the error?
Thanks in advance,
Vaclav

Hi Balaji.S,
my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
Vaclav

Error in gettnig logon data for Adapter Engine

Hi,
We have Http > XI > RFC Scenario. We are getting 401 unauthorized error in "CALL ADAPTER" section. From the trace its clear that the logon data for the adapter engine (there is no value for USER in trace) is not getting poulated. We fixed this issue last evening....i think by doing full cache refresh, but this problem propped up again today. Yesterday when this issue was fixed the USER has "PIISUSER" in the trace.
We haven't changed any config settings since yesterday so all the passwords and other config info is same. Not sure what's causing this issue. Below is the trace. Any help will be highly appreciated.
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.ppi.dac-sapd1</Trace>
<Trace level="3" type="T">URL = http://dac-sapd1.actv2.com:8007/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User =</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> 401 &nbsp Unauthorized</td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23">SAP J2EE Engine/7.00 </td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> Authentication did not succeed.</td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"> Details:</td> <td align="left" valign="top" height="48"><pre> No details available</pre></td> </tr> </body> </html></Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 401</Trace>

Hi,
go to the exchange profile.
there u need to maintain the password for the XIISUSER.
I think u need to restart the J2EE Engine for the changes to take effect.
Regards
Cornelius

M7279- Data for creating a delivery is incomplete (Vendor)

Dear All,
i am getting below error while processing Goods receipt.
"M7279- Data for creating a delivery is incomplete (Vendor)"
1.I am doing Goods receipt with mvt type 521( GR without ref to prod order).
2.storge location is WH manged + HU managed.
3.Material master is assinged with sales org / distribution channel- sales view.
4.maintained for Transportation Group . loading group - sales gen/plant data.
5. Maintaine for shipping data for Storage location ( customisation -SPRO-LE-Shipping-Basic shipping function- Shipping points and goods receiving points determination-Assign goods receiving points for Inbound Deliveries.)
6. HUM- setting - LG-HUM-HU requirement for storage location and default values for deliveries)
Why system is thowing this error message as in my case vendor does not comes in to picture ( I can cosider if a GR is with refence to PO , in that case in customer master number has to be maintained in vendor master + shipping condition entered in customer master)
Could you pl help me on above ( as this is 521 movement , it should not have any link with vendor or customer master) then why i am getting this error.
Appreciate your earliest response.
Om

I am doing simple goods receipt without reference to any document ( mvt 521 - goods receipt without ref to production order) , in that case it should not ask for any vendor or should not search for vendor code , i am not getting why it is searching for vendor.
If i removed the setting related to HU management for storage location then it allows me to post the document without any error, but if i activate for HU managment in below path i am getting error ( even in below path if i entered any vendor code then it allows me to post the document)
Logistics general- Handling unit management- basics-materials management - inventory management -HU requirement for storage location and default values for deliveries
plant Storage location Partner storage location Sal org Dist chan shipping division vendor customer HU requred
05 ZBD1 ZPK1
in above if i entered any vendor code then it allows me to post the doc but i remove it then i am getting above error.
If there any alternative or other setting to overcome this error.
Thanks
Om

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

How to handle HTTP-POST encrypted data for ECC Using proxy or RFC

I have a scenario HTTP-POST ->PI->ECC.sender is HTTP Post send encrypted data i need to handle the data and stored in to SAP ECC with out decrypt using PI .what should i take for receiver can i use inbound proxy or RFC and how can handle the encrypted data for decrypt.
Regards
Ravi

1. my sender is HTTP POST . what should i configure in sender communication channel in SAP PI .like SOAP or HTTP .What are the parameters i need to pass .
>>>
If you are on PI 7.3 and above, configure the HTTP AAE adapter - Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library
2.while using inbound proxy for encrypted data i need store the data in to table , the same proxy can i call another outbound service for decrypt same data.
>>>>
Yes you can always a proxy within a proxy.

Set data for the x-axis

Hi,
I made a program which allows the user to configure and measure Temperature and voltage using a DAQ device. I also set a possibility for the user to save his data of his test to lvm file and then upload and read it on a waveform chart. My problem is that while the user gets multiple plots represented in the y axis (the different Temperature/voltage channels signals of the DAQ), the x-axis is set to time by default.
How can I change it? I would like to allow the user to change the x-axis from time to one of the plots of his tests data.
for example, lets say I get 2 signals of temperature (mod1/ai0 and mod1/ai1) and 2 signals of voltage (mod2/ai0 and mod2/ai1) on the y axis (amplitude) during 3 hours (represented in x-axis) and I would like to allow the user the option to play with the data so he can see temperature on the y axis as a function of the voltage on the x axis (instead of time) and the option to configure any kind of combination while the program is running (set mod1/ai0 in the y-axis and mod2/ai0 in the x-axis, for instance).
I have tried various things but nothing seems to work. It looks like it is very easy to change plots between multiple Y-axis with property node of "Active plot" and "Y scale index" but I can't figure out how to change plots from the Y-axis to X-axis and vice versa.
I hope this clumsy message is somehow clear..
Thanks a lot in advance,
Shahar L.
Detectomat Gmbh
Hamburg, Germany

Hi Shahar,
You will have to use an XY graph, not a waveform chart, if you want to set the X-axis data. Under "Find Examples", see "Fundamentals"..."Graphs and Charts" for some examples of XY-graphs and how to use them. You can't change the X-axis data of a waveform chart, as you have discovered.
Hope this is helpful...
Diane

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

Re : Organizational data for inter-company billing

Hi
While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant) i am getting the following error
" Organizational data for inter-company billing
missing in plant SUDA "
How to solve.
Thanks
Anto

Hi Anto,
IMG check wheather you assing Supplying company sales area to Supplying plant.
IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
Regards,
M.Manickam

Organizational data for inter-company billing missing in plant 2200

Organizational data for inter-company billing missing in plant 2200

Dear Siva,
This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
Now you try
I hope it will help you
Regards,
Murali.

Problem to calculate the coherence (using NetworkFunction-VI) with only 1 row of data for each, the stimulus and response input

Hello,
I am trying to calculate the coherence of a stimulus and response
signal using the Network Functions (avg) VI's. The problem is that I
always get a coherence of "1" at all frequencies. This problem is
already known (see KnowledgeBase document: Why is the Network Functions (avg) VI's Coherence Function Output "1"?).
My trouble is that the described solution (-> the stimulus and response input matrices need to have at least two rows to get non-unity coherence values) doesn't help me much, because I only have one array of stimulus data and one array of response values.
Thus, how can I fullfil the 'coherence-criteria' to input at least two rows of data each when I just have one row of data each?
Any hint or idea is very much appreciated. Thanks!
Horst

With this weird board layout, I'm not sure whether you were asking me, but, on the assumption that you were, here goes:
I found no need to use the cross-power spectrum and power spectrum blocks
1... I was looking for speed.
2... I already had the component spectral data there, for other purposes. From that, it's nothing but addition and multiplication.
3... The "easy" VIs, assume a time wave input, as I recall. Which means they would take the same spectrum of the same timewave several times, where I only do it once.
I have attached PNGs of my code.
The PROCESS CHANNEL vi accepts the time wave and:
1... Removes DC value.
2... Integrates (optional, used for certain sensors).
3... Windows (Hanning, etc. - optional)
4... Finds spectrum.
5... Removes spectral mirrors.
6... Scales into Eng. units.
7... From there, you COULD use COMPLEX-TO-POLAR, but I don't care about the phase data, and I need the MAG^2 data anyway, so I rolled my own COMPLEX-TO-MAG code.
The above is done on each channel. The PROCESS DATA vi calls the above with data for each channel. The 1st channel in the list is required to be the reference (stimulus) channel.
After looping over each channel, we have the Sxx, Syy, and Sxy terms. This code contains some averaging and peak-picking stuff that's not relevant.
From there, it's straightforward to ger XFER = Sxy/Sxx and COHERENCE = |Sxy|^2 / (Sxx * Syy)
Note that it uses the MAGNITUDE SQUARED of Sxy. Again, if you use the "easy" stuff, it will do a square-root operation that you just have to reverse - it is obtained faster by the sum of the squares of the real and imag parts.
Hope this helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
ProcessChannel.png ‏25 KB

Management Portal unavailable - "cannot load management data for this resource type"

Noticing that with the exception of virtual machines, every resource type in the (non preview) Azure Management Portal is showing a sad pink icon and the help text "cannot load management data for this resource type."
So that's a near total portal outage for us. Anybody else experiencing this?
I've attempted to open a ticket with developer support but I'm not sure if that's the right channel.
Brian

Hi Brian,
Thanks for your posting!
From Dashboard shown (http://azure.microsoft.com/en-us/status/#history), Currently, the Azure portal works fine in every regions.
So I suggest you can submit a tick via this channel:
http://www.windowsazure.com/en-us/support/contact/
Also, you can click your right-top account name and select the "Microsoft Support" item to create free ticket.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Importance of Sales Area Data for BP

Please give me the various reasons for having or maintaining Sales Area for a Business Partner:
_Explanation:_ What is the importance of maintaining Sales Area Data for BP.Please list out several points.
As we know Sales Area is composed of : Sales Organisation, Distribution channel, & Division.
Thanks & Regards,

These are off the top of my head. I can reply a bit later to add some more.
1) The pricing procedure (entered in the Billing Tab) which affects the LEAD, OPPT, AG, QCTR, and TA documents. Without the pricing of the product, the transactions cannot be executed and the total product value cannot be determined. Without a total dollar value, a TA doesn't make sense.
2) The S.O defines the legal terms for the product and if the BP wants to return the product they ordered, they have that information.
BB

The meta data for the IDoc type "MATMAS05" is unavailable

Dear Gurus:
I need help in completing small test that I am doing to send MATMAS IDOC to xMII.
I have done:
1. RFC connection SM69 and tested ok
2. xMII IDOC Listner config with my SAP client
3. Connection appears in smgw ok (in logon client screen)
4. Completed Distribution channel and we20,we21
All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
On tRFC I see error The meta data for the IDoc type "MATMAS05" is unavailable.
Note that
a) I am NOT using transaction on routing tab
b) xMII version 11.5
c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
Please help.
Thanks
Jay

Jay,
What version of ERP are you using, perhaps this note will help: 770239
Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
-Sam
null

10 KS/S data for 28 Channels

Similar Messages

Maybe you are looking for