10-local.rules not setting correct group and permissions
I have a custom rule for one of my removable storage devices. The rule sets the correct symlink, but it doesn't honour the mode and group settings. Here's the rule.
BUS=="scsi", SYSFS{vendor}=="IIT-22 ", KERNEL=="sd?1", MODE="0666", GROUP="datamode" SYMLINK="mymp3"
The group exists in /etc/group and the users who need access to the device are appropriately listed.
udev has always been mu Nemesis, and I'd love to get this sorted!
ls -l /dev/mymp3
lrwxrwxrwx 1 root root 4 2010-02-07 13:03 /dev/mymp3 -> sdb1
[hierro@el-diablo]#
]ls -l /dev/sdb1
brw-rw-rw- 1 root storage 8, 17 2010-02-07 13:03 /dev/sdb1
[hierro@el-diablo]#
Any advice?
Cheers
GregW
Hey brebs
brebs wrote:10 is too low a number for the filename. Use e.g. 91, because one of the standard rules files is overruling it (e.g. 50-blah.rules)..
Thanks for the reply. I always thought that the lower numbered rules too precedent..... I should read the wiki more. I'll try this when I get home.
Cheers
GregW
Similar Messages
-
UDev not setting correct group / permissions
Hello, I am a new user of Arch, switched from Gentoo.
I can't figure out why my devices aren't being set up properly. Here is my udev config . . .
# audio devices
dsp*:root:audio:0660
audio*:root:audio:0660
midi*:root:audio:0660
mixer*:root:audio:0660
sequencer*:root:audio:0660
sound/*:root:audio:0660
snd/*:root:audio:0660
beep:root:audio:0660
admm*:root:audio:0660
adsp*:root:audio:0660
aload*:root:audio:0660
amidi*:root:audio:0660
dmfm*:root:audio:0660
dmmidi*:root:audio:0660
sndstat:root:audio:0660
# optical devices
cdrom*:root:optical:0660
dvd:root:optical:0660
cdroms/*:root:optical:0660
cdrw:root:burning:0660
A listing of the actual devices yields this though.
[root@dogma ~]# ls /dev/dsp /dev/sound/ /dev/dvd /dev/cdrw /dev/cdroms/ -l
lrwxrwxrwx 1 root root 3 2004-12-14 22:03 /dev/cdrw -> hdd
lrwxrwxrwx 1 root root 9 2004-12-14 22:03 /dev/dsp -> sound/dsp
lrwxrwxrwx 1 root root 3 2004-12-14 22:03 /dev/dvd -> hdc
/dev/cdroms/:
total 0
lrwxrwxrwx 1 root root 6 2004-12-14 22:03 cdrom -> ../hdd
/dev/sound/:
total 0
crw-rw---- 1 root audio 14, 4 2004-12-14 22:03 audio
crw-rw---- 1 root audio 14, 9 2004-12-14 22:03 dmmidi
crw-rw---- 1 root audio 14, 3 2004-12-14 22:03 dsp
crw-rw---- 1 root audio 14, 2 2004-12-14 22:03 midi
crw-rw---- 1 root audio 14, 0 2004-12-14 22:03 mixerrmbalfa wrote:title Arch Linux 2.6.5
root (hd0,0)
kernel /bzImage-2.6.5-udev root=/dev/discs/disc0/part3 devfs=nodevfs ro
it should be devfs=nomount - i'll assume you just typoed it... maybe... check "ps aux | grep udev" to see if udev is running....
rmbalfa wrote:I want the real file to belong to the audio group as well.
the real file does belong to the group - it's the symlink that doesn't... and as was said earlier, symlink permissions don't mean jack, because it will follow the link before checking permissions...
I think symlinks have permissions according to who created them... so if you really want the symlinks in a diff group, make a "udevd" user and add him to group audio... and run udev as that user and not root.... -
BKI0008E: The environment variable BI_CALLER is not set correctely. The cur
Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
Found keyword 'TIMEOUT_FAILURE' with value '1800'.
Finished reading of the Backint for MaxDB configuration file.
Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
Using '1800' seconds as timeout for Backint for MaxDB in the case of success
Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
Asking for state of database.
2009-10-22 02:06:09 Database is still preparing the backup.
Waiting 1 second ... Done.
Asking for state of database.
2009-10-22 02:06:10 Database is still preparing the backup.
Waiting 2 seconds ... Done.
Asking for state of database.
2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
2009-10-22 02:06:12 The backup tool is running.
2009-10-22 02:06:12 The database is working on the request.
2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
2009-10-22 02:06:17 The database is working on the request.
2009-10-22 02:06:27 The database is working on the request.
2009-10-22 02:06:42 The database is working on the request.
2009-10-22 02:07:02 The database is working on the request.
2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
2009-10-22 02:07:17 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
Removing data transfer pipes.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
Removed data transfer pipes successfully.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
Data Protection for mySAP(R)
Interface between BR*Tools and Tivoli Storage Manager
- Version 5, Release 4, Modification 0.0 for Linux x86_64
Build: 303 compiled on Nov 16 2006
(c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
usage:
backint -p <par_file> [-u <user_id>] [-f <function>]
[-t <type>] [-i <in_file>] [-o <out_file>] [-c]
where:
<user_id> backint utility user
<function> backup | restore | inquire | password | delete
<type> file | file_online
<par_file> parameter file for backup utility
<in_file> name of a text file that defines the objects
default: STDIN
<out_file> Pool for processing messages and the results
of the executed function.
default: STOUT
BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
BKI0021I: Elapsed time: 01 sec .
BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.Also, is there any specification about the user permissions and about how the backup should be run?
-
HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace=""
xmlns:mfl="http://www.bea.com/mfl"
elementFormDefault="qualified">
<xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace=""
xmlns:mfl="http://www.bea.com/mfl"
elementFormDefault="qualified">
<xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj -
Profile parameter icm/host_name_full is not set correctly
Hi All,
I am working on Solution Manager 4.0. When I execute TCODE "SOLUTION_MANAGER", it gives the following error:
Profile parameter icm/host_name_full is not set correctly (see long text)
When I click on "Long Text", it gives me the following message widow:
Message Number: SOL_GRAPHIC002
Diagnosis
The graphic cannot be displayed, since the profile parameter icm/host_name_full is not set correctly.
Procedure
Set the profile parameter icm/host_name_full correctly.
For more information, see SAP Notes 434918 and 677118.
I have referred to both the notes above. In note# 434918, it says that I need latest kernel patch (which is 150).Also the icm/host_name_full parameter parameter was not there in Solution Manager, so I created in the following manner:
Parameter Name =icm/host_name_full
Parameter Value=smgdcs1s.example.com
But however, the error continues to be the same.
Kindly help me asap.
Thanks in advance.
Regards,
FaisalHi Markus,
Earlier the profile was activated and server was also restarted. However, it was not efffective.
Now once again i have activated the profile and restared the server. Now I am able to see the profile and it value in
RZ10
RZ11
Thanks a alot for your valuable inputs
Thanks and Regards,
Faisal -
SiteMinder Authentication Realm has NOT been correctly configured and...
Hi All,
When I set the realm (associated with the authentication provider) as UNPROTECTED, I see the following in my AUWebAgent.log (authentication web agent log):
[31 Aug 2006 16:19:07,050] [main] [INFO] Configuration: Support for TP cookies is : ENABLED.
[31 Aug 2006 16:19:07,050] [main] [INFO] Configuration: DefaultAgentName: bppttest.micron.com.
[31 Aug 2006 16:19:07,051] [main] [INFO] Configuration: FilterDomainName: DISABLED
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Creating caches ..
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Cache Timeout specified. Default is 600 seconds
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Resource Cache Size specified. Default is: 0
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Authentication Cache Size specified. Default is: 0
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Authorization Cache size specified. Default is: 0
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: Auditing is DISABLED
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: Caching for anonymous users is DISABLED
[31 Aug 2006 16:19:07,053] [main] [DEBUG] The SiteMinder Resource Manager is checking if resource "/smauthenticationrealm" is Protected.
[31 Aug 2006 16:19:07,129] [main] [INFO] Resource "/smauthenticationrealm" is NOT Protected.
[31 Aug 2006 16:19:07,129] [main] [ERROR] The SiteMinder Authentication Realm has NOT been correctly configured and is unavailable.
Additional info:
Using SiteMinder 5.5 on WebLogic 8.1 sp5
When & if I set all my realms as protected then I am unable to startup my servers and get the folowing error:
We are trying to setup (as in intergrate SiteMinder with Savvion) SiteMinder v2 with weblogic 8.1 sp 5. We have appropriately included the references to variours siteminder related jars as per Netegrity's ASA document. We aren't using any webserver, instead wewould be using launching page (which be a protected resource). The following is the installation, configuration, and testing information related to various siteminder components:
SiteMinder Identity Asserter (IA) - installed, configured & tested successfully.
SiteMinder Authentication Provider - installed, configured & test result -> Unsuccessful.
SiteMinder Authorziation provider - installed, configured & test result -> Unsuccessful.
Has anyone seen anything similar to the following? My guess on the above is that it looks like it is trying initialise siteminder stuff every time we start each of the servers(admin, ejb and portal). Since the initialisation happens for the 1st time) when the admin server is started, an error is thrown complaining about not being to initialise when we start either portal or ejb after that. If this is true then is there a way around this problem?
The Admin Server starts fine. But when we try to start either of the ejb or portal server, we get the following error:
<Aug 16, 2006 4:03:01 PM MDT> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:225)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java :581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm (SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize (SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
>
<Aug 16, 2006 4:03:01 PM MDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException : failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9 ]>
The WebLogic Server did not start up properly.
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:225)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java :581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm (SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize (SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
Reason: weblogic.security.service.SecurityServiceRuntimeException : [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName ;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
Any help would be appreciated.
Regards,
Prashantbut it just says it cannot repair due to another program being installed.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply. -
I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
User mapping is not set correctly..!
Dear Guru,
I am working with portal 6.0 SP9, and when I try of create user, the application return "Could not create user" and I am use the user j2ee_admin. This user have admin role
I think that the user mapping is not set correctly or the permission is not correct.
The questions is: How can I user mapping set correctly?
Thanks
DyHi Dayana,
Maybe the user name is shorter than 5 characters?
Yoav -
Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
EdwardHi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
Error: property is not set correctly for User Defined Fields.
Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
satHi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat -
Webserver - correct owner and permissions
Hi
Seem to have got hacked by a "Turkish Hacker". Must have changed my ownership and permissions on the folder containing the website.
What is correct ownership and permissions I should apply to the folder? Am using BareBones SuperGetInfo to process this.And by permissions, I mean Read / Write / Execute for each of Owner / Group / World (rather than 775 or whatever)
-
Export and import Sharepoint group and permissions
We have some custom sharepoint groups and permissions created.How can i just export and import
these group and permissions into another server.
I do not want to restore entire site collection.
just the groups and permissions...hey,
You can find some code from Powershell here:
http://geekswithblogs.net/bjackett/archive/2009/04/24/the-power-of-powershell-and-sharepoint-enumerating-sharepoint-permissions-and.aspx
Or
http://get-spscripts.com/2010/07/adding-groups-with-permission-levels-to.html
Founder of SharePoint CookBook:
http://www.GokanOzcifci.be
Microsoft Certified Technology Specialist: SharePoint 2010, Configuring
Microsoft Certified Personal -
AD attributes and passwords not setting correctly
I am running FIM 2010 R2 build 4.1.3479.0 with AD servers at 2008 forest level. I have set up the ADMA for staff to set passwords and the userprincipalname attribute (among others). I have custom code in the MVextension.dll that does this. I
am having two issues going on that I believe to be related somehow.
1) These initial passwords are not being set and
2) although the userprinciplename attribute is set correctly when you look in ADUC on the "Attribute Editor" tab, it is not being displayed correctly on the "Account" tab. The User logon name and the upnsuffix fields are blank.
The pre-win2k fields are displaying correctly.
I have done a lot of work trying to figure out what is going on here and I have checked that there are no issues with rights in AD and the code. I have another ADMA that populates a different set of users in another OU and that fills out the UPN and
password and everything works as it should. The code differences between the two areas are very minimal.
The code for this is as follows:
csentry["userPrincipalName"].StringValue = mventry["accountName"].StringValue + emailExtension;
if (mventry["user_InitialPassword"].IsPresent)
csentry["unicodePwd"].StringValue = mventry["user_InitialPassword"].StringValue; // defaultPassword;
else
csentry["unicodePwd"].StringValue = Custom_Extensions.Custom_Extensions.GenerateRandomPassword();
Any ideas what to look at to try and figure out what the heck is going on would be really helpful please!
Thanks
EricaThere are no errors on creation of the user. There are no errors if I log in as the service account and try to change the password.
The emailExtension variable is the same as the one that works for the other users that work.
Maybe you are looking for
-
I have photoshop CS5 Extended but my motherboard flashed over so I have now purchased a new computer and of course wish to download another copy, I have my Serial No from my account and I have downloaded a new copy of the program, the problem comes w
-
Playlists don't work with separate audio clips
I have a timeline with 8 different clips and chapter playlists set up to play each clip individually and to play them in pairs. This works fine. But when I add audio to the timeline it goes wrong. I have 8 different audio clips that match up with th
-
Installing EHP4 on ERP 6.0: Checks after Phase SHD_RUN/ACT_UPG were negativ
hi I'm installing the EHP4 on an ERP 6.0 System and get the following error: Checks after phase MAIN_SHDRUN/ACT_UPG were negative! Last error code set: Unresolved requests in buffer EH4 Check logfiles 'ACTUPG.ELG' and 'C:\usr\sap\EH4\upg\abap\log\SAP
-
Buying used Ipad 2 still worth it
Hello everyone, I am a Mac user for about a year now and really like the concept of the Apple ecosystem. Recently, a friend offered me his Ipad 2 (16gb) for 150€ and I am considering to buy it, but I'm not sure yet. Maybe you can help me with that. I
-
I have today an A2000 IS camera and want to get a new camera that the time between shots is shorter (the time from when I take a picture until I could take the next one). Would appreciate a few models (not SLRs)