100% browser width in slideshow widget.

Hi,
Is there any way that I can have a slideshow of images at 100% of the browser width?
I tried to extend the borders of the slideshow to the grey area, but this does not work. That said,  white space on each side of the browser appears (see below)
Please somone help me!!!
K.

Hello,
I would like to inform you that 100% browser width does not work for Images. It is basically for Rectangles and text boxes.
As you are using images slideshow, I am afraid it might not work for you. A similar feature request is already logged here : http://forums.adobe.com/ideas/2108#comment-5612
I would suggest you to vote for it and add your valuable comments to it.
Regards,
Sachin

Similar Messages

  • When will 100% browser width work on widgets in Muse?

    Hi!
    I would love it if the widgets in Adobe Muse would work with 100% browser width, for example buttons! Is this going to happen in the nearest future?
    Best regards,
    Åsa

    Hi Asa,
    There are certain widgets that can be used with 100% browser width like the  'Menu widget' , The 'State Buttons' , The 'Slideshow Widget' etc . Please refer to this screenshot in case you are using the state buttons :- http://prntscr.com/52vszt
    Also, if you wish to see the 100% width option available for all muse widgets, I would request you to post this as a feature request here :- Ideas for features in Adobe Muse
    Regards,
    Rohit Nair

  • If Muse does not support responsive design, can someone tell me why I have seen 100% browser width

    If muse does not support responsive design (and therefore cannot adapt to the differing sizes in browser width of different devices, so I understand it) , as I have read on these forums and been told by Adobe's support tech's via chat support, can someone please explain how the 100% browser width slideshows that I have seen on Adobe's featured Site of the Day sites, were acheived? Are these sites only able to display correctly on the same size screen? If I cannot create a site in muse that displays a constant design on a laptop, desktop, or tablet screen, then why should I use this program at all, and why isn't that dislcaimer right up front to save folks like me hundreds of dollars in cloud subscription fees and hours designing a site only to find out that it will look like crap on 2 of the three devices any one uses to view it???? I was sent here for this question by the support team at Adobe. Hopefully someone has a workaround, because Adobe apparently are nonplussed.

    If muse does not support responsive design (and therefore cannot adapt to the differing sizes in browser width of different devices, so I understand it) , as I have read on these forums and been told by Adobe's support tech's via chat support, can someone please explain how the 100% browser width slideshows that I have seen on Adobe's featured Site of the Day sites, were acheived? Are these sites only able to display correctly on the same size screen? If I cannot create a site in muse that displays a constant design on a laptop, desktop, or tablet screen, then why should I use this program at all, and why isn't that dislcaimer right up front to save folks like me hundreds of dollars in cloud subscription fees and hours designing a site only to find out that it will look like crap on 2 of the three devices any one uses to view it???? I was sent here for this question by the support team at Adobe. Hopefully someone has a workaround, because Adobe apparently are nonplussed.

  • Can the 100% browser width function be used in non-master pages?

    Can the 100% browser width function be used in non-master pages? I watched the video about pulling it to the red edges, and did that on some of my parent pages, but when I preview the page in browser, it doesn't work. I can still see my browser edges.
    The idea for the website I am designing is to have different full browser width images for different pages, and I'm looking for a way to do that. I would create a different master for each page, but there are more than 20 pages...too many master pages! Thanks!

    Hi Lindsey,
    The 100% width feature works with rectangles and text frames on both master pages as well as regular pages. It doesn't work with images in either case. A possible workaround would be to use a rectangle with a background image, depending on the nature of your image.
    Regards,
    Nathan

  • BROWSER WIDTH SLIDESHOW on ADOBETV OR WHAT???

    So there seems to be much discrepancy over whether or not it's possible to create a full-size slideshow within MUSE. I recently watched Terry White's video on Parallax Scrolling and in the video was yet again another example of a full-screen slideshow:
    http://tv.adobe.com/watch/creative-cloud-for-design/discover-new-parallax-scrolling-with-a dobe-muse-cc/
    (i'm sure we've all seen many examples)
    Unfortunately.. I still can't get it to work.. So please.. somebody, please settle this for me.. Can I create a browser width slide show and if so, how on earth do I do it?

    Actually, there is no full screen slideshow in Terry's video. What is in Terry's video are a number of 100% browser width rectangles that contain background images that are set to "Scale to Fill". These are arranged in panels vertically as you scroll down on his one page site. Because they are within 100% browser width rectangles and set to "Scale to Fill" they will resize when the browser window is resized in width.
    That said, support for full browser window slideshows is a common request. While it is not among the new features in the June release, it is on our "To Do" list.
    Until there is native support in Muse, there are at least a couple approaches I've encountered for achieving, or simulating, a full browser window slideshow in Muse.
    1) Create a slideshow, send it to the back and pin it to the top center of the browser window.
    The hero images in the slideshow will be fixed size, so this is a simulation and a visitor on a Cinema Display will be able to resize the browser window wider than you'll likely want to set the width of the hero images, but this approach can be used effectively for some designs and is easily achieved fully within Muse.
    2) Leverage some degree of coding and manual uploading of files, along with a JavaScript library such as backstretch.
    This thread <http://forums.adobe.com/message/5325056#5325056> contains a customer discussion of how to achieve a full browser window slideshow using backstretch.

  • Muse 7.0 plus Chrome: browser does not show images full browser width

    Hi there,
    I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
    Of course I already restarted application and computer. System: Mac OSX Mavericks.
    What to do now? The presentation with the client is very soon and this bug makes me very nervous.
    Best,
    bartl

    The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
    As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
    That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
    If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
    Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
    I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
    On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

  • Right Side Red Line will not appear for full browser width.

    I had my top navigational bar set up to fill in a 100% browser width. Now, only the left side red line will appear and the right side will not work.
    http://waketestbykerry.businesscatalyst.com/index.html
    Any ideas on how to fix this?

    Ah, I understand now. Menus will stretch to 100% browser width in terms of any background applied to the top level Menu widget, but the actual items will not be stretched or fitted at the moment. I'd recommend adding that to our ideas section so that others can vote on it. It would also help if you clarify what you'd expect. Would you want the menu items to grow, or the space between them? And what would you expect if one of the menu items became too long for the container? Should the text wrap, or should it not be able to get smaller than that?

  • Please make it easier to position images in height and have them adapt to browser width!

    Maybe I'm missing a method but I have now long enough stumbled on something I would think obvious to exist within the program.
    I just want a highres intro image to pop up. i want to position it a bit down from the vertical center, but it should fill out left and right.
    1. Tried using slide shows, but Lightbox won't autostart without clicking thumbnails first. Only fullscreen lightbox has this ability for some unexplicable reason. Please make the non fullres lightbox available for immediate popup without having to click thumbnail.
    2. Tried using background browser fill. Works to a degree, but I can't control the image's vertical position.
    3. Tried using a 100 % width box and fill it with my highres image. But this wont work for this utterly strange reason:
    If I use a 960 px page width as my template, create a box 100% width, I try filling it with my image and tell it to scale to fill. But here's the bummer: If I resize my browser window to accomodate a 2560 px wide screen - my highres image was shredded when I assigned it to fill the 960 px wide box. It's looking a disaster at 2560 resolution. Please allow the image fill to retain it's original size and be able to rescale to smaller sizes instead.
    Because downward scaling doesn't seem to work in fills.
    So to boil it down: I want to be able to make a box and set it to 100 % browser width in the entry box, not having to graphically drag it out to whatever page width I'm currently using in Muse. I should be able to fill it with an image of any size, without Muse making any decision and downsampling my image, making it unusable for 100 % width display on high resolutions.
    Please consider this!
    T

    >@Ian Lyons: I can't drag the panels but the scroll-wheel on my mouse works fine...far better than it did in LR1.
    Agree--when LR is on the main display, but the scroll wheel does NOT work for scrolling the panels when LR is on the 2nd display. I don't know if this is intentional or an oversight or just a situation I experience, but I have experienced it with all versions of LR and in both XP and Vista.
    Note that the scrolling of the side panels isn't the only thing that doesn't work properly with the scroll wheel when LR is on the 2nd display--the thumbnail panel doesn't scroll when on the 2nd display, either. However, using the scroll wheel to adjust brush sizes works fine on either display as does scrolling the thumbnails in the Grid view.

  • Image won't adjust to browser width

    Hi,
    I have placed an image in the footer of my master page. In design view it spans from left to right of the browser, but in preview it no longer fills the browser. What can I do to make sure it does?
    - When placing the image I made sure it hit the red lines of both left and right browser edges.
    - I made sure "footer item" was selected (this doesn't seem to make a difference either way)
    - I have tried both "fill to frame" and "fit to frame" options
    Here is what it looks like in design view:
    And here is how it turns out in preview:

    Hi
    Have you placed the image and stretched it for 100% width or you have used rectangle fill with 100% browser width ?
    Can you please try with a rectangle fill with 100% width ?
    Also does it works when you select scale to fill ?
    If still same, please select the footer item with fill options open and upload a screenshot.
    Thanks,
    Sanjit

  • How do I set elements so they adjust according to browser width

    Hi Everyone
    I'm tryingto to make images/graphic elements on my website adjust to the browser width and always be centralised like this website http://pixelblue.ca
    Anyone know how to do this?
    Thanks
    Chris

    That is correct. Currently Muse allows you to create 100% browser width items with Rectangles & Text Frames.
    Muse Can :
    - have 100% browser width colored strip (using Rectangle)
    - have 100% browser width text (using Text Frame)
    - have 100% browser width image (using Rectangle & setting fill to image and setting fitting to Scale to Fill)
    NOTE : the key to this is to Snap it to the Browser Edge.
    select your Rectangle or Text Frame
    click the left edge or your Rectangle or Text Frame
    drag it out to the edge of your Browser Fill area on your design surface
    make sure you see the red line at the edge of your Browser Fill area to indicate you've snapped it to the edge
    do this for the right edge of your Rectangle or Text Frame
    you need to do this with both your left & right edge to make it 100% browser width
    Once you've done the above - preview your page.
    Hope this helps.

  • Design for Flexible Browser Width | Adobe Muse Feature Tour | Adobe TV

    For full control over your design, you can set elements to display at 100% browser width so the design adapts to the size of the browser window.
    http://adobe.ly/I5cONQ

    I placed a box (with the rectangle tool) tiled it with a png. but when I stretch it out I don't get a red line indicating I am at the end of the browser.  Am I doing something wrong?

  • Can you pin a horizontal menu widget to the sides of the browser so it resizes with browser width?

    Any ideas how I recreate the auto re-sizing of the horizontal menu bar depending on the size of the browser using muse that I've seen on the following site that I presume wasn't developed on Muse? http://www.thechequersbath.com/
    So far I've put a slideshow widget at 100% width, which creates the fixed slideshow in the background. I would love the menu to work in a similar way. Do I have to create a tablet version of it or what? Thanks for any feedback.

    Any ideas how I recreate the auto re-sizing of the horizontal menu bar depending on the size of the browser using muse that I've seen on the following site that I presume wasn't developed on Muse? http://www.thechequersbath.com/
    So far I've put a slideshow widget at 100% width, which creates the fixed slideshow in the background. I would love the menu to work in a similar way. Do I have to create a tablet version of it or what? Thanks for any feedback.

  • Lightbox image 100% browser height or width

    Hello everybody,
    I am new here but I have a question regarding the lightbox. I am searching for a way to show an image in a lightbox that presents the image 100% browser height or width. The lightbox in muse only can show an image in native format. So if the image is too large for the height or width of the browser, the image will be cropped.
    Is there a widget or another way to make the image scale in a lightbox with the browser height and width?
    I hope someone could help me with this.

    You can use any other slide show with full width as because lightbox will show the original image centrally on screen.
    Thanks,
    Sanjit

  • 100 percent browser width draw problem in IE10

    When I draw a rectangle at 100 percent browser width, in IE10 when I resize the browser window the rectangle will flash on and off until I stop resizing the browser. This does not happen in Chrome , any suggestions?

    No,
    I try to explain better:
    In my real application (not this simple example) I compose an image by the union of many little gifs. Then I have to save the result in a unique image. It's for this that I've overridden paintComponent(), so , after having painted all gifs, I save composite image to a png one.
    This function is activated from a main application, and I don't want to show too much to user, so I try to make this by using a popup frame that disappear quickly.
    I hope to having been as clear as possible.
    I hope to have chosen the best solution too
    Bye and thanks
    Edited by: giuseppe_italiano on Nov 21, 2007 3:35 AM

  • Slideshow widget works in the live view but doesnt in actual browser. help!!!!

    slideshow widget works in the live view but doesnt in actual browser. help!!!!

    By "doesn't work in actual browsers" do you mean while using Preview in Browser, or have you uploaded the page and it's not working?
    If it's not working after being uploaded, make sure all of the supporting files have been uploaded (.js and .css) as well.
    If it's not working in PIB, is it with all browsers, or just certian ones?
    Can you post a link to the malfunctioning page?

Maybe you are looking for