100% CPU after connecting with RDP
Hi,
We have a W2K3 SP2 vmware guest server running in our network. It's a member server. It has only Lotus domino installed.
But since last week that after connecting via RDP (doesn't matter to connect to console or any session) or with vwware console that the server CPU peaks 100% and don't allow connecting nor working with it.
We have to force shutdown from ESXi host.
Does anybody know what could be the cause.
Thanks,
Hi,
You may need to use Task Manager, Resource Monitor or Process Explorer to check which process causes 100% CPU usage.
Thanks.
Jeremy Wu
TechNet Community Support
Similar Messages
-
Device button no longer appears in iTunes after connecting with USB cable
Since updating software to OUS 7.0.4 my device buttton no longer appears in the iTunes window after connecting with USB cable
Problem solved. I needed to reinstall my Apple Mobile Driver. I found the solution on this web site.
iOS: Device not recognized in iTunes for Windows http://support.apple.com/kb/YS1538
After I reinstalled the driver, my iPohne immediately synchronized with my computer. -
I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: anganaYou don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it. -
My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?
Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock -
I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kadertry it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged -
Why is atv slow to buffer after connecting with cat5 cable
Why is atv slow to buffer after connecting with cat5 cable
Update on some things I have tried
As I am not sure the cause, I have been reading and trying different things, last thing was to set the interfaces to Duplex Full
I did this on both the Ethernet ports on the routers, and both of the Fast Ethernet ports being used on the switch, but has not changed the speed that PC1 is getting.
Also turned on CEF on both routers -
Password failure after connecting with Desktop software
Hi everyone,
I recently installed the BB desktopsoftware on my MacBook Air and today tried to sync my BB.
My BB is password protected (4 digits) and the Air is also password protected.
Problem is; the desktop software started after connecting with the BB, a password prompt came up and I typed the device password --> wrong password message!!
What did I do wrong?
Should I typ the MacBook password?
Please help !!
I stand to lose a lot of information, as this is my first back-up/sync.
Thanks.Hi everyone,
I recently installed the BB desktopsoftware on my MacBook Air and today tried to sync my BB.
My BB is password protected (4 digits) and the Air is also password protected.
Problem is; the desktop software started after connecting with the BB, a password prompt came up and I typed the device password --> wrong password message!!
What did I do wrong?
Should I typ the MacBook password?
Please help !!
I stand to lose a lot of information, as this is my first back-up/sync.
Thanks. -
HT4623 How to use epson iprint after connected with iPad help
How to use epson iprint after connected with iPad help.
When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).
-
E71x not vibrate after connected with PC Suite
Anyone has the same problem? My E71x purchased 2 days ago does not vibrate while and after connected with PC Suite. I had to turn off and turn it back on to activate the vibrating thing.
Thanksmmm... ill describe the whole situation:
phone has 2 days old
I connected it to the PC
Running PC SUITE
All was functioning normal, i had about half charge
i got a phone call from my gf, when i picked up the call, i disconnected the phone
the line dropped dead. so did the phone
i tried to restart it to no avail
i plugged it to the pc, didnt work
i removed the batter, didnt work
so i connected it to the power cord, and the lights turned on
i disconnected then tried to boot it up, and didnt work
i reconnected the power cord and started it while on external power, and it did start, showing just 1 little bar of battery.
I left it there for about 1hr and removed it, and charge was FULL
i reconnected to PC and im monitoring it and it hasn't discharged
so its weird... <.<
my guess is that unlike HTC or Sony Ericsson phones, the data cable and hte power cable CAN be connected at the SAME TIME. that would be the only explanaition on why it doenst charge up on the USB (but ohter theory of mine is that if i connect it to the PC on file trnasfer mode, it might charge it) -
ReportCrash using over 100% cpu after opening photoshop cs6
Currently running Mavericks on my macbook pro & just started noticing a problem. I'm sure its been there for a while, judging by past performance of photoshop, but just now caught it in activity monitor.
After I launch photoshop CS6, AM automatically shows ReportCrash as using upwards of 100% cpu, which explains why my computer seems to be dying when i'm working in the program.
As far as I could get with this problem on my own is checking concole to see what might be causing the process to appear. Not sure how to fix the problem though, which is why I come to the forums seeking guidance!
thanks in advance for any help!Same thing is happening to me. Seems like it started about a week ago, fan is running a whole lot now. I'm not saying it's the cause but the "top" utility shows /System/Library/CoreServices/ReportCrash running at 103% - 105%. Weird.
Changes: In the past 10 days Software Update delivered new versions of OS X 10.9.2 and iTunes 11.1.5, and I installed and ran DiskAid 6.5.3 and evasi0n7-mac-1.0.7. Also, Chrome began to hang several times a day in the past week so I removed it and re-installed it, which seems to have solved that problem.
Anybody else hearing the fan a lot and seeing these 100%+ utilitizations lately? -
Explorer.exe consuming 100% CPU after resuming from hibernation
Hello,
For the last months, I repeatedly have the problem that sometimes (every 2nd or 3rd time) after resuming from hibernation, in a few cases also after disconnecting from the Internet, one or more instances of explorer.exe are consuming 100% CPU, but never
the shell instance.
I tried figuring out what it was doing, but I was unsuccessful so far.
Here is a stack of the thread which consumed most of the CPU:
0, ntoskrnl.exe!KiDeliverApc+0x166
1, ntoskrnl.exe!KiSwapThread+0x31f
2, ntoskrnl.exe!KiCommitThreadWait+0x129
3, ntoskrnl.exe!ExpWaitForResource+0x29f
4, ntoskrnl.exe!ExEnterPriorityRegionAndAcquireResourceExclusive+0x1ad
5, win32k.sys!EnterCritAvoidingDitHitTestHazard+0x13
6, win32k.sys!NtUserMessageCall+0x28
7, ntoskrnl.exe!KiSystemServiceCopyEnd+0x13
8, user32.dll!NtUserMessageCall+0xa
9, user32.dll!SendMessageWorker+0x168
10, user32.dll!SendMessageW+0xfb
11, ExplorerFrame.dll!CNscTree::_TreeInvalidateItemInfo+0xd0
12, ExplorerFrame.dll!CNscTree::_EnumBackgroundDone+0xb4a14
13, ExplorerFrame.dll!CNscTree::OnQIUpdateEnumDone+0x93
14, ExplorerFrame.dll!CNscEnumQueueItem::Dispatch+0xcf
15, ExplorerFrame.dll!CTaskLock::DispatchQueueItem+0xc5
16, ExplorerFrame.dll!CNscTree::_SubClassTreeWndProc+0x118
17, ExplorerFrame.dll!CNscTree::s_SubClassTreeWndProc+0x5f
18, comctl32.dll!CallNextSubclassProc+0xe0
19, comctl32.dll!MasterSubclassProc+0xa2
20, user32.dll!UserCallWinProcCheckWow+0x149
21, user32.dll!DispatchMessageWorker+0x1a7
22, AppVEntSubsystems64.dll!VirtualizeCurrentThread+0x1e492
23, ExplorerFrame.dll!CExplorerFrame::FrameMessagePump+0xe3
24, ExplorerFrame.dll!BrowserThreadProc+0x5e
25, ExplorerFrame.dll!BrowserNewThreadProc+0x3a
26, ExplorerFrame.dll!CExplorerTask::InternalResumeRT+0x12
27, ExplorerFrame.dll!CRunnableTask::Run+0x114
28, shell32.dll!CShellTaskThread::ThreadProc+0x2a3
29, shell32.dll!CShellTaskThread::s_ThreadProc+0x2f
30, SHCore.dll!StrRetToBSTR+0x19f
31, kernel32.dll!BaseThreadInitThunk+0x22
32, ntdll.dll!RtlUserThreadStart+0x34
I was hoping I could identify a rogue shell extension or something similar, but I didn't find any such evidence so far.
In case you need this information, this is a list of my shell extensions/copy hooks/context menu handlers/drag&drop handlers (without duplicates):
+ " SkyDrivePro1 (ErrorConflict)" "Microsoft OneDrive for Business Extensions" "Microsoft Corporation" "c:\program files\microsoft office 15\root\vfs\programfilesx64\microsoft office\office15\grooveex.dll" "12.11.2014 01:13"
+ "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl.dll" "20.09.2013 12:50"
+ "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl_x64.dll" "20.09.2013 12:41"
+ "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip32.dll" "18.04.2011 19:34"
+ "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip.dll" "18.04.2011 19:35"
+ "ANotepad++64" "ShellHandler for Notepad++ (64 bit)" "" "c:\program files (x86)\notepad++\nppshell_06.dll" "12.05.2014 10:49"
+ "Ath_CopyHook" "Bluetooth File Transfer Plugin" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\folderviewimpl.dll" "25.09.2013 10:58"
+ "Atheros" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\btvappext.dll" "25.09.2013 10:58"
+ "DropboxExt" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext64.24.dll" "24.06.2014 01:32"
+ "DropboxExt1" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext.24.dll" "24.06.2014 01:31"
+ "FTShellContext" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\shellcontextext.dll" "25.09.2013 10:58"
+ "GDContextMenu" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\contextmenu64.dll" "16.01.2015 01:57"
+ "GDriveBlacklistedOverlay" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\googledrivesync64.dll" "16.01.2015 01:56"
+ "igfxcui" "igfxpph Module" "Intel Corporation" "c:\windows\system32\igfxpph.dll" "09.09.2013 18:26"
+ "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext32.dll" "25.03.2009 08:53"
+ "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext64.dll" "28.04.2009 10:21"
+ "PDF Shell Extension" "PDF Shell Extension" "Adobe Systems, Inc." "c:\program files (x86)\common files\adobe\acrobat\activex\pdfshell.dll" "11.05.2013 10:34"
+ "PushbulletCtx" "" "" "File not found: :/Program Files (x86)/Pushbullet/pushbullet_ctx.DLL" ""
+ "RecuvaShellExt" "Recuva shell extensions" "Piriform Ltd" "c:\program files\recuva\recuvashell64.dll" "14.03.2014 12:41"
+ "SD360" "360 Total Security" "" "c:\program files (x86)\360\total security\menuex64.dll" "12.01.2015 03:55"
+ "SourceGearDiffMergeShellExtension32" "SourceGear DiffMerge ShellExtension 32" "SourceGear LLC" "c:\program files (x86)\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension32.dll" "23.10.2013 19:15"
+ "SourceGearDiffMergeShellExtension64" "SourceGear DiffMerge ShellExtension 64" "SourceGear LLC" "c:\program files\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension64.dll" "23.10.2013 19:17"
+ "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\syswow64\startmenuhelper32.dll" "20.04.2014 18:17"
+ "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\system32\startmenuhelper64.dll" "20.04.2014 18:16"
+ "WinRAR32" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext32.dll" "02.12.2014 11:07"
+ "WinRAR" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext.dll" "02.12.2014 11:07"
+ "WinSCPCopyHook" "Drag&Drop shell extension for WinSCP (64-bit)" "Martin Prikryl" "c:\program files (x86)\winscp\dragext64.dll" "14.08.2013 12:22"
I you have any clue what might be going, I would be very happy to hear it. It's really annoying, as I have to kill explorer.exe and thereby close all my folder windows when this happens.
Thank you!
Best regards,
David TrappHello,
thanks for having a look. However, I already ran SFC before posting on this forum (as part of my own investigation) and it came back clean. RescueTime (a time tracking tool) is probably not the culprit because it happened also several times in the past without
RescueTime being running (that was because I had accidentally removed it from autorun at that time).
Unfortunately, I can't follow your "invalid date" explanation. I don't think an "invalid date" is anywhere involved; in fact, the method in question is called "_TreeInvalidateItemInfo" and not "_TreeInvalidDateItemInfo"
(note that there is only one "d"), so I assume its job is just to invalidate (and in turn, refresh) the cached information about nodes in the left pane's folder tree of the explorer window(s) - since the folder tree is the only NamespaceTreeControl
(whose corresponding class name is CNscTree) in explorer folder view windows. As I see it, something is causing explorer to repeatedly refresh the folder tree data, but I am stuck at finding out what exactly.
Best regards,
David Trapp
EDIT: Disassembling ExplorerFrame!CNscTree::_TreeInvalidateItemInfo confirms that, because it seems to call TreeView_SetItem for a tree node and its parent (possibly with all fields set to *_CALLBACK), and CNscTree::_UpdateItemDisplayInfo
for the parent node.
EDIT2: I'd love to dig more into the trace, however I am hitting a wall at function names/addresses. Everywhere where I would expect a function name/address (such as the "by stack" views), I only see question marks instead. What
could be the reason? -
DVI to s-video adapter altering laptop display after connection with TV
Greetings,
I recently got my MacBook Pro to display on my TV via the dvi to s-video adapter (also connected stereo sound). Everything works great, but ... after I disconnect the windows on several of my programs are altered (stretched, shortened, often relocated offscreen or very near off-screen). My ical window refused to display at all. I trashed the ical preference file in the Library, restarted the program and I could see the window again. I'm going to be connecting with my TV a lot. It will be a pain to have to trash preferences files after every connect. Anyone know what's going on?
Thanks,
Sigi
MacBook Pro Mac OS X (10.4.6)
MacBook Pro Mac OS X (10.4.6)What happens if you quit all those applications prior to making the connection to the TV? I would think that should prevent the windows from dynamically resizing. But they are still going to have to resize if you open those apps while connected to the TV.
Mac OS is trying to keep the open windows completely on the desktop. Since your TV's screen is likely much smaller (in pixels) than the 1680 x 1050 pixels of the MBP, the windows are being shrunk and in some cases repositioned so they fit on the desktop when connected to the TV. Unfortunately, the previous settings are forgotten and not restored when you disconnect. -
After connect with Itunes, choosing restore, then all the photos lost.
I bought a New Iphone5 and using it to took some photos.
then I connect with Itunes which provide me two options, I choosed the retore. after restore, all the photo lost. what can i do.It can not do that all by itself.
When you plugged it in, iTunes said 'Oh goody! You got a new phone! Would you like to make it just like your old phone?'...
You explicitly said 'Yes'.
You can't undo that.
No backup of the current state of the new phone was made. It was wiped and the last backup of your old phone was restored to it.
Anything you had on the new phone is gone. -
Emagent runs at 100% cpu after update to CPU #5225798
good day all ...
we updated to patch 5225798 today on our 10g2 system and now emagent runs at 100% cpu:
top
top - 16:30:39 up 50 days, 2:56, 6 users, load average: 1.00, 1.00, 1.00
Tasks: 174 total, 2 running, 172 sleeping, 0 stopped, 0 zombie
Cpu(s): 25.5% us, 24.5% sy, 0.0% ni, 49.9% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 8143004k total, 2928336k used, 5214668k free, 250212k buffers
Swap: 8514440k total, 3848k used, 8510592k free, 1948680k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4144 oracle 25 0 73052 10m 5420 R 99.6 0.1 49:58.40 emagent
the database is 10.2.0.1.0. any idea what is up with this? the emagent.log file has very little in it:
cat emagent.log
2006-08-31 15:40:29 Thread-16384 Starting Agent 10.1.0.4.1 from /opt/oracle/product/10gR2 (00701)
2006-08-31 15:41:30 Thread-16384 target {prod, oracle_database} is broken: cannot compute dynamic properties in time. (00155)
2006-08-31 15:41:30 Thread-16384 EMAgent started successfully (00702)hmmm ... apparently no way to attache a file with oracle's forum software. anyway, here is the emagent.trc.
cat emagent.trc
2006-08-31 15:40:29 Thread-16384 WARN command: Job Subsystem Timeout set at 600 seconds
2006-08-31 15:40:29 Thread-16384 WARN upload: Upload manager has no Failure script: disabled
2006-08-31 15:40:29 Thread-16384 WARN upload: Recovering left over xml files in upload directory
2006-08-31 15:40:29 Thread-16384 WARN upload: Recovered 57 left over xml files in upload directory
2006-08-31 15:40:30 Thread-16384 WARN metadata: Metric Disk_Path does not have any data columns
2006-08-31 15:40:30 Thread-16384 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2006-08-31 15:41:30 Thread-16384 ERROR TargetManager: TIMEOUT when compute dynamic properties for target prod
2006-08-31 15:41:30 Thread-16384 ERROR TargetManager: target {prod, oracle_database} is broken: cannot compute dynamic properties in time.
2006-08-31 15:41:30 Thread-16384 WARN collector: the column name DiskActivityavwait in this condition does not exist
2006-08-31 15:41:30 Thread-180231 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
2006-09-01 03:42:38 Thread-29982743 ERROR scheduler: Collection oracle_emd:chinstrap.ornl.gov:3938:Response has not finished in 721 minutes (allowed: 720).
Exiting agent.
2006-09-01 03:42:38 Thread-29982743 ERROR : Signalled to Exit with status 3
2006-09-01 03:42:38 Thread-16384 ERROR main: EMAgent abnormal terminating
2006-09-01 03:42:59 Thread-16384 WARN command: Job Subsystem Timeout set at 600 seconds
2006-09-01 03:42:59 Thread-16384 WARN upload: Upload manager has no Failure script: disabled
2006-09-01 03:42:59 Thread-16384 WARN upload: Recovering left over xml files in upload directory
2006-09-01 03:42:59 Thread-16384 WARN upload: Recovered 60 left over xml files in upload directory
2006-09-01 03:42:59 Thread-16384 WARN metadata: Metric Disk_Path does not have any data columns
2006-09-01 03:42:59 Thread-16384 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2006-09-01 03:44:00 Thread-16384 ERROR TargetManager: TIMEOUT when compute dynamic properties for target prod
2006-09-01 03:44:00 Thread-16384 ERROR TargetManager: target {prod, oracle_database} is broken: cannot compute dynamic properties in time.
2006-09-01 03:44:00 Thread-16384 WARN collector: the column name DiskActivityavwait in this condition does not exist
2006-09-01 03:44:00 Thread-163845 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds. -
AddressBookManag 100% CPU after 10.5.8 update
After I installed I noticed that this process was consuming nearly 100% of CPU capacity.
Restarting and logging into a "clean" admin user did not show this but logging in under my own user showed the activity appearing after a few minutes.
Address Book is set to open at login and I use MobileMe with automatic syncing.
Turning off mobile me automatic synchronisation did not do anything however if I unplugged my ethernet cable (cutting off my network connection) the AddressBookManag stopped.
Setting it too manual stops it recurring but do a manual sync creates the problem again.
I am currently behind a corporate proxy however and the interaction between this and Mobileme I think this is the problem but I don't recall this occurring with 10.5.7. Essentially AddressBookManag should recognise it is failing to connect and not simply run wild will it fails to connect.
If I disconnect my macbook from the company network and use my iphone for internet tethering there is no problem.Hi, Roger.
I've noticed this behaviour as well and it goes back to before 10.5.8. Generally it goes away after a bit. My guess is that AddressBookManager is actually busy doing some housekeeping.
You could try deleting ~/Library/Application Support/Address Book/ABPerson.index which should result in a rebuilding of the Address Book database the next time you search for an entry.
Maybe you are looking for
-
On my iphone4 I need to be able to receive and send both TDS and Yahoo e-mail accounts (I also need to access from my Macbook Pro and my HP desktop). I have NO problem with Yahoo, but with TDS, the e-mail seemed to work on my phone.... and then it d
-
Report - Want to know the maximum length of a character Data Type.
Hello, I have to print some details which is having more than 500 characters. Is it possible to create a variable or workarea with more than 256 characters? Please help me. Its very urgent. My actual requirement is to pass this workarea to sma
-
Add Backspace function to PL/SQL button
Hello, I am implementing a POS interface in oracle forms 6i and I am confused upon how to create the backspace function on a pl/sql button. I have added these to the WHEN-BUTTON-PRESSED trigger: SELECT substr(:system.current_item, 1, (LENGTH(:system.
-
How to drag and drop file between maximized windows in Awesome WM ?
Hello, I am newbie to awesome WM. I am a web developer and usually need to edit files after downloading from FTP. I am using filezilla for FTP and sulblime text 2 for coding. How can I drag file from filezilla and drop into sublime window for editing
-
Hi I was trying to build an app using JBuilder personal. It would build and run fine. Then i realised that i could not use the api from jdk1.4 as JBuilder would only work with jdk1.3. So, i moved the project from JBuilder to Forte thinking that Forte