100% cpu time on application but not vi
I am trying to build an application but I am running into a problem i have not seen before. I have a vi that uses 3 while loops simultaneously. It works fine when i run it on my developing machine as a vi, but as soon as i make it an application my cpu usage goes to 100%. It still functions, but obviously the pc is doing to much work. Any ideas on why this is happening? Labview 7.0
If possible, place your VIs here, and our enthusiasts here will be able to help you
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Similar Messages
-
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it. -
I tried to add this in the topic already open but it kept sending me through the unending rabbit holes!
My question is: How do I figure out what release I was on, get rid of this one and got back to a functional firefox that moves in realtime. I already did all the reset and etc.... I just want to go back to the speed I had. This halting , hanging up misery of a browzer is Sad. I have had firefox for years and always recommended it ..... BUT NOT ANY MORE. I agree with the other poster ... there should be a rollback feature. Peoples time has value and right now FireFox is sucking the value down a rabbit hole.
See Below Comment Feedback submitted before I finally got here:
This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ago and it slowed down..... but the latest update before I did the reset really slowed me down. I came here to fix it a couple of dayz ago and did the reset firefox and now it IS RUNNING SO POORLY AND SLOW I AM ABOUT TO KILL IT OFF MY MACHINE!!! Yes that is me yelling - and it happened in SSSSSSSSSSSSS LLLLLLLLL OOOOOOOO WWWWWWWWWW Motion. I have run all the security scans and cleanups ---this needs a fix ASAP!!! PS: The hang ups and slowness is EVERYWHERE I go. I only get speed doing programs not connected to ON LINE.Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.
also this takes huge amount of time, almost 10 hours to download, even using 3G Net connection.Hi kiwirudy,
I've had the same problem more than once since I started trying to download my 14 April purchase of OS X Mountain Lion.
I found a property list called manifest.plist in my ~/Library/Application Support/AppStore folder which had a Boolean property called failed checked. I unchecked it and afterwards I was able to resume my download.
Here are some steps I've found useful:
Close the Mac App Store.
make a copy of the ~/Library/Application Support/AppStore folder. For some strange reason the Mac App Store likes to just delete it in some circumstances, which will mean that one has to start one's download again from the very beginning.
Double click on the manifest.plist in one's ~/Library/Application Support/AppStore folder.
This should open it in Property List Editor.
Expand all the nodes (holding down the alt key and clicking on the highest collapsed node should do it.
Find a key called failed of type Boolean and uncheck it.
Save the manifest.plist and close it.
Open the Mac App Store.
The red message "an error has occured" should now be gone and one should be able to resume one's download.
In the event that the ~/Library/Application Support/AppStore folder gets deleted:
start the download again (it will start from the beginning), pause it and close the Mac App Store.
copy your backup copy of the pkg file back to its sub-folder (it's a numbered folder in the ~/Library/Application Support/AppStore folder).
Open the Mac App Store and resume your download.
It should continue from where it left off.
This has worked for me so far. I'm holding my breath. Don't know if I'll still be alive when it's finished.
Regards
Nic
Message was edited by: n c h -
Interesting little app that gives 100% CPU time to your app of choice.
Hi All,
I saw this cool little app that basically shuts down all other non essential processes and gives 100% CPU time to the app of choice. It is called Freeze Frame. Thought it might be worth a look, with all the overloads and all ..... PS - I am not affiliated with this company whatsoever.
http://www.elgebar.com/freezeframe.html
Regards,
Petergbrits wrote:
I'm sorry if I explained myself incorrectly. If I were allowed to post the code I would have done so already. I didn't ask you to post your code. I asked you to post structurally similar code that exhibits similar behavior.
I was hoping to get some pointers 'in abstracto' as to what generally may lead to such behavior (i.e not utilizing 100%). Unfortunately, there are about a snotzillion things that could cause the situation you describe. As already pointed out, all we can offer are random guesses, and that's not a productive use of anybody's time.
Perhaps my question was indeed to broad.Yup.
I'll get back to it with a more concrete simplified code example if I can . Excellent. -
How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?
How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted. -
I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it
Move your content to a new Mac - Apple Support
-
Why would code work for an application but not an applet?
Hey there,
i'm trying to build a java ftp upload applet. I'm using the enterprisedt ftp class.
The code works fine when i run it as an application but not when i put it in the applet. The applet has been signed and is running off a plug in. I get no error messages, just nothing happens.
Would really appreciate some comments.
regards
hagen
the code
FTPClient ftp = new FTPClient("****");
ftp.login("user1", "***");
ftp.put("C:/INSTALL.log","test.log");hi
im a manuel, from argentina
i would appreciate too much if you can give me that piece of code
i need for a site, an applet that could read files the visitor chosse from his pc and then upload that files to a server
is it possible?? you could help me ?
i think i need to sing my applet alright? how i do this? how it cost??
if anyone can give my a bit of code, to star�t programming, ill be very happy!
thanks!
mi mail: [email protected] -
I've set up the Apple TV and both the TV & Mac have the same network but I just can't get the Mac content on the TV. It did work the first time I tried but not now. No Air Play Mirroring devices detected. I've reset everything but still no joy - any ideas?
Disable any security software on the computer.
Reboot the computer and the Apple TV. -
When I run as root or normal User
zenity --notification --text="test"
The zenity process takes 100% Cpu time
System:
Arch 32bit gnome 2.22
Last edited by brickwedde.eu (2008-05-06 11:26:00)I GOT IT... I think.
zenity --notification actually calls libnotify! I was trying out a script and suddenly realized something, because by chance dbus decided to take a break. Take a look at these two code fragments.
$ zenity --info --text "hello"
$ _
$ zenity --notification --text "hello"
libnotify-Message: Unable to get session bus: Failed to connect to socket /tmp/dbus-jmMdFXbznS: Connection refused
<hang>
<100% CPU usage>
I've figured out why: it's basic socket programming gone wrong. The notification part of zenity calls libnotify, tries to connect to libnotify's socket, and fails, using 100% CPU waiting for the connection to... end a stream that never started.
A possible solution is to just use notify-send.
-dav7
Last edited by dav7 (2008-05-09 00:27:30) -
Why is FF sucking up so much CPU time & Why can I not preform a search on FAQ's?
Why is FF sucking up so much CPU time &
Why can I not preform a search on FAQ's?
FF is sucking up way too much CPU time from 30 to 98% for great/long periods of time on a Sony Vaio laptop platform running P4 CPU w/XP prof w/SP3 & 2Gb RAM.
Why can I not preform a search on FAQ's so that might not have repeat a question that might have been asked previously?
Searching 24xx pages is not my idea of how to spend precious time to find an answer that I am looking for.Safe mode or turning off the plugins does not work with this bug. If they are still installed firefox will open plugincontainer, the plugins need to be uninstalled or disabled at OS level.
"''clearing Cookies will start an instance of plugin-container for almost all of the plugins installed on the system, regardless of enable/disable state for each one.''" -
I am trying to figure out the best way to get CPU times for our
application to do certain things. It sits on top of a database and
I wanted to separate out what the database time and the application
time is. I was going to use the 3C clock function to get a start
time and then a time right before the database call and then a time
when it comes back. It seems like the granularity of the clock function
may not be what I need. Anyone have any ideas on how to do this? Is
this the best way?
Thanks
JohnThis is a hard question to answer because it depends on the cluster agent/application.
On one hand you may have a simple Sun Cluster application that fails over in seconds because it has to do a limited amount of work (umount here, mount there, plumb network interface, etc) to actually failover.
On the other hand these operations may, depending on the application, take longer than another application due to the very nature of that application.
An Apache web server failover may take 10-15 seconds but an Oracle failover may take longer. There are many variables that control what happens from the time that a node failure is detected to the time that an application appears on another cluster node.
If the failover time is 30 minutes I would ask your vendor why that is exactly.
Not in a confrontational way but a 'I don't get how this is high availability' since the assumption is that up to 30 minutes could elapse from the time that your application goes down to it coming back on another node.
A better solution might be a different application vendor (I know, I know) or a scalable application that can run on more than one cluster node at a time.
The logic with the scalable approach is that if a failover takes 30 minutes or so to complete it (failover) becomes an expensive operation so I would rather that my application can use multiple nodes at once rather than eat a 30 minute failover if one node dies in a two node cluster:
serverA > 30 minute failover > serverB
seems to be less desirable than
serverA, serverB, serverC, etc concurrently providing access to the application so that failover only happens when we get down to a handful of nodes
Either one is probably more desirable than having an application outage(?) -
Hello. I'm currently running a new, up-to-the-minute Arch 64-bit installation, but Xorg is consuming 100% of my CPU time.
#1) My Hardware:
Gateway 614GE desktop tower
MSI-6741 motherboard with Via/S3 Graphics Unicrome Pro IGP (disabled)
AMD Athlon64 Processor 3400+ (single-core @ 2.4 GHz)
2.0 GiB DDR ram
Sapphire ATi RadeonHD 3650 AGP
#2) My Software:
Arch Linux 64-bit (duh)
Kernel 2.6.31.4-1
Xorg 1.6.4 RC1
Mesa 7.5.1-2
Ati-Dri 7.5.1-2
Xf86-Video-Ati 6.12.99 (built from git yesterday)
Gnome 2.28.0
#3) My Xorg.conf :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri2"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "GWY"
ModelName "8b1b"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
Option "AGPMode" "8"
Option "AGPFastWrite" "True"
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "True"
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
Option "RenderAccel" "True"
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
Option "AccelMethod" "EXA"
Option "DRI" "True"
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV635 PRO AGP [Radeon HD 3650]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Everything on my system looks like it is running in a slideshow at 3 or 4 frames per second. Pretty much everything is being software-rendered, I guess. I know that my ATi card cannot accelerate OpenGL untill kernel 2.6.32 comes out (at least not out-of-the-box) but I *know* it is capable of EXA, Xv, and Xrender. On both my Ubuntu 9.04 install and my previous Arch install, Xorg stayed at ~5% CPU usage. I'd kindly like some assistance in why nothing is being accelerated.
Thanks.#4) My Xorg.0.log :
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux darkfire_fox 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 22 19:17:18 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9596:1787:0028 ATI Technologies Inc RV635 PRO AGP [Radeon HD 3650] rev 0, Mem @ 0xb0000000/268435456, 0xcfef0000/65536, I/O @ 0x0000b800/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 6.12.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[54] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[55] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[56] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[57] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[58] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[59] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) [KMS] drm report modesetting isn't supported.
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[41] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[42] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[43] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[44] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[45] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[46] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[47] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[48] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[49] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[50] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[51] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[52] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[53] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[54] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[55] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[56] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[57] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[58] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[59] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[60] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[61] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[62] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[63] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[64] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEON(0): TOTO SAYS 00000000cfef0000
(II) RADEON(0): MMIO registers at 0x00000000cfef0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "8"
(**) RADEON(0): Option "AGPFastWrite" "True"
(**) RADEON(0): Option "ColorTiling" "True"
(**) RADEON(0): Option "RenderAccel" "True"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "True"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3650 AGP" (ChipID = 0x9596)
(--) RADEON(0): Linear framebuffer at 0x00000000b0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1787 SubsystemID: 0x0028
IOBaseAddress: 0xb800
Filename: SE525SAM.008
BIOS Bootup Message: RV635 GDDR2_32MX16 128BIT 512MB 725E/400M
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 725000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
(II) RADEON(0): Output DVI-1 using monitor section Monitor0
(II) RADEON(0): I2C bus "DVI-1" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: DVI-1
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e50
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT1: INTERNAL_KLDSCP_DAC1
DFP2: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e40
(II) RADEON(0): I2C device "DVI-1:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Output DVI-1 disconnected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1024x768
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[37] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[38] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[39] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[40] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[41] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[42] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[43] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[44] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[45] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[46] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[47] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[48] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[49] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[50] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[51] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[52] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[53] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[54] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[55] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[56] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[57] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[58] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[59] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[60] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[61] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[62] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[63] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[64] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEON(0): RADEONScreenInit b0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
mc fb loc is 00cf00b0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x20000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1024x768 - 1376 808 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
before 9450
after 9450
freq: 94500000
best_freq: 94500000
best_feedback_div: 70
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 10
(II) RADEON(0): crtc(0) Clock: mode 94500, PLL 94500
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x46(70), fracfbdiv 0, pdiv 10
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1024x768 - 1376 808 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
before 9450
after 9450
freq: 94500000
best_freq: 94500000
best_feedback_div: 70
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 10
(II) RADEON(0): crtc(0) Clock: mode 94500, PLL 94500
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x46(70), fracfbdiv 0, pdiv 10
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 320 x 240
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS2++ Logitech TrackMan
(**) PS2++ Logitech TrackMan: always reports core events
(**) PS2++ Logitech TrackMan: Device: "/dev/input/event6"
(II) PS2++ Logitech TrackMan: Found 3 mouse buttons
(II) PS2++ Logitech TrackMan: Found x and y relative axes
(II) PS2++ Logitech TrackMan: Found scroll wheel(s)
(II) PS2++ Logitech TrackMan: Configuring as mouse
(**) PS2++ Logitech TrackMan: YAxisMapping: buttons 4 and 5
(**) PS2++ Logitech TrackMan: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS2++ Logitech TrackMan" (type: MOUSE)
(**) PS2++ Logitech TrackMan: (accel) keeping acceleration scheme 1
(**) PS2++ Logitech TrackMan: (accel) filter chain progression: 2.00
(**) PS2++ Logitech TrackMan: (accel) filter stage 0: 20.00 ms
(**) PS2++ Logitech TrackMan: (accel) set acceleration profile 0
(II) PS2++ Logitech TrackMan: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1068 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1068 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
Dac detection success
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID vendor "GWY", prod id 35611
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1068 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: GWY Model: 8b1b Serial#: 37107
(II) RADEON(0): Year: 2004 Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) RADEON(0): Gamma: 2.98
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) RADEON(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 94.5 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 320 x 240 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1068 v_border: 0
(II) RADEON(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) RADEON(0): Serial No: MRH4A50037107
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ef91b8bf3900000
(II) RADEON(0): 2c0e0103082018c6ea5c119e59479b27
(II) RADEON(0): 10484fa14a0031594559456861598180
(II) RADEON(0): 010101010101ea240060410028303060
(II) RADEON(0): 130040f01000001e302a009851002c40
(II) RADEON(0): 3070130040f01000001e000000fd0032
(II) RADEON(0): a01e460b000a202020202020000000ff
(II) RADEON(0): 004d5248344135303033373130370041
(II) RADEON(0): EDID vendor "GWY", prod id 35611
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1280x1024 - 1688 1068 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00b0 0x00cf00b0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
before 10800
after 10800
freq: 108000000
best_freq: 108000000
best_feedback_div: 72
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 9
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x48(72), fracfbdiv 0, pdiv 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success -
Discount Condition with effect at the time of GR but not at the time of PO
Dear All
My customer requires a discount condition in a particular pricing procedure. He want the discount condition in such a way that it should be shown in PO conditions but it should not affect the net price while making purchase order. Rather it should be deducted at the time of GR.
For example: i am making a PO for a material with net price 305Rs and discount given by the vendor is 5Rs per unit. In the PO discount condition should appear with 5Rs per KG/Litre/etc. But the PO net price should remain 305 instead of 300.
Now when i am making a Goods Receipt at that time the discount should be calculated on the net price 305 and material should be loaded with price 300.
Kindly help me to resolve the issue by suggesting some feasible options.
Thank you.Dear Sandesh
i want a discount condition type (Quantity wise i.e. 5 Rs/Liter) which will not affect the PO net price i.e. net rpice remains same irrespective of the discount condition value. Discount should be applicable at the time of GR i.e in material should be loaded with price after discount.
For Ex: if the discount entered in PO is 5 Rs/Liter
PO Amount: Quantity (100) * Net price (105) = 10500 (should not include the discount at the time of PO)
GR amount: Quantity (100) * Net price (105-5=100) = 10000 (should include the discount at the time of GR)
Hope you understand the issue. -
Genius updating taking 100%+ CPU time and error 13011
Does anyone else have the issue of iTunes updating Genius causing their CPU usage to max out run the cooling fan at full speed?
Im getting an average of 100%+ CPU usage while its updating or compiling or whatever its doing and Macbook cooks whiles its doing so.
Activity Monitor is reporting ridiculously high CPU usage. How do you even get 108% CPU usage?? Can someone explain that for me?
Im also getting the message 'unable to save library' with error 13011 at the end of Genius updating (the Genius update progress bar is full).
Can anyone give me some pointers as to what I can do to check why i'm getting these issues or if there is resolution?
Killing the Genius data gathering solves the CPU usage issue straight away but I'm sure it wasnt this bad before Snow Leopard.
Cheers
AChere is a log of the console messages relating to itunes if that helps anyone...
11/09/09 8:22:24 AM [0x0-0x1cd1cd].com.apple.iTunes[4459] objc[4459]: Class DOMHTMLParamElement is implemented in both /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore and /Library/InputManagers/SafariBlock/SafariBlock.bundle/Contents/MacOS/SafariBloc k. One of the two will be used. Which one is undefined.
11/09/09 8:22:24 AM [0x0-0x1cd1cd].com.apple.iTunes[4459] objc[4459]: Class WebBaseNetscapePluginView is implemented in both /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit and /Library/InputManagers/SafariBlock/SafariBlock.bundle/Contents/MacOS/SafariBloc k. One of the two will be used. Which one is undefined.
11/09/09 8:22:26 AM Firewall[65] iTunes is listening from 0.0.0.0:3689 proto=6
11/09/09 8:22:27 AM Firewall[65] iTunes is listening from :::3689 proto=6
11/09/09 8:22:27 AM [0x0-0x1cd1cd].com.apple.iTunes[4459] Child process initialized.
11/09/09 8:22:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[4459] dnssd_clientstub read_all(49) failed -1/4 9 Bad file descriptor
11/09/09 8:22:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[4459] dnssd_clientstub read_all(49) failed -1/4 9 Bad file descriptor
11/09/09 8:22:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[4459] dnssd_clientstub read_all(45) failed -1/4 9 Bad file descriptor
11/09/09 8:22:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[4459] dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x1a808680 FFFF0004 DDDDDDDD
11/09/09 8:22:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[4459] dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x1a8025a0 00000000 80000000
11/09/09 8:22:28 AM /Applications/iTunes.app/Contents/MacOS/iTunes[4459] dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x1a8025e0 00000001 18B96E00
Maybe you are looking for
-
System Crashes, Unable to open System Accounts
Hi and thanks for having a look at my topic. I've had this issue for quite a while but was worried that my fix would be complicated and take a while so haven't tackled this yet. Issues: 1. periodically (1 every 6 days or so) my Mac crashes -doesn't s
-
File Adapter Question in SOA 11g
Hello, just started with this soa stuff and looks like it can be very useful, i have a question: i am doing a SyncRead within a bpel process and want the file is not necessarily there as soon as that process runs, so if it doesnt find it i want it to
-
Displaying full sql error text?
I'm using getErrorCode() and getMessage() to display the following for an sql error SQL error: SQLCODE: -551, SQLSTATE: 42501, SQLERRMC: auth-id ;operation;object-name The SQLERRMC only has the auth-id, operation and object-name. How do I build this
-
LONG STANDING PHOTO PROBLEMS - PLEASE, PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!
have had my 30g 5thG iPod for almost a year and I have NEVER managed to load any photos. Someone on this forum suggested I created a small file with just a couple of photos in and synch that to the iPod, rather than trying to load a whole bunch. No s
-
Force an error against an order when creating a Distributed Sales Order...
We're raising Distributed Sales Orders via IDOC (Type ORDERS05). There are however certain bueiness checks (which probably should be made at the order level but are not) being checked for by the IDOC processing code. When certain checks fail I need t