100% CPU usage. RV180W Firmware Version 1.0.2.6

Since I updated to Firmware Version 1.0.2.6 cpu usage shows 100% with no sing of lowering.
So since 2 days now its always runngin at full speeds for no reason.
Firmware Update, Factory Reset, Setup as before. => 100% CPU
Is this a common problem? Is there any fix for that? Or at least a way to get informations what causes this?
Kind reagards
bartlingja

Hi, we can try something, please download the firmware thru this link, and install it again, then configure just the necessary configuration. If the issue continues, could you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

Queue consumer stops with 100% cpu usage

I'm trying to use Berkeley DB queue with transactions. When I tested what happens when transactions with DB_APPEND are aborted I found that while it works and DB_CONSUME correctly skips over rolled back records, unfortunately extents that have those records are never deleted, which causes database to always grow. Next I tried DB_CONSUME with database opened using DB_INORDER flag and it seems there's a serious regression in Berkeley DB that causes it to loop indefinitely with 100% cpu usage when it encounters a rolled back record. I tested various versions and found that this bug doesn't happen with 5.1.29, but it is reproducible with 5.2.42, so this regression might have been introduced in 5.2. I have also tested 5.3 and 6.0, and both have this behavior. There may be something wrong with the way queue records are rolled back, one indication of that would be that in 5.1.29 doesn't have neither of the two problems I found with DB_QUEUE: extents are deleted after being consumed, and there are no issues when consuming with DB_INORDER either.
You can find Python code to reproduce this issue here:
https://gist.github.com/snaury/027a3c546f5b0a62a440
Sorry for using Python and not e.g. C++, but it's a lot shorter that way.

We have looked at the issues and they are valid. We will roll the fixes out for this in our next release of BDB. The test case was very useful and really helped to speed the process up. If you have any questions, please contact me directly at [email protected] Thanks again for bringing this to our attention.
thanks
mike

Distiller 8 and 9 both locking up, 100 % CPU usage

Not sure if its related, but probably, since it happened right after...I just transferred everything from my quad core mac pro to my new 8-core Mac Pro. Everything went well, but now Distiller 8 starts and then sits and gives the beachball of death, and one of the cores shows 100% cpu usage. (I have that utility that shows memory used, CPU usage, etc.). I hadn't bought Acrobat 9 yet so I downloaded it and installed, and Distiller 9 does the EXACT same thing. The ONLY thing I can call an "error message" is that I can see in the window after it launches is "Error in /Library/Application Support/Adobe PDF/Settings/PDFX4 2007.joboptions:/CheckCompliance out of Range."
That message may have been there whole time, even when it worked, though. I don't know. At any rate, I need distiller working! Any ideas?

Glad to hear all is well. Preference files can cause big problems. Eons
ago, in the 1980s, I used a communications program called Red Ryder. I
loved the program. After it was updated to a new version (it might have
been called White Knight by that time), I started to have terrible
problems. I wrote to their technical support. They couldn't duplicate
the problem. It couldn't happen etc. I eventually got a little hot under
the collar. After all, if I couldn't use my modem, I couldn't check my
email, etc. It turned out to be a problem with my preference file when
converted to the latest version, that was causing the problem. Since
they always started with a new preference file, they couldn't duplicate
the problem that was obvious to me.
...Mike

100% CPU Usage caused by HMI

Hi everybody:
I'm working with LabVIEW DSC 8.2.1 in a system that monitors many variables of a plant, such a typical SCADA system. For this reason, the use of the graphic tools is highly used on the development of this system. Everything works fine, but I have only one problem.... the usage of the CPU.
When I am working on the development system I (not the executable) I start the application and after the variables are initialized and every process has started and are running , the CPU usage is raised around 90 - 100%. After a few days investigating the reason of this, I realized thay when I change the view on the screen to another view, for example the block diagram of the application, while the application is still running, the CPU usage goes around 15 - 25%. I've tried these many times changing the view from Front panel to Block Diagram and viceversa and the result is always the same: Front Panel= around 100%; Block diagram or another view (other applications MMIs, or Block Diagrams, etc.)= around 20%.
Another thing that I realized is that the other view (different to front panel) has to fill the entire screen to work the way I'm telling before.
When I build and run the executable, the usage of the CPU is the same... (around 100%), but I can't see any other application, because the application built is the shell of the OS, so no other views are available.
I don't know if there's some other consideration to take into account about the HMI when creating an application, and I'll appreciate very much your help.
Thanks in advance!
Ignacio von Unger

From http://100cpuusage.blogspot.com/
100 Percent CPU Usage when you run programs after you install Windows XP Service Pack 2
CPU Usage 100% Symptoms
When you run some programs, the CPU Usage meter in Task Manager may indicate CPU Usage 100%. When CPU utilization reaches 100 percent, programs will run very slowly or stop responding (hang) and your computer is freezing or crashing.
Noteress CTRL+ALT+DEL to view CPU utilization, click Task Manager, and then click the Performance tab.
These symptoms occur after you install Microsoft Windows XP Service Pack 2 (SP2).
CPU Usage 100% Cause
These problem occurs because of the user interface code that is included in Windows XP SP2. The high CPU utilization is caused by the additional overhead that occurs when the IsWindow function is called by the user interface code.
RESOLUTION
Hotfix information
A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next service pack that contains this hotfix.
To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:
http://go.microsoft.com/?linkid=6294451
Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
Prerequisites
To apply this hotfix, you must have Windows XP SP2 installed.
Restart requirement
You must restart the computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace any other hotfixes.
File information
The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel. Date Time Version Size File name
30-Mar-2005 19:53 5.1.2600.2643 577,024 User32.dll
30-Mar-2005 01:30 5.1.2600.2643 1,836,544 Win32k.sys
if you still do not know how to Fix CPU Usage 100%?
I suggest you try targeted software - registry cleaner to fix cpu usage 100%
Because there are many cases causing high cpu utilization.
1. If you do a lot of web surfing and are concerned about spyware, adware infecting your machine, they will cause system crashes and CPU utilization reaches 100 percent. Some good registry cleaner has the function of spyware & adware removal.
2. You install many beta version of the software, Drivers are not certified, which resulted in many errors, you get high cpu usage.
3.100% CPU Usage while you use Internet Explorer
4. many unneed Startup Program.
5.Others PC Errors. - DLL errors, runtime errors, Windows-Installer Errors, Windows Startup Errors,paths Broken DLLs, OCX, and ActiveX Components all will cause 100% cpu usage. Your PC will run very slowly.
Registry cleaner can do a complete scan of your entire file system and registry in under 2 minutes! Fix High Cpu Usage. Improve PC Speed By Up to 70%!
http://www.100-cpu-usage.com/ suggest you to download registry cleaner to fix 100% cpu usage too.
PCErrorsfixer.com - Top 3 Windows Registry Cleaners, Improve PC Performance,5 Star Rated. Fix 100% CPU Usage, Runtime Error, DLL Error,Windows Startup Errors,Internet Explorer Errors, Speed Up your slow PC.

100% CPU usage... does anyone else get this?

Here is my code. I would have simplidied it for you... but I honestly have no idea where it went wrong.
One second it is running fine, the next it starts taking up 100% of my CPU cycles. I can't figure out what I did to it to make it do this... nothing I added creates an infinite loop or infinite threads. It's just... weird.
The code is probably too big for anyone to look at and tell me what's wrong, but can someone else download it and tell me if you also get 100% CPU usage? It needs to be run on Windows... it uses a couple JNI calls that are Windows-specific. Those calls were the first place I looked when trying to find the problem, but I have not changed that part of the code for a long time, and it has never been a problem before.
Don't run the bat file... just navigate to the Watchdog2 directory and do 'java Watchdog'.
Are there any tools that can help me figure out where the program is getting hung up? It's not freezing at any specific spot... just moving super slow and taking up 100% of my CPU. I'm so confused...
Message was edited by:
L4E_WakaMol-King

Nevermind!
Sorry for the trouble. The problem was that last time I compiled the code, it reverted back to and older version of a class I had compiled days ago. Why it did this is totally beyond me... but it did, and it just so happens that the old version of that class combined with the new version of my program were the perfect recipe for an infinite loop.
Seriously, if you are in inveterate debugger, you might get a good laugh out of this. I've spent the last week and a half trying to find a way to set the Windows console into cbreak mode (single character processing rather than line-at-a-time processing), and I finally managed to do it by writing some c code and putting it into a DLL with the JNI. So now my program (which runs from the console) can process each character as it is entered rather than waiting for a line return. The older version of the class that got reverted was one that used System.in rather than the input stream generated by the socket. I had set it to System.in for testing purposes, and apparently that testing version is the one it got reverted back to. So combine the two, and you have a console that is feeding System.in each character as it is pressed and a socket wrapper that is listening infinitely. It was a mess... but an uncannily serindipitous mess...
Ahh... debugging... good time...

Windows98 100% cpu usage, any fix?

Hi,
Any fix available for the 100% cpu usage problem in Windows 98, or do we have to wait untill 8.1.7 for Win98 and hope that it works in that version?
regards,

This issue can be caused by confliction from one of the background programs. You may troubleshoot in Clean Boot Mode.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135
However if the issue persists in Clean Boot Mode, I suggest you click the Start Button, All Programs, Accessories, System Tools, and then click Internet Explorer (No Add-ons). If the issue does not reoccur, it may be caused by an IE Add-on. In that
case, let’s continue to perform the following steps to narrow down the cause.
Check Internet Explorer Add-Ons
=========================
1. Click Tools, and then click Internet Options.
2. Click the "Programs" tab, and then click Manage Add-ons.
3. Select an add-on in the Name list, and then click Disable.
4. Restart IE with Add-ons and check the issue again.
If the issue is resolved, the disabled Add-on was the cause of the issue. If the issue reoccurs, continue to disable the next Add-on using the same method.
By doing so, we could determine which Add-on contributed to the issue.
If it does not help, please reset IE and see if it works.
How to reset Internet Explorer settings
http://support.microsoft.com/kb/923737
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

My laptop (win7 2ghz, 1gig) has 100% cpu usage with itunes installed (even when not running itunes) since the upgrade. i had to uninstall. tried installing but still the same problem. my daughter wants the new ipad, but this is a serious problem.

when itunes upgraded my laptop went to 100% cpu usage. only solution was uninstall. have tried itunes again as my daughter wants the new ipad. still same problem tho so not keen to spend £400 on new pad without pc support. anyone help? (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

HP LaserJet Pro MFP M127fn - DNS issue, hundreds of UDP connections affects my router 100% CPU usage

Hi all,
We've bought about ten pieces (HP LaserJet Pro MFP M127fn), tested only one the other 9 are waiting for their time to be sent in our branch offices. The MFP works fine, no complains till later that day I noticed that our Mikrotik Router was struguling with high CPU usage, it took me some time to find the issue and it was the new bought MFP. Don't know why but it creates hundreds of UDP connections and almost 100% CPU usage goes to DNS service. As soon as I shutdown the MFP and delete all the connections everything goes back to normal. I've disabled almost all services (HP web service, Ipv6, SNMP, AirPrint, SLP, LPD, WS-Discovery, Bonjour), leaving only Ipv4 but without luck the issue persists. Here are some print screens confirming my saying:
http://i.imgur.com/UiOPSiu.jpg
http://i.imgur.com/dlgObPb.jpg
http://i.imgur.com/4RmQhot.jpg
http://i.imgur.com/oBuo9UO.jpg
http://i.imgur.com/Zf77V6b.jpg
Don't know if it is the same case but it look like, found this post that ha no answer to the issue: http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/New-HP-LaserJet-Pro-MFP-M127fw-network-...
Why does this happen? And how to solve my issue? Thank you in advance.

Hi @EugenX ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this Post has instructions.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problem:100 % cpu usage with tcp server dll

Hello,
I am trying to write a dll with labwindows/cvi that allows me to create a TCP Server. This dll is integrated in labview.I created this Dll with example provides by Labwindows/cvi(rtserver.dll).
Description of my problem: when i execute this dll in a "While Loop" in labview,the TCp server wait a connection and 100% cpu usage occurs. However when a client is connect to the server,the CPU is normaly used because the program stop when he meets the timeout of the tcpread() function. I would like to know how i could limit CPU usage when the server is awaiting a client in the labview "While loop".
I know I could use a DELAY() to limit Cpu usage ,but I would like to know if there are any others solutions.
thank you.

i dont know your exact application, but i generally use Q to transfer data to TCP loop in my prgram it helps me in two ways.
1. it automatically restricts the iteration when ther is no data (Less CPU Usage, Less Unnecessary Trafic)
2. Q can eliminate problems arising due to non synchronization of loop
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

100% CPU usage with XP Cooler from PCAlert4

Any idea why I would be running 100% cpu usage when running XP Cooler from PCAlert4? I noticed PC was sluggish when running it so CTRL+ALT+DEL and under performance is 100% CPU with 245MB Ram Usage. No other TSR's running - several application but under 10% CPU usage without PCAlert and XP Cooler.
I was also wondering if anyone had any ideas on the video? I have the K7N2G with 768MB DDR PC 2100 (3x256) XP2200+ 266FSB running 1804MHz - Maxtor 30GB 7200RPM - 350W PSU (raidmax - yea yea I know, dont say a word though LOL) on board video and here is the problem - graphics are great, but they get choppy - running NFS HotPursuit 2 at 32bit 800x600 (doesnt seem to matter even when running 16bit 640x480still does it.) what setting am I missing? Thanks in advance.

Deathstalker (Richard),
I did what you suggest in memory management and also changed out the mem on the board - it did make a difference, not as much as I had hoped, but it did.
Raven,
I have used Fraps in the past, forgot about it, but went ahead and downloaded it to get a better look.
To the Both of you,
Thanks so much for your replies, sometimes it just takes someone outside looking in to see the things overlooked. But I went ahead and also ran all of the latest updates for the board (semi new system and I only installed with the CD that came with the Mobo) and everything is running better than expected. Thanks again for your thoughts - keep 'em flowin, it's amazing whom we could help. Take care.
Don

Music store & 100% CPU usage

I've had this problem on my newly built computer, and my older machine. When I browse the iTunes music store, the status bar on the top will often move like it's opening the music store, but it'll do this for a long period of time (several minutes) and iTunes will work, but the music store will not load, and you cannot click the 'X' to stop the contacting of the music store. During this time if you open task manager, iTunes uses 100% of CPU resources. If you close iTunes it still uses 100%. you have to end the process in task manager in order to make it stop. On occasion the music store will work to view maybe one album, but if you search for another album, or click another link it'll do the whole not-responding-100% CPU usage cycle again.
All drivers are up to date and like I said it's done this on two seperate computers of mine on the same iTunes account. I also have a laptop and the music store works completely fine on it. It's only on my desktops that I have this issue.
Some specs on my machine if this will help
Asus motherboard
AMD Athlon XP 4000+ processor
2gb Kingston 184 pin DDR ram
Seagate SATA II 160 GB HD
Windows XP PRO service pack 2
thanks for your help!

I'm only guessing here, but perhaps iTunes is having a conflict with another application. If you are anything like me you probably install your favourite applications on all your computers. As a shortcut to troubleshooting, perhaps consider an application you have installed on the desktops, but NOT on the laptop. Then try uninstalling that application from your desktop computer and test iTunes.
HP Compaq dx6120 P4 2.8 GHz 1GB RAM (BABYJANE) Windows XP iPod : 5G 30GB (BLANCHE)

100% CPU usage by iCal

For some reason my iCal application uses 100% of CPU. What can I do to avoid it?

I had a similar problem with iTunes.
Here's the link to what fixed my problem immediately. Please note: my problem was resolved following just the three steps pasted below. The original link has additional steps that may be necessary, although I did not employ them, and my problem of 100% CPU USAGE is gone!!! Thank God!
URL source: http://www.hotcomm.com/faq/FAQ_ResetWinsock.asp
Good Luck
Copyright (c) 2009 1stWorks Corporation. All rights reserved.
This article gives instructions for resetting Winsock on Windows XP and Windows Vista:
Reset Winsock (Vista)
To reset Winsock in Vista:
1.Click the Windows Start button.
2. Type Cmd in the Start Search text box and press Ctrl-Shift-Enter (keyboard shortcut to run Command Prompt as Administrator). Click Continue to allow elevation request.
3. Type netsh winsock reset in the Command Prompt shell, and then press the Enter key.
URL source: http://www.hotcomm.com/faq/FAQ_ResetWinsock.asp

Run program in 100% cpu usage

hi all,
does any body know how to set the java program to utilize 100% cpu usage? thanks!

class Empty implements Runnable {
    Empty() {}
    public void run() {
        while(true) {}
    public static void main(String[] arg) {
        new Thread(new Empty()).start();
        new Thread(new Empty()).start();
        new Thread(new Empty()).start();
        new Thread(new Empty()).start();
}Not sure why you would want to do this though?

Copying from USB NTFS device with Dolphin (KDE) causes 100% CPU usage

I am copying +/- 30 GB of Music files (flac) from my external USB HDD which is formatted as NTFS.
I have installed ntfs-3g and am experiencing near 100% CPU usage. What's wrong?
Additional info: I am using KDE and initiated the copying through dolphin. KDE's system monitor only shows CPU usage near 100%, but no processes in the process view could be responsable.
Thanks!

What mount options are used for that ntfs drive?
Edit: There are many similar threads but I couldn't find a solution other than trying out some kernel and cpufrequtils fun.
Last edited by karol (2011-01-16 18:12:15)

[10.1.2] Protected Mode causing 100% CPU Usage/Extra Processes on Win XP 32-bit?

Hello,
I'm not 100% sure if the two are related, but I have a client who was seeing 100% CPU usage using Adobe Acrobat Reader X 10.1.2 on Windows XP 32-bit and Firefox 11. The acrord32.exe process would hang around after closing the main window and eventually leading to tons of processes and his CPU at 100% use. I believe disabling Protected Mode may have solved this issue. I didn't see it documented anywhere so I figure I'd post about it here and see if anyone else was seeing this resolved as well.

I noticed 'only' 50 % CPU usage. Not during Reader usage with ~ 20 %, but it started after closing main window.
Two instances of acrord32.exe were created - the moment pdf was opened - of which one was using zero CPU.
After opening another pdf, 2 more processes were created, so 4 in total. Have seen 2 of them using 100 %.
Issue is easily recreated.
This is all in 10.1.3, no fix from Adobe, only THE fix from you: turning of Protected Mode!
After which now only one proces is created, with 1 to 3 pdf documents opened at same time.
This instance is then nicely shutdown after the last pfd is closed.

Shockwave Flash 11.6.602.168 100% CPU usage

Hi,
Our computer has 100% CPU usage every time we get in websites that utilize Flash, or watch youtube.
Browser: FF 19.0
Flash 11.6.602.168
Computer: HP Pentium 4, 2.8 GHz, 3G memory, up-to-date BIOS and other drivers.
Graphic card: EVGA GeFprce 6200
Windows 7 32 bits
This window is freshly installed, has AVG on. We do not have many software's installed, except MS Office. All fans and CPU are clean. The computer runs fairly fast: we tried opening multiple FF tabs simultaneously, plus Excel, Word, Solitaire etc. without any problems. However, whenever we get into websites with Flash, the CPU uasage goes to 100% and stays there. Memory usage has always been stable, around 30%. We have tried the following steps, but it hasn't gotten better:
- Turned off all applications, opened only one tab with that website.
- Updated all drivers and applications: FF, Flash, Graphic card etc.
- Turned ON and OFF hardware acceleration for both Flash and FF, also tried to turn one On, the other OFF, and vise versa.
- Disabled all add-on's, extensions and Plug-in's, except Flash.
- Uninstalled and reinstall FF and Flash; restarted several times.
- Temporarily turned OFF protected mode.
- Uninstalled FF, Flash, then installed IE 9, then Flash for IE: didn't work.
- Uninstalled IE 9, Flash, then installed IE10 then reinstalled Flash for IE: also didn't work.
- We do not keep browsing history.
Examples of websites that we have had problems with: pbskids.org, barbie.com, and other school websites for kids to do homework or watch youtube.
While in many websites such as CNN.com, yahoo.com, when we opened it, the CPU usage did spike, but came back to 1-5% within 5 seconds.
This computer is for our kids. Do we really need to buy an i5 or i7 computer so the kids can play and do homework? Or is there any other way that we can do?
Thank you

Moving to the Using Flash Player forum, as this isn't specific to the Beta.
In the Youtube video, if you right-click and choose Show Video Info, it will show you whether you're using Hardware Acceleration for both Video Rendering and Video Decoding.
If you're seeing Software Rendering and/or Software Decoding and you're watching a high-def video, it's going to use a ton of CPU.
Do you see similar behavior in other browsers? (Chrome, IE) The Flash Player distributions are actually quite different for each browser. It would be an interesting data point.

100% CPU usage. RV180W Firmware Version 1.0.2.6

Similar Messages

Maybe you are looking for