100% cpu usage when opening itunes or quicktime, please help!
every time i open itunes or quicktime my windows laptop centrino´s core jumps to 100%, even when the programs are idle!!
-i tried reinstalling them, manually removing any leftover program files and folders.
-Right-clicking on the QuickTime folder and clicking Delete from the shortcut menu.
-Navigate to C:\Windows\system32\.
-Remove the files QuickTime.qts and QuicktimeVR.qtx.
nothing works...
now i cant listen to music with only my batteries anymore!
windows media player ***** and the new version 11 is a lot worse, but it uses just about 10% of my processor.
thank you for your help!
gateway centrino mx6618m Windows XP
hi captain
actually i noticed the problem in the first place when cheching the task manager. 97% itunes 3% taskmanager.
i wish i could know what all those other tasks are and end them (some are obvious but other arent), but it wouldnt solve my problem.
still thank you
XP centrino laptop Windows XP
Similar Messages
-
Error message when opening itunes...please help
I recently tried to purchase music on the itunes store, and was told to do so I had to upgrade to itunes 7, which i had put off for quite a while...however, now that I have done so, I get a error that comes up each time I open iTunes, telling me a newer version of quicktime is required, despite the fact I HAVE that new version, and whenever I try to install a standalone version of the most recent quicktime, it tells me a newer version of quicktime is already installed.
Anyway, this is the error message: "QuickTime version 7.0d0 is installed, iTunes requires Quicktime version 7.1.3 or later. Please reinstall iTunes."
Whenever I try and install a non-standalone version of the newest iTunes, this doesn't seem to effect the situation so could anyone help? Would be appreiciated...thanks...i've just checked the Add/Remove programs list, and Quicktime doesn't appear to be on it.
okay, let's try a slightly different technique for swapping out the QuickTime that can get past those sorts of issues.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now? -
Server 2012 R2 100% cpu usage when using search
Hi all!
We are experiencing issues with the built in search in WS 2012R2 (Win+Q). Upon starting to type, the explorer.exe process peaks and stays at 100% until typing is done and the search is complete. It also can't keep up with typing and hangs after
a few keystrokes. We have done tests on 2012 R2, 2012 and 2008 R2 running as VMs with 1 cpu. The tests performed have been run on a host running only the test VM with underlying 2x8 core cpus, SSD, SAN storage and 256GB RAM. Also, we have tested
both Hyper-V and VMware ESXi 5.0. We see that if we add another CPU to the guest it alleviates the keystroke lagging, but the explorer.exe still consumes 100% cpu.
When the same tests are run on a physical machine (approx. same specs as the virtualization hosts) the cpu usage reaches 15-20% on one of the physical sockets (numa node). Totally negligible, but still a high number.
We are afraid of service impact and are keen to know if anyone else is experiencing the same? Maybe someone has a fix?Hi TrondWH,
Thanks for contacting Microsoft.
Currently, would you please try cleaning boot the server and test how the issue goes. Cleaning boot can exclude some third-party application affect. Following are the detailed steps about clean boot:
Log on to the computer by using an account that has administrator rights.
Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the
System Configuration Utility.
On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
Click OK, Choose Don’t show this message again and then click Restart.
Please check if the issue is still the same.
Please let me know the result.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
TS1717 i can't open iTunes. error 1712. please help
i can't open iTunes. error 1712. please help
http://www.ehmac.ca/all-ios-iphone-ipad-ipod-touch-apple-tv-itunes/98949-itunes- will-not-open-1712-a.html
This happened to me too. The secret was: it's already opened. But the application is not responding. I right-mouse clicked the icon on my dock and Force Quit it. Reopened it and done. -
I upgrade to iTunes 10.4.0.80. Since then iTunes uses 50% of the CPU and Mobile uses 50% CPU. I let it run for hours and the CPU usage stayed at 100%. The phone will partially sync but takes a very long time. This was not a problem before the iTunes upgrade. I am running iTunes on Windows XP professional SP3. It does not matter if the phone is connected to the USB port of the PC. When iTunes starts it runs the CPU at 100%.
Yes! I am not the only one with this problem. Ever since the latest iTunes update, the CPU runs up to 100% using both the mobiledevice and itunes itself. The store won't work either! I'm also on Windows XP. I too have tried everything I can think of but nothing has helped. I really hope they get an update out with fixes soon. This is really annoying!!
-
I have very high 100% CPU usage when I run itunes.
Normally I don't have any problems, but now when I start iTunes it eats up my CPUs. Any thoughts?
I am having this same problem. When running iTunes on my macbook pro, i notice my CPU usage is hovering around 94-97% constantly. Has anyone found out why?
-
Since 10.4.6 Update: "ATSServer" with high CPU-usage when opening PDFs
Since I've updated to 10.4.6 my system is very slow when I open PDFs (in "Preview" or "Acrobat").
This is caused by the process "ATSServer" which goes through every file in "~/Library/Fonts" (I have over 4.800 files there - but just a view are activated by "FontBook") and so it takes very high CPU-usage.
I didn't have this problem bevore the update and I didn't make any changes on my font settings.
I've cleaned the font cache, but it doesn't help.
Any ideas?
Ciao
Mephizo
PS: Excuse my poor English.
PowerBook G4 17'' 1.67 GHz Mac OS X (10.4.6)
PowerBook G4 17'' 1.67 GHz Mac OS X (10.4.6)I haven't noticed any change myself, Dan, but I have the 2 GHz model.
One thing I HAVE noticed though after OS updates is that they can often result in a fair amount of file and free space fragmentation immediately after installation. OSX's routines will deal with fragmentation of small files , but not of large ones (over 20 Meg), and it won't deal very effectively with free space fragmentation. If your HD is getting full this can cause significant slowdowns, especially where video is involved.
You should also run DiskUtility and check for any directory and permissions issues.
Cheers
Rod -
Error when opening Itunes and quicktime
when i try to open itunes it says
"itunes cannot run because it has detected a problem with your audio configuration"
when i try to open quicktime i get a runtime error.
i just downloaded and installed 7.3.1. what should i do now?This is usually a Quicktime problem. This Apple atricle usually fixes it.
http://docs.info.apple.com/article.html?artnum=304424 -
Bug!?! 100% CPU usage when referencing secured JARs in unsecured JNLP
hi,
i think i just found a bug in jws but i'm not sure yet. it would be nice if somebody can verify this before i create a bug report.
this is my JNLP file (test.jnlp):
<jnlp ...>
<information>
<title>Test</title>
<shortcut online="true">
<desktop/>
</shortcut>
</information>
<security>
<all-permissions/>
</security>
<update check="always" policy="always"/>
<resources>
<java version="1.6"/>
<jar href="jar/mySecuredJar.jar" download="eager" main="true"/>
</resources>
<application-desc main-class="test.MyTest"/>
</jnlp>this is the file structure on the server:
download/ // public folder
test.jnlp
jar/ // private folder secured via basic authentication
mySecuredJar.jarwhen i access the jnlp file for the first time via browser the jws login dialog opens asking me for credentials since test.jnlp internally references a jar that is in a secured area. while this jws dialog is open my cpu usage is normal - javaw.exe takes about 5%.
however, when i open my application for the 2nd time via desktop shortcut, the jws authentication dialog opens again (jws looks for updates of my jar before the application starts) and javaw.exe takes about 95% of my cpu as long as the dialog is open!!!
when i put the jnlp file in the secured area as well, everything works smoothly. however, this forces users to enter credentials in a browser authentication dialog (browser needs to access the secured jnlp) as well as in the above mentioned jws authentication dialog.
can anybody reproduce this? should i file a bug report?
i tested this on win xp with jre 1.6.0_11.
regards,
stephanPlease, [file |http://javafx.netbeans.org/issues/enter_bug.cgi?component=javafx] an issue on it.
-
100% CPU usage when writing to disk
Hi.
I have an Athlon XP 2000+ with 768 MB RAM, a SATA disk, formated to ntfs (running XP) and a IDE disk running Arch (ext3, KDE).
When I copy a big file, the CPU usage stucks to 100% . Doesn't matter the disk I write to or from. The CPU usage is always 100%.
My maximum writing speeds are:
ntfs-3g-->ext3 max ~30 MB/sec
ext3-->ext3 max ~28 MB/sec
ext3-->ntfs-3g max ~15MB/sec
ntfs-3g-->ntfs-3g max ~15 MB/sec
I understand that writing to ext3 is much faster because it is a native linux fs, but I cant understand why the high CPU usage.
While coping, ksysguard shows that the progress with the higher system% is kio_file when coping ext3-->ext3, or kio_file and ntfs-3g, when coping from or to a ntfs disk.
The problem is not with the CPU, in windows the writing speed is higher and the CPU usage is much lower. So I thing this is an Arch configuration problem but don't know where exactly to look. Searched the forum but didnt find any solution.
Any ideas? Anyone with similar problems?
Last edited by matersci (2007-09-09 22:37:00)with hdparm -I /dev/sda I get:
hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: Maxtor 6L200M0
Serial Number: L41ZFT2C
Firmware Revision: BACE1G10
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 0
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 398297088
device size with M = 1024*1024: 194481 MBytes
device size with M = 1000*1000: 203928 MBytes (203 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 192, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_VERIFY command
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* URG for READ_STREAM[_DMA]_EXT
* URG for WRITE_STREAM[_DMA]_EXT
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
It says ATA device, with non-removable media but this is a SATA disk!
Also,
# hdparm -t /dev/sda
/dev/sda:
Timing buffered disk reads: 166 MB in 3.01 seconds = 55.23 MB/sec (SATA Disk)
and
# hdparm -t /dev/hdb
/dev/hdb:
Timing buffered disk reads: 176 MB in 3.02 seconds = 58.26 MB/sec (IDE Disk)
hdprm says dma is on for the ide disk, but says nothing about dma for the SATA.
I think the problem is because the kernel recognize the SATA disk as IDE.
Last edited by matersci (2007-09-19 20:24:10) -
Problem with installing the new iTunes and quicktime PLEASE HELP!
whenever i try to install iTunes 7 i keep getting this popup message. it has something to do with quicktime. please reply with any suggessions!! thank you.
quicktime for windows
could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTimeP
ayerLib.QuickTimePlayerApp/CLSID. Verifly that you
have sufficient accesss to that key, or contact your
support personnel.I have the exact same problem. Running Windows XP. Can't download the latest version of quicktime. Tried uninstalling old version of itunes and think I lost my entire music library. Did anybody solve your problem?
whenever i try to install iTunes 7 i keep getting
this popup message. it has something to do with
quicktime. please reply with any suggessions!! thank
you.
quicktime for windows
could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTimeP
ayerLib.QuickTimePlayerApp/CLSID. Verifly that you
have sufficient accesss to that key, or contact your
support personnel. -
Maxed out CPU Usage, happens suddenly, no obvious cause, please help!
I've had an XServe-G5 running well for about 18 months, with anywhere from 2-5 active users at one time. The server is only running AFP, Software Update & FTP services.
For the last 2 months, without warning, the CPU usage will max out, with only a small amount of disk & lan access with it.
I've found a less than ideal solution . . . . the cpu max out seems to be linked to 1 or 2 users logged in at one time, but not always the same users, if these users disconnect then the CPU usage returns to normal. I haven't found a way to identify which user/users it is, so I disconnect them through 'Server Admin' one by one till I get a result.
This goes on up to 5 times a day. I've checked the AFP access log when the problem happens, but can't see anything there that isn't there normally, the error log has no events. When there are no users logged in, other than the local 'Admin', the problem does not occur.
We've resorted to only logging into the server when needed, but it's getting to be a major pain.
Please help!Many things can cause this. What do you see in "top"?
One example is when you hit the "corrupt .DS_Store" bug in AFP. See afp548.com for a discussion, e.g.:
http://www.afp548.com/article.php?story=20060329213629494
See also:
http://docs.info.apple.com/article.html?artnum=301711
russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u -
I am running Windows Vista Home Basic (32-Bit)
I have used iTunes for years, while owning various iPods and an iPhone 3g.
Today I bought an iPhone 4 and came home looking to immediately update to iOS 5, while installing I got this error:
After searching around, I decided to uninstall all Apple programs and reinstall starting at iTunes 9.
I also ran Windows update and everything is up to par.
I still recieve the same error, please help!what was the answer to work around this error message.. i am having the same problem trying to unistall quicktime..
thanks -
100% CPU usage when importing cd and downloading from store, please help!
I am using itunes 8.2.1.6. The problem is that whenever I import a cd or download any music from the store my cpu runs at 100%. I have a pentium 4 (which manages nicely with any other task, even importing cd's with another programe) with 3gb RAM.
Is anybody else having this problem? Does anybody know how to fix it?Mr. Bump
-
TS3074 "Error 7" message when opening iTunes. Can anyone help?
Has anyone been able to solve this problem? I have tried the solution offered by Apple to no avail. It's driving me to despair! i need to be able to get into iTunes because I have a iPod also.
Have you seen this ?
http://support.apple.com/kb/TS3074
If it has not helped follow this
http://support.apple.com/kb/HT1923
Maybe you are looking for
-
currently trying to flash my bios upto the current release to attempt to fix a problem that seems i am not the only one to have and have tried every other solution provided. Now i have flashed many a bios before but never this one....my current versi
-
Some songs that are synced onto my iPhone are missing album names. It's completely blank. I went back and double checked on my computer, and found that the album is all there in iTunes. Furthermore, the album artwork shows up on my iPhone. So somethi
-
Please, help with AS2 / CS3
In this zip file, I replaced the images, with blank photos, with the image titles, to make it easier to see the problem. (download files) http://www.pbsjbuzz.tv/site_flash/site_flash.zip (view online) http://www.pbsjbuzz.tv/site_flash Thank you ! Hel
-
Problems with nls_language
Hi, people! When I change the NLS_LANGUAGE registry key from US7ASCII to WE8ISO8859P1 Discoverer shows 2 folders with the same name, (one is uppercase and the other is lowercase). The folders' contents are different from each other. Any ideas? Thank
-
Question marks in email.
When I send email using the rich text setting, the receiving party sees "?" marks at the end of every line. Any ideas?