100 Mbps MPLS but service provider handing of gig fiber?

Our service provider is providing 100 Mbps MPLS service to one of our remote sites that will accept the handoff via a gig fiber connection into our 3845 router using a GLC-SX-MM SMF tranciever. I'm assuming that I will have to shape the ingress traffic to 100 Mbps. Can anybody send me a link on CCO that explains how to do this? And am I correct that I will have to shape the ingress traffic? Thanks, John

Hi,
Even though you have a fiber coming into your remote location your service provider would have rate limited it appropriately in and out from his perspective to 100MB as per the BW sold to you.
So from your question there should be no need to implement any policing in or out on your router towards the service provider.
HTH-Cheers,
Swaroop

Similar Messages

  • 3G speed drops, is it the iPad 2 or service provider?

    My connection sometimes drops to around 0,33 Mbps. My service provider tells me I should get around 1-6 Mbps, and suggest there might be something wrong with the iPad modem. Any ideas?

    The thing is I have measured 6.004 mbit and 0,3 on the same spot. The carrier tells me that under 1 mbit is not normal. They want me to travel to another city to see if I have the same difficulties there. But one thing I wonder is there any known problems relating to the one I have?
    And thanks for your swift reply!

  • I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

    I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
    On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
    I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

    WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
    Your CPU, which is not that powerful in your case
    Your I/O sub-system, which is likely a single HDD on your laptop
    The source footage. What is your source footage?
    Any Effects added to that footage. Do you have any Effects?
    Each of those will have an impact on the time required.
    The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
    Good luck,
    Hunt

  • Best practice MPLS design/configuration for small service provider

    We are a small regional service provider and did not have MPLS supported on our network.  To start supporting MPLS, I’d like to get opinions and recommendations on the best practice configuration. 
    Here is what we have today –
    We have our own BGP AS and multiple /24s.
    We are running OSPF on the Cores and BGP on the Edge routers peering with ISPs.
    We peer with multiple tier-1 ISPs for internet traffic. We do not provide public transit.
    What we want for phase one MPLS implementation –
    Configure basic MPLS /vpn functionality.
    No QoS optimization required for phase 1.
    We have Cisco ME 3600X for  PE. Any recommendations will be appreciated.

    Not sure what kind of devices or routers you have in your network but looks for if you have support for labeled multicast for MVPN support. That will avoid other complexity of using other control protocols (like PIM) in core.
    PE redundancy can be obtained by BGP attributes, CE-PE connectivity can be tunned using IGP or VRRP/HSRP...
    You can have mutiple RSVP TEs for various contract traffic and you can bind various kind of traffic to different RSVP Tunnels based on contract or service with your customer.
    RSVP-TE with link/node protection design will be of great help to achieve quicker failover.

  • I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost?

    I am using iPhone 4 from the last one year and went dead and got it replaced by paying Rs.12500/- to Nyasa Sion Koliwada Mumbai Service Provider but now again after 38days the problem has started, what do i do? Is this is the quality & service we boost? On visiting the store we get only one reply you may write to Apple directely. we have the similar kind of problem with iPad which is being used by my wife Mr.Neelam Vij and paid Rs.16000/- to get it replaced within a year & 6months use. so in totality we have paid Rs.28500/- + Rs. 3000/- diagnostic charges.
    1. iPhone 4 , 32 GB Black with Sr. No. 88******A4T
    2. iPad 2, 16GB White with Sr. No.DL*******KPH
    Moreover, we have no information to contact whom. even the replace set has a warranty of only three month which further confirm that Apple itself is not confident wheather product will last after replacement for more then three month. Such kind of happening do not encourage anyone to recomend this product to anyone. Would appriciate a faster response to our problem if someone from Apple is going to read this email.
    Thanks & Regards
    A K Vij
    <Personal Information Edited by Host>

    http://support.apple.com/kb/he57?viewlocale=de_de
    India
    (91) 1800 4250 744
    www.apple.com/in/support/
    hope it helps

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • I need to complain about iPad 3 i bought only 3 months but have to go to repair 2 times.  Poor services, dirty, not response staffs of APPLE AUTHORIZED SERVICE PROVIDER

    I bought iPad 3 on dated August 19, 2012
    It has a problem when using, happending 3 times already.
    1st problem - while using this ipad 3, it suddenltly shut down and show apple logo.  after reopen, found all application loaded have gone.
    2nd problem - the same issued, but can't re-open or reboot.  I have go to your dirty authorized service provider on dated October 15th, 2012.  after 4 days passed, they said will call me for updated but no any response.  I need to call your service provider myself asking the status.  They said have already been reboot with Itune and can't found any problem. I can take it back and said that They have try my device with using out of battery.  I need to charge after get it back myself.  THIS IS APPLE AUTHORIZED SERVICE PROVIDER.
    This is Macintosh Center Co.,Ltd.  APPLE AUTHORIZED SERVICE PROVIDER
    149/4 Modern Home Tower, Nonsee Road, Bangkok10120
    Staff name : Tan 
    I have called to Apple Suppor Call Center (as understand located in Singapore) report and advise our iPad problem and poor service.
    #001 800 441 2904 Mr. Charlie and Mr. Thawatchai 2 staffs have received my comment/complaint and full understand of this story and situation.
    Yesterday Noverber 12th, 2010 - the 3rd problem happend again - it more worse.  the screen show photo the USB line need to connect to iTunes.
    I have no choice need to go back to that poor APPLE AUTHORIZED SERVICE PROVIDER again as they have my story record. Same thing, they said need to check and reboot.
    IN 3 MONTHS HAVE TO REPAIR AT SERVICE PROVIDER. 
    REBOOT IF PROBLEM CAN GO BACK TO THEM --- PROBLEM  ---  REBOOT ---- AGAIN AND AGAIN.
    THIS IS 28,000- BAHT UP DEVICE BRAND APPLE. 
    MOST IMPORTANT : YOUR IMPORTANT PHOTOS, VIDEO, MESSAGE, RECORD WILL BE GONE. 
    THEY SAID WE NEED TO BACK UP FREQUENTLY WHEN USE ALL APPLE DEVICES NO MATTER ; iPhone or iPad.
    I have iPhone 1st Gen, iPhone 4th Gen, iPad 1, iPad 2, iPad 3 and new iPod 5 for my family.
    Now I thought that Samsung is my new choice and as per from my friend suggestion.  It a lot of best service from there.
    If anyone have the same case as me...Please raise it up...

    Phatara, this is a iPad user forum. There's no one here from Apple.
    You need to contact Apple:
    http://www.apple.com/contact/

  • HT5262 I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device

    I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device

    anduran wrote:
    I update to IOS 6.1.3 in my Iphone 4S and don't saved SHSH an APtickets, after it I experiment a problems with my Idevice, it show service provider but don't show signal in any place,I want to know if its posible repair my device
    Basic  troubleshooting
    Reset
    Restore with back up and if required as new

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • HT4061 is it possible to unlock a japan iphone and to know the service provider bought it second hand

    A friend of mine have received a second hand iphone bought in Japan and we try it here in the UAE unfortunately it was locked and we don't know the service provider.  Is there any possibility to check the service provider and have it unlock so he could use it here.  I will come back and check the phone details

    If the phone originated in Japan, then you are out of luck because none of the Japanese carriers offer unlocking for their phones.
    Bottom Line:  You can't use the phone in the UAE and you will have to buy another phone if you want to use it.

  • HT1277 iPhone 4S.  My e-mail service provider is Embarq.  I am receiving e-mails, but I cannot send e-mails.  I get a message that recipient was rejected by the server because it does not allow relaying.  Any suggestions?

    iPhone 4S.  My e-mail service provider is Embarq.  I am receiving e-mails, but I cannot SEND/REPLY to e-mails.  I get  message that recipient was rejected by the server because it does not allow relaying.  Any suggestions.

    Problem has been solved thanks to a posting by AmberDrivingKendal on 5/15/11.  More Like This section was a great help.

  • Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

    Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
    Any other ideas?

    Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
    <Link Edited by Host>

  • How do I get rid of an internet service provider (Cisco) that I never wanted but Cisco keeps me from getting online with my own internet service provider?

    I have tried to get rid of an internet service provider named "Cisco" that keeps blocking me from getting on the internet. I have no idea how "Cisco" is doing this. I have only one internet service provider that is Not "Cisco" . "Cisco" keeps coming up on the screen to sign in with a password which of course I do not know and do not want. I went into Safari preference to change the settings and found 2 that I do not want.  I thought I had gotten rid of this "link sys" but keeps returning  and shows that it is locked. How do I get rid of these in my Safari preferences without a password to them. I only want the one internet service provider that I have to be there and not the other two. Thank you so much.

    That is the login into the router itself. Most routers, in order to set them up the first time or after a reset or power fail, have this login procedure. You connect to the router login and configure the settings for your use.
    Is this a new router or has it been recently reset in some way? As was written above if the router was provided by your isp then contact them for the setup procedures.
    If the router is yours (or someone else's in your household) you need to look at the manual that came with it or go to manufactures website for instructions on how to set it up.
    regards

  • Our service provider add one digit to all nos. After I update all contacts using one of available programs, contacts are updated but messages received appear with pure phone nos not contact name??any fix

    Our service provider add one digit to all nos. After I update all contacts using one of available programs, contacts are updated but messages received appear with pure phone nos not contact name??any fix

    http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

Maybe you are looking for

  • How to connect a shotgun mic to my Macbook pro?

    I recently purchased the "Audio-Technica ATR-6550 Video Camera Condenser Shotgun Microphone" (http://www.amazon.com/Audio-Technica-ATR-6550-Condenser-Shotgun-Microphone/dp/B0 02GYPS3M). I need this mic to record audio into Adobe Premiere on my Macboo

  • Send HTML mail with flash

    Hi Does anybody knows how to send a HTML mail with flash to a person? grtz Tom

  • Forward button not appearing in the workflow inbox

    Hi All, We have an issue where a user says that the forward button is not appearing in the workflow inbox . This is happening only for one user. Is there an way through which we can add the forward button? Regards Archana

  • BAPI for entering MM Service Contracts

    Hi,    I would like to know which is the best bapi to be used to enter the MM service contracts. I have got two bapis 1)  BAPI_CONTRACT_CREATE 2)  BAPI_AGREEMENT_MAINTAIN Which one is the Best bapi and whats the min. required fields to be used to cre

  • Adobe Pro 7 Blues

    Hello I'm seeing three issues with Adobe Acrobat Professional 7.0. The first issue is when users copy and paste they keep getting an error message to debug or quit. Users are copying from Adobe Acrobat 7.0 and pasting to Word XP (2002) or an in-house