100 percent charge but shows 7 hours of time remaining??

Hi,
My 10 day old macbook air shows 100 percent chraged but 7 hrs of battery remaining ; then after few mins 8 hrs goes on increasing initially till 12 or may be more then again starts decreasing. Is that normal behavior?????

In saying "it can change frequently depending on what you are doing with your computer" I'd just add "take it with a huge grain of salt and pay more attention to the percentage of charge remaining. In the course of just a few minutes I've seen the silly thing tell me I having anywhere between 1 hour and 4 hours left. And during that time I was doing the same darn thing.

Similar Messages

  • My mac wireless keyboard always shows 100-percent charge when its not

    How do I allow my iMac to correctly show the battery level of my Mac wireless keyboard?
    It always shows 100-percent, which is wrong most of the time.
    It reads and shows my Mac wireless mouse battery level correctly.

    It's a bug.

  • Sometime not charge But Showing charging

    Dear Sir,
     My Friend Bought a Notbook HP 1000-1311TU P/N: D4C01PA#UUF. Sometime charging sometime showing charging but not charge.please give me solution.
    Md. Rabiul Alam

    Hello @RABIULCSLBOGRA,
    I understand that your friend's notebook computer is having difficulty charging the battery, and I would be happy to assist you in this matter!
    In order to test and re-synchronize the battery with the notebook again, I recommend following the steps in this document: Testing and Calibrating the Battery (Windows 7). This should help maintain a charge on your notebook's battery.
    Additionally, I also suggest following the steps below re-install the Microsoft ACPI-Compliant Control Method Battery:
    Step 1. Go to Device Manager
    Step 2. Select Batteries
    Step 3. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
    Step 4. Click Uninstall
    Step 5. At the prompt put a check in the box to remove the current driver
    Step 6. Shutdown the computer
    Step 7: Remove the battery for minute and then put it back in
    When the computer comes back up it should automatically find the driver.
    Step 8. Go to Device Manager
    Step 9. Select Batteries
    Step 10. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
    Step 11. Click "Search automatically for updated driver software"
    Step 12. Do the same thing with Microsoft ACPI-Compliant Embedded Controller (if it appears in the Device Manager).
    If the issue persists, Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Battery shows 100% after charge but get the 20% warnning after a few mins

    i got the new white ipod touch 64gb after charging for its 4hrs the battery was full and at 100%
    after taking it off its charge and starting a game/app after about 2 mins it showed the battery is below 20% so i quit the game and opened my battery pro app and it shows the battery is 96% but when i start the game again the battery shows th 20% but when looking at the battery at the top its showing its full white

    Apple recommends the you periodically fully (almost fully) discharge and fullycharge the battery to calibrate the battery meter.  I would try that.

  • IPhone 4S won't charge, but shows 'plug' symbol

    Hi, I'm an owner of a relatively new iPhone 4S and just out of the blue it's stopped charging last night.
    I plugged the iPhone into my laptop last night- as per usual- and for some reason it showed only the 'plug' symbol and not the lightning bolt.
    I didn't worry too much hoping it would charge anyway.
    This morning the percentage has stayed at 30, occasionally dwindling down to 29 then back up to 31.
    I've changed the USB, the output and tried plugging and unplugging numerous times and now am at a loss!
    The phone is still recognised by my computer and syncs whenever plugged in.
    I've done a hard reset soft reset and now all that's left is to restore to factory settings, but I doubt it'll do anything!
    Please could someone help!
    Thanks,
    Rebecca

    Update on the issue:
    So after leaving my phone for a few hours I tried connecting to a USB again.
    The apple logo starts up and whey- I have 100% battery!
    All good? No. I can not use any apps, connect to wifi or basically USE the phone! As soon as I remove the phone from the power source, bang. Phone dies and won't turn on!
    So, I try connecting it to my laptop hoping that the device will be recognised and something will happen. Unfortunately the apple logo keeps lighting up and fading and nothing happens.
    I'm at a loss Apple!

  • IPhone 4 will not charge but shows a plug to power source symbol, help!?

    I purchased my new iPhone 4 (32GB) about a month ago just before Christmas (2010). About a night ago I was speaking on my iPhone when the battery died and the iPhone shut itself off. Now I have run down the battery before and understand the phone requires a good 10-15 minutes plugged in before it will switch back on.
    Upon plugging iPhone in and leaving for quite some time all I was shown initially was the large battery symbol in the middle of the screen the lightening bolt symbol underneath. After a few seconds the lower lightening bolt symbol flashes between the bolt and a plug symbol pointing via an arrow to another lightening bolt symbol.
    The battery refuses to take charge and so will not switch back on. And this symbol on appears when I plug the phone in. The charger is fine as the phone recognises it has been plugged in. I even tried my friends identical iPhone charger and the same symbols appeared. This also occurred upon plugging the phone into my MacBook Pro. iTunes even did not recognise the phone was plugged in.
    I have not had any progress from these symbols since this happened two nights ago and would be very grateful for any advice anybody might have please. Unfortunately I live in Leeds, UK and my nearest Apple retailer is very far in Sheffield, and without a phone I cannot call Apple Technical Support.
    Much appreciated,
    Andy F.

    It won't recognise it at all, but luckily I backed up very recently.
    I've booked an appointment with an Apple store who promise a working iPhone within 10 minutes of your appointment, whether fixed or a brand new iPhone.
    Thank you both for your suggestions. I'll leave the question unanswered incase people have any other suggestions or similar issues.
    Cheers.

  • Battery won't Charge, but shows "power source: power adapter"

    Ever since beginning of Oct 2013 my newish (bought macbook pro retina display july 2013) decided it will no longer charge my battery, it will only provide power but nothing else. I tried using my old magsafe adapter with a magsafe 2 connector and manage to charge battery but that is also a battle to have it in right position and only after i plug in and out about 10 times. It is quite annoying, is this fixable or do i need to replace battery.
    I have seen loads of other posts but not too many recent ones. Anyone having the same problem?
    Battery Information:
      Model Information:
      Serial Number:          D862446P7W1F955AY
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          511
      Hardware Revision:          000a
      Cell Revision:          1169
      Charge Information:
      Charge Remaining (mAh):          5410
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6602
      Health Information:
      Cycle Count:          52
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -6
      Voltage (mV):          12046
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          60
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          3
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      Current Power Source:          Yes
      DarkWakeBackgroundTasks:          0
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          4200
      Standby Enabled:          1
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      DarkWakeBackgroundTasks:          0
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          4200
      Standby Enabled:          1
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0000
      Revision:          0x0000
      Family:          0x0000
      Serial Number:          0x00000000
      Charging:          No

    Thanks Clinton.
    Only problem is i got my laptop in USA and I live in SA. No one really willing to help as they deem it out of warranty as not purchased here. I am going to take it in somehwere and try see if they can try with new magsafes. I have an inkling maybe might be problem with connector, but who knows. Failing that might have to suck it up and ship it back to states and miss it for couple weeks.
    I did try do SMC reset, made other adapter work for like a day then nothing.
    thanks again for help.

  • Ical accepts and all day invite, but shows 12AM start time and no end time.

    When I receive a calendar invite for several days and the invite should read as an all day event, it shows up as a meeting at 12AM. I have reset the region, and the time zone, but this is still an issue. Has anyone else have this problem and if so, how do I resolve it?

    Hi,
    Open the System Preferences > Language & Text > Formats tab and change the Region from Custom to your local one.
    Let me know how it goes
    Best wishes
    John M

  • IPad Disabled from Kids...Not showing amount of time remaining

    So, I usually use a passcode to prevent my kids from having unauthorized access to my iPad.
    In the past, if they entered the wrong code, it would say, "iPad disabled for 1 minute" or whatever...and
    that time would go up each time they entered a wrong code up until I think 15 minutes.
    Well, now it doesn't show a time... it just says "iPad is disabled" and it isn't giving me an opportunity
    to enter my passcode (which I know).
    Help!

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • IView collapsed everytime but after open one time remain opened?

    Hi,
    I have the iView set to initial state: closed.
    The first time in the portal the iView is closed, then i open it from the tray. The second time in the portal the iView is still open.
    Do you have some solutions to this problem? How the iView can stay always closed every time i re-logon on the portal?
    Regards
    Toyota
    Message was edited by:
            Sokoshinami toyota

    Hi,
    I had same problem like yours.Follos the steps:Enter in the iView Property Editor and display the attributes of the in Initial State (Open or Closed ) property. Inside you will find Property ID , Inheritance , End-User Personalization  and Property Description . In the Inheritance  choose Locked in target objects, then save and close. The iView will be always like your choice in initial State every time you logon to the portal.
    #Bill J.

  • Battery showing 100% charge, but not running off battery

    I have an Hp Pavilion 10 Touchsmart that shows a 100% battery charge, but will not run off the battery when I unplug the AC adaptor.   I have tried calibrating the battery which went okay. I have tried uninstalling the microsoft driver for the battery and reinstalling it and it did not fix the problem.I have also checked the "Battery Report" using the cmd prompt. The battery report showed everything was charging good with the battery on the laptop for many days.I checked the "Energy Report" using the cmd prompt. The energy report had some warnings, but it was all relating to energy use.I have owned this little computer for less than a year and it should not be giving me this much trouble. At this point, I think I have done everything I can do on my end especially since I cannot remove the battery without disassembling the laptop.  I do not think it is a bad battery unless it is defective because the computer sees very little use and it is less than a year old so I am thinking a software problem. Any additional suggestions?

    It is my understanding Hp warranty is only 90 days which means it is not under warranty. I have owned the laptop for less than a year with it shipped by Hp on "Thur 9/18/2014 5:15 pm". I orginally thought it was not under warranty, but I just tried a Hp warranty status site and it said "2015-10-23" was the warranty expire date.

  • My iphone 4s charger is not working. The wire sometime can charge the phone, but the most of time, the phone can not been charged

    The iphone 4s charger is not working properly anymore. The wire is broken somewhere. Becasue it is ok sometime for charging, but the most of time, it is not.
    How can I get a replacement from Apple?
    Do I have to pay? How mmuch is going to cost?
    Thanks

    If your phone is still under warranty, you can order a replacement:
    One of my iPhone accessories isn't working. Can I order a replacement?
    Yes. You can contact your carrier (except AT&T and Virgin Mobile) or Apple.
    copied from Apple - Support - Service Answer Center
    If not, the price is 19$ in the Apple Store, check here

  • On laptop processor always reporting 100 percent use

    This is not true for my desktop which has Arch as well.  For some reason the "Processor" portion of the System Monitor applet on my panel always says 100 percent CPU, but when I click on it, and look at the processes, nothing is taking up that percentage except like 10 percent to the system monitor at times.  Glitch? or what?
    please help,
    Mike

    i guess you are using gnome... which version? did it work before? readding applet, restarting gnome didn't help? probably it's a bug, and have no joice but to wait for update

  • I am transferring contacts from my old iphone to my new iphone 4. The screen has had 'restore in progress' on the screen for 20 hours now with time remaining going backwards. Is this normal? Should I let it go on?

    I am setting up my new iphone4 and am trying to transfer all of the contacts etc from my old iphone 3GS.After linking it with itunes the screen has shown 'restore in progress' for almost 24 hours with time remaining going backwards. Is this normal? Should I let it continue?

    No, that is not normal. I guess you are trying to restore from the latest backup created by your old 3GS?
    Did you follow this article to transfer your info? iPhone: Transferring information from your current iPhone to a new iPhone

  • Installed Yosemite, now my MacBook Pro is running slow and the FileVault keeps saying estimating time remaining.

    I installed Yosemite and since then the system has been running slow.  I chose to use FileVault and it says it's encrypting but keeps saying estimating time remaining.  I've tried repair permission and restarting my computer.  Saw some other threads with similar problem and ran diskutil cs list which showed 80% the first time and now says failed.  I also did an Entre Check and here are the results. 
    Problem description:
    Mac running slow after installing Yosemite
    EtreCheck version: 2.0.6 (91)
    Report generated October 26, 2014 at 12:18:37 AM PDT
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      AMD Radeon HD 6490M - VRAM: 256 MB
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2 days 2:31:27
    Disk Information: ℹ️
      ST9500325ASG disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (360.91 GB free)
      Encrypted AES-XTS UnlockedFailed
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-898 disk2 : (510.3 MB)
      S.M.A.R.T. Status: Verified
      disk2s1 (disk2s1) <not mounted> : 11 MB
      disk2s2 (disk2s2) <not mounted> : 15 MB
      disk2s3 (disk2s3) <not mounted> : 11 MB
      disk2s4 (disk2s4) <not mounted> : 12 MB
      disk2s5 (disk2s5) <not mounted> : 8 MB
      disk2s6 (disk2s6) <not mounted> : 11 MB
      disk2s7 (disk2s7) <not mounted> : 13 MB
      disk2s8 (disk2s8) <not mounted> : 14 MB
      disk2s9 (disk2s9) <not mounted> : 14 MB
      disk2s10 (disk2s10) <not mounted> : 15 MB
      disk2s11 (disk2s11) <not mounted> : 8 MB
      disk2s12 (disk2s12) <not mounted> : 9 MB
      disk2s13 (disk2s13) <not mounted> : 27 MB
      disk2s14 (disk2s14) <not mounted> : 16 MB
      disk2s15 (disk2s15) <not mounted> : 23 MB
      disk2s16 (disk2s16) <not mounted> : 12 MB
      disk2s17 (disk2s17) <not mounted> : 11 MB
      disk2s18 (disk2s18) <not mounted> : 24 MB
      disk2s19 (disk2s19) <not mounted> : 14 MB
      disk2s20 (disk2s20) <not mounted> : 18 MB
      disk2s21 (disk2s21) <not mounted> : 10 MB
      disk2s22 (disk2s22) <not mounted> : 36 MB
      disk2s23 (disk2s23) <not mounted> : 17 MB
      disk2s24 (disk2s24) <not mounted> : 20 MB
      disk2s25 (disk2s25) <not mounted> : 18 MB
      disk2s26 (disk2s26) <not mounted> : 42 MB
      disk2s27 (disk2s27) <not mounted> : 33 MB
      disk2s28 (disk2s28) <not mounted> : 29 MB
      disk2s29 (disk2s29) <not mounted> : 12 MB
      disk2s30 (disk2s30) <not mounted> : 6 MB
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/MacKeeper/AntiVirus.app
      [not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) Support
      [not loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.AirPlayUIAgent.plist
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cloudd.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.recentsd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.secd.plist
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.corestorage.corestoragehelperd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.GSSCred.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.softwareupdate_download_service.plist
      [failed] com.apple.systemstats.analysis.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [invalid?] com.sophos.uiserver.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.sophos.intercheck.plist Support
      [invalid?] com.sophos.notification.plist Support
      [running] com.zeobit.MacKeeper.AntiVirus.plist Support
      [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.plexapp.helper.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
      Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
      Canon IJ Network Scan Utility Application (/Library/Printers/Canon/BJPrinter/Utilities/Canon IJ Network Scan Utility.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins: ℹ️
      Move_Media_Player: Version: npmnqmp 071505000006 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      GoFlex Home Backup [Network]
      Total size: 3 TB
      Total number of backups: 70
      Oldest backup: 2013-07-21 16:39:58 +0000
      Last backup: 2014-10-17 01:49:13 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% diskimages-helper
          0% backupd
          0% AppleSpell
          0% fontd
    Top Processes by Memory: ℹ️
      172 MB com.apple.WebKit.WebContent
      116 MB backupd
      77 MB Dock
      52 MB Finder
      47 MB com.apple.WebKit.Networking
    Virtual Memory Information: ℹ️
      48 MB Free RAM
      1.08 GB Active RAM
      1.04 GB Inactive RAM
      1.19 GB Wired RAM
      33.41 GB Page-ins
      1.26 GB Page-outs

    Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
    Restart the router and the broadband device, if they're separate. Any change?
    Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
    Are you connected to Ethernet as well as Wi-Fi? If so, disconnect the Ethernet cable or adapter and test.
    If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
    If you can connect to more than one network, are they all the same?
    Are all network applications affected, or only some? If only some, which ones?
    Is networking always the same, or is the problem intermittent?
    Disconnect all other devices from the network. Any change?
    If you're running a MacBook with the lid closed, open the lid. Any difference?
    Start up in safe mode and test. Any difference?
    Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
    If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Maybe you are looking for