100 percent width issue with smaller windows

It took me many times to try and submit this, perhaps as the title had the percent sign? I kept getting the system errors and logging out automatically (see system error below) even though other similar posts have the % sign in the title. So I am trying to view similar discussions, especially at https://forums.adobe.com/thread/1455954?q=100%%20width but my browsers won't let me read that page once I'm signed in.
Anyway, I am having a similar issue in that when my window is made smaller (ie. a small laptop was browsing) until the horizontal scroll bar appears, after scrolling to the right many of my verified 100% width objects do NOT continue. See homepage of htttp://www.STLcello.com for example (looks fine unless you force to a smaller window, than scroll to the right to see how the header and footer items don't continue even though they do.
I'm hoping someone will have an answer to this or the other guy's question that this has been unanswered for months now!
STL
System Error
We're sorry but a serious error has occurred in the system.
Status Code: 500
Exception Type:
Error Message:
Request URI: /adobe-logout.jspa
Stack Trace:
javax.servlet.ServletException: java.lang.IllegalArgumentException: URLDecoder: Illegal hex characters in escape (%) pattern - For input string: "%2"

Hi Dandalo
Unfortunately this is not possible with Tooltip , but you can use full screen slideshow which will have the similar effect but the limitation being the content on the page which will be not same as the referenced site you have posted.
Thanks,
Sanjit

Similar Messages

100 percent width objects with tool tip widget or...

Hi,
Anyone know how you create 100% objects with tool tip?
Like in this page
http://www.philips.com.br
You have slider in full screen.
The fullscreen widget appears to support only an images

Hi Dandalo
Unfortunately this is not possible with Tooltip , but you can use full screen slideshow which will have the similar effect but the limitation being the content on the page which will be not same as the referenced site you have posted.
Thanks,
Sanjit

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Odd 100% Page Width Issues

Hi,
Firstly sorry in advance - I'm new to Muse and I primarily work in graphics and video (photoshop, after effects etc) - so web is not my forte!
I'm having a weird issue with page width. Most of the pages on my site have tiled images or one large image in a rectangle set to 100% page width - as a background image of sorts. Other elements (rectangles etc) sit on top of that scrolling at different speeds - these are also set to 100% width.
When the browser window is at full size this works fine, however when I decrease the browser size until I get a horizontal scroll bar, the background images seem to extend further to the right than the other elements on top, even though they are both set to 100% width.
Here's a few images to illustrate:
Everything dragged out to 100% width
Page Properties
Layout problem in the browser (Google Chrome)
There's a draft version of the site at http://alivechurchlincoln.businesscatalyst.com/ where you can see the problem on the 'About' page. It happens on a number of the other pages too.
I've checked through all my layers and nothing seems to extend over the page width, including compositions.
Any help would be really appreciated!
Thanks,
Ben

I have been through all the pages this is affecting (About, Connect and Community), unlocked all the layers and selected all to see if there was any content hiding on the right side but I couldn't find anything.
Any ideas?
Thanks!
Ben

Are there solutions to Compatibility Issues with Thunderbird, Windows 8.1 and Anti-Virus Software, e.g., MacAfee?

Since I upgraded to Windows 8.1, Thunderbird freezes up and goes into "Not Responding" mode repeatedly every few minutes. My research indicates that it is a problem with compatibility with antivirus software, which obviously is needed with an e-mail program. How can this problem be solved, or is there an antivirus program that works seamlessly with Thunderbird and Windows 8.1?

Personally I use ESET NOD32. It is not cheap, but it is unobtrusive and appears to get the job done. Originally I was drawn there for their server protection, but since I no longer have windows servers that need is gone, but I see no reason to change.
Previously over the years I have used;
* Norton (Found it just to much embedded into the operating system. Something went wrong with it and Windows would not boot.
* Microsoft Security Essentials. Any application using large data files was unworkably slow. That included Thunderbird.
* AVG It was just clunky and I did not like it.
But the big issue these days is the products are not just anti virus, they are suites including firewalls, password managers/vaults and often spam and scam tools. It is usually these later tools that cause the most issues with the firewalls blocking anything but known versions of known software and spam tools that mess up because it has not had enough testing.
Basically your on your own in selecting a product5. I can not recommend one. But I seriously question the need for mail scanning. Especially after that remarkable admission by Symantec regarding Norton's not scanning mail.
Thunderbird does not run any scripts in mail, nor does it do anything with attachments before you open them and then it decodes them and places them in the temp folder where any good anti virus will scan them.
Personally I suggest anti virus rather than security suite software. Especially so if you use Chrome or Firefox browsers and they both use Google lists of known malware and phishing site to block inadvertent visits.
Windows has a firewall, your modem (over 90%) has one as well, those firewalls block ports, protocols and route traffic. Do you also need one that blocks programs?
Mozilla products have a password manager, do you need another? And so the list goes on.

Text issue with Chinese Windows XP

Hello,
When installing a distribution made with the english version of CVI 2010 on a PC with Windows XP in Chinese I have an issue with some caracters like µA or ° (see below)
What could be the reason of this behavior and could I solve it?.

Hi Bertrand_ENAC,
Have you ever try to modfy the format and language settings in the setting panel on windows xp ?
Best Regards.
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...
Attachments:
language settings.png ‏27 KB

Issue with active window

Hello you, problem solver!
I have a little issue with active/inactive windows
For exemple when I use GIMP, this software is on 3 different windows... so my problem is:
when I'm on the image window drawing lines and I want to switch the pen..
I have to click on the tools window to active it then select the pen
And to go back on the image window and draw I have to click on the image window to active it then clic again to use the pen...
Is there a way to bypass the "Click to active the window" step?
Like click to draw, click to select a new tools and click back on the image window to draw...
Thanks for your help!

Welcome to the discussions.
This might be better answered at GIMP forums or FAQ as it looks like a UI issue with GIMP. Here is a link that you might want to visit. http://www.gimp.org/develop/
Also this is a good place http://gimp-brainstorm.blogspot.com/ where you can tell them your ideas.
Message was edited by: Meherally

WRT54G2 connection issues with a windows 2000 laptop, HELP!!! please?

Ok, at my house I have a newer version of a wireless router (I can't remember which). The old windows 2000 laptop that I have connects perfectly there, but when I installed a WRT54G2 router at my grandma's house it wouldn't connect to the router. My vista laptop and my grandma's vista desktop both are connecting to the router fine (as is evident in my typing this right now), but not the windows 2000.
It is registering that the signal exists, however, it says that it is out of range and it can't connect every time I try. Which makes no sense at all because the laptop in question is sitting no more than 4 ft away from the router.....
It's driving me insane! Does anyone have any suggestions on fixing this problem? Plus I'm not even sure if it's an issue with the computer or if it's an issue with the router itself......
Any ideas would be GREATLY appreciated!
Thanks,
illueia
P.S. sorry if I was too rambley...... or I wasn't clear enough....

Download and install the latest driver for your wireless card...
I aaume the security on the WRT54G2 wireless router must be WPA/WPA2 and that's the reason your Laptop(win2000) does not connect to it...
What error do you get when you attempt to connect to the Wireless Network ?
If it connects to your wireless network then what IP Address do you get for your Wireless Connection ?

Issues with Small Business Switch config

Hi, I know that if I read the documentation I will come to the answers but I would really like some input from someone with more knowledge than me. I have an issue with Cisco SF300 , one of the Small Business Switches. I have a single interface on my router and I need to separate my internal networks , I thought that one way would be to use VLANs. On my two internal networks one network only has unmanaged D-Link switches, the other has the Cisco SF300 so I did as follows.
On the Cisco Switch, all ports default to Trunk ports. I have changed FE1-FE24 and GE1-2 to access ports.
Created two VLANS and placed FE1-FE24 in VLAN10 (also my management VLAN) , GE3 is a trunk Port for VLAN20 untagged, VLAN 20 uplinks to my DiLink Switches. This way traffic from my unmanaged switches comes in on a trunk port untagged on VLAN20.
GE4 is a trunk port and I have assigned VLAN1 untagged, VLAN10 tagged and VLAN20 tagged. VLAN 10 and VLAN 20 then forward to my Router.
The plan was to connect GE4 to my router however I had two things happen I can not explain.
Firstly as soon as I connected my D-Link to GE3 the LAN on VLAN20 went down, I could not ping Servers from PCs etc, all devices are connected to the unmanaged D-Links. Secondly the VLAN Assigment changed on GE3 and GE4 , VLANs 10 and 20 disappeared and only the default VLAN was assigned, also under VLAN Settings my VLAN interface state for VLAN20 shows Disabled. Also one of my access ports FE12 keeps changing VLAN.
Can anyone offer any suggestions as to what might have crashed the LAN and why my VLANs change. I did write my running config to the start up config by the way.
I added two screen shots.
I would seriously appreciate some help.
Thanks
Bob

Hi Garrett, thanks for your reply to my post, I hope you are well. I called Cisco support, they told me that they could not understand why this was happening and suggested a firmware upgrade, usually something I should have considered right from the beginning. This solved the issue for me.
Thanks
Bob

Display issue with vertical windows start menu and dual screen

Hello everyone
I never reported it and I didn't find any information on google or mozilla support about this so here it is :
I am on windows 7 and I set up my windows start menu vertically. I also have 2 screens. These both points are important. If I put the start menu horizontally I do not have the issue anymore, and If I turn off one screen to have the display only on one screen, I do not have the issue anymore, which is a rare setup I guess so it could explain why this bug has never been detected.
HERE IS THE ISSUE
I have display issues on website with a big width, even the default add-ons Manager firefox page doesn't display correctly. Here is a screen shot:
http://img15.hostingpics.net/pics/368172bugFirefoxDisplay.png
So as you can see the disable and remove button on the right are not displayed, and at the bottom there isn't any scroll bar to scroll ! So I have no way to display the information on the right of the page, and it happens on a lot of other website (gmail, etc)
It is not such a big issue because my start menu is on my left screen and I can move firefox on the right screen to have a correct display.
I still think this is worth reporting this bug. I hope it is clear, feel free to ask questions if you didn't understand.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Issues with installing windows on a new macbook pro retina.

Hello,
First time using bootcamp on my new macbook and I am running into an issue.
I have read the troubleshooting guide and everything else and no matter what I do I get the same problem.
The issue is that when bootcamp restarts after partitioning my drive, windows loads and I start the install process. Its says set up is starting and then it says that a required cd/dvd drive device driver is missing. I only have one usb drive connected (the one with windows on it) and nothing else. This is getting incredibly frustrating haha.
info on the macbook.
brand new (purchased yesterday) macbook pro 15 retina. 512ssd gtx 650. 12 gb of ram
I really need windows on my pc before monday so all help is appreciated.

External USB DVDs use to be an issue that req'd editing plist to allow booting from one.
I have lost track of the issues and fixes but for burning ISO:
SimplyBurns is a Mac OS X application with a GUI, which allows the user to burn CD / DVD media.
Features:
Emphasis on ease of use
Audio CD project, Data project (Filesystems: ISO9660, Joliet, HFS+, UDF) and Burn image mode
Erasing rewritable media
Persistence
http://simplyburns.en.softonic.com/mac
Here's instructions on burning an ISO with Disk Utility:
http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
And this thread on burning a Windows DVD in OSX:
https://discussions.apple.com/thread/2039118?start=0&tstart=0
(Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)
Windows 7 USB/DVD Download Tool Windows can be used with any VM
The Windows 7 USB/DVD Download tool allows you to create a copy of your Windows 7 ISO file on a USB flash drive or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the USB flash drive or DVD.
http://wudt.codeplex.com/
Install Windows 7 From USB Drive
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesn’t work, try out the Microsoft’s official tool called Windows 7 USB/DVD Tool.
Note that resulting USB drives from UNetbootin are bootable only on PCs (not on Macs).
http://unetbootin.sourceforge.net/
http://www.addictivetips.com/windows-tips/install-windows-7-from-usb-drive-requi res-2-simple-steps/

[BSPWM] Issues with my windows being the wrong shape for my monitor.

I wasn't sure what to name this, but I guess that doesn't matter.
Simple backstory: I'm running arch on my laptop. I used to run a dual monitor setup (my laptop's screen and an external monitor); however, as of a little while ago, the laptop's screen broke, leaving me to use the external monitor only.
The issue is that, in bspwm, the windows that are made are for the size and shape of the laptop's monitor... not the external monitor.
(As you can see here.[That is just a screenshot of what happens when I press the shortcut to pull up my terminal])
To set the external monitor as the monitor shown and used I use xrandr with this in my xinitrc:
xrandr --output HDMI1 --off --output LVDS1 --off --output DP2 --off --output DP1 --off --output --primary VGA1 --mode 1280x1024 --pos 0x0 --rotate normal &
If there is anything else you need to know, tell me... I'm not exactly sure what the issue is here, but I'm really hoping someone here does.

This:
bspc config remove_disabled_monitor true
might help.

100% percent width AND 100% height rectangles.

Muse should be able to have a rectangle with an image in it scaled to 100% width and height so if my browser goes full screen, the rectangles adjust to it.
No I am not talking about a Pinned rectangle sidebar menu. I am talking about rectangles on the page that contain images with a 100% width.
Muse should be able to have MULTIPLE 100% height rectangles, so as you scroll, each section with a 100% width and height rectangle adjusts to your browser size.
To see the desired effect, check out this site.
http://www.schlage.com/en/home/keyless-deadbolt-locks/touch.html

Thats right ...
there is no provision of defining percentage of ALV grid.
it takes the size of contianer automatically....
Though you can try dynamic screen generation. but i am not sure if it allows you to determine user's screen resolution and size.
As all the processing is done on Applicaition serer this doesnt makes any sense.
So u have to stick to old style programming and Static ALV grid size
Hope this helps you.

100% Page Width Issue

Hi there,
I'm designing a site with Muse 7.4 and I've been trying to get my content to scale to different browser sizes proportionally. It feels like I've looked at every tutorial there is about aligning boxes/objects with the red lines at the sides of the page, but whenever I view my site across different screen sizes, you always need to scroll to see content that's been 'cut off'. I have a variety of objects on the page including a slideshow, text boxes, images and buttons, but I wasn't sure if this would affect it. Ideally, I'd like all this content to grow and shrink as I adjust the browser width so nothing gets 'cut-off'. Are there any workarounds for this?
Many thanks!

Please check out related threads on the same issue:
Can you create responsive sites with Adobe Muse?
can you create a responsive website with muse
You can search for the work "responsive" to search the forums for more threads on this topic.
Cheers,
Vikas

Issues with Finder - window 'view type' not sticking, picture backgrounds

Since my upgrade from Snow Leopard, I've noticed a few minor problems with the Finder in Lion.
Can anyone confirm if these are known bugs in Lion?
1. At random, certain folders will not remember their view type anymore. Some do, some don't. Logging in as root and changing them there has fixed some, but others keep reverting back to a "default". It happens at any point while I am using the system, even without logging out or restarting. I've changed folder view types and come back 10 minutes later and they've changed on me! I used to have this problem with Tiger and Leopard, but not Snow Leopard. Seems it's back with Lion 10.7.0.
2. Under Snow Leopard I had various JPG and PNG photos used as backgrounds for various folders in icon view. Under Lion, almost all of these backgrounds now only occupy one small corner of the window. They are not being displayed at their full size. The fact that they worked in Snow Leopard indicates there are no problems with the photos themselves.
3. Various problems with grid layout in icon view. Dragging an icon to it's proper position in the grid will often not "stick". i.e. I line it up perfectly with the grid yet the icon goes flying off half way across the screen to another position. The Finder seems a lot less forgiving than Snow Leopard in this regard.
Since everything was runing perfectly for me in Snow Leopard I assume these are bugs that will hopefully be ironed out in future system updates.

Since my upgrade from Snow Leopard, I've noticed a few minor problems with the Finder in Lion.
Can anyone confirm if these are known bugs in Lion?
1. At random, certain folders will not remember their view type anymore. Some do, some don't. Logging in as root and changing them there has fixed some, but others keep reverting back to a "default". It happens at any point while I am using the system, even without logging out or restarting. I've changed folder view types and come back 10 minutes later and they've changed on me! I used to have this problem with Tiger and Leopard, but not Snow Leopard. Seems it's back with Lion 10.7.0.
2. Under Snow Leopard I had various JPG and PNG photos used as backgrounds for various folders in icon view. Under Lion, almost all of these backgrounds now only occupy one small corner of the window. They are not being displayed at their full size. The fact that they worked in Snow Leopard indicates there are no problems with the photos themselves.
3. Various problems with grid layout in icon view. Dragging an icon to it's proper position in the grid will often not "stick". i.e. I line it up perfectly with the grid yet the icon goes flying off half way across the screen to another position. The Finder seems a lot less forgiving than Snow Leopard in this regard.
Since everything was runing perfectly for me in Snow Leopard I assume these are bugs that will hopefully be ironed out in future system updates.

100 percent width issue with smaller windows

Similar Messages

Maybe you are looking for