100% Scanning using T code LM58

Dear all,
LM58 , RF transaction to enter PI count in WMS has article and quantity field where we can scan and enter article and total quantity of article.
we have requirement to use this t code for 100 % scanning for some warehouses.that means if article A is having 10 EA in wh WH1, user should scan article 10 times instead of scanning article once and entering quantity as 10 EA.
I wanted to know if it is possible to display quantity field in non edit mode and populate quantity as 1 UoM depending upon some parameter maintained in customised maintenance table.
Is there any enhancement available for this.
Please guide.
Regards,
Sampada Desale.

If you are talking about the custom transaction then it is very much possible as developer need to just increase the variable by one after successful scanning.
As far as standard are concern till now in all of my project as per the requirement user scans the material once and then enter the quantity manually but in one of my AFS industry project with custom transaction, we provided facility for the user to see the no of scanned shirts / Trousers in the quantity field, user was just scanning the material bar code and upon successful scanning the counter was getting increased by one

Similar Messages

I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics

I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.

The Acrobat SDK might be a starting point.
From there, perhaps a plug-in (built with C+).
Perhaps with a licensed release of a PDF Library (this could be $$).
The viable and cost effective alternative is use the tried and true.
Authoring in an appropriate authoring application with appropriate tag management.
Example: Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
This way you place "Alternative Text" when mastering content in the authoring file.
Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
Regardless, here you have a sub-forum for discussions on Acrobat usage.
Consequently discussions on/of 3rd party software is rather out of scope eh.
Be well...

Would like to scan using older scanner

Hello to the Mac family,
Once again I am stuck. I have been a very longtime user of 9.2. I really loved it. Well my slot load 350 finally died. I bought a new I-mac running X.5.2.
I have an old Epson perfection 636U scanner. I would love to be able to scan into Photoshop with this scanner. Money is now really tight so I need to be able to get this to work if possible.
I must say I wish my old apps like "Sound Jam, Pagemaker etc. worked on this new computer.
I went to the Epson site and see that the drivers are for 8.6 to 9.2. I figured these won't work on X.
There must be some sort of generic Twain driver or something that will let me scan.
This is where I need gentle help. If there is a way to scan using this could someone please advise.
Also please remember that I am a total newbie to X. In 9.2 I could download and install to the P.S. prefs folder or put the driver into import/export folder. I knew how to do all that but on X I am having trouble just doing little things like finding my music.
I really would appreciate it if someone could offer step by step help. The scanner is old but it works great. I know I won't have my OCR software etc. I just need to be able to scan pixs to PS.
Thanks for taking the time to read this.......mGb,,,..,,,,,,,,,Jim

Hello Dennis,
First...thanks for the help. I followed your suggestion and I thinkI did it right.
I tried to use the scanner but it doesn't see a scanner. When I go into Photoshop or Imageready, I can select the Twain drivers that are listed from the download. I see 5 drivers and have selected each one. When I select the 640 and try to import it says no device. I did this with all 5 and still no luck.
I rechecked all my connections and have the scanner plugged directly to the computer (no hub).
It really seemed like it would work. Prior to this I had no Twain devices listed.
Do you have any other ideas. I really need to scan and my wife will never OK the purchase of a new scanner. The computer was a large investment for us. It seems as though I should be able to get this scanner to work. I am 100% certain the scanner is good.
As far as the new OS, I am pretty sure in time I will love it. For now it is hard to navigate. In 9.2 I used the exten manager quite a bit. I could trash prefs when having trouble, I knew where most everything was located on the HD. It is just going to be a change and I am not real good with change. Kinda like an old pair of boots, you get to love them......
If you have any other ideas I would really appreciate it, as my wife has several pixs she wants me to scan. These are of recently deceased family members so this is important.....Thanks......mGb.....Jim

GL Account Clearing using T.code F-03

I am trying to clear the line items of a balance sheet gl account ( short term general liabilities) using t.code F-03.This gl account is specified as "open item Management" and line item display in the GL Master.
The problem is that when I try to clear the line items of the account, an error appears saying" Exchange rate difference accounts are incomplete for the account.
This means that foreign exchange valuation gain/loss accounts have not been assigned to this account.
My question is, why should exchange rate difference accounts be assigned inorder to clear the line items of a gl account?
Is there a setting which makes it mandatory for a gl account to be assigned exchange rate gain/loss accounts??
How do I solve this problem?
Edited by: aravind kamireddy on Sep 18, 2009 6:28 PM

Hi,
First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
You posted a debit of 100 USD @ 40 = Rs. 4000.00
You posted a Credit of 100 USD @ 42 = Rs. 4200.00
Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
Hope it is clear to you now..
Regards,
SAPFICO.

Problem in using tax code

hi Gurus,
m facing very different problem from yesterday. The day b4 all tax codes were working finely bur nw they are showing error in calculation.
e.g.
if i m using tax code with 14%BED, 2%ECess, 1%SEcess, 4%VAT.
But when entering in PO conditions, user delete the BED condition and uses manula excise condition value.
Say v r ordering 100 pcs of 50 each.
So total amt will be 5000
Manual excise 14%   = 700
ECess 2%                =    14
SEcess                    =    07
VAT                          = 228.84
which is showing correctly in condition tab.
But when v assign tax code with same combination i.e. 14,2,1,4 n whn clik on taxes its showing
BED deduct             = 70 i.e. 10% of manual excise which v entered.
Ecess                     = 1.40 i.e. 2 % of above value (70)
SEcess                   = 7 which is correct
VAT                        = 203.14 which is from above addition.
M facing this problem fron yesterday only. I compared pricing procedure also, n didnt find any change made. Also no one has made the changes. V r using TAXINJ. Also when I enter BED = 100% in tax code then some tax codes work finely. But some didnt. What may be the problem?
Regards

Hi
My guess is if you are using customised Tx code with the deductible Tax code for the 3 taxes then there is no question of it calculaiting wrong percentage during PO, only thing you need to select the right Condition types.
IF you are maintaing conditions in FV11 for the vendor pleae do check if it is picking some thing else othere than what you have entered i. e 14% then it is certain that the corresponding vendor is picking som other record instead of the current what you have created. Pleae try to create conditions Plant specific with vendor/material combination and also check for the validity of the condition also.
Best regards

Scanning an ean code

Hello
I am trying to make a voting application . When I scan an EAN
code the action I want to execute is an gotoAndStop action.
The question is how do a make a listner for the scanning job
?

Remi,
I exactly have the same issue. Can you share the user exit to be used for that issue.
Is it only applicable for RF transaction or can you use it for e.g. a packing transaction where you attach a barcode scanner to your pc on a normal SAP GUI transaction?
Thanks for your sharing and feedback,
Bert

How can you scan the Source Code of a bunch of function modules

We are in a 46C system. I need to be able to scan the soruce code of a bunch of function modules. I was unable to use the RPR_ABAP_SOURCE_SCAN and return the lines with the string I was searching for.
Thanks
Hari

Hi,
Read the main program that is the funtion pool into an internal table with statement.
READ REPORT
Use the key-word
SCAN ABAP-SOURCE
You can use the addition with includes as the function pool contains only include programs the with includes addition will read the source code present in the include.
Like this you can achieve it
" Example
DATA:
itab TYPE TABLE OF char255,
itab1 TYPE TABLE OF stoken,
itab2 TYPE TABLE OF sstmnt.
READ REPORT 'SAPLSFES' INTO itab.
SCAN ABAP-SOURCE itab TOKENS INTO itab1
STATEMENTS INTO itab2
WITH INCLUDES.
after this you can search the string in the internal table with lots of additions available in the SCAN ABAP_SOURCE
regards
sarves

Automatic line generation in f-02, etc apart from using tax code

Hi,
In f-02, for a tax code with percentage > 0, a line item is generated automatically.
Can we automatically generate a line item in f-02,etc without using T code?
Say,
100 Debit
    100 Credit
If we use tax code of 20 percent and simulate,
below is possible
80 Debit
20 Debit
     100 Credit
But is below possible ?
On simulation without using tax code (with config only without using User Exit)
100 Debit
20 Debit
   100 Credit
    20 Credit
Thanks,
Anant

hi
good
declare the type of each value of the internal table, than it will take the appropriate value.though you have not exact type for each variable , though values are coming to the internal table it cant able to identify which type of field it is.
thanks
mrutyun

To run a command using java code

hi all,
There is a command
"java -jar selenium-server.jar -interactive"
which i am running through command prompt after going to D:\MyFolder\Examples .
i want to execute this command using java code .please help

subratjyetki wrote:
please answer in detail or if posible can u give the code for thisThe detail is given in the reference. Why don't you read it?
I could give you the code but it will cost you ?100 per hour.

DDTS-100 Remote Control Replacement / Codes

I have the DDTS-100 I use it for everything in my home theater, I know maybe it isnt a real amp/reciever, but it does what i need.
The remote however is a piece of crap, small buttons, and very unresponsive even with new batteries. Is there a way to program a different remote, or a known replacement add on remote? All i want the remote to do is mute, volume, and input. It is annoying to be 5 feet away and have to press mute 25 times for it to respond.
Ideally I could combine it with my DVRs remote, one less remote needed.

AMRivlin,
Unfortunately, the codes used in most universal remote controls are made specificly to each different remote brand. The code number programmed into the remotes are not something the individual component manufacturers determine.
In your case, my best suggestion would be to pick up one of the "learning" remotes. With that, you enter the programming mode on the remote, aim the two remotes at each other, and the "learning" remote records and stores the IR signal being sent by the original. While this is a bit time consuming, it is the best and only way that I am aware of at this time.
Daniel

My MP990 will scan using my Win 7 laptop but not with my XP desktop

I have been running my MP990 using a WiFi connection. I had to replace the printer with another MP990. I can still use the scanner function using the Win 7 laptop but not on the desktop XP. With XP, I get the following message:
Cannot comunicate with scanner for these reasons:
- Scanner is turned off
- Scanner is disconnected
(It is disconnected from LAN, if using on LAN)
Please check and try again
Scanner Driver will be closed
Code:5,145,55
Since it will scan using the Win 7 "Windows Fax and Scan" but will not work on the desktop XP, I suspect I need to re-install the software. I don't have the orifinal disk but I did download a couple of files: MP990soswin100us.exe or mpnx_3_0-win-3_05-ej-exe
Can I just run one of the above .exe files to take care of my problem?

Hi gooch,
I recommend installing both of the files you mentioned as one is the driver and the other is MP Navigator. The driver will get the basic files installed, but the MP Navigator gives you an easy to use interface to power the scanner.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Please help?

Upgrading to Mountain Lion using free upgrade, download froze halfway, tried again and unable to use same code twice. Is there a way I can get a new code without having to submit other information (scan/photo of proof of purchase)?

Open the App Store and navigate to the Purchases tab. You should see Mountain Lion there. You can click there to restart the download.

I can no longer scan using HP d110 after Mavericks

I have tried so many work-arounds to fix this issue! I've read countless threads, deleted and re-installed drivers (although according to mac and hp, this wasn't necessary), I've tried scanning using the Print/Scan utility, Image Capture, Preview and Webscan and NOTHING works. The scan begins (so I know that the printer and communicating) but then I get an error message that says "An error occurred while communicating with the scanner."
My printer works fine. But scan - which worked just fine before installing Mavericks - no longer works. Help!

Hi urbanfitchick,
I understand that you are getting a scan error. I will do my best to help you resolve this issue in Mavericks. I suggest trying to do a copy from the printer, this is to establish that the scan function is working properly on the printer. If you cannot do a copy then there is a problem with the scanner hardware and we will have to address that issue first. If there is no problems doing the copy then I recommend that you power cycle the network.
How to power cycle network
Follow these steps to reset your HP printer, your wireless router, and your computer.
1.Press the Power button on the HP printer to turn it off.
2.Disconnect the power cord from the rear of the HP printer.
3.Disconnect the power cord from the wireless router.
4.Turn off the computer.
5.Wait 30 seconds.
6.Reconnect the power cord to the wireless router.
7.Wait 30 seconds, or until the router is fully on and ready.
8.Turn the computer back on.
9.Wait for the computer to reload.
10.Reconnect the power cord to the rear of the HP printer.
11.Turn the printer back on.
Then reset the Printing System
Resetting the Printing System in Mac
Open System Preferences > Printers & Scanners > Print
Hold down the Option key while clicking the "-" (Remove printer) button.
If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu
Once you have the printer installed here is a document on How to Scan: OS X v10.9
LINK: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=4023246
I am including this link for other options for scanning as well.
LINK: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Officejet-7310-All-i n-One/m-p/3081523#M73430
I hope this helps, let me know.
Thank you,
Advance 23
I work on behalf of HP

Adding Multiple files to many Sharepoint Sites based on the Sites Code (Splitting the data using a code)

Hi,
I'm pretty new to Sharepoint and wanted to ask a question to see if it can actually do what we need it to do.
We would have a top Site within a collection and under this we would have 400 sites for different sections of the business (External) Lots of teams create documents for all these sites and use the Code of the site in each document so we know what business
site its going to. For example 67890_BusinessReportMay.docx We know this document should be heading to site 67890
We have lots of services sending data to these 400 business sites. If we were to do them manually it would take most of our time to go to each site and upload the documents, even if we could do all the sites documents in 1 multiple upload. We still have
to go to each site to do it
Is there an easy answer to this? At present I have folders to match each of the 400 Sharepoint Sites and I use an Integration Services package to move all the documents into these 400 Matching folders. I do this using the Code at the start of each file name.
If it doesn't have a code its put into an error folder and reported back on.
Then I want something to automatically go through each of these folders and load them into the Sharepoint Sites document libraries.
OR
Say you have 600 files all going to the 500 sites on Sharepoint in one folder. The File contains meta data regarding the Sites Code. Using this you can split the files and automatically pull them across to the Sharepoint Sites without having to go
into each Sharepoint Site?
I'm thinking that you cant do this and I'm hoping I'm wrong. Any help would be greatly appreciated.
Debbie

Hi Debbie,
According to your description, my understanding is that you want to move the documents to different sites based on the code in the name of the files.
I recommend to create workflow and set the workflow to start when an item is created to achieve this goal.
As there is no built-in action which can move the documents cross site, we need to use the custom activity 'Copy List Item Extended' which need to be downloaded from
http://spdactivities.codeplex.com/.
Please per the steps in the link below to deploy the custom activity to SharePoint:
http://social.technet.microsoft.com/Forums/en-US/82609160-152f-461a-9a19-0e996f5a309b/sharepoint-2010-archiving-the-files-from-one-document-library-to-another-document-library-in
After that, we can create a workflow to meet the need.
Here is the detailed steps to create the workflow:
Create a column in single line of text type(called NO for example) in the library where the documents are uploaded, and input value manually in the column to store the code when uploading the documents. (We can also use workflow to extract the code from
the name of the documents if the codes are always 5 numbers.)
Create a workflow associated with the library and set the workflow to start when an item is created.
Select If current item field equals value, change the settings to be If Current Item: NO equals 67890.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at site 67890 URL.
Select Delete Item, change the settings to be Delete Item in Current Item.
Create other conditions from step 3 to step 5 to copy the documents to different sites and delete current documents.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I have some movies I used redempetion codes for in iTunes on my computer hard drive, but they are not showing up on my Purchased list nor in the Cloud. I am concerned if something should happen to my computer that the movies will be lost.

Like the topic says, in the past year, I have used redemption codes on blu-rays I have purchased in iTunes and downloaded copies of the movies to my desktop. The problem is I am not seeing them in the Cloud if I want to watch them on my iPad or Apple TV. It also worries me that should my computer crash, the movies are lost since the codes are already redeemed. Advice?

I can only answer your first issue. In your ipad go to settings, iTunes & App Store, click on your Apple ID and sign out. Wait a few minutes and then log back in. The hidden apps shouldn't show any more on your ipad.

100% Scanning using T code LM58

Similar Messages

Maybe you are looking for