1009 error in my ipad

1009 error in my ipad. Why?

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Similar Messages

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page

Error on my IPad 2. When I'm trying to access in utilities to configure the email, this close suddenly and send me to home page.

Not sure about Utilities on your iPad. Do you mean the Settings app?
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Error Message on iPad: Sending limit exceeded

Error Message on iPad: Sending the message failed because you exceeded your sending limit. I'm not using cloud and I can send an email using a different device.

What mail provider do you use and you get that message always?

HT1222 error 14 restore ipad 2 GSM iOS 5.1.1

error 14 restore ipad 2 GSM iOS 5.1.1

I spoke to Apple Tech Support. They were very helpfull and resolved the problem. First I was told to put into airplane mode for 15 seconds then go back to problem. That didnt help but apparently this solves lots of network type faults. Next I was told to reset the network that also didn't work. Finally then i was told to Hold both buttons until the screen goes black, when the Apple symbol returns release buttons. When the pad rebooted this cured the problem and i was able to tether again.
It seems you try this first on any faults it will often resolve problems. I've added this in hope that it will help others with any type of fault.
Can I thank you for all your help. Kind Regards Keith

I have an "unexpected error" on my iPad for my VPN.

I have an "unexpected error" on my iPad for my VPN. I removed my old certificate because it said "not trusted" and received and installed a new certificate (now it shows trusted) but get the same message. Worked find before I installed iOS7.

Could be a "bug".
Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
 Cheers, Tom

HT201412 my ipad will not open due to error massage: " This iPad hasn't been backed up. Back ups happen when this iPad is plugged in ( it is) , locked and connected. I have it connected to my iMac now.

I just traded my old iPad for a retina display. I keep getting error message: This iPad has not been backed up..etc." I have it plugged into my iMac and the photos did x-fer. I cannot however open the iPad. If I could get it open I could back it up. Any advice for this newb? Thanks and All the Bset, Kimberly D

Hi Kimberly,
Perform a Reset on the iPad (different from just restarting). Hold down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the issue.
Hope this fixes your issue!
Joe

XSL-1009: (Error) Attribute 'version' not found in 'HTML'

Hi,
I've got the following problem: oracle.xml.parserv2.XSLException
<Line 1, Column 7>: XSL-1009: (Error) Attribute '{http://www.w3.org/1999/XSL/Transform}:version' not found in 'HTML'.
and I wanted to know what are its origins and what to do to go around, knowing that:
- we run a java application on an oracle 9iAS and it works fine !
- we run the same application on an oracle web-to-go server and it gives this message on the client when trying to put
- the mobile server 'java environment' is a little bit never (version) than the online environment, both servers (9ias an mobile) run on the same machine (mobile is never -> impact on client environment? Installs run under jre 1.3.01)
- we have an xml document (DOM) and an .fo stylesheet (file/url), so no html for output! Where comes it from? The <xsl:output method="html"> has even been removed and tried with method="application/pdf", no change.
- the function XSLProcessor.newXSLStylesheet raises this exception; to make it at least run on online environment, we used the .jar file from JDevelopper 9.0.2.822 (this .jar is used in JDev, on 9ias and mobile client)
- the output file (via apache's fop) shows correctly in the online version, but fails the create/use of the stylesheet (tried stylesheet with xml data for output and a generique 'Hello World' .fo for pdf output, both fail)
- the .fo starts with <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format" version="1.0">
- we even tried xsl:version="1.0" and no version at all
- the same XML parsed with an .xsl for html output works fine, in mobile, the attribute "http://www.w3.org/1999/XSL/Transform" does not show up as an error
I guess we have a version or configuration conflict, but what exactly could it be? If you need some more version numbers, just let me know.
Thanx very much for any help!

Hi,
as I wrote in the inital message, we even left out the output method or used "application/pdf". The result is unfortunately always the same. And I still claim this is not a problem with the stylesheet itself, it has to do something with the mobile's environment.
Something I didn't tell: we have 2 servlets in our application, 1 responsible for output in html and 1 in pdf. The .fo stylesheet passed to the 'html servlet' is parsed correctly (and shows the source code, because it does not know about fo and conversion to pdf), the .xsl stylesheet passed to the 'pdf servlet' raises same exception/same line. You might tell us that there is a problem with the 'pdf servlet', but once again: why in online it is working?
Greetings and thanx very much for your precious time!

Preloader #1009 error

Halo. I've been trying to load external swf ("index.swf") with the following code in AS3:
//it's a simple preloader with one dynamic text field: "percent"
//the "index.swf" is suppose to stop at 689 frame after being loaded (this part works fine)
stop();
import flash.display.*;
import flash.net.URLRequest;
import flash.events.Event;
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgress);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
l.load(new URLRequest("index.swf"));
function onProgress(event:ProgressEvent):void{
   var perc:Number = event.bytesLoaded / event.bytesTotal;
   percent.text = Math.ceil(perc*100).toString();
function onComplete(event:Event):void{
   var container:MovieClip = MovieClip(l.content);
   removeChild(percent);
   percent = null;
   addChild(container);
   container.gotoAndStop(689);
Of course I receive the #1009 error : Cannot access a property or method of a null object reference. I guess it is some "stage issue" but I'm not familiar enought with AS3 to avoid the problem by my own.
Could you please help me with the code.

You were right. My idea about "stage issue" also was confirmed.
The problem was in part of the code on the first frame of the "index.swf" (file that I was trying to load):
stage.align="T";
I think that this part of the code is being executed before the "index.swf" is loaded.
Thanks for replies "kglad" and "Ned Murphy"
Regards

TS4006 I have an error on my ipad stating: "Server stopped responding"

I have an error on my IPad stating: "Server stopped responding'
However, I have full connection to wifi, I tried rebooting wifi, turning off wifi and turning back on -on I Pad, I tried turning on/off airplane mode, etc.
My email is working fine so I know I have internet connection to the IPad....
Does anyone have any advice?
Zenna

Tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.
Then restart the device.

Restore Error 3 in iPad 3 plz help me

Restore Error 3 in iPad 3 plz help me

iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom
Suggest you delete iTunes on your computer and reinstall. http://support.apple.com/kb/HT1923
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Message was edited by: Texas Mac Man

TS3694 I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"

I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"
Can anyone help me?

Are you using the latest version of iTunes?
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

XSL-1009 error

Ok, I'm driving myself nuts with this and hoping someone can help! I've reviewed the other posts and re-checked things but it still doesn't work. Here's a simple test case:
I have two tables. One of them is the SCOTT.EMP table. The other table is one I created; very simple two column table as follows (also in the scott schema):
CREATE TABLE sjh_test
sales_brand_bsnss_id VARCHAR2(10),
xml_doc XMLTYPE
In the xml_doc column I've stored an XSL style sheet. Here's the insert statement used, with the actual style sheet:
insert into scott.sjh_test
VALUES(100, sys.XMLType.createXML
('<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<html>
<body>
Hello there.
<xsl:for-each select="ROWSET">
<table border="1" cellspacing="0">
<xsl:for-each select="ROW">
<tr>
<td><xsl:value-of select="EMPNO"/></td>
<td><xsl:value-of select="ENAME"/></td>
</tr>
</xsl:for-each>
</table>
</xsl:for-each>
</body>
</html>
</xsl:template>
</xsl:stylesheet>'))
All I want to do I create a simple proof of concept which grabs some data from the EMP table as an XML document, then apply the XSL style sheet and get a result--the HTML output. Here is my code. The line of code "dbms_xmlquery.setXSLT(queryCtx, theStyleSheet);" throws the XSL-1009 error. The actual error text is "ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: XSL-1009: Attribute 'xsl:version' not found in 'ROWSET'."
declare
queryCtx dbms_xmlquery.ctxType;
queryCtx2 dbms_xmlquery.ctxType;
result clob;
theStyleSheet clob;
errorNum NUMBER;
errorMsg VARCHAR2(200);
v_more BOOLEAN := TRUE;
begin
queryCtx := dbms_xmlquery.newContext('SELECT empno, ename, deptno FROM emp WHERE deptno = 7369');
queryCtx2 := dbms_xmlquery.newContext('select s.xml_doc.getClobVal() as stylesheet from scott.sjh_test s');
theStyleSheet := dbms_xmlquery.getXML(queryCtx2);
dbms_xmlquery.closeContext(queryCtx2);
dbms_xmlquery.setXSLT(queryCtx, theStyleSheet); -- ERROR HAPPENS HERE!
result := dbms_xmlquery.getXML(queryCtx);
dbms_xmlquery.closeContext(queryCtx);
WHILE v_more LOOP
DBMS_OUTPUT.PUT_LINE(Substr(theStyleSheet, 1, 255));
IF Length(theStyleSheet) > 32767 THEN
theStyleSheet := Substr(theStyleSheet, 32768);
ELSE
v_more := FALSE;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(Substr(SQLERRM,1,255));
end;
Any ideas??
Thanks very much, in advance.
Scott

Thanks for the suggestion. That gets me past that problem. It is now throwing a NullPointerException on this line:
result := dbms_xmlquery.getXML(queryCtx);
Here's the full code:
begin
queryCtx := dbms_xmlquery.newContext('SELECT empno, ename, deptno FROM emp WHERE deptno = 7369');
select s.xml_doc.getClobVal() into theStylesheet from scott.sjh_test s;
dbms_xmlquery.setXSLT(queryCtx, theStyleSheet);
result := dbms_xmlquery.getXML(queryCtx); -- *** NullPointerException occurs here ***
dbms_xmlquery.closeContext(queryCtx);
WHILE v_more LOOP
DBMS_OUTPUT.PUT_LINE(Substr(theStyleSheet, 1, 255));
IF Length(theStyleSheet) > 32767 THEN
theStyleSheet := Substr(theStyleSheet, 32768);
ELSE
v_more := FALSE;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(Substr(SQLERRM,1,255));
end;
Thanks again for the suggestion. It looks like I'm close now.
Scott

TS4036 Error Message: This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.

How do I clear up this Issue? Error Message: This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.
I plugged it in and it is charging now. It will not allow me to unlock it and when I push the 'ok' button for the error message, it still appears....will not go away.
Do I just allow it to charge and it will automatically backup itself? If not, what do I do?

Hold the power and home buttons at the same time until you see the Apple logo, then release. This will restart the phone and give you access again.
To troubleshoot your iCloud backup, try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

How do i resolve an activation error in mini ipad

how do i resolve an activation error in mini ipad?

If you were on iOS7 beta, then it looks like the beta version has expired on you. You have to upgrade to the latest release version to get it working again.
Go here: https://developer.apple.com/devcenter/ios/index.action
Once there, download the latest version for your device and install the update the iPad. iTunes will not do this automatically, but if you do the following steps (after downloading) you should be good.
Plug iPad into your computer where you downloaded the latest release (7.0.2 at time of this post)
Open iTunes and click on the button in the upper right of the app for your iPad
Hold option (mac) or shift (windows) and click on Check for Updates. This will bring up a browse dialog.
Find the .ipsw file named something like this: iPad2,5_7.0.2_11A501_Restore.ipsw
Follow prompts to update and activate your iPad.
You should be back to normal at that point.
Apple will expire developer versions to make sure people are not using old versions for testing or development.
Hope this helps!

"The software required for this iPhone is not installed correctly. Please reinstall iTunes to install the required software." I get the same error on my iPad.

I upgraded my itunes to 10.6 and now I get the error "The software required for this iPhone is not installed correctly. Please reinstall iTunes to install the required software." I get the same error on my iPad. I've tried uninstalling and reinstalling. Please help!!

Edit: 10.6.3. I have uninstalled using the uninstall programs on itunes and then I downloaded again from the itunes website multiple times. This is not resolving the issue. The phone shows up in My Computer.

1009 error in my ipad

Similar Messages

Maybe you are looking for