101 movement not happening when production order got backflushed.

HI SAP Gurus,
For SKU 101 movement not happening when production order got backflushed, but 261 movement successfully happened. Please let us know any settings need to check?
Thanks and Regards,
SHARAN.

Hi Sharan,
A 101 movement for the production order takes place when
- You receive the production order via MB31
or
- Confirm the last operation which has PP03 control key
A backflush is done only for the components called by the production order & not for the header material.
Hope the above answers your query.
Regards,
Vivek

Similar Messages

GR for production order post to cost center and not to the production order

Hi all,
when we post the goods receipt for the finished product against the production order (mov. type 101), the order is not credited with the corresponding stock value. Instead of this, the value accounts to a cost center.
We specified this cost center in OKB9 (Default account assignment), because if not, we get an error when posting the goods receipt cause of lacking accounting object.
I can't see why the system does not credit the production order?
Any ideas?
Thanks for your time
Daniel

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

Scheduling parameters are not defined for production orders

Hi All,
when i convert the planned order to production order i got this massage popup coming Scheduling parameters are not defined for production orders . please let me know this .

Hi,
One of major customization steps for the order type is missing. Run OPU3 and maintain settings for the order type you are using. You may copy settings from an older type.
Regards.

Target cost and actual cost not picking in production order

Hello,
The target cost and actual cost is not updating in production order when I display it in CO03 in cost analysis.
Even though we have maintained planned price in KP26.
Please suggest how it can be populated.
Best Regards,
Tapan

Hi Tapan
For Target cost
1. Your std cost must be released before Goods Receipt
2. There must be goods receipt posted on the prod order
3. You must calculate variances in KKS1/2
For Actual Cost
1. Post Goods receipt and Goods issues
2. See if any mat movements are pending in COGI
3. Ensure that operation is confirmed in PP and no entry is lying in COFC
Regards
Ajay M

Material Cost Not Shown in Production Order if planned with MD50

Hi,
We have run MRP MD50 for a sale order item ie FERT material which has BOM Items. All the stock of the BOM items is tranfered from Unrestricted Stock to Sales order stock. FERT ITEM planned order is converted to Production Order and all the BOM items sales order stock is issued against PO & Sales order no with Movement Type 261E.
After confirmation and goods receipt stock of FERT is shown under sales order Stock of Fert Material.
We can see the cost of operations but cost of materials consumed against the Production order is not displayed in Production order Cost analysis..How material cost can be displayed????
If i create PO with out refering the sale order that is normal process i can see the cost of materials triggering in Production Order.
Can we settle the varience when we are planning against sale order???
Some one Pl help us.
John

Dear,
Check your variant which showes the cost. See the following report
KKAC - For Sales Order with Assigned Orders or
KKBC_KUN - For Sales Order or
KOB1 - Actual Costs

Phantom Assembly not exploding in production order

Hi All,
We are using phantom assembly as a BOM component.
When we create a planed order from MD03 or MD02 and try to convert this planed order to production order the components of Phantom assembly are not explode in production order. When I tried with read PP master data option it get explode.
Can you please let me know the reason?
Thanks,
SAP PQ

Dear ,
Couple of points on this issue which may help you understand the problem : Bom Explosion With Phantom Assemblies will happen based on the following set up .
1. You need to maintain the special procurement key-50 for the phantom Assembly
in the MRP 2 View of the material master
2. We can override the Phantom Assembly Setting by defining in SPRO --->
Define Explosion Types so that MRP Creates Procurement Propasals for the
Phantom Assembly itself.ie We can Swith off the Phantom Assembly Settings.
This settting need to be defined in the BOM Item details screen in the Basic
Data Tab Page under MRP Area.
So check in your Bom whether switch off phantom assembly is defined.Make the Explosion Type-Blank
3.Run MRP Single Item - Multi level - Transaction MD02 with Planning Mode 2 : 'Re-explode BOM and Routing'. The Phantom Item will now get exploded correctly in the Planned Order.
4.Check the Validity of the BOM and planning date
5.Check the MRP4 set up in FG where you have kept the BOM/Routing selection
6.Check wether dependent requirement material master -MRP4 view -MRP for Depent Requ should be blank .
Check the above points and come back
Regards
JH
Edited by: Jiaul Haque on Jun 14, 2010 2:15 PM
Edited by: Jiaul Haque on Jun 14, 2010 2:18 PM

Goods issue document is not displaying in production order

Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
Thanks in Advance.

Hi,
Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
Thanks
Kumar

Componant cost not picking in production order

Hi,
Componanat cost is not picking in production order, when i m creating plan order to production order in make to order scenario.
At the same time when i m creating production order by CO01 its working.
Please let me know whats missing?
Tara

Hi,
Thanks for sharing thoughts.
Issue resolved.
(SPRO-Sales and Distribution-Basic Functions-Account Assignment/Costing-Maintain Requirements Classes For Costing/Account Assignment-execute-for req class 040-Account assignment catagory -M & Valuation-M)
Tara
Edited by: tara bhapkar on Jul 7, 2011 2:52 PM

When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

Planned orders are created when Production order is open

Hi Everyone
We have Make order and Make to stock scenarios in the system for various products. When Production order is still open ( Fully confirmed with C015 and partially delivered), system assuming that order is completed and created a new planned order for the undelivered quantity against Sales order.
As per my knowledge MRP shouldn't create new planned orders when old production order is still incomplete. The old production order has status REL, PDLV and CNF.
Any help is appreciate and it is our production issue
Regards
Prasad

Hi,
is the order marked as completely delivered on the Warehouse view? Have you reached the under delivery tolerance for this order with your partial delivery from production? If yes, this would be the reason why the system thinks that a new order is required
Regards
Thomas

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

You need to link your iPhone number to Messages - and Facetime if you use it. For Messages go to Settings>Messages>Send and Receive at>You can be reached by iMessage at. If your phone number is showing there, select it as your Contact address. If it doesn't appear in there, take a look at the end of this article for help.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

How do I download a slide show with captions and music to my IPad? It is not happening when I sync.

How do I download a slide show with captions and music to my IPad? It is not happening when I sync.

The way that you would transfer photos from iPhoto to the iPad would be to sync with iTunes. Connect the iPad to your Mac with the cable and launch iTunes. Select your iPad under the devices heading on the left. Then click on the Photos tab in the iTunes window on the right. You can select the folder from which you want to sync your photos in the drop down menu bar - so select iPhoto there. Then select the album or events that you want to sync from the windows below. After you have made your selections, click on Apply in the lower right corner of iTunes.
I am not sure how the iPad will handle a slide show in the photos app that was created on your Mac. You can create basic slide shows on the iPad using the different albums, events or faces that you have in the Photo app, but as for the captioning that you have already set up, I don't know how that will work in the app when you sync the slide show.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
Just started happening yesterday.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Do you see any prefs related to that knoxnews.com site on the about:config page if you enter that URL in the Filter?
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Adobe Reader plugin :This sentence "le fichier ne commence pas par '%PDF-'" appears when I try to open some (not all) PDF files within Firefox (does not happen when I download the file)

This sentence (in french version) "le fichier ne commence pas par '%PDF-'" appears when I try to open some (not all, mainly bigger than 1Mo) PDF files within Firefox (does not happen when I download the file)

You mention Thunderbird, has the PDF file been emailed to you? If it has this support page from Adobe may help - http://www.adobe.com/fr/support/toptech/acrobat/319294/

101 movement not happening when production order got backflushed.

Similar Messages

Maybe you are looking for