101 Spec Stock Indicat O Parts prov. Vendor in Quality inspect reporting

Dear all,
. We are creating a PO (ME21N) indicating in the view u201CDelivery addressu201D the same vendor than the PO and the flag u201CSubcontracting vendoru201D
. The material has in MM02 the inspection type 0130 Receiving Insp. from External Processing.
. There is QM plan with the Usage 53 GR external process.
. When we do MIGO 101 u201CSpecial Stock Indicatoru201D O Parts prov. Vendor. The system creates automatically an inspection lot.
But in MMBE the stock appears in u201CStock Provided to Vendoru201D u201CUnrestricted Useu201D. The customer wants to control that stock in u201CQuality inspectionu201D
Someone know what I am missing?
It is possible do to a 101 u201CSpecial Stock Indicatoru201D O Parts prov. Vendor controlling it in u201CQuality inspectionu201D in the reporting?
Cheers,
Marta

Hi FF,
The status of the bath are
REL Released
PASG Plan/specification assig
CCTD Insp. characteristics cr
CALC Sample calculated
SKIP Skip lot
QLCH Quality level relevant
What does SKIP Skip lot means?
Thank you very much,
marta

Similar Messages

Vendor wise Quality inspection parameter for same material

Hi,
I am working in Quality Management for Material procurement quality check according to vendor, The Quality Inspection parameter same material procure deferent vendors have different parameter.
Please help me for SAP configuration for above scenario.
Thanks
Rajesh Tiwari

No Answer received yet

Stock for the particular day - Unrestricted, Blocked, Quality Inspection

Hi,
There is a standard transaction MMBE, where we can see the current stock values with all specifications like unrestricted stock, blocked stock, reserved stock, quality inspection stock....etc.,
in the same way I would like to have the stock of the material for the particular day.
Is there any standard transaction available?
If it is not available, please let me know how to arrive the stock(Logic) to prepare a report for that.
-Sarasija

Hello,
MB5B gives you the opening & closing stock on a particular date. But i dont think it gives you the detailed breakdown of the stock (viz., Unrestricted, Blocked, Quality Inspection). Correct me if ia m wrong.
@OP: FYI the current stock (period-wise) is stored in the tables MARD & MCHB. But none of these give you the current day stocks.
BR,
Suhas

Occasional quality inspection stock in production order

Hi experts,
I have QM activated to material with 03 and 04 control type but, in 04 control type I didnu2019t select u201CPost to Inspection Stocku201D because normally production stock go to unrestricted stock. But, in some productions I need that stock go to u201CInspection Stocku201D. How can I do to doing this in some productions orders?
Thanks
J.N.

Thanks by your answer
Whats happen is that in some production versions we need that production stock entry to quality inspection. Before activate QM to this material in my production order I can change Control stock type (in Goods Receipt tab) to "Quality Inspection". Now systems give me an error message when I change this field.
Other option is in MIGO (Good Receipt > Order) change stock type to "2-Quality Inspection" but when I save the document system change this option to "Unrestricted use".
Can anybody help me?

Backflush Semifinished product and stock post to quality inspection stock

Dear Experts,
Please advise is it possible for the below in SAP. How to do?
When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
1st backflush posting -> post to quality inspection stock
2nd until 10th backflush posting -> post to unrestricted stock (skip)
11th backflush posting -> post to quality inspection stock
Thanks.
Regards,
Wong

Dear Experts,
Let me further explain what I want.
Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
Thanks in advance.
Regards,
Wong

How to clear the stock of material provided to vendor(subcontracting stock)

Hi SAP Gurus,
Please let me know how to clear the stock of material provided to vendor(subcontracting stock) and need your help in what senario this stock will show in " Matl prov. to vendor "
Thanks and Regards,
SHARAN.

Hi Sharan,
Matl Povided to Vendor stock will appear in Subcontracting scenario.
If at all you have given some material to a subcontractor , this will be consumed automaticaly when you will recieve the ordered material from subcontractor.that is 543 movement will take place in the backgroung when u do the GR.
In case if u need to clear the stock u can do 542 and take the stock back to unrestricted.
Edited by: Donsandy on Jan 21, 2009 6:19 PM

Process for Replacement for rejected parts by vendor

Dear All,
We are facing a problem in mapping the process of Replacement for rejected parts by vendor.
Scenario:
In case of import vendors, material is received in stock and payment is made to vendor thru Invoice.
Now in case of defected parts vendor sends the replacement and the defected part is scrapped.
Is there a process to receive the replacement part with proper accountability ?
Thanks & Regards,
Ritesh.

Hi AP,
We are scrapping the rejected material. Can you explain which movement type is used to put rejected stock to vendor movement type.
Thanks & Regds,
Ritesh.

Quality Inspection with Parts Provided to Vendor - Mvt 541

Hai All,
The scenario, Material stock is available in Quality Inspection stock. For final operation this has to be sent outside to a Subcontractor.
With Mvt type 541 in MB1B, unable to create the transfer document with Inspection stock for that material. Mvt 541 doesn't recognize the Quality Inspection stock of Material.
I created new movement type by copying mvt 541 in OMJJ. But unable to enter "Inspection Lot Origin" value (OMJJ - New movement type --> Update control / WM movement types --> select line & goto Details) which will trigger Insp. lot creation during material movement.
Kindly help me.
Regards,
Jags

Hi,
Can you explain the business need to do something like that? Because the logic is once the stock is in QC it has to be cleared for you or your sub-con vendor to use it. i am sure you would not want to use sub-standard parts either inhouse or by your sub-con for your products.
So clear the inspection lot first & then once in unrestricted then issue the material to sub-con.
Await your inputs.
Regards,
Vivek

Subcontracted Stock at Vendor has quality problem - must be blocked

We have stock at a Vendor (Special Stock Type O) that has a possible quality problem. It must be put on hold until we determine the extent of the problem.
It is still showing up in MD04 as available stock. I tried to move it to QI with movement 322 but it still shows up as available.
How can I block that stock from consideration by MD04 without physically removing it from the Vendor?
Thanks in advance.
Best regards to all!

Hi ppkk,
Thanks for your thoughts.
The problem is that this stock is at the vendor, so there is no storage location. We have Quality related Storage Locations for stock in the plant, and if we move parts to those storage locations they do not show up as available stock in MD04.
But the Special Stock type O is just "Stock at Vendor" with no Storage Location.
I think that we would have to receive the stock back into our plant in order to move it to a Quality related Storage Location.
Does that make sense?
Thanks again.

After MIGO mvt 101, moving stock to blocked.

Hi,
after posting a good receipt with MIGO (mvt type 101) I want to move this stock into blocked stocked
using the material document of the goods receipt.
How can I do this?
I tried with MIGO selecting transfer postings, material document and indicating the material document
of the goods receipt but system can't allow this:
Diagnosis
You want to post a goods receipt, goods issue, or transfer posting with
    a material document as a reference. The document entered does not
    correspond with the prerequisites in order to be used as a reference
    using this functionality.
System response
The prerequisite of this functionality is that there is a material
    document without a reference, in other words, the document posted at the
    time must have been an 'Other' goods receipt/goods issue or an 'Other'
    transfer posting, according to the selection.
If, for example, you want to post a goods receipt, you cannot use a
    transfer posting document as a reference.
Procedure
Choose a document suitable for the selected activity.

Hi,
If you want to post to Blocked stock, do it while you are taking the GR - 101 -blocked stock. When it clears the inspection then you can transfer that to unresricted stock.
But here remember, you can not transfer with ref. to material document. Input the material and Quantity.......
You can also explore the functionality of 103 nad 105. Posting to Gr-Blocked Stock and releaseing from GR-Blocked stock. Here you can transfer with ref. to material document. Most of the companies use this functionality, in case material needs intial or visual inspection.
Hope this resolves your issue.
Thanks,
Kris

There is a type of partner to indicate a different supplier (vendor) for R

There is a type of partner to indicate a different supplier (vendor) for RFQ. How can I use the partners (ex. by plan) from agreement when I create RFQ in reference PReq with agreement like source of supply?
I defined OA for Ordering Address partner by plan for the agreement. I would like use the good partner by plan when I process a PReq (agreement with source supply) in RFQ.
Thanks - Rene

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Block Vendor invoice for quality inspection stock

hi,
I have done MIGO & manually change stock type from unrestricted to quality inspection & posted the document. Now i want vendor invoice should automatically block when doing the MIRO, but it is not happening. How to do this?
Thank's & Regard's
Parag lute

Dear Parag,
Now that you have manually changed the stock type unrestristed to Quality inspection, the option you can use is go to stock overview Tcode:MMBE and psot the stock from quality to block stock. This is completely mannual process.
If you prefer system to do it automatically, then activate quality inspection setup in MM02, quality view -> inspection setup (inspection type - 01, 04, 08) and also maintain Qinfo Tcode: Qi01 for the assigned material.
Regards,
Prashanth Pai
"Award, if usefull"

Quality inspection stock for a vendor

Hi,
When receiving material against PO for a vendor, stock should get posted always in quality inspection for this vendor. This requirement is only for particular vendor, not for all. If in material master, QM procurement key is active, then it will be for all vendor, which is not required.
Please suggest.
Regards
parag

please check the vendor purchase view, there would have been a check mark.or may be the check mark in the info record.

Set PO item of one vendor deliver to quality inspection stock ?

Hi Experts,
I would like to know is there any posibillity to add some information on vendor master or PIR or something else , so that the related PO item will be set to quality inspeiction stock automatically ?
here, we won't to set QM indicator in material master, as those materials will not be checked normally, only for the new vendor, we expected the inspction check for one specific period.
BR , shubin

Purhcase order Item level delivery tab you can select stock type as quality inspection. So that whenever you do GRN it will go to quality stock.
While doing GRN, where tab manually you can select quality. That time also it will go to qulaity stock.

Stock provided to vendor Quality inspection Stock

Hi
can any expert please Explain what is use of subcontractor inspection stock ,how the movement takes place between Stock provided to vendor unrestricted use & Stock provided to vendor Quality inspection if Iwanted to move between this two location how can i activate the QM ?

Hi,
I think you can not move the inspection stock in your plant to inspection stock provided to vendor.
Regards,
Prashant

101 Spec Stock Indicat O Parts prov. Vendor in Quality inspect reporting

Similar Messages

Maybe you are looking for