1024 x 576

I have to set up a DVD for PAL to be played on Plasma... Could anyone tell me if 1024 x 576 is the right pixel size for this?

That is the correct "square pixels" size. If you give a movie of that size to iDVD to make a PAL DVD, or to Compressor for compression as PAL, it will convert well to 720x576 anamorphic as posted above. Remember 25fps too.

Similar Messages

  • Exporting an avi out of premiere cs4 from a tiff sequence (1024 x 576)

    Hi i would be so greatful if someone could inform me of the correct setting becouse at the moment the avi i export seems to not be wide enough.
    I have a tiff sequence renderd out from after effects at 1024 x 576 and set to square pixels. i am required to then take this into premiere and render out as a microsoft avi with the compression set to none. i also need to add a sound file to this the movie.
    i begin by setting up a new sequence and as i cant seem to set the size to 1024x576 i have selected the preset widescreen 48khz (not 100% if this is right) i then bring both my tiff sequence(1024x576) and my music on to the time line, i the click export and media :  Here is the settings on the screen and as you can see in the preview widow the size seems to look about right. However once the movie has been exported it does not appear as wide as this.
    i would be so greatfull if you can tell if i am doing anything wrong.
    Thankyou,
    Ryan

    Why do you need the AVI file, and does it have to be DV AVI? The problem will be that DV AVI is going to Export to less than what you have in both your Project/Sequence and your Assets. [Edit] Must have been dreaming, as you never mentioned "DV. You should be able to Export out as MS AVI [Uncompressed]
    Depending on exactly how you will use this file, might provide some other alternative. There are several other good CODEC's, that might get what you have into what you want.
    Please define the use for the Exported file? Answers will flow in.
    Good luck,
    Hunt
    Message was edited by: the_wine_snob Added [Edit] and removed DV references.

  • Fcp preset: pal 1024 x 576 anamorphic

    Dear Great Experts.
    Is there a preset in fcp for widescreen 16.9 anamorphic for pal? Or what elements would one incorporate for such a preset.
    Broadcasting over the internet.
    Greater details if needed:
    I don't know much, but will tell you what i do know, and probably alot will be unnecessary to tell, but I would need to be more of an expert in this area to edit what I will be writing here...lol, thanks so much:
    We make animations, or slide shows movies in After Effects in a 1024 x 576, Preset: Pal D1/DV Wide Screen Square Pixel, Pixel Aspect Ration: Square format.
    Then render with output module settings in After Effect using: 'stretch' to 720 x 576, locked to 5.4 aspect, Pal D1/DV, which squishes the final movie horizontally, as you can see. This is to get, as I understand it, the anamorphic element needed (for the method in which it is broadcast, ie, thru Airbox and Octoshape).
    Then it is compressed with Compressor: This setting unsquishes it horizontally putting it back into a 16.9 ration, but in a smaller size, 720 x 405, and makes it into a special type of mpeg 2 format which is called a 'program stream' for broadcasting over 'Airbox' which the viewer also has a choice of using 'octoshape' for viewing. This puts the video and audio together as 1 element.
    Would like to bypass After Effects and just do movie in FCP with an output that will accomplish the above (see summary below too). I assume that the compression with Compressor will still be necessary to get the specialized mpeg 2 format need for the 'airbox' broadcasting.
    Summary: Would like to produce a fcp output that allows for the 1024 x 576 size, pal widescreen, anamorphic and then can be compressed to the special mpeg 2 program stream which ends up with the 720 x 405 (16.9). Know how to make preset, just need to know what elements to incorporate for the preset.
    Side Note: We are told we need to start out with the larger size of 1024 x 576 for better quality. Our video dept would prefer that we start out with HD size of 1920 x 1080 but our equipment cant process files that large, so video dept said ok to do the 1024 size.
    Ok, Wow, if you are still with me, I thank you a million times over and wonder what you think?
    Lots and lots of thanks dear ones,
    With most sincere thanks,
    Hope

    Dear Nick,
    Thank you for this timely response and explanation. Appreciate you taking the time to answer this.
    Am using fcp 6.0.6
    Are there certain settings that I could make/change to structure a custom preset to accomplish this?
    Thanks again...
    Hope

  • 1024 x 576 display,  text going large and ruining page ??

    Hi
    ive just tested a page from my site,
    Mt navigation bar buttons are not displaying, ?
    also he page contents text is being displayed large
    and ruining the page and makiing it toally un readable.
    Screen size is from a netbook.
    site is www.amberroom-salon.co.uk/contact
    any ideas?
    thanks

    4 Errors.
    Line 21, Column 51: there is no attribute "target"
    …          <a href="http://www.local-image.co.uk" target="
    Line 25, Column 12: there is no attribute "align"
    <div align="center"><img src="images/amber_room_opening.jpg" class="bg"></div>
    Line 25, Column 78: end tag for "img" omitted, but OMITTAG NO was specified
    <div align="center"><img src="images/amber_room_opening.jpg" class="bg"></div>
    Line 25, Column 72: required attribute "alt" not specified
    <div align="center"><img src="images/amber_room_opening.jpg" class="bg"></div>
    I have never really understood the validator. It confuses me,
    Like the above, is from the index page.
    especially the target one, as far as im aware thats normal/correct ? unless its out of date or something?
    same with align , ??  it it because its all meant to be done in css now or something??
    on the other pages with the navigation, theres 53 errors

  • 1024 x 576 H.264 unwatchable due to video stuttering

    The video is an mp4 and was encoded (by people who should know what they are doing) and is listed as being iPad friendly.
    When I watch the video the audio is fine but the video itself stutters constantly.
    Oddly enough watching the video in iTunes leads to no audio but video is fine.
    Any suggestions?
    Message was edited by: ShaneGC

    The video is an mp4 and was encoded (by people who should know what they are doing) and is listed as being iPad friendly.
    MP4 is a file container. Are we talking about MPEG-4 or H.264 (MPEG-4/AVC) video content in the MP4 container? (I.e., there are different display/data rate restrictions here for the iPad which may not apply to the video as being played back in iTunes. As to the audio, don't know why there would be a problem but knowing what the audio compression format/specs are might give us a starting point for possible problems.

  • Exporting DV PAL Quicktime 1024 x 576

    Hi there -
    I'm looking for advice about a HD project I'm working on.
    It's being shot PAL on a Sony Z1. Here are the final specs the client has asked for:
    An uncompressed quicktime, 1024x576 DV PAL WIDESCREEN Square Pixels
    I'm not sure what capture preset I should use for this purpose. Should I downconvert to DV from the start or would there be a benefit to working in HD? Is 1024x576 a size I can capture at?
    Final question! For uncompressed, do I set codec to 'None' or use one of the 'Uncompressed' options?
    many thanks,
    Lisa

    Hi
    An "uncompressed quicktime, 1024x576 DV PAL WIDESCREEN Square Pixels !!!!"
    DV PAL is not square pixels !
    DV PAL is not uncompressed !
    Your client doesn't know what he is talking about. Widescreen DV are always anamorphic.
    Just use Compressor to convert your HD timeline to DV PAL ANAMORPHIC 48 KHZ. Path in compressor settings : Other worflows= Advanced format conversions = Standard definitions = DV PAL ANAMORPHIC.
    Uncompressed quicktime is also anamorphic and not 1024x576 Square Pixels. You can also use Compressor to export SD 10 bit uncompressed Pal or SD 8 bit uncompressed Pal. Same path in compressor.
    Hung

  • Lego mindstorms: Is it possible to change the fixed user interface size of 1024 x 800 to smaller for use with netbooks?

    I teach at a school that is using netbooks next
    year - the screen size is 1024 x 576 for one model and 1024 x 600 for another model and color quality is 32 bit.  To
    our dismay, when we loaded Lego Mindstorms software to test it, we
    discovered that the user interface is fixed at 1024 x 800, which means
    the control panel at the bottom of the screen is inaccessible on the
    netbooks.  Is there a way to change the  interface size so that we can
    use the software on netbooks?  This is a serious issue for us!  Thanks
    for any help.
    I posted this question in the LabView for Lego Enthusiasts forum, but noticed that nothing new has been posted by the moderator since 2007.  That's why I posted it in an active forum.  Thanks.
    Message Edited by mwert on 03-27-2009 11:33 AM
    Melissa J. Wert
    Technology Integration Specialist
    Harpeth Hall School
    Solved!
    Go to Solution.

    Hi All,
    To echo Dennis Knight and as a FYI for others I refer everyone to KnowledgeBase 44DF7BQ0 How Does National Instruments Support The LEGO® MINDSTORMS® NXT Software And ... 
    Joshua B.
    National Instruments
    NI Services
    NI Support Resources
    NI Training Resources

  • Mini-DVI to S-Video resolution

    I've plugged my Mini-DVI to S-Video adapter into the MacBook, but there is only limited selection of resolutions available in the NTSC/PAL preference pane. My Mac mini S-Video adapter has options for 16:9 output, but the MacBook only lists the following (none are 16:9 resolutions):
    640 x 480
    720 x 480
    720 x 576
    800 x 600
    1024 x 768
    Any ideas how I can get the MacBook to output 16:9 widescreen via the S-Video adapter?
    Thanks very much, Rich

    Thanks namke, had no idea that rectangular pixels were employed to achieve widescreen on a TV - you learn something new everyday!
    I wondered what other MacBook users get when they plug in the mini dvi to s-video adpater because 16:9 resolution is an option when a DVI adapter is plugged into my Mac mini (e.g. 1024 x 576), but not my MacBook.

  • Hardware Graphics Acceleration

    As many users have noticed, there’s a new feature which is introduced in Office 2013 called "Hardware Graphics Acceleration", which sometimes is also called as "GPU rendering". The purpose of course is to improve performance.
    As stated in the System Requirements for Office 2013, Graphics hardware acceleration requires a DirectX10 graphics card and a 1024 x 576 or higher resolution monitor.
    A graphics processor helps increase the performance of certain features, such as drawing tables in Excel 2013 or transitions, animations, and video integration in PowerPoint 2013. Use of a graphics processor with Office 2013 requires a Microsoft DirectX
    10-compliant graphics processor that has 64 MB of video memory. These processors were widely available in 2007. Most computers that are available today include a graphics processor that meets or exceeds this standard. But, if you or your users do not have
    a graphics processor, you can still run Office 2013.
    (http://technet.microsoft.com/en-us/library/ee624351(v=office.15).aspx)
    The option of hardware graphics acceleration can be found in any Office applications from
    FILE -> Options -> Advanced ->
    Display -> Disable hardware graphics acceleration:
    This setting can be controlled by the following registry key:
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure
    that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, 
    http://support.microsoft.com/kb/322756
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\Graphics
    DWORD: DisableHardwareAcceleration
    Value: 1 to disable, 0 to enable
    Administrators can deploy this setting using Group Policy as well. Follow the steps below:
    Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these
    problems can be solved. Modify the registry at your own risk.
    1. Add the following files to your domain controller: Office15.admx and
    Office15.adml files to your domain controller and then
    2. In the Local Group Policy Editor, select the Miscellaneous node of the
    Microsoft Office 2013 tree. This setting is shown in the following figure.
    For more information about how to use .admx and .adml files for Group Policy administration, go to the following Microsoft TechNet website:
    How to manage Group Policy ADMX files
    Please note the change is global: Changing this option in a single Office program also applies to other remaining Office programs. So you don't need to follow these steps for all Office programs one by one. If you want to just disable animations in Word
    but leave them on in Outlook, no we can’t.
    When do we need to disable Hardware Graphics Acceleration?
    I’ve seen in some cases users complain that Office Applications are laggy and slow, sometimes even hang/freeze. They have tried many things but couldn’t figure out the root. Actually, the animation sometimes can slow the performance down, once they disable
    the Hardware Graphics Acceleration, the problem is gone.
    There are also issues like blurred text/font, cursor hangs randomly in Office applications, we can disable this simple option to see if this fixes the problem.
    Please note, the Hardware Graphics Acceleration option is not the only option that may cause issues. For example, an user needs to turn off the animation to improve the performance of Excel, but it doesn’t have any effects after disabling Hardware Graphics
    Acceleration. Now let’s check this Windows setting:
    On the Desktop, right click on This PC(or Computer) icon, select
    Properties, then Advanced system settings on the left side, under
    Advanced tab, click on the Settings button for
    Performance.
    Now we see this:
    Uncheck the box for Animate controls and elements inside windows, click
    OK button.
    Now the problem should be gone.
    Another case:
    If you have blurred text/font issue in Word, you may consider to disable Hardware Graphics Acceleration. If this doesn’t help, what to do next?
    Please go to FILE tab -> Options ->
    Advanced -> Under Disable hardware graphics acceleration, there’s a checkbox for
    Use Subpixel positioning to smooth fonts on screen, uncheck it and click
    OK. The blurred text/font should be gone.
    Summary
    In this article I introduced how to configure Hardware Graphics Acceleration from applications, the registry and Group Policy. There are also some issues it may cause and what we should do to resolve them. If you have any ideas about this topic or any other
    comment, please feel free to post in the forum, thank you.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    prasoonblueluck,
    Have you installed these drivers?
    John B @ forum.notebookreview.com

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

  • Mini-DV to S-video out resolutions

    I read a number of posts here about monitor/TV screen resolution conflicts, but I want to make sure I have this straight...
    When I connect my 24" iMac to a standard 4:3 TV with Apple's mini-DV to S-video adapter, the monitor resolution reduces from 1920x1200 to match the TV screen's lower res, with a large black border covering much of the monitor.
    This is OK if I'm just showing a QT movie, but I want to see After Effects footage on the TV as I work on it. And I need to work on the footage full-screen on the iMac.
    Any way around this problem using the $20 adapter? If not, is there a 3rd-party solultion?
    Thanks,
    Andy
    2.33 GHz Intel iMac   Mac OS X (10.4.8)  

    Thanks namke, had no idea that rectangular pixels were employed to achieve widescreen on a TV - you learn something new everyday!
    I wondered what other MacBook users get when they plug in the mini dvi to s-video adpater because 16:9 resolution is an option when a DVI adapter is plugged into my Mac mini (e.g. 1024 x 576), but not my MacBook.

  • Analog TV with Mac mini

    A have a Philips widescreen TV connected via DVI to Video Adapter. In the TV i have a converter from S-video to scart.
    My problems are:
    Why can i not get a widescreen resolution (1024 x 576) with the PAL frequency (50hz). Is there a way to fix this?
    Even if i was prepared for a bad resolution, i was not prepared for the lousy picture quality. The colors seemes to be out of place and the edges are not straigth. Is there a way to fix this?

    If you have a normal tv then I assume you have scart in the right? I also assume you have the converter cable that connects from your mac mini to the TV.
    You need to do some testing, have the computer monitor in the same room as your TV so you can connect and disconnect the mac mini. If you can connect the monitor and the cable to the TV at the same time to the mac mini you can see what's happening.
    Why don't you leave the settings as default on the TV and connect the cables, set your resolution on the mac mini first to 800x600, turn on the TV and press the AV button (its usually the same button that you press when switching over to the VCR or press 0 on the remote)
    If you don't see the mac mini screen, connect it to the computer monitor. Go to System Preferences >Display >Color> select PAL or NTSC (I think you mentioned you PAL). Check also the button "Detect Display".
    Its pretty an easy job getting the mac over to the TV if you have the right cable which I presume you do. But as I said I have only an iBook G4.

  • Screen artifacts while playing games with catalyst

    Hello. I recently switched back to Arch Linux (64-bit) and I'm running with the catalyst-hook package from Vi0L0's inofficial repository. When I play games, or also when I'm using hardware acceleration in VLC, these artifacts appear on the screen. They disappear quickly if you update the screen, so they are not so prevalent on the actual gaming screen. They however flood my second screen. In case of VLC they are just constantly blinking all over the place. I've googled the issue, but couldn't find anything that helped. If I alt-tab out of the game all artifacts disappear, but then reapper later after I've continued playing for a few minutes. This is very annoying.
    Is there anything that can fix this? Please help!
    This is the Xorg0.log right after I played a game where the issues occured:
    [ 3.543]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 3.543] X Protocol Version 11, Revision 0
    [ 3.543] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 3.543] Current Operating System: Linux tank 3.10.10-1-ARCH #1 SMP PREEMPT Fri Aug 30 11:30:06 CEST 2013 x86_64
    [ 3.543] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4d130cf6-f14a-4398-8b10-656bd875daab rw quiet nomodeset
    [ 3.543] Build Date: 01 July 2013 10:48:42AM
    [ 3.543]
    [ 3.543] Current version of pixman: 0.30.2
    [ 3.543] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 3.543] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 3.543] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 6 21:38:22 2013
    [ 3.544] (==) Using config file: "/etc/X11/xorg.conf"
    [ 3.544] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 3.547] (==) ServerLayout "aticonfig Layout"
    [ 3.547] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 3.547] (**) | |-->Monitor "<default monitor>"
    [ 3.547] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 3.547] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
    Using a default monitor configuration.
    [ 3.547] (==) Automatically adding devices
    [ 3.547] (==) Automatically enabling devices
    [ 3.547] (==) Automatically adding GPU devices
    [ 3.561] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 3.561] Entry deleted from font path.
    [ 3.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 3.568] Entry deleted from font path.
    [ 3.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 3.569] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 3.569] Entry deleted from font path.
    [ 3.569] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 3.569] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 3.569] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 3.569] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 3.572] (II) Loader magic: 0x7fdc20
    [ 3.572] (II) Module ABI versions:
    [ 3.572] X.Org ANSI C Emulation: 0.4
    [ 3.572] X.Org Video Driver: 14.1
    [ 3.572] X.Org XInput driver : 19.1
    [ 3.572] X.Org Server Extension : 7.0
    [ 3.574] (--) PCI:*(0:1:0:0) 1002:6719:1682:3121 rev 0, Mem @ 0xd0000000/268435456, 0xfdac0000/131072, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
    [ 3.576] Initializing built-in extension Generic Event Extension
    [ 3.576] Initializing built-in extension SHAPE
    [ 3.576] Initializing built-in extension MIT-SHM
    [ 3.576] Initializing built-in extension XInputExtension
    [ 3.576] Initializing built-in extension XTEST
    [ 3.576] Initializing built-in extension BIG-REQUESTS
    [ 3.576] Initializing built-in extension SYNC
    [ 3.576] Initializing built-in extension XKEYBOARD
    [ 3.576] Initializing built-in extension XC-MISC
    [ 3.576] Initializing built-in extension SECURITY
    [ 3.576] Initializing built-in extension XINERAMA
    [ 3.576] Initializing built-in extension XFIXES
    [ 3.576] Initializing built-in extension RENDER
    [ 3.576] Initializing built-in extension RANDR
    [ 3.576] Initializing built-in extension COMPOSITE
    [ 3.576] Initializing built-in extension DAMAGE
    [ 3.576] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3.576] Initializing built-in extension DOUBLE-BUFFER
    [ 3.576] Initializing built-in extension RECORD
    [ 3.576] Initializing built-in extension DPMS
    [ 3.576] Initializing built-in extension X-Resource
    [ 3.576] Initializing built-in extension XVideo
    [ 3.576] Initializing built-in extension XVideo-MotionCompensation
    [ 3.576] Initializing built-in extension XFree86-VidModeExtension
    [ 3.576] Initializing built-in extension XFree86-DGA
    [ 3.576] Initializing built-in extension XFree86-DRI
    [ 3.576] Initializing built-in extension DRI2
    [ 3.576] (II) "glx" will be loaded by default.
    [ 3.576] (II) LoadModule: "glx"
    [ 3.581] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 3.583] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 3.583] compiled for 6.9.0, module version = 1.0.0
    [ 3.584] Loading extension GLX
    [ 3.584] (II) LoadModule: "fglrx"
    [ 3.584] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 3.626] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 3.626] compiled for 1.4.99.906, module version = 13.20.5
    [ 3.626] Module class: X.Org Video Driver
    [ 3.627] (II) Loading sub module "fglrxdrm"
    [ 3.627] (II) LoadModule: "fglrxdrm"
    [ 3.627] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 3.628] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 3.628] compiled for 1.4.99.906, module version = 13.20.5
    [ 3.628] (II) AMD Proprietary Linux Driver Version Identifier:13.20.5
    [ 3.628] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.11
    [ 3.628] (II) AMD Proprietary Linux Driver Build Date: Aug 15 2013 07:30:53
    [ 3.628] (++) using VT number 7
    [ 3.641] (WW) Falling back to old probe method for fglrx
    [ 3.649] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 3.650] ukiDynamicMajor: found major device number 249
    [ 3.650] ukiDynamicMajor: found major device number 249
    [ 3.650] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 3.650] ukiOpenDevice: node name is /dev/ati/card0
    [ 3.650] ukiOpenDevice: open result is 12, (OK)
    [ 3.824] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 3.824] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 3.931] (--) Chipset Supported AMD Graphics Processor (0x6719) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
    [ 3.932] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 3.933] (II) fglrx(0): pEnt->device->identifier=0x2770af0
    [ 3.933] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
    [ 3.933] (II) Loading sub module "vgahw"
    [ 3.933] (II) LoadModule: "vgahw"
    [ 3.933] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 3.934] (II) Module vgahw: vendor="X.Org Foundation"
    [ 3.934] compiled for 1.14.2, module version = 0.1.0
    [ 3.934] ABI class: X.Org Video Driver, version 14.1
    [ 3.934] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 3.934] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 3.934] (==) fglrx(0): Default visual is TrueColor
    [ 3.934] (==) fglrx(0): RGB weight 888
    [ 3.934] (II) fglrx(0): Using 8 bits per RGB
    [ 3.934] (==) fglrx(0): Buffer Tiling is ON
    [ 3.934] (II) Loading sub module "fglrxdrm"
    [ 3.934] (II) LoadModule: "fglrxdrm"
    [ 3.934] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 3.934] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 3.934] compiled for 1.4.99.906, module version = 13.20.5
    [ 3.935] ukiDynamicMajor: found major device number 249
    [ 3.935] ukiDynamicMajor: found major device number 249
    [ 3.935] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 3.935] ukiOpenDevice: node name is /dev/ati/card0
    [ 3.935] ukiOpenDevice: open result is 14, (OK)
    [ 3.935] ukiOpenByBusid: ukiOpenMinor returns 14
    [ 3.935] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 3.936] (**) fglrx(0): NoAccel = NO
    [ 3.936] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 3.936] (--) fglrx(0): Chipset: "AMD Radeon HD 6900 Series " (Chipset = 0x6719)
    [ 3.936] (--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x3121)
    [ 3.936] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 3.936] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    [ 3.936] (--) fglrx(0): MMIO registers at 0xfdac0000
    [ 3.936] (--) fglrx(0): I/O port at 0x0000de00
    [ 3.936] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 4.063] (II) fglrx(0): AC Adapter is used
    [ 4.067] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 4.067] (II) Loading sub module "vbe"
    [ 4.067] (II) LoadModule: "vbe"
    [ 4.067] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 4.068] (II) Module vbe: vendor="X.Org Foundation"
    [ 4.068] compiled for 1.14.2, module version = 1.1.0
    [ 4.068] ABI class: X.Org Video Driver, version 14.1
    [ 4.068] (II) fglrx(0): VESA BIOS detected
    [ 4.069] (II) fglrx(0): VESA VBE Version 3.0
    [ 4.069] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 4.069] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 4.069] (II) fglrx(0): VESA VBE OEM Software Rev: 13.10
    [ 4.069] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
    [ 4.069] (II) fglrx(0): VESA VBE OEM Product: C2050200-100
    [ 4.069] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 4.069] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 4.069] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 4.069] (II) fglrx(0): PCIE card detected
    [ 4.069] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 4.069] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 4.069] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf800000000, MCFBSize = 0x80000000)
    [ 4.069] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 4.069] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 4.069] (==) fglrx(0): Center Mode is disabled
    [ 4.069] (II) Loading sub module "fb"
    [ 4.069] (II) LoadModule: "fb"
    [ 4.069] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4.070] (II) Module fb: vendor="X.Org Foundation"
    [ 4.070] compiled for 1.14.2, module version = 1.0.0
    [ 4.070] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4.070] (II) Loading sub module "ddc"
    [ 4.070] (II) LoadModule: "ddc"
    [ 4.070] (II) Module "ddc" already built-in
    [ 4.327] (II) fglrx(0): Output DFP1 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP2 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP3 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP4 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP5 using monitor section 0-DFP5
    [ 4.327] (**) fglrx(0): Option "PreferredMode" "1920x1080"
    [ 4.327] (**) fglrx(0): Option "Position" "0 0"
    [ 4.327] (**) fglrx(0): Option "Disable" "false"
    [ 4.327] (**) fglrx(0): Option "Rotate" "normal"
    [ 4.327] (**) fglrx(0): Option "TargetRefresh" "60"
    [ 4.327] (II) fglrx(0): Output DFP6 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP7 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP8 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP9 has no monitor section
    [ 4.327] (II) fglrx(0): Output DFP10 using monitor section 0-DFP10
    [ 4.327] (**) fglrx(0): Option "PreferredMode" "1920x1080"
    [ 4.327] (**) fglrx(0): Option "Position" "3600 0"
    [ 4.327] (**) fglrx(0): Option "Disable" "false"
    [ 4.327] (**) fglrx(0): Option "Rotate" "normal"
    [ 4.327] (**) fglrx(0): Option "TargetRefresh" "60"
    [ 4.327] (II) fglrx(0): Output DFP11 has no monitor section
    [ 4.327] (II) fglrx(0): Output CRT1 using monitor section 0-CRT1
    [ 4.327] (**) fglrx(0): Option "PreferredMode" "1680x1050"
    [ 4.327] (**) fglrx(0): Option "Position" "1920 0"
    [ 4.327] (**) fglrx(0): Option "Disable" "false"
    [ 4.327] (**) fglrx(0): Option "Rotate" "normal"
    [ 4.327] (**) fglrx(0): Option "TargetRefresh" "60"
    [ 4.327] (II) Loading sub module "ddc"
    [ 4.327] (II) LoadModule: "ddc"
    [ 4.327] (II) Module "ddc" already built-in
    [ 4.327] (II) fglrx(0): Connected Display0: DFP5
    [ 4.327] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 4.327] (II) fglrx(0): Manufacturer: BNQ Model: 7b0c Serial#: 21573
    [ 4.327] (II) fglrx(0): Year: 2010 Week: 12
    [ 4.327] (II) fglrx(0): EDID Version: 1.3
    [ 4.327] (II) fglrx(0): Digital Display Input
    [ 4.327] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 4.327] (II) fglrx(0): Gamma: 2.20
    [ 4.327] (II) fglrx(0): DPMS capabilities: Off
    [ 4.327] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 4.327] (II) fglrx(0): Default color space is primary color space
    [ 4.327] (II) fglrx(0): First detailed timing is preferred mode
    [ 4.327] (II) fglrx(0): redX: 0.637 redY: 0.349 greenX: 0.333 greenY: 0.605
    [ 4.327] (II) fglrx(0): blueX: 0.148 blueY: 0.061 whiteX: 0.312 whiteY: 0.329
    [ 4.327] (II) fglrx(0): Supported established timings:
    [ 4.327] (II) fglrx(0): 720x400@70Hz
    [ 4.327] (II) fglrx(0): 640x480@60Hz
    [ 4.327] (II) fglrx(0): 640x480@75Hz
    [ 4.327] (II) fglrx(0): 800x600@60Hz
    [ 4.327] (II) fglrx(0): 800x600@75Hz
    [ 4.327] (II) fglrx(0): 832x624@75Hz
    [ 4.327] (II) fglrx(0): 1024x768@60Hz
    [ 4.327] (II) fglrx(0): 1024x768@75Hz
    [ 4.327] (II) fglrx(0): 1280x1024@75Hz
    [ 4.327] (II) fglrx(0): 1152x864@75Hz
    [ 4.327] (II) fglrx(0): Manufacturer's mask: 0
    [ 4.327] (II) fglrx(0): Supported standard timings:
    [ 4.327] (II) fglrx(0): #0: hsize: 1024 vsize 576 refresh: 60 vid: 49249
    [ 4.327] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 4.327] (II) fglrx(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 4.327] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 4.327] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.327] (II) fglrx(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 4.327] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 4.327] (II) fglrx(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 4.327] (II) fglrx(0): Supported detailed timing:
    [ 4.327] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 4.327] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.327] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 4.327] (II) fglrx(0): Serial No: Z3A01515SL0
    [ 4.327] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 4.327] (II) fglrx(0): Monitor name: BenQ V2220
    [ 4.327] (II) fglrx(0): EDID (in hex):
    [ 4.327] (II) fglrx(0): 00ffffffffffff0009d10c7b45540000
    [ 4.327] (II) fglrx(0): 0c14010380301b782e1421a359559b26
    [ 4.327] (II) fglrx(0): 0f5054a56b8061c0810081c081408180
    [ 4.327] (II) fglrx(0): a9c0b300d1c0023a801871382d40582c
    [ 4.327] (II) fglrx(0): 4500dd0c1100001e000000ff005a3341
    [ 4.327] (II) fglrx(0): 3031353135534c300a20000000fd0032
    [ 4.327] (II) fglrx(0): 4c1e5311000a202020202020000000fc
    [ 4.327] (II) fglrx(0): 0042656e512056323232300a2020005f
    [ 4.327] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 4.327] (II) fglrx(0): Connected Display1: DFP10
    [ 4.327] (II) Quirked EDID physical size to 0x0 cm
    [ 4.327] (II) fglrx(0): Display1 EDID data ---------------------------
    [ 4.327] (II) fglrx(0): Manufacturer: GSM Model: 1 Serial#: 16843009
    [ 4.327] (II) fglrx(0): Year: 2011 Week: 1
    [ 4.328] (II) fglrx(0): EDID Version: 1.3
    [ 4.328] (II) fglrx(0): Digital Display Input
    [ 4.328] (II) fglrx(0): Indeterminate output size
    [ 4.328] (II) fglrx(0): Gamma: 2.20
    [ 4.328] (II) fglrx(0): No DPMS capabilities specified
    [ 4.328] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 4.328] (II) fglrx(0): First detailed timing is preferred mode
    [ 4.328] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 4.328] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 4.328] (II) fglrx(0): Supported established timings:
    [ 4.328] (II) fglrx(0): 720x400@70Hz
    [ 4.328] (II) fglrx(0): 640x480@60Hz
    [ 4.328] (II) fglrx(0): 800x600@60Hz
    [ 4.328] (II) fglrx(0): 1024x768@60Hz
    [ 4.328] (II) fglrx(0): Manufacturer's mask: 0
    [ 4.328] (II) fglrx(0): Supported standard timings:
    [ 4.328] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4.328] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 148.5 MHz Image Size: 160 x 90 mm
    [ 4.328] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 84.8 MHz Image Size: 160 x 90 mm
    [ 4.328] (II) fglrx(0): h_active: 1360 h_sync: 1432 h_sync_end 1568 h_blank_end 1776 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 798 v_border: 0
    [ 4.328] (II) fglrx(0): Ranges: V min: 58 V max: 62 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
    [ 4.328] (II) fglrx(0): Monitor name: LG TV
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 4.328] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 4.328] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 148.5 MHz Image Size: 160 x 90 mm
    [ 4.328] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 4.328] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 4.328] (II) fglrx(0): Number of EDID sections to follow: 1
    [ 4.328] (II) fglrx(0): EDID (in hex):
    [ 4.328] (II) fglrx(0): 00ffffffffffff001e6d010001010101
    [ 4.328] (II) fglrx(0): 01150103801009780aee91a3544c9926
    [ 4.328] (II) fglrx(0): 0f5054a10800714f8180010101010101
    [ 4.328] (II) fglrx(0): 010101010101023a801871382d40582c
    [ 4.328] (II) fglrx(0): 4500a05a0000001e1b2150a051001e30
    [ 4.328] (II) fglrx(0): 48883500a05a0000001c000000fd003a
    [ 4.328] (II) fglrx(0): 3e1e5310000a202020202020000000fc
    [ 4.328] (II) fglrx(0): 004c472054560a2020202020202001e2
    [ 4.328] (II) fglrx(0): End of Display1 EDID data --------------------
    [ 4.328] (II) fglrx(0): Connected Display2: CRT1
    [ 4.328] (II) fglrx(0): Display2 EDID data ---------------------------
    [ 4.328] (II) fglrx(0): Manufacturer: GSM Model: 4e79 Serial#: 335802
    [ 4.328] (II) fglrx(0): Year: 2007 Week: 8
    [ 4.328] (II) fglrx(0): EDID Version: 1.3
    [ 4.328] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 4.328] (II) fglrx(0): Sync: Separate SyncOnGreen
    [ 4.328] (II) fglrx(0): Max Image Size [cm]: horiz.: 43 vert.: 27
    [ 4.328] (II) fglrx(0): Gamma: 2.20
    [ 4.328] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 4.328] (II) fglrx(0): First detailed timing is preferred mode
    [ 4.328] (II) fglrx(0): redX: 0.651 redY: 0.333 greenX: 0.277 greenY: 0.614
    [ 4.328] (II) fglrx(0): blueX: 0.145 blueY: 0.082 whiteX: 0.313 whiteY: 0.329
    [ 4.328] (II) fglrx(0): Supported established timings:
    [ 4.328] (II) fglrx(0): 720x400@70Hz
    [ 4.328] (II) fglrx(0): 640x480@60Hz
    [ 4.328] (II) fglrx(0): 640x480@75Hz
    [ 4.328] (II) fglrx(0): 800x600@56Hz
    [ 4.328] (II) fglrx(0): 800x600@60Hz
    [ 4.328] (II) fglrx(0): 800x600@75Hz
    [ 4.328] (II) fglrx(0): 832x624@75Hz
    [ 4.328] (II) fglrx(0): 1024x768@60Hz
    [ 4.328] (II) fglrx(0): 1024x768@75Hz
    [ 4.328] (II) fglrx(0): 1280x1024@75Hz
    [ 4.328] (II) fglrx(0): 1152x864@75Hz
    [ 4.328] (II) fglrx(0): Manufacturer's mask: 0
    [ 4.328] (II) fglrx(0): Supported standard timings:
    [ 4.328] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 4.328] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 4.328] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.328] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 4.328] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 119.0 MHz Image Size: 434 x 270 mm
    [ 4.328] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 4.328] (II) fglrx(0): Supported detailed timing:
    [ 4.328] (II) fglrx(0): clock: 146.2 MHz Image Size: 434 x 270 mm
    [ 4.328] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
    [ 4.328] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 4.328] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz
    [ 4.328] (II) fglrx(0): Monitor name: L204WS
    [ 4.328] (II) fglrx(0): EDID (in hex):
    [ 4.328] (II) fglrx(0): 00ffffffffffff001e6d794eba1f0500
    [ 4.328] (II) fglrx(0): 081101036a2b1b78ead105a655479d25
    [ 4.328] (II) fglrx(0): 155054a76b80950f950081808140714f
    [ 4.328] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
    [ 4.328] (II) fglrx(0): 3600b20e1100001a21399030621a2740
    [ 4.328] (II) fglrx(0): 68b03600b20e1100001c000000fd0038
    [ 4.328] (II) fglrx(0): 4b1c530f000a202020202020000000fc
    [ 4.328] (II) fglrx(0): 004c32303457530a202020202020004c
    [ 4.328] (II) fglrx(0): End of Display2 EDID data --------------------
    [ 4.328] (II) fglrx(0): Dynamic Surface Resizing Enabled
    [ 4.330] (II) fglrx(0): EDID for output DFP1
    [ 4.330] (II) fglrx(0): EDID for output DFP2
    [ 4.330] (II) fglrx(0): EDID for output DFP3
    [ 4.330] (II) fglrx(0): EDID for output DFP4
    [ 4.330] (II) fglrx(0): EDID for output DFP5
    [ 4.330] (II) fglrx(0): Manufacturer: BNQ Model: 7b0c Serial#: 21573
    [ 4.330] (II) fglrx(0): Year: 2010 Week: 12
    [ 4.330] (II) fglrx(0): EDID Version: 1.3
    [ 4.330] (II) fglrx(0): Digital Display Input
    [ 4.330] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 4.330] (II) fglrx(0): Gamma: 2.20
    [ 4.330] (II) fglrx(0): DPMS capabilities: Off
    [ 4.330] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 4.330] (II) fglrx(0): Default color space is primary color space
    [ 4.330] (II) fglrx(0): First detailed timing is preferred mode
    [ 4.330] (II) fglrx(0): redX: 0.637 redY: 0.349 greenX: 0.333 greenY: 0.605
    [ 4.330] (II) fglrx(0): blueX: 0.148 blueY: 0.061 whiteX: 0.312 whiteY: 0.329
    [ 4.330] (II) fglrx(0): Supported established timings:
    [ 4.330] (II) fglrx(0): 720x400@70Hz
    [ 4.330] (II) fglrx(0): 640x480@60Hz
    [ 4.330] (II) fglrx(0): 640x480@75Hz
    [ 4.330] (II) fglrx(0): 800x600@60Hz
    [ 4.330] (II) fglrx(0): 800x600@75Hz
    [ 4.330] (II) fglrx(0): 832x624@75Hz
    [ 4.330] (II) fglrx(0): 1024x768@60Hz
    [ 4.330] (II) fglrx(0): 1024x768@75Hz
    [ 4.330] (II) fglrx(0): 1280x1024@75Hz
    [ 4.330] (II) fglrx(0): 1152x864@75Hz
    [ 4.330] (II) fglrx(0): Manufacturer's mask: 0
    [ 4.330] (II) fglrx(0): Supported standard timings:
    [ 4.330] (II) fglrx(0): #0: hsize: 1024 vsize 576 refresh: 60 vid: 49249
    [ 4.330] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 4.330] (II) fglrx(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 4.330] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 4.330] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.330] (II) fglrx(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 4.330] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 4.330] (II) fglrx(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.330] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 4.330] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.330] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 4.330] (II) fglrx(0): Serial No: Z3A01515SL0
    [ 4.330] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 4.330] (II) fglrx(0): Monitor name: BenQ V2220
    [ 4.330] (II) fglrx(0): EDID (in hex):
    [ 4.330] (II) fglrx(0): 00ffffffffffff0009d10c7b45540000
    [ 4.330] (II) fglrx(0): 0c14010380301b782e1421a359559b26
    [ 4.330] (II) fglrx(0): 0f5054a56b8061c0810081c081408180
    [ 4.330] (II) fglrx(0): a9c0b300d1c0023a801871382d40582c
    [ 4.330] (II) fglrx(0): 4500dd0c1100001e000000ff005a3341
    [ 4.330] (II) fglrx(0): 3031353135534c300a20000000fd0032
    [ 4.330] (II) fglrx(0): 4c1e5311000a202020202020000000fc
    [ 4.330] (II) fglrx(0): 0042656e512056323232300a2020005f
    [ 4.330] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
    [ 4.330] (II) fglrx(0): Printing probed modes for output DFP5
    [ 4.330] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
    [ 4.330] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync +vsync (55.5 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1360x1024"x60.0 119.00 1360 1728 1760 1840 1024 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1280x1024"x75.0 114.50 1280 1328 1360 1440 1024 1027 1034 1061 -hsync +vsync (79.5 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1280x1024"x60.0 91.00 1280 1328 1360 1440 1024 1027 1034 1054 -hsync +vsync (63.2 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1440x900"x60.0 97.75 1440 1648 1680 1760 900 903 908 926 -hsync +vsync (55.5 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1280x960"x60.0 85.25 1280 1328 1360 1440 960 963 967 988 -hsync +vsync (59.2 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1280x800"x60.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1280x768"x60.0 71.00 1280 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1024x768"x75.0 70.50 1024 1072 1104 1184 768 771 775 796 -hsync +vsync (59.5 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "1024x768"x60.0 56.00 1024 1072 1104 1184 768 771 775 790 -hsync +vsync (47.3 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "800x600"x75.0 44.75 800 848 880 960 600 603 607 622 -hsync +vsync (46.6 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "800x600"x60.0 35.50 800 848 880 960 600 603 607 618 -hsync +vsync (37.0 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "640x480"x75.0 29.75 640 688 720 800 480 483 487 498 -hsync +vsync (37.2 kHz e)
    [ 4.330] (II) fglrx(0): Modeline "640x480"x60.0 23.50 640 688 720 800 480 483 487 494 -hsync +vsync (29.4 kHz e)
    [ 4.330] (II) fglrx(0): EDID for output DFP6
    [ 4.330] (II) fglrx(0): EDID for output DFP7
    [ 4.330] (II) fglrx(0): EDID for output DFP8
    [ 4.330] (II) fglrx(0): EDID for output DFP9
    [ 4.330] (II) Quirked EDID physical size to 0x0 cm
    [ 4.330] (II) fglrx(0): EDID for output DFP10
    [ 4.330] (II) fglrx(0): Manufacturer: GSM Model: 1 Serial#: 16843009
    [ 4.330] (II) fglrx(0): Year: 2011 Week: 1
    [ 4.330] (II) fglrx(0): EDID Version: 1.3
    [ 4.330] (II) fglrx(0): Digital Display Input
    [ 4.330] (II) fglrx(0): Indeterminate output size
    [ 4.330] (II) fglrx(0): Gamma: 2.20
    [ 4.330] (II) fglrx(0): No DPMS capabilities specified
    [ 4.330] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 4.330] (II) fglrx(0): First detailed timing is preferred mode
    [ 4.330] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 4.330] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 4.330] (II) fglrx(0): Supported established timings:
    [ 4.330] (II) fglrx(0): 720x400@70Hz
    [ 4.330] (II) fglrx(0): 640x480@60Hz
    [ 4.330] (II) fglrx(0): 800x600@60Hz
    [ 4.330] (II) fglrx(0): 1024x768@60Hz
    [ 4.330] (II) fglrx(0): Manufacturer's mask: 0
    [ 4.330] (II) fglrx(0): Supported standard timings:
    [ 4.330] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4.330] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.330] (II) fglrx(0): clock: 148.5 MHz Image Size: 160 x 90 mm
    [ 4.330] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.330] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.330] (II) fglrx(0): clock: 84.8 MHz Image Size: 160 x 90 mm
    [ 4.330] (II) fglrx(0): h_active: 1360 h_sync: 1432 h_sync_end 1568 h_blank_end 1776 h_border: 0
    [ 4.330] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 798 v_border: 0
    [ 4.330] (II) fglrx(0): Ranges: V min: 58 V max: 62 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
    [ 4.330] (II) fglrx(0): Monitor name: LG TV
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.330] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 4.330] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.330] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.330] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 4.330] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 4.330] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.330] (II) fglrx(0): clock: 148.5 MHz Image Size: 160 x 90 mm
    [ 4.330] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 4.330] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 4.330] (II) fglrx(0): Supported detailed timing:
    [ 4.331] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
    [ 4.331] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 4.331] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 4.331] (II) fglrx(0): Number of EDID sections to follow: 1
    [ 4.331] (II) fglrx(0): EDID (in hex):
    [ 4.331] (II) fglrx(0): 00ffffffffffff001e6d010001010101
    [ 4.331] (II) fglrx(0): 01150103801009780aee91a3544c9926
    [ 4.331] (II) fglrx(0): 0f5054a10800714f8180010101010101
    [ 4.331] (II) fglrx(0): 010101010101023a801871382d40582c
    [ 4.331] (II) fglrx(0): 4500a05a0000001e1b2150a051001e30
    [ 4.331] (II) fglrx(0): 48883500a05a0000001c000000fd003a
    [ 4.331] (II) fglrx(0): 3e1e5310000a202020202020000000fc
    [ 4.331] (II) fglrx(0): 004c472054560a2020202020202001e2
    [ 4.331] (II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
    [ 4.331] (II) fglrx(0): Printing probed modes for output DFP10
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1085 1095 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x59.9 74.18 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x50.0 148.50 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (56.2 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x59.9 148.35 1776 1864 1908 2200 1000 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x50.0 74.25 1776 2304 2348 2640 1000 1005 1015 1125 interlace +hsync +vsync (28.1 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x25.0 74.25 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (28.1 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x24.0 74.25 1776 2414 2458 2750 1000 1004 1009 1125 +hsync +vsync (27.0 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x59.9 74.18 1776 1864 1908 2200 1000 1005 1015 1125 interlace +hsync +vsync (33.7 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1776x1000"x30.0 74.18 1776 1864 1908 2200 1000 1004 1009 1125 +hsync +vsync (33.7 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x50.0 148.50 1680 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x59.9 148.35 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x30.0 74.25 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x25.0 74.25 1680 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x24.0 74.25 1680 2558 2602 2750 1050 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x30.0 74.18 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1680x1050"x24.0 74.18 1680 2558 2602 2750 1050 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x50.0 148.50 1400 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x59.9 148.35 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x30.0 74.25 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x25.0 74.25 1400 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x24.0 74.25 1400 2558 2602 2750 1050 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x30.0 74.18 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1400x1050"x24.0 74.18 1400 2558 2602 2750 1050 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1600x900"x50.0 148.50 1600 2304 2348 2640 900 1004 1009 1125 +hsync +vsync (56.2 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1600x900"x59.9 148.35 1600 1864 1908 2200 900 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1600x900"x25.0 74.25 1600 2304 2348 2640 900 1004 1009 1125 +hsync +vsync (28.1 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1600x900"x24.0 74.25 1600 2414 2458 2750 900 1004 1009 1125 +hsync +vsync (27.0 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1600x900"x30.0 74.18 1600 1864 1908 2200 900 1004 1009 1125 +hsync +vsync (33.7 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x60.0 148.50 1360 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x50.0 148.50 1360 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x59.9 148.35 1360 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x30.0 74.25 1360 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (33.8 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x25.0 74.25 1360 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x24.0 74.25 1360 2558 2602 2750 1024 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x30.0 74.18 1360 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x1024"x24.0 74.18 1360 2558 2602 2750 1024 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x1024"x50.0 148.50 1280 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x1024"x60.0 91.00 1280 1328 1360 1440 1024 1027 1034 1054 -hsync +vsync (63.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x1024"x25.0 74.25 1280 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x1024"x30.0 74.18 1280 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x1024"x24.0 74.18 1280 2558 2602 2750 1024 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1440x900"x50.0 148.50 1440 2304 2348 2640 900 1004 1009 1125 +hsync +vsync (56.2 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1440x900"x59.9 148.35 1440 1864 1908 2200 900 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1440x900"x25.0 74.25 1440 2304 2348 2640 900 1004 1009 1125 +hsync +vsync (28.1 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1440x900"x24.0 74.25 1440 2414 2458 2750 900 1004 1009 1125 +hsync +vsync (27.0 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1440x900"x30.0 74.18 1440 1864 1908 2200 900 1004 1009 1125 +hsync +vsync (33.7 kHz ez)
    [ 4.331] (II) fglrx(0): Modeline "1280x960"x50.0 148.50 1280 2448 2492 2640 960 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x960"x60.0 91.00 1280 1328 1360 1440 960 1027 1034 1054 -hsync +vsync (63.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x960"x25.0 74.25 1280 2448 2492 2640 960 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x960"x30.0 74.18 1280 2008 2052 2200 960 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1280x960"x24.0 74.18 1280 2558 2602 2750 960 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x768"x50.0 148.50 1360 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x768"x60.0 84.75 1360 1432 1568 1776 768 771 776 798 -hsync +vsync (47.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x768"x25.0 74.25 1360 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x768"x30.0 74.18 1360 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1360x768"x24.0 74.18 1360 2558 2602 2750 768 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1152x864"x50.0 148.50 1152 2448 2492 2640 864 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1152x864"x59.9 148.35 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 4.331] (II) fglrx(0): Modeline "1152x864"x75.0 88.00 1152 1200 1232 1312 864 867 871 895 -hsync +vsync (67.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1152x864"x25.0 74.25 1152 2448 2492 2640 864 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1152x864"x30.0 74.18 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1152x864"x24.0 74.18 1152 2558 2602 2750 864 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x768"x50.0 148.50 1280 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x768"x60.0 91.00 1280 1328 1360 1440 768 1027 1034 1054 -hsync +vsync (63.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x768"x25.0 74.25 1280 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x768"x30.0 74.18 1280 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x768"x24.0 74.18 1280 2558 2602 2750 768 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x25.0 74.25 1280 2448 2492 2640 720 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x30.0 74.18 1280 2008 2052 2200 720 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x24.0 74.18 1280 2558 2602 2750 720 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x50.0 148.50 1024 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x25.0 74.25 1024 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x30.0 74.18 1024 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x24.0 74.18 1024 2558 2602 2750 768 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x60.0 56.00 1024 1072 1104 1184 768 771 775 790 -hsync +vsync (47.3 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz ez)
    [ 4.332] (II) fglrx(0): Modeline "1152x648"x59.9 74.18 1152 1262 1302 1650 648 653 658 750 +hsync +vsync (45.0 kHz ez)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x50.0 148.50 800 2448 2492 2640 600 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x25.0 74.25 800 2448 2492 2640 600 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x30.0 74.18 800 2008 2052 2200 600 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x24.0 74.18 800 2558 2602 2750 600 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x60.0 35.50 800 848 880 960 600 603 607 618 -hsync +vsync (37.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "720x480"x50.0 148.50 720 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "720x480"x25.0 74.25 720 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "720x480"x30.0 74.18 720 2008 2052 2200 480 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "720x480"x24.0 74.18 720 2558 2602 2750 480 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x50.0 148.50 640 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x25.0 74.25 640 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (28.1 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x30.0 74.18 640 2008 2052 2200 480 1084 1089 1125 +hsync +vsync (33.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x24.0 74.18 640 2558 2602 2750 480 1084 1089 1125 +hsync +vsync (27.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4.332] (II) fglrx(0): EDID for output DFP11
    [ 4.332] (II) fglrx(0): EDID for output CRT1
    [ 4.332] (II) fglrx(0): Manufacturer: GSM Model: 4e79 Serial#: 335802
    [ 4.332] (II) fglrx(0): Year: 2007 Week: 8
    [ 4.332] (II) fglrx(0): EDID Version: 1.3
    [ 4.332] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 4.332] (II) fglrx(0): Sync: Separate SyncOnGreen
    [ 4.332] (II) fglrx(0): Max Image Size [cm]: horiz.: 43 vert.: 27
    [ 4.332] (II) fglrx(0): Gamma: 2.20
    [ 4.332] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 4.332] (II) fglrx(0): First detailed timing is preferred mode
    [ 4.332] (II) fglrx(0): redX: 0.651 redY: 0.333 greenX: 0.277 greenY: 0.614
    [ 4.332] (II) fglrx(0): blueX: 0.145 blueY: 0.082 whiteX: 0.313 whiteY: 0.329
    [ 4.332] (II) fglrx(0): Supported established timings:
    [ 4.332] (II) fglrx(0): 720x400@70Hz
    [ 4.332] (II) fglrx(0): 640x480@60Hz
    [ 4.332] (II) fglrx(0): 640x480@75Hz
    [ 4.332] (II) fglrx(0): 800x600@56Hz
    [ 4.332] (II) fglrx(0): 800x600@60Hz
    [ 4.332] (II) fglrx(0): 800x600@75Hz
    [ 4.332] (II) fglrx(0): 832x624@75Hz
    [ 4.332] (II) fglrx(0): 1024x768@60Hz
    [ 4.332] (II) fglrx(0): 1024x768@75Hz
    [ 4.332] (II) fglrx(0): 1280x1024@75Hz
    [ 4.332] (II) fglrx(0): 1152x864@75Hz
    [ 4.332] (II) fglrx(0): Manufacturer's mask: 0
    [ 4.332] (II) fglrx(0): Supported standard timings:
    [ 4.332] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 4.332] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 4.332] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 4.332] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 4.332] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 4.332] (II) fglrx(0): Supported detailed timing:
    [ 4.332] (II) fglrx(0): clock: 119.0 MHz Image Size: 434 x 270 mm
    [ 4.332] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 4.332] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 4.332] (II) fglrx(0): Supported detailed timing:
    [ 4.332] (II) fglrx(0): clock: 146.2 MHz Image Size: 434 x 270 mm
    [ 4.332] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
    [ 4.332] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 4.332] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz
    [ 4.332] (II) fglrx(0): Monitor name: L204WS
    [ 4.332] (II) fglrx(0): EDID (in hex):
    [ 4.332] (II) fglrx(0): 00ffffffffffff001e6d794eba1f0500
    [ 4.332] (II) fglrx(0): 081101036a2b1b78ead105a655479d25
    [ 4.332] (II) fglrx(0): 155054a76b80950f950081808140714f
    [ 4.332] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
    [ 4.332] (II) fglrx(0): 3600b20e1100001a21399030621a2740
    [ 4.332] (II) fglrx(0): 68b03600b20e1100001c000000fd0038
    [ 4.332] (II) fglrx(0): 4b1c530f000a202020202020000000fc
    [ 4.332] (II) fglrx(0): 004c32303457530a202020202020004c
    [ 4.332] (II) fglrx(0): User Preference Output CRT1 using refresh rate 60.0 Hz.
    [ 4.332] (II) fglrx(0): Printing probed modes for output CRT1
    [ 4.332] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz UeP)
    [ 4.332] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1600x900"x60.0 119.00 1600 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1360x1024"x60.0 119.00 1360 1728 1760 1840 1024 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1152x864"x60.0 119.00 1152 1728 1760 1840 864 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 4.332] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 4.332] (II) fglrx(0): Output DFP1 disconnected
    [ 4.332] (II) fglrx(0): Output DFP2 disconnected
    [ 4.332] (II) fglrx(0): Output DFP3 disconnected
    [ 4.332] (II) fglrx(0): Output DFP4 disconnected
    [ 4.332] (II) fglrx(0): Output DFP5 connected
    [ 4.332] (II) fglrx(0): Output DFP6 disconnected
    [ 4.332] (II) fglrx(0): Output DFP7 disconnected
    [ 4.332] (II) fglrx(0): Output DFP8 disconnected
    [ 4.332] (II) fglrx(0): Output DFP9 disconnected
    [ 4.332] (II) fglrx(0): Output DFP10 connected
    [ 4.332] (II) fglrx(0): Output DFP11 disconnected
    [ 4.332] (II) fglrx(0): Output CRT1 connected
    [ 4.332] (II) fglrx(0): Using user preference for initial modes
    [ 4.332] (II) fglrx(0): Output DFP5 using initial mode 1920x1080
    [ 4.332] (II) fglrx(0): Output DFP10 using initial mode 1920x1080
    [ 4.332] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
    [ 4.332] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4.332] (II) fglrx(0): DPI set to (96, 96)
    [ 4.332] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 4.332] (II) fglrx(0): Adapter AMD Radeon HD 6900 Series has 6 configurable heads and 3 displays connected.
    [ 4.332] (==) fglrx(0): PseudoColor visuals disabled
    [ 4.332] (II) Loading sub module "ramdac"
    [ 4.332] (II) LoadModule: "ramdac"
    [ 4.333] (II) Module "ramdac" already built-in
    [ 4.333] (==) fglrx(0): NoDRI = NO
    [ 4.333] (==) fglrx(0): Capabilities: 0x00000000
    [ 4.333] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 4.333] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 4.333] (==) fglrx(0): UseFastTLS=0
    [ 4.333] (II) fglrx(0): Desktop Vsync is enabled.
    [ 4.333] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
    [ 4.333] (--) Depth 24 pixmap format is 32 bpp
    [ 4.333] Loading extension ATIFGLRXDRI
    [ 4.333] (II) fglrx(0): doing swlDriScreenInit
    [ 4.333] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 4.333] ukiDynamicMajor: found major device number 249
    [ 4.333] ukiDynamicMajor: found major device number 249
    [ 4.333] ukiDynamicMajor: found major device number 249
    [ 4.333] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 4.333] ukiOpenDevice: node name is /dev/ati/card0
    [ 4.333] ukiOpenDevice: open result is 15, (OK)
    [ 4.333] ukiOpenByBusid: ukiOpenMinor returns 15
    [ 4.333] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 4.333] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 4.333] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
    [ 4.333] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 4.333] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0212a1a000
    [ 4.333] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 4.333] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 4.333] (II) fglrx(0): swlDriScreenInit done
    [ 4.333] (II) fglrx(0): Kernel Module Version Information:
    [ 4.333] (II) fglrx(0): Name: fglrx
    [ 4.333] (II) fglrx(0): Version: 13.20.5
    [ 4.333] (II) fglrx(0): Date: Aug 15 2013
    [ 4.333] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 4.333] (II) fglrx(0): Kernel Module version matches driver.
    [ 4.333] (II) fglrx(0): Kernel Module Build Time Information:
    [ 4.333] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.10-1-ARCH
    [ 4.333] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    [ 4.333] (II) fglrx(0): Build-Kernel __SMP__: yes
    [ 4.333] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 4.333] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 4.335] (II) fglrx(0): Display width adjusted to to 5632 due to alignment constraints
    [ 4.335] (II) fglrx(0): DRI initialization successfull
    [ 4.335] (II) fglrx(0): FBADPhys: 0xf800000000 FBMappedSize: 0x02940000
    [ 4.336] (==) fglrx(0): Backing store disabled
    [ 4.336] Loading extension FGLRXEXTENSION
    [ 4.336] (==) fglrx(0): DPMS enabled
    [ 4.336] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 4.336] (**) fglrx(0): Textured Video is enabled.
    [ 4.336] (II) LoadModule: "glesx"
    [ 4.337] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 4.346] (II) Module glesx: vendor="X.Org Foundation"
    [ 4.346] compiled for 1.4.99.906, module version = 1.0.0
    [ 4.346] Loading extension GLESX
    [ 4.346] (II) fglrx(0): GLESX enableFlags = 592
    [ 4.346] (II) fglrx(0): GLESX is enabled
    [ 4.346] (II) LoadModule: "amdxmm"
    [ 4.346] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 4.347] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 4.347] compiled for 1.4.99.906, module version = 2.0.0
    [ 4.372] Loading extension AMDXVOPL
    [ 4.372] Loading extension AMDXVBA
    [ 4.374] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 4.375] (II) fglrx(0): Enable composite support successfully
    [ 4.375] (II) fglrx(0): X context handle = 0x1
    [ 4.375] (II) fglrx(0): [DRI] installation complete
    [ 4.375] (==) fglrx(0): Silken mouse enabled
    [ 4.375] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 4.375] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4.522] (--) RandR disabled
    [ 4.527] ukiDynamicMajor: found major device number 249
    [ 4.527] ukiDynamicMajor: found major device number 249
    [ 4.527] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 4.527] ukiOpenDevice: node name is /dev/ati/card0
    [ 4.527] ukiOpenDevice: open result is 16, (OK)
    [ 4.527] ukiOpenByBusid: ukiOpenMinor returns 16
    [ 4.527] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 4.527] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
    [ 4.550] ukiDynamicMajor: found major device number 249
    [ 4.550] ukiDynamicMajor: found major device number 249
    [ 4.550] ukiDynamicMajor: found major device number 249
    [ 4.550] ukiOpenDevice: node name is /dev/ati/card0
    [ 4.550] ukiOpenDevice: open result is 17, (OK)
    [ 4.550] ukiGetBusid returned 'PCI:1:0:0'
    [ 4.550] ukiOpenDevice: node name is /dev/ati/card1
    [ 4.550] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card2
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card3
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card4
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card5
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card6
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card7
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card8
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card9
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card10
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card11
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card12
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card13
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card14
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card15
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: open result is -1, (No such device)
    [ 4.551] ukiOpenDevice: Open failed
    [ 4.551] ukiDynamicMajor: found major device number 249
    [ 4.551] ukiOpenByBusid: Searching for BusID PCI:1:0:0
    [ 4.551] ukiOpenDevice: node name is /dev/ati/card0
    [ 4.551] ukiOpenDevice: open result is 17, (OK)
    [ 4.551] ukiOpenByBusid: ukiOpenMinor returns 17
    [ 4.551] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
    [ 4.68

    Here it is, sorry for the delay, I kinda gave up for a while:
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Monitor"
    Identifier "0-DFP5"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1920x1080"
    EndSection
    Section "Monitor"
    Identifier "0-DFP10"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "3600 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1920x1080"
    EndSection
    Section "Monitor"
    Identifier "0-CRT1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "1920 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1680x1050"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    Option "Monitor-DFP5" "0-DFP5"
    Option "Monitor-DFP10" "0-DFP10"
    Option "Monitor-CRT1" "0-CRT1"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Virtual 5520 1920
    Depth 24
    EndSubSection
    EndSection
    Last edited by xeekei (2013-09-12 22:47:09)

  • Grainy photos in PrE 11 slideshow when burning to DVD. I have read numerous topics but still problem persists. Please help.

    Well, the title pretty much says it all. I have an issue concerning grainy pictures.
    First, let me give a brief introduction on what kind of project we are dealing with here. As I have been reading these forums for hours for the past days I already have a good understanding of what is of importance, so further details below.
    Introduction:
    Video editing started to become a real hobby. I learned to edit using Pinnacle studio, but the numerous bugs and flows forced me to try something else. Adobe to me is 'the real deal' and you only learn to use a program like PrE by just doing it! So for this project I thought I might give it a go:
    I am editing a video of my uncle's funeral. The funeral has been taped for grandchildren-yet-to-come. All (but one clip) has been filmed using the same camera. However, I do not have access to the camera and I am not the camera man. When music was played during the funeral, the camera was not rolling, so I added this music myself and put a slideshow (which was shown on the day itself) during the music.
    During the project I made several quick, medium quality renders to show my cousin (who's dad has passed away) the progress I was making. During these renders, I could not note any photo quality issues. Ofcourse also because of the low quality render settings.
    Anyway. When I finished editing I was pretty happy with the end result. My cousin approved so I decided to burn it onto a DVD so it could be further distributed to the rest of the family. Burning failed initially, but later after a reboot everything worked fine. Then I played to DVD on my TV and found out that the quality of the pictures used in the slideshows was horrible. I could not even recognise faces, it was that grainy!
    First. The 'specs':
    Camera used: Sony DCR55
    Project settings: PAL > Hard disk, flash memory camcorders > Widescreen 48kHz (I live in a PAL region: Netherlands)
    UNchecked: Force selected Project Settings on this project
    Then the photos part:
    All photos JPG
    So, onto the part of 'what I have already tried' (and failed, otherwise I would not have been typing this)
    What I have tried so far after reading dozens of discussions:
    1) Check if the DVD burner was not to blame. So I burned to a folder on my HDD. Similar result as to what I see on my TV when I burn it onto a DVD and play it.
    2) Recheck project settings. Everything seems OK to me. Also when I use right-click on the added clips to check whether settings are still OK. They are. Also for the pictures, which surprised me because the widescreen video clips use non-square pixels and the photos obviously don't. (Thumbs up for Adobe)
    3) Resize pictures to used resolution (720 x 576) before adding them. No improvement, exactly the same.
    4) Turn off 'scale to 'framesize'. No difference.
    Finally, I want to address the term 'quality'. Below you will find a scaled down image to the same resolution as mentioned before, compared to a still of the DVD:
    Upper pic is rescaled using MS paint. Still looks pretty sharp.
    Bottom is a still from the DVD file. Note the 'graining' and the horizontal lines.
    This leaves me with 2 questions:
    1) What can I do to get rid of the poor quality pictures
    2) Why do I lose horizontal pixels (as can be seen in the bottom picture)
    If anyone could help me, it would be greatly appreciated!!!!!

    Dear ATR,
    I apologize for my late response. I was on holiday
    A.T. Romano schreef:
    Question...Your camera is a miniDV camcorder....what did you capture from it and into what....
    Did you do a DV data capture firewire into Premiere Elements Capture Window to get DV.avi Widescreen (any mention of Type 1 or Type 2)
    or
    Did you do HDV data capture firewire into Premiere Elements Capture Window to get HDV (MPEG2.mpg)
    From your description of your video (720 x 576) it would seem your captures gave you DV AVI Widescreen. Is that correct?
    In your run throughs so far, has the video presented as poorly as the jpegs?
    Add On...In those last 3 screenshots, what were the resolutions
    Still resized - 1920 x 1080?
    DVD-VIDEO  screen capture of video? - 720 x 576 16:9 which would display after encoding about 1054 x 576
    MP4 - ?
    First. The camera is not a miniDV camcorder, but a harddisk recorder, which is why I chose that particular preset (PAL > Hard disk, flash memory camcorders > Widescreen 48kHz). source: http://www.sony.lv/support/en/content/cnt-specs/DCR-SR55E/list
    So it's fairly easy. Shoot video's. Connect to PC and just copy paste the video files of the camera onto the computer.
    This gives a resolution of 720x576. With a pixel aspect ratio of 1,4587 (as shown by PrE, when I click on a clip > show properties)
    The video does not really look that bad. Actually there is hardly any noticeable difference between the original un-editted videos and the edited complete version.
    Concerning the 3 screenshots.
    The first is the same as before: a rescaled image using MS Paint. Scaled from original 3264 x 1836 to 1024 x 576
    The second is a capture from the DVD file (which was burned to a folder)
    The third is a capture from a created MP4 video file
    Clearly photo 1 is the best. Photo 3 is still acceptable to me, but photo 2 (DVD) is unacceptable if you ask me.
    Hope this new info helps. Thanks for your efforts so far.

  • S10 general sluggish performanc​e and choppy video

    Hi Forum,
    My wifes S10 has become slow in general performance. All downloaded videos are choppy. Any advice?
    Thanks!
    x201....3249-CTO....i7....4GB RAM....64-bit OS....Windows 7
    Solved!
    Go to Solution.

    Hi , this could be  helpfull .. XP Startup  
    sincerely KalvinKlein 
    Want more ? For further information to get the most of your S-Class machine 
    Lenovo Energymanagement   Backup  Windows 7 Driver   Windows 7  Install 
    Clean XP Install  XP Startup   Small WebCam Guide    Lenovo Easy Capture   
    Resolution > 1024 x 576 / 600  Works with XP Only For Windows 7 Alternate driver section
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Maybe you are looking for

  • Memory upgrade on a early 2008 iMac

    Hi, I have a early 2008 24" iMac with 2 GB 800 MHz DDR2 SDRAM.  I have read conflicting information here vs. Apple support site and would just like some advise and possibly answers from someone who has my computer that has done a succesful upgrade. 

  • No automatic G/L account determination upon SSC items valuation classes

    Hi Experts Iu2019m trying to get the G/L expense account on the Purchase Order item for a Standard Service Catalog Item. Iu2019ve assigned a valuation class to valuation class field (ESLA-BKLAS) on the Catalog Header (General data sub-window) and als

  • P6N SLI , what is a good monitoring progran for temps, ect

    I read that MSI program for temp monitoring isn't good to install so what does work with out taking alot of resorces ?

  • Transferring Data from Hierarchy

    Hi Experts, We have a complex bespoke hierarchy in system, consisting of several/different levels of granularity. Hierarchy looks like as follows: <b>- Root</b> <b>-- Level 1.1</b> <b>----Level 1.1.1</b> <b>------Level 1.1.1.1</b> Leaf 1 Leaf 2 <b>--

  • PLS HELP - Column value missing when calling procedure from Oracle OLEDB provider

    When calling procedure 'sp_a(?,?,?)' from SQL_PLUS and using DBMS.OUTPUT to print the result It returns a result set as C0, C1, C2 But When I call the same procedure 'sp_a(?,?,?)' with same parameter value from MS VB6, It returns the a result set as