1043000098 000001 Error no WBS billing element found while substituting WB

Hi friends,
I am getting below error any one please suggst me.
1043000098 000001 Error no WBS billing element found while substituting WBS element 00003999
Regards,
Ramana.

First, check at sales order whether there is any billing block or incompletion log remaining.
Further refer, you can refer SAP Note 672929 - No billing because of error VF156.
Mostly this should Note should help you.
But, if still the SAP Note doesn't suffice your requirement.
Then further check is there any substitution rule active in sales order.
Or also check whether the delivering plant getting determined in sales order is relavent for the project.
Or check whether any subsituition rule is maintained for WBS Elements (TCode OPSN)which is getting triggered during billing.
Also, refer SAP Note 499389 - VA01/VF01: Check/derivation of the assigned WBS element
Regards
JP

Similar Messages

  • Error no WBS billing element found while substituting WBS element

    Hello,
    I've this error while doing an intercompany billing.
    I have to companies with cross company process in CO.
    I've one project with only one WBS element, and I've insert it in the purchase.
    I've chequed Billing documents in the WBS element.
    Any suggestion?
    Thanks in advance
    Emilio Roldan

    Dear expert
               /thread/1505596 [original link is broken]
              Error no WBS billing element found while substituting WBS element 00050923
    Regards
          Ajeesh.s

  • 0080000096 000010 Error no WBS billing element found while substituting WBS

    Hi All,
    I had created two WBS element for company code 11 and company code 12 and assigned to two respective sales orders.
    I am doing Inter billing  (T-code: VF01) from co. cd. 12 to co.cd. 11and getting error "0080000096 000010 Error no WBS billing element found while substituting WB"
    Please give your input if you faced similar type of issue earlier.
    Your support is highly appreciable.
    Many Thanks
    YG.

    Yes ...Virendra...WBS element is the billing element and that is why we are done with assignment and deliver from sales order w.r.t PO.
    Now at the time of Intercompany billing i am getting this error.....

  • Error no WBS billing element found while substituting WBS element 00050923

    Hi,
    Please give me some quick solution to overcome this error in my IDES. I have seen the note, sap help and othe rsuggession . could not get rid of this error.
    Quick response is requested.The earlier thread was also unanswered.
    Zinni

    sales order having account assignment at item level as WBS element. No substitution exist in sales side too. I went through the sapnote_0000499389. Still could not identify the reason of error.
    As further adviced by SAP , I have checked following notes, still problem could not be solved.
    672929 No billing because of error VF156
    499389 VA01/VF01: Check/derivation of the assigned WBS element
    Zinni
    Edited by: Makwana Zinni on Oct 19, 2009 6:03 AM

  • Not able to create Invoice , no WBS billing element

    Hi Friends,
    I am creating sales order>debit memo request>billing document. WBS is assigned in account assignment tab in sales order and is billing element( WBS is checked as billing element).
    But when I am creating invoice am getting message that no WBS billing element found while substituting WBS element.
    Message identification/number is VF156.
    I think it must not happen.
    Any pointers.
    Regards
    Ashu

    Hi Navaneetha,
    Thanks for your excellent reply.( am posting here since that thread is locked)
    I have created project and WBS (A) for aompany code 1000.
    After that I have created WBS(B) for company code 2000.
    Now I created sales order ( In header company code is 1000)  and assigned WBS(B) in account assignment tab.
    Now DMR is created and I am able to create invoice successfully ( though am getting message VF155 "Revenue of leading WBS element & determined by substitution from)
    but when I checked in line item detail I found that WBS( A) is assigned instead of WBS(B).
    Is it OK ? why not am I getting WBS(B) in line item detail of invoice.
    Regards
    Ashu
    Edited by: ashutosh p on Feb 2, 2011 9:39 AM
    Edited by: ashutosh p on Feb 2, 2011 10:08 AM

  • Audio usb ALSA error: No suitable mixer element found

    Hello everybody.
    I've installed arch last week. I've some problem with my usb audio. The audio usb device works but i can't use a mixer, so audio control is everytime set on max.
    I can't use my normal intel audio 'cause is broken. This is my aplay -l output:
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: AUDIO [USB AUDIO], device 0: USB Audio [USB Audio]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    When i try to play audio files on audacious, arch give me following error: Audio usb ALSA error: No suitable mixer element found.
    I've set the audio usb device as default with asoundconf. If i try to use hd intel audio, the mixer works good, but when i get back to usb audio, mixer is absent. There is a way to set a mixer for the usb audio device?
    Last edited by Kalamaius (2014-05-23 14:34:13)

    emeres wrote:
    As for the usb sound card I would try setting those parameters:
    autoclock=0/1
    ignore_ctl_error=0/1
    Kalamaius wrote:Intel audio is broken,  I've a crackling sound all time. I changed the previous sound card but the new one that my personal computer technician mounted never works properly, isn't a new card but a used one.
    Probably related to module options.
    If you simply want to control the volume it would be easy to implement a softvol plugin. But this headset should have a volume control. What is the output of:
    tree /proc/asound
    tree /proc/asound
    /proc/asound
    ├── AUDIO -> card1
    ├── card0
    │   ├── codec#0
    │   ├── codec#1
    │   ├── id
    │   ├── pcm0c
    │   │   ├── info
    │   │   └── sub0
    │   │   ├── hw_params
    │   │   ├── info
    │   │   ├── prealloc
    │   │   ├── prealloc_max
    │   │   ├── status
    │   │   └── sw_params
    │   ├── pcm0p
    │   │   ├── info
    │   │   └── sub0
    │   │   ├── hw_params
    │   │   ├── info
    │   │   ├── prealloc
    │   │   ├── prealloc_max
    │   │   ├── status
    │   │   └── sw_params
    │   ├── pcm1p
    │   │   ├── info
    │   │   └── sub0
    │   │   ├── hw_params
    │   │   ├── info
    │   │   ├── prealloc
    │   │   ├── prealloc_max
    │   │   ├── status
    │   │   └── sw_params
    │   ├── pcm6c
    │   │   ├── info
    │   │   └── sub0
    │   │   ├── hw_params
    │   │   ├── info
    │   │   ├── prealloc
    │   │   ├── prealloc_max
    │   │   ├── status
    │   │   └── sw_params
    │   └── pcm6p
    │   ├── info
    │   └── sub0
    │   ├── hw_params
    │   ├── info
    │   ├── prealloc
    │   ├── prealloc_max
    │   ├── status
    │   └── sw_params
    ├── card1
    │   ├── id
    │   ├── pcm0c
    │   │   ├── info
    │   │   └── sub0
    │   │   ├── hw_params
    │   │   ├── info
    │   │   ├── status
    │   │   └── sw_params
    │   ├── pcm0p
    │   │   ├── info
    │   │   └── sub0
    │   │   ├── hw_params
    │   │   ├── info
    │   │   ├── status
    │   │   └── sw_params
    │   ├── stream0
    │   ├── usbbus
    │   ├── usbid
    │   └── usbmixer
    ├── cards
    ├── devices
    ├── hwdep
    ├── Intel -> card0
    ├── modules
    ├── oss
    │   ├── devices
    │   └── sndstat
    ├── pcm
    ├── seq
    │   └── drivers
    ├── timers
    └── version
    20 directories, 63 files

  • XML-20108: (Fatal Error) Start of root element expected while restarting

    Hi All,
    I am work on OIM with the following configurations
    1)OS for App Server -- Linux
    2)App Server type and version -- Oracle Application Server 10g, version is 10.1.3.1.0
    3)OIM connector pack version -- 9.0.3
    I have restarted the servers and I got the following error message
    08/10/16 08:03:19 Stop process
    08/10/16 08:03:20 Shutting down...
    08/10/16 08:03:36 Start process
    08/10/16 08:08:09 WARNING: ApplicationStateRunning.loadConnectors Exception loading connector xlJMSResourceAdapterModule : Error parsing oc4j-ra.xml at /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/application-deployments/default/xlJMSResourceAdapterModule: Fatal error at line 1 offset 1 in file:/u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/connectors/xlJMSResourceAdapterModule/xlJMS ResourceAdapterModule/: .<Line 1, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
    08/10/16 08:08:09 WARNING: ApplicationStateRunning.loadConnectors Exception loading connector OracleASjms : Error parsing oc4j-ra.xml at /u01/app/oracle/product /10.1.3.1/OracleAS_1/j2ee/oim/application-deployments/default/OracleASjms: Fatal error at line 1 offset 1 in file:/u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/connectors/OracleASjms/OracleASjms/: .<Line 1, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
    Oct 16, 2008 8:08:11 AM org.jgroups.protocols.UDP createSockets
    INFO: sockets will use interface 10.201.50.124
    Oct 16, 2008 8:08:11 AM org.jgroups.protocols.UDP createSockets
    INFO: socket information:
    local_addr=10.201.50.124:46865, mcast_addr=231.184.179.146:45577, bind_addr=/10.201.50.124, ttl=1
    sock: bound to 10.201.50.124:46865, receive buffer size=64000, send buffer size= 32000
    mcast_recv_sock: bound to 10.201.50.124:45577, send buffer size=150000, receive buffer size=80000
    mcast_send_sock: bound to 10.201.50.124:46866, send buffer size=150000, receive buffer size=80000
    Can any one help me out
    Thanks in Advance

    Have you modified the DB adapter wsdl manually ? provide more error details from payload and logs.

  • Error message " [RunQueryToServer] Job Not Found " while editing Schedules

    Hi,
    We are on BPC 7.5 NW. While trying to Edit Schedules in Datamanager , an error message is received " [RunQueryToServer] Job Not Found ". Could anyone suggest what could be the reason for the issue, is it admin rights of the user involved ?
    Please do let me your suggestions.
    Best Regards,
    SAYAN

    Message starting with Z is home made message. That means the message is designed by your organization only. You should consult with your ABAP team to check the root causes of the error message. If you know the debug process , then you can check it also by debugging. To get the details of the error message, go to SE91 and the enter class ZM and message no 303, then use the option 'where used list' to check the details used of the message.

  • Error -2028 : No matching Record found while adding Incoming payment

    Hi all,
             I was trying  to add an Incoming Payment using DI API, checked both DocEntry and ChequeSum property..and all other properties and seems set as well, it would be better if you can give any solution.Thank you
    Regards
    Sijimon Sidharthan
    oPay.CardCode = oInvoice.CardCode;
                                       string sCardName=oInvoice.CardName;
                                  oPay.CardName = oInvoice.CardName;
                                  oPay.JournalRemarks = "820 Import Test" +  oInvoice.CardCode;
                                  oPay.ApplyVAT = SAPbobsCOM.BoYesNoEnum.tYES;
                                  oPay.CashSum = 189.77;
                                       int conP=oInvoice.ContactPersonCode;
                                  oPay.ContactPersonCode = oInvoice.ContactPersonCode;
                                       string cur =oInvoice.DocCurrency;
                                  oPay.DocCurrency = oInvoice.DocCurrency;
                                  oPay.DocDate = now;
                                  oPay.TaxDate = now;
                                  oPay.DocRate = 0;
                                  oPay.LocalCurrency = SAPbobsCOM.BoYesNoEnum.tYES;
                                  oPay.DocType = SAPbobsCOM.BoRcptTypes.rCustomer;//rAccount;
                                  oPay.HandWritten = SAPbobsCOM.BoYesNoEnum.tNO;
                                  oPay.Remarks = "remarks";
                                  oPay.Reference1 =iBaseRef.ToString();//"R";
    //                              oPay.TransferAccount = "10100";//OTRC doesn't contain any code
    //                              oPay.TransferDate = now;
    //                              oPay.TransferSum = 0;
                                  #region Invoice
                                  oPay.Invoices.AppliedFC = 0;
                                  oPay.Invoices.DocEntry = iBaseRef;//baseEntry;
                                       int ln=oPay.Invoices.LineNum ;
                                  oPay.Invoices.DocLine = 0;
                                  oPay.Invoices.InvoiceType = SAPbobsCOM.BoRcptInvTypes.it_Invoice;
                                  //oPay.Invoices.InvoiceType = SAPbobsCOM.BoRcptInvTypes.it_ChequesForPayment;
                                  oPay.Invoices.SumApplied = 189.77;//amount;
                                  oPay.Invoices.Add();
                                  #endregion Invoice
                                  #region Cheque
                                  oPay.Checks.BankCode ="026008866"; //"026002794";//"Leumi";
                                  oPay.Checks.CheckAccount="10200-00";//"10203";//-00";//"1HD";10203-00
                                  oPay.Checks.DueDate=Convert.ToDateTime("04/03/2007");
                                  oPay.Checks.CheckSum =189.77;
                                  oPay.Checks.CheckNumber = 12345678;
                                  oPay.Checks.Add();
                                  #endregion Cheque
    int ret=oPay.Add();
                                  if(ret!=0)
                                       int lErrCode; string sErrCode;
                                       oCompany.GetLastError(out lErrCode, out sErrCode);
                                       MessageBox.Show(ret.ToString ()+ sErrCode);

    Hi Lan,
              I tried to add IncomingPayment with another Database works fine with all these properties..think some extra settings may be there in the database now I'm working , do you have any idea regarding to solve this issue ..Thank you
    Regards
    Sijimon Sidharthan

  • Higher-level billing element for the selling company code in your network

    Hi ,
    I am getting the error " No wbs element found while substituting wbs element 00074419.at the time of creation of invoice from OBD
    I ahve refered note 672929 ,  solution is  "Define a higher-level billing element for the selling company code in your network" but then I odnt ahev anything defined in the network.
    Pls guide me how to go about it
    Regards
    Suvin.Sugathen

    HI,
    - Any of the WBSE which are hierarchically superior to your WBSE "74419" should have the relevant company code.
    Check for any such superior WBSE in your structure & assign the company code, in question,  to it. It should be a billing element also.
    this is because, while billing system checks for the proper revenue receiver cost object in the particular company code.
    regards

  • Sales Order Account Assign to Non Billing Element

    Team,
    Is it possible to account assign Sales Order (VA01) to Non Billing Element. My limited understanding was that only billing element WBS can be account assigned and Revenue or Billing can be done.
    Reg/ Tony

    But I could successfully create a Sales order and account assign to a non billing element. It didnt show any error. While billing it show only billing element WBS and thats how we noted the difference.
    we could reassign the WBS to the Billing WBS, but curious to know why it happened and how we can prevent such action by users. One option is to educate them to select wbs using search criteria WBS- Billing element. Any other options?

  • No root element found in xml

    I am facing a problem when i am trying to use TOAD. Its giving me an error like
    NO ROOT ELEMENT FOUND IN XML. Can someone help me in corrcting this Error ?
    Regards,
    Chandra deep

    NO ROOT ELEMENT FOUND IN XML. Can someone help me in
    corrcting this Error ? That means the XML document is either missing the surrounding <element> ... </element> pair or has more than one pair at the base level of the document. Resolve that and you are done.
    Now ... given that I am probably 4,000+ km away from you and can not see your screen, please look at your question and ask yourself whether you have given sufficient information for troubleshooting. <g>

  • XML Parsing Error: no element found Location:Line Number 1, Column 1:

    Hi,
    i have a servlet code in which i am using bouncy castle encryption algorithm , if i tried to run that servlet on embeded weblogic server than my servlet works fine without error.
    but if i deploy same Servlet code on SOA domain console than i get following error.
    XML Parsing Error: no element found
    Location: http://localhost:7001/Encryption-PGPEncrypt-context-root/pgpservlet
    Line Number 1, Column 1:
    Please help me friends...

    Hi Chandra,
    Based on my research, the error message is only generated by FireFox when the render page is blank in Internet. For some reason, .NET generates a response type of "application/xml" when it creates an empty page. Firefox parses the file as XML and finding
    no root element, spits out the error message.
    Also, based on your description, the other sites are opened correctly, the issue only happened in Central Administration(CA). This means the SharePoint services are working fine.
    Since this issue only occurred in the CA, it might be due the application pool for the CA is corrupted. Please try to restart the application pool for the CA to resove the issue:
    1. Open Internet Information Service(IIS)
    2. List the application pools
    3. Select the application pool used for the CA
    4. Stop it, and then start it again.
    Note, if the application pool is running in Classic mode, please change it to be Integrated mode.
    Additionally, I found a similar thread, which may help you too:
    http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/824d7dda-db03-452b-99c4-531c5c576396
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • XML Parsing Error: no element found Line Number 1, Column 1:

    Hi All,
    I have deployed EAR on my standalone server using JDEV 11.1.1.6.0. I am able to get the WSRP portlet producer page on
    http://<server>:7001/contextRoot. But when i try to click on any of the WSDL URL it gives me "XML Parsing Error: no element found Line Number 1, Column 1:"
    and from IE it gives me: XML document must have a top level element. Error processing resource
    there can be a issue with the WSRPContainer.jar file. So i have remove it from my deployment profile, EAR and lib/classpath files.
    Can you please suggest a workaround.
    Regards,
    ND
    Edited by: ND on Dec 4, 2012 9:57 PM

    Hi All,
    this error normally comes when the WLS domain is not not properly created. if you get some exception for ./provesecurity.sh file while creating the domain, then the XML error comes.
    I did not went into the depth but figured out a workaround: restart the VM/hosted box and then create the domain, remember to use diff port name while creating it from the domain creation script.
    Regards,
    ND

  • XML Parsing Error: no element found In BI Publisher

    Hi Gurus,
    I tried to get XML output for a Data Model which was based on SQL queries.
    But I got the following error in Firefox
    XML Parsing Error: no element found
    Location: http://localhost:9704/xmlpserver/servlet/xdo
    Line Number 4, Column 1:
    In IE I got an other error:
    There is no end tag for DATA_SET
    Any ideas?
    Many thanks
    Laszlo

    Hi,
    I use 11g.
    I tried to create element link when I got this error.
    Now I am using groupink.
    Without using bind variable I got result (Cartesian product)
    However if i created and used bind variable I got the same error
    this is a dept data set:
    select     "DEPARTMENTS"."DEPARTMENT_ID" as DEPTNO,
         "DEPARTMENTS"."DEPARTMENT_NAME" as "DEPARTMENT_NAME",
         "DEPARTMENTS"."LOCATION_ID" as "LOCATION_ID",
         "DEPARTMENTS"."MANAGER_ID" as "MANAGER_ID"
    from     "HR"."DEPARTMENTS" "DEPARTMENTS"
    this is the emp data set:
    select     "EMPLOYEES"."COMMISSION_PCT" as "COMMISSION_PCT",
         "EMPLOYEES"."DEPARTMENT_ID" as "DEPARTMENT_ID",
         "EMPLOYEES"."EMAIL" as "EMAIL",
         "EMPLOYEES"."EMPLOYEE_ID" as "EMPLOYEE_ID",
         "EMPLOYEES"."FIRST_NAME" as "FIRST_NAME",
         "EMPLOYEES"."HIRE_DATE" as "HIRE_DATE",
         "EMPLOYEES"."JOB_ID" as "JOB_ID",
         "EMPLOYEES"."LAST_NAME" as "LAST_NAME",
         "EMPLOYEES"."MANAGER_ID" as "MANAGER_ID"
    from     "HR"."EMPLOYEES" "EMPLOYEES"
    WHERE "EMPLOYEES"."DEPARTMENT_ID" =:DEPTNO
    Thanks for any tip!
    Laszlo

Maybe you are looking for