1045 Interface Questions AS3

Hello,
I've recently decided to take a look at AS3, and I was in the
process of seeing what kind of changes I needed to do with my code
to make it AS3 compliant. I did the changes to import the
flash.display.MovieClip class. As I was going through this circular
pattern (compile, flash tells me what's wrong, I correct it...)
this one area has stumped me.
I get the following error: "1045: Interface newI was not
found."
What am I doing wrong? Are Interfaces allowed with AS3 code?
Thanks,
Kelly

While I do not know the problem, it appears AS 3.0 does still
have interface keyword:
"interface definition keyword
Usage
interface InterfaceName [extends InterfaceName ] {}
Language Version : ActionScript 3.0
Player Version : Flash Player 9
Defines an interface. Interfaces are data types that define a
set of methods; the methods must be defined by any class that
implements the interface.
An interface is similar to a class, with the following
important differences:
* Interfaces contain only declarations of methods, not their
implementation. That is, every class that implements an interface
must provide an implementation for each method declared in the
interface.
* Interface method definitions cannot have any attribute
such as public or private, but implemented methods must be marked
as public in the definition of the class that implements the
interface.
* Multiple interfaces can be inherited by an interface by
means of the extends statement, or by a class through the
implements statement.
Unlike ActionScript 2.0, ActionScript 3.0 allows the use of
getter and setter methods in interface definitions.
Note: To use this keyword, you must specify ActionScript 2.0
and Flash Player 6 or later in the Flash tab of your FLA file's
Publish Settings dialog box. This keyword is supported only when
used in external script files, not in scripts written in the
Actions panel.
See also
class
implements
Interfaces"
From
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/
under Statements, Keywords, etc.

Similar Messages

  • Best way to interface flash AS3 with CF

    Does anyone know of any good examples of how to interface
    Flash AS3 with Coldfusion?
    Thanks!!!
    Carlos

    Unfortunately the camera does something with flash media, which could confuse the question. Do you mean that you want to use this camera for creating Adobe Flash Video content? If that's the case I would argue to use its 720p/24p mode, that would give you 24 fps 1280x720 movies that ought to work nicely in Flash, and could scale to smaller 16:9 sizes better than say a 1080i video would. You could use 720p/30p too if you want it a little smoother.
    If you have Studio 8 installed on the machine you're using, you can export straight from FCP to FLV, by choosing the Export to FLV option in the Export using QuickTime Conversion dialog.

  • 1045: Interface IFocusManagerComponent was not found.

    i get this error
    "1045: Interface IFocusManagerComponent was not found."
    any ideas why im getting this error ? ive searched around but only get flash cs5 related info
    thanks in advance

    Hi?
    Having the same problem!
    How to add library fds2_sdk\frameworks\libs\fds.swc.

  • WLS Users and Groups interface questions / observations

    I'm new to WLS, having just installed OBIEE 11g for the first time. There are some oddities in WLS around setting up Users that I'd like to ask about, to see if I'm just missing something, or if the interface really IS this bad. Please feel free to comment in any way, or to correct any statements that are erroneous. Here goes:
    1. The use of Previous and Next buttons instead of a vertical scroll bar for finding users and groups in their respective lists. What if you have several hundred users, and the one you want to modify starts with the letter 'Z'? That means clicking the Next button several dozen times. (Security Realms … myrealm … Users and Groups … Users) Not only is there no scroll bar, there's no search box either. The only way to get to a user near the end of the alphabetical listing is the Next button. Is that correct?
    2. After adding a new user, what's the next most logical thing to want to do? How about assigning that user to Groups? So why do I have to click Next several times to find that new user in the alphabetical list? I don't see a sortable 'Date Modified' field for the table of users, nor a link to the "Most Recently Added" user. Nor can I assign groups during the same action as creating the user. In the example in #1, I might have to click Next several dozen times to get to the user I just added. Is that correct?
    3. When creating a new User, immediately after clicking New, where is the most likely place that I'd want to go? How about the Name field? Right now, the cursor rests in some indeterminate location. I have to hit the Tab key 14 times, or move the mouse into the Name box and click it. The active cursor position does not default to the Name box when creating a new user. Is that correct?
    4. I don't see a 'Create Like' button for creating Users, so that existing group membership can be easily replicated. I'd like to be able to add a new employee by clicking to highlight an existing user from the same department, clicking a 'Create Like' button, then entering a new user name and password, with all group memberships assigned automatically based on the source user. The same could be said for replicating groups. I don't think that exists. Is that correct?
    5. I don't see a clean way to return to the User list on the page on which I clicked a user name. Imagine that I'm going through my entire list of users one at a time to set an attribute. I click on the user JSMITH and set the attribute. The only way to get back to JSMITH's page and select the next user list is to hit the browser's back button three times, or to click the Users and Groups breadcrumb at the top of the screen and use the Next link multiple times to find that page again. Is that correct?
    6. I don't see a way to bring up a Group and assign Users to it from a list. It appears that the only way to assign a User to a Group is to access a User profile and click Groups. If we're creating a new group that has 200 users selected from a list of 500 users, that could potentially represent somewhere between 5000 and 10000 mouse clicks. It would be much more efficient to be able to bring up a group, then select its members from a list of users. That does not appear to be possible. Is that correct?
    7. It also appears that when assigning groups for Users, the list of Available Parent Groups sorts the lowercase entries after all uppercase entries, so that groups that start with the letter 'a' fall after groups that start with 'Z'. That is not the case with the list of users. The User table uses a case-insensitive sort. Is that correct?
    8. When I want to delete more than one User, and the ones that I want to delete are on different pages, there appears to be no way to select those users from multiple pages at the same time. So, imagine that I have 500 users, and I want to delete two users, one of whom is listed on page 48, and the other on page 50. I would have to click the Next button 47 times to find the first user and delete it. At that point, the interface returns to page 1, and I have to click the Next button 49 times to reach the second user. Is that correct?

    Hi,
    Regarding your first question, you might want to press the "Customize this table" button, then select the maximum allowed amount of rows in "Number of rows displayed per page:" that would resolve some of the problems you're having with the interface. I do think this is not a great graphical tool, and there are some usability issues.
    Regarding the adding of users to groups, it seems the way you describe is the only way of doing it, however you could try using a script instead of the graphical console, the easiest way of making it is adding a user to a group while using the "Record" button on the top of the screen to get a wlst script to use as a model, then create a new script with all new users you want to add/modify.
    Regards,
    Franco.

  • HR-PDC , Time Management Interface Question

    Hi,
    I am involved in a project that links Kronos Time Management system with SAP 4.6C . Since Kronos is certified for standard interface HR-PDC, we can use it for integration without patch-work.
    For more information, go to <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/sdnservices/icc">this link</a> and on the right hand side, select Human Resources from Integration Scenarios -> Business Application Integration. Select HR-PDC from the list of interfaces available for HR.
    There are a few concerns though, the most important being related to transfer of HR mini-master data. It is mentioned in the interface documentation that SAP always sends complete master data for all employees and that deltas are not supported.
    Now, the customer has around 50,000 employees and sending data for each one of them every night doesn't seem to be a workable solution, especially when only 30-50 records change in a day. I understand that sending deltas can be accomplished through some tweaking, I am wondering why the standard interface won't support them, knowing the fact that all historical (delta) information is available from cluster PCL4.
    Although I understand that SAP themselves are in a better position to answer the question of why the interface is like that, I am asking if anyone experienced any short-comings with sending delta information. For example, perhaps the number of scenarios for which delta was to be transferred were too many and sending complete information was more suitable. So if anyone has had previous experience of working on HR-PDC, please shed some light on their experience.
    Secondly, is there a standard interface to record and send changes in Organization and Staffing (create, modifiy, delete) to a sub-system? I am talking in relation to t. code PPOME. Is HR-OCI the right interface for that???
    Thanks and regards
    Message was edited by: Shehryar Khan

    Hi,
    Thanks for the reply. It was quite helpful.
    It is fine to download time balances but downloading whole employee (mini)master data each day is a bit difficult to explain to stakeholders. Perhaps I may need to create my own driver program that populates data for modified employees only. Thoughts??? Is this the correct approach???
    As far as the second one is concerned, I am interested in downloading new/modified OM records like departments, jobs, positions, etc. It seems the same can be catered for by using HR-PDC through business object RCVPEVTREC, method receivePObject. I perhaps overlooked the interface specs.
    Thanks again and I may get back with more questions.
    Regards

  • GW Interface Questions

    We are looking for direction regarding communicating with Groupwise 7 for the purpose of generating 'Tasks', 'Alerts' and E-mail messages to individuals and groups. It has been suggested that communicating with the Groupwise Gateway API or SOAP would allow us to do this. Is there documentation in regards to how to communicate with these interfaces? If so, where would we be able to obtain them.
    We are currently using GroupWise 7.01 on NetWare 6.5. The application or service we are looking to develop will most likely be run on the Linux platform.
    Thank you in advance.
    Robert

    First ofall, there aRE developer forums accessible via nntp.
    Second, "through a GW interface" has no meaning in any language or
    universe. If you mean "can I create tasks programmatically?" Yes, via
    SOAP, object api, or api gateway. I already commented on this.
    I'll mention two other APIs
    C3PO allows CLIENT-SIDE plugins (win32 only) (eg adding a menu to client
    )...TokenAPI allows interactive use of Client (Win32 only) (eg popping
    up the busy search interface)
    now....see below
    >>>
    >>>
    >
    > Thank you for the quick response. Currently we have an admin who does
    > this manually by placing tasks in each individual's task list as a
    > reminder on appeal due dates. We assumed that if it could be done
    > manually, we could automate this function.
    Of course. All things can be automated. At worst, you reverse engineer
    the code nad write your own. But that's not what you mean
    Is there no way to do this
    > through a GroupWise interface?... or should we be developing this
    > outside of GroupWise?
    >
    Already commented. Your statement is poorly and unclearly worded, so I'm
    ignoring it, after having added what I could.
    > Just to clarify, here are our requirements:
    > We need to be able to have a process that can create Tasks on
    > employee's task lists to alert them to various milestones in the
    > appeals process. For instance, 30, 15, and 5 days before letters are
    > due, certain people should receive a task from the system to complete
    > their work.
    >
    You can create a task programmatically. Of course the user has to accept
    the tasks, otherwise they only show in the inbox, but that's eactly like
    currently. SOAP and Object API
    > -Any replies generated to these tasks need to go back to humans (a
    > receipt notification of completion)
    Well, that's nice. You can set the notification options for the task
    before sending. SOAP and object api are again good options.
    The FROM address is not settable. It is set as whoever you log in as.
    Yes you log in as the sender. Either you supply the username, password
    or you use the "Trusted Application API" to access all mailboxes as a
    trusted user. The initial generation of the Trusted Key requires Win32,
    thenceforth Object API or SOAP.
    >
    > -Some recipients of these automated messages will need to be a mailing
    > list: we need to send alert messages to certain members or groups
    >
    Why do I care. Yes yes recipients. Groupwise supports recipients.
    Recipients are good because email travels from one place to another. Of
    course if these are internet users they just get the ical equiv of the
    task, which isn't quite as good.
    Seriously, whatever, programmatically this matters very little. I guess
    I should be happy you were complete.
    > -Different messages will be sent daily, potentially many messages
    > (10-20) sent on a given day.
    >
    Yes, yes. Of course you'll have to write said program and it will some
    how be configured as to this schedule. But that's easy.
    BTW 10-20 isnt many. 20000-100000 is many. GW laughs at your feeble
    10-20 messages (well assuming they aren't 1 million recips each).
    >
    >
    > Thank you again.
    You are welcome. Now, go to developer.novell.com/groupwise . Choose
    Object API (if win32 is acceptable, it's a bit easier, more mature, and
    faster), or SOAP (cross platform, becoming the flagship), download the
    NDK, and write the durn thing. More questions? NNTP the support forums,
    and you'll find the dev forums magically too.
    >
    > Robert
    >
    >

  • User Interface Questions

    I have already programmed some dialogs in JavaScript. I'm not using Script UI, although I've played around with Script UI a little bit. Now I'm getting a bit more advanced with some user interfaces and dialogs and have a few questions:
    1. Is it possible to create a "live updating" dialog similar to InDesign's Files > New > Document, where based on a menu selection of a preset, the dialog's editboxes change their values to reflect that menu selection?
    2. Can you program something like the Presets button in InDesign's New Document dialog where the user clicks "Save Preset", names it, and then the main dialog updates with the new preset the user just created.
    3. Script UI does not have measurement friendly boxes, does it? By that I mean that when you enter inches, mm or picas, the box will translate it into the current measurement type.
    4. I love the nudge option on the measurement editboxes. Can that be done via Script UI?
    Ideally my coding needs to work in both CS2 and CS3 and I code in JavaScript because that's what I know, but if the "live updating" stuff is possible in AppleScript or VBScript I'd still like to be aware that it can be done.
    While code examples of any of this are welcome, I mostly need to know what's possible, and any starting point you can offer will help (like the name of the control). That way I can start looking things up and figuring them out.
    Thanks in advance,
    Dan

    Thanks for the answers Bob. They are exactly as I thought, but wanted to make sure. It sucks that we have to recreate (via code), things that were given to us before Script UI. I know Script UI is more powerful in some ways (and hopefully sure will get more powerful with time) but loosing measurement boxes is a big bummer. They had so many nice built in features. I feel like I need to reinvent the wheel with Script UI.
    1. Do you have any example dialogs that you could post? I can often figure out how to get a lot of stuff done by looking over examples other people have created. Especially things where one feature interacts with another, but even just a dialog with menus, text, etc so I can check out how to layout the dialog. I have created one dialog with Script UI, but am not sure if I am doing it very efficiently and I couldn't find any Script UI stuff in InDesign's sample scripts.
    2. I suspect if I use Script UI I'll have to verify that only numbers are entered into the edit fields right? I need numerical values only for what I will be doing. Any thoughts on the best way to verify it's only a number in there? Can I do that live in the dialog before the user clicks OK? Argh, all these complications make me less than enthusiastic to go to Script UI, but I really would like to be able to have a live updating dialog.

  • Flexconnect Radius Server Overwrite interface Question

    Hello All,
    Can someone confirm/comment on the following:
    In a flexconnect scenario, for site 1, i would like to source the radius requests to a remote radius (at the flexconnect site 1).  as i can understand i need to enable the RAdius Server Overwrite interface option. Is that all?
     Also, for flexconnect sites X this can also be done per WLAN X configuration. 
    Is this correct?
    Thanks

    Hi pana,
    Answers below :
    Meaning that, even if i configure the Flexconnect groups with local authentication, then how does the Flexconnect ap reach the local radius?
    When you are working with local authentication, the AP will communicate with the local RADIUS Server using the local routing in the branch office without the 802.1X traffic being sending to the WLC......the AP will communicate directly to the local radius server using it IP address and the local routing. (This communication is transparent if you see from the WLC because the WLC will not intermediate the authentication between the client and RADIUS, who will intermediate is the AP. The WLC will receive informations when the AP is in connected mode about the client and the authentication method and etc after the user was authenticated).
    Example :
                                                                                                               RADIUS SERVER
    WLC ----SWITCH L3------ROUTER----(MPLS Link)-----ROUTER---SWITCH L3---AP
    The WLC continues managing the Access Point but will  not"talk" to the RADIUS Server, who will "talk" to the RADIUS Server is the AP in the branch office using the SWITCH L3 (Asumming that you have the RADIUS in one network and the AP in another network in the same branch office)
    Understand now ?
    As i can understand, in a local switching/local authentication scenario the Flexconnect ap can only map a WLAN to local VLAN( route-able network on the remote site) that serves for the users-data plane. Then in conjunction with the radius server override option, how can this FlexconnectAP send requests to the local radius? I can only suppose that it will do so using the users locally mapped VLAN/WLAN but i cant reference this anywhere. 
    The AP will only send the requests do the local radius only if you configure the FlexConnect Local Auth and FlexConnect Group. Enabling this option the AP will use it IP Address to communicate with RADIUS without the WLC intermedianting this communication.
    Without the FlexConnect Local Auth enable in the WLAN the AP will continue directing the 802.1X requests to the WLC and the WLC will send to the RADIUS Server and in this situation if you enabled the radius overwrite interface the WLC will try to reach the RADIUS Server using the WLAN interface and not the management the interface. (You do not need the radius overwrite interface option to work with Local Auth if you want to use the AP as a Authenticatior, you only use this interface if you want that the WLC with central authentication direct the 802.1X authentications to the RADIUS)
    One information about the VLAN/WLAN is really mapped statically but you can manipulate it using the RADIUS Atrributes, changing the VLANs from the USERs based in the AD Group and after the authentication. It can work in local auth scenario or central auth scenario.
    http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob73dg/emob73/ch7_HREA.html#pgfId-1103070
    I hope it helps and if not helps i think i am not understanding the real question.

  • Interfaces questions

    I'm working through the tutorial and have a question about casting and interfaces.
    In the sample code in the tutorial, they cast other as RecanglePlus. This only makes partial sense to me. Given that the getArea() method would only work on basic rectangular/square shapes to begin with, do I still need to cast the 'other' object as a Rectangle? Presumably it would crash if I sent a circle object whether I cast the object or not.
    Thank you in advance for any clarification to this.
    public class RectanglePlus implements Relatable {
        // a method for computing the area of the rectangle
        public int getArea() {
         return width * height;
        // a method to implement Relatable
        public int isLargerThan(Relatable other) {
             RectanglePlus otherRect = (RectanglePlus)other;
             if (this.getArea() < otherRect.getArea())
                  return -1;
             else if (this.getArea() > otherRect.getArea())
                  return 1;
             else
                  return 0;              
    {code}

    robert_t wrote:
    I'm working through the tutorial and have a question about casting and interfaces.
    In the sample code in the tutorial, they cast other as RecanglePlus. This only makes partial sense to me. Given that the getArea() method would only work on basic rectangular/square shapes to begin with, do I still need to cast the 'other' object as a Rectangle? Presumably it would crash if I sent a circle object whether I cast the object or not.Yes, you would get a ClassCastException if you called that method with anything but a RectanglePlus. If the definition of an interface method depends on methods that aren't part of that interface, then chances are either both or none of those methods should be in the interface. If Area is something that a Relatable is defined to implement, then that getArea method should be part of Relatable. If not, then the interface isn't very useful.
    If you had another class Circle that implements Relatable, but doesn't have a getArea method, how would you ever use that common method to compare the two different types? You couldn't. If you make getArea an interface member, then any implementation of Relatable can return it's area, and you can leave the types as Relatable without casting to concrete types.

  • Necessary to Power off each night?--Logic/Interface Question

    Hey all....i recently purchased the M-Audio Solo Firewire and am wondering if it is necessary to "unplug"(firewire)it from the mac each night...reason why i ask is because of the VERY bright blue power light that it emits in my room...I let the mac 'sleep' everynight, but the power light stays lit...if so, how should i unplug it each night? and/or how long is it ok to keep it 'powered up'? thanks for any and all help....
    b

    If your drives dont turn off, I have a question. Are you using a UPS (Uninteruptable Power Supply)? If not, you really should consider it. The UPS is kind of a battery that takes in the fluctuating AC power and stores it and puts out a steady stream of constant rated power. Furthermore, and what they are designed for, is in the event of a power outage, they keep putting out steady power for about 20 minutes. Long enough to save your work and shut down safely. I have a nice one that I plug in my computer, my Audio and MIDI interface, and my external Hard Drives. And it has saved me more than once. When I shut down at night, the last thing I do is turn off the UPS which in affect, turns off my FireWire drives as well.

  • Another audio interface question

    hi all, esp. hangtime
    im looking at the firepod and firestudio interfaces on the presonus site to replace my mackie 1202-vlz pro. theres only 2 things im hoping to change. one thing is having a mixer rack mounted so its more stable for transporting to gigs and the other is being able to multitrack record into my computer. one question arises i cant see on the site. do the interfaces support stand alone operation? what i mean is right now i can adjust each tracks volume and eq with knobs live without dragging my computer to a gig. could i still do that if i replace the mackie with one of those?
    thanks for any help.

    Hah, I just bought a Presonus Firestudio last week! And yes, it can do stand alone operation. It stores the last setting you made (you make new settings with the presonus application) onto its flash memory. You can even adjust the volume with the knobs.

  • Printable interface question

    Hi all,
    Just a quick question, I'm attempting to print the contents of a Container, however from what I can tell, the Container has to have been painted to the screen first. If I don't paint the Container to the screen in some way (eg in a JFrame) first, it just prints out a blank page.
    Is there any way to print a container without displaying it to the screen first?
    Regards,
    Andrew.

    Hi!
    There is no need to display your component before printing can begin. In fact, one printJob can print several components at once, or you can add arbitary contents to the page (such as text or images or whatever)!
    Here is an example:
    //To start the printjob, somwhere outside the component to be printed
    public void startPrintJob() {
         Component sc = myComponentToPrint;
         try {
             PrinterJob printJob = PrinterJob.getPrinterJob();
             PageFormat pf = printJob.defaultPage();
             pf.setOrientation(PageFormat.LANDSCAPE);
             printJob.setPrintable(sc,pf);
             if (printJob.printDialog()) {
                    printJob.print();
         } catch (PrinterException ex) {
             JOptionPane.showMessageDialog(this,
                               ex.getMessage(),
                               "Printing error",
                               JOptionPane.ERROR_MESSAGE);
    /* This function should be within the component you want to print.
      * My version does some scaling to fit the page.
      * Note that this function is a member of the Printable interface,
      * which this component has to implement.
      * pi refers to the current page to be printed.
      * In this example there is only one page, so I return NO_SUCH_PAGE
      * if pi >= 1.
        public int print(Graphics g, PageFormat pf, int pi)
                              throws PrinterException {
         if (pi >= 1) {
             return Printable.NO_SUCH_PAGE;
            //Fit to page
         Graphics2D g2d = (Graphics2D)g;
         g2d.translate(pf.getImageableX(), pf.getImageableY());
         double scaleX = pf.getImageableWidth() / ((double) getWidth());
         double scaleY = pf.getImageableHeight()/ ((double) getHeight());
         g2d.scale(scaleX, scaleY);
         RepaintManager currentManager =
             RepaintManager.currentManager(this);
         currentManager.setDoubleBufferingEnabled(false);
         //Add a date to the bottom of the page
         Font f = new Font("Arial", Font.PLAIN, getWidth()/100);
         FontRenderContext frc = g2d.getFontRenderContext();
         TextLayout tl = new TextLayout("Created on " + new Date(),
                               f,frc);
         tl.draw(g2d,0,getHeight()-tl.getDescent());
         //Draw contents by calling paintComponent manually, no need to draw on screen!
         paintComponent(g2d);     
         currentManager.setDoubleBufferingEnabled(true);
         return Printable.PAGE_EXISTS;
        }

  • Implementing interfaces question

    I have a really vague question about interfaces....can't really figure out how this works...I know that interfaces only have method definitions and the implementing classes should define those methods.
    I am trying to use a DOM parser to parse an XML document. The org.w3c.dom package gives you a list of interfaces like Node, NodeList, Document etc to work on.
    Assume that i have the following code in my class:
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    Document doc = builder.parse(invoiceXML);
    NodeList itemList = doc.GetElementsByTagName("item");
    Here is what I dont understand...doc is of type Document which is an interface. How can you call the method of an interface directly in the 4th line? I thought we are only supposed to call methods on the implementing class...the problem is I dont see an implementing class here...does the builder.parse(invoiceXML) return a Document interface or an object that implements the Document interface? If 'doc' is actually an object that implements the Document interface then it makes sense here...but then will all the methods be automatically implemented in the object created by the api?

    Here is what I dont understand...doc is of type Document which is an interface. Yes.
    How can you call the method of an interface directly in the 4th line? How? Just like that.
    I thought we are only supposed to call methods on the implementing class...Methods are applied to objects, not classes.
    the problem is I dont see an implementing class here...And you don't need to. Do you need to open up your DVD player and look inside in order to push "play"?
    does the builder.parse(invoiceXML) return a Document interface or an object that implements the Document interface? Methods don't return interfaces. They return references to objects (or primitive values).
    If 'doc' is actually an object that implements the Document interface then it makes sense here...Eureka!
    but then will all the methods be automatically implemented in the object created by the api?"Automatically" is not how to think about it. The Document interface was implemented by some class, the details of which aren't important. What's important is that if you have a reference to an object of type Document, you can apply Document methods to it, according to the API for Document.

  • Cisco SG 300-10 VLAN and IP Interface Question

    Hello,
        Please forgive me if you find my question too basic. But, I would really appreciate an answer as I am having a heck of a time getting the VLANs to work. I have several VLANs configured as follows, but, my question is related only two VLANS: VLAN 104 and VLAN 2000. Followings are the screenshots.  I have connected cable from Port 6 of the switch to the NIC2 of Windows 8.1 PC. When I use GE6 as access port for VLAN 104, I am able to ping to the NIC2 configured with static IP 10.10.30.30. However, when use GE as Trunk Port for VLAN 104 and 2000, I am not able to ping the NIC2 configured with static IP 10.10.30.30 or static IP 10.10.110.30. I am using the ping utility from the GUI. 
       If there is a better way to test the trunk port, please let me know.
        At this point, I am assuming that something is wrong with my configuration as the NIC2 is unable to receive IP address.
         The other assumption is that NICs with Windows 8.1 OS does not accept Traffic from Tagged VLANS. 
    VLAN TableShowing 1-11 of 1110203050per page
    VLAN ID
    VLAN Name
    Originators
    VLAN Interface State
    Link Status 
    SNMP Traps
    1
    Default
    Enabled
    Enabled
    100
    Management A
    Static
    Disabled
    Enabled
    101
    Management B
    Static
    Disabled
    Enabled
    102
    VXLAN A
    Static
    Disabled
    Enabled
    103
    VXLAN B
    Static
    Disabled
    Enabled
    104
    vMotion
    Static
    Enabled
    Enabled
    105
    IP Storage
    Static
    Disabled
    Enabled
    106
    HQ Uplink
    Static
    Disabled
    Enabled
    107
    HQ Access
    Static
    Disabled
    Enabled
    1000
    Test VLAN
    Static
    Disabled
    Enabled
    2000
    Test2 VLAN
    Static
    Enabled
    Enabled
    Port VLAN Membership Table
    Filter:
    Interface Type
    equals to
    PortLAG
    Go
    Interface
    Mode
    Administrative VLANs
    Operational VLANs
    LAG
    GE1
    Trunk
    1UP
    1UP
    GE2
    Trunk
    1UP
    1UP
    GE3
    Trunk
    1UP
    1UP
    GE4
    Trunk
    1UP
    1UP
    GE5
    Trunk
    1UP
    1UP
    GE6
    Trunk
    1UP, 104T, 2000T
    1UP, 104T, 2000T
    GE7
    Trunk
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    GE8
    Trunk
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    GE9
    Trunk
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    GE10
    Trunk
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    1T, 100UP, 101T, 102T, 103T, 104T, 105T, 106T, 107T
    IPv4 Interface TableShowing 1-11 of 1110203050per page
    Interface
    IP Address Type
    IP Address
    Mask
    Status
    VLAN 105
    Static
    10.10.20.1
    255.255.255.0
    Valid
    VLAN 104
    Static
    10.10.30.1
    255.255.255.0
    Valid
    VLAN 2000
    Static
    10.10.110.1
    255.255.255.0
    Valid
    VLAN 1
    Static
    192.168.0.39
    255.255.255.0
    Valid
    VLAN 1000
    Static
    192.168.1.1
    255.255.255.0
    Valid
    VLAN 106
    Static
    192.168.100.1
    255.255.255.0
    Valid
    VLAN 100
    Static
    192.168.110.1
    255.255.255.0
    Valid
    VLAN 107
    Static
    192.168.130.1
    255.255.255.0
    Valid
    VLAN 102
    Static
    192.168.150.1
    255.255.255.0
    Valid
    VLAN 101
    Static
    192.168.210.1
    255.255.255.0
    Valid
    VLAN 103
    Static
    192.168.250.1
    255.255.255.0
    Valid
    Ping
    Host Definition:
    By IP address
    By name
    IP Version:
    Version 6
    Version 4
    <tr id="trSourceIP" display:none"="">
    Source IP:
    Auto10.10.20.1(VLAN105)10.10.30.1(VLAN104)10.10.110.1(VLAN2000)192.168.0.39(VLAN1)192.168.1.1(VLAN1000)192.168.100.1(VLAN106)192.168.110.1(VLAN100)192.168.130.1(VLAN107)192.168.150.1(VLAN102)192.168.210.1(VLAN101)192.168.250.1(VLAN103)Autofe80::5267:aeff:fe3d:83b3(VLAN1)Auto10.10.20.1(VLAN105)10.10.30.1(VLAN104)10.10.110.1(VLAN2000)192.168.0.39(VLAN1)192.168.1.1(VLAN1000)192.168.100.1(VLAN106)192.168.110.1(VLAN100)192.168.130.1(VLAN107)192.168.150.1(VLAN102)192.168.210.1(VLAN101)192.168.250.1(VLAN103)fe80::5267:aeff:fe3d:83b3(VLAN1)
    Destination IPv6 Address Type:
    Link Local
    Global
    Link Local Interface:
    VLAN 1
    Destination IP Address/Name:
    Ping Interval:
    Use Default
    User Defined
    ms (Range: 0 - 65535, Default: 2000)
    Number of Pings:
    Use Default
    User Defined
    (Range: 1 - 65535, Default: 4)
    Status:

    Tom and Michal, your response is much appreciated. You are 100% right. The issue was with the Windows recognizing the VLAN tags. I have tested trunking by using the vmxnet3 driver from VMware and it works. 
    I had another question where I can use your help too. I am not sure how to connect two Cisco SG300 switches - one with L3 mode and the second one with L2 mode. I have configured GVRP for Port 5 of both switches and run a cable connecting to Port 5 of each switch. I have made port 5 of both switches trunk mode ( 1U, 1000T). I have created VLAN 1000 on both switches. With L3 switch, I have added IP Interface (192.168.100.1) to VLAN 1000. My issues is that, I am not able to access the management port (192.168.1.238) of the L2 switch. Note that the L2 switch has only on uplink, which is to the L3 switch. Since the Port 5 also receives untagged traffic from VLAN1 (192.168.1.1), I am assuming that it would receive the management network from VLAN1. 

  • MSI GT70 2PE 880m Bus Interface Question

    I recently purchased an MSI GT70 2PE with an nvidia 880m gpu
    The question i have is should the card be running with a bus interface of x4 at all times?
    gpu load when other screenshot was taken:
    The above is a screenshot of gpu-z while running its render test
    the bus interface always reads x4 3.0 even with games such as planetside 2 running at max settings
    I am on the latest nvidia driver and did install the vbios update from msi
    From other forums ive gathered it should be running at x8 when idle but should be reaching x16 when running games or stressing the card?
    If so is there any way to get it to work correctly?
    Edit:
    The only other state i have seen it in is this:
    which is x4 1.1

    Quote from: zipper.sippola on 05-August-14, 02:13:36
    Probably GPU-Z isn't up-to-date with 880M; my 680M is recognized as x16.
    This is probably it. Even though the 880m is a refresh of 780m and has been out a while. There are still plenty of programs and utilities that don't even identify it or know what it is. I'm sure things will get better.
    If you really need/want to know if it is 4x or 16x lanes, then run a game on it with clear documentation of settings for that chip and results on a non multiplayer game. If your laptop isn't running all 16 lanes, then it should run far slower than the rest.

Maybe you are looking for

  • Load from flat file confusion

    hi i have to load data using 2 flat files with different level of details file 1 has data::: Order...........ordertypes....amount$....Rule... 111.................z11.................100.........XYZ1 111.................z12.................100........

  • Deploying an ADF BC application in JDEv 10.1.2

    Hi: I have a webapplication developed with ADF BC, Struts, and JSP in JDev10.1.2. It consists of the normal model and view projects. It seems to work from local server. I would like to create the deployment profiles and deploy it on the test server.

  • Changes in basic start dates and its effects

    Dear All , Greetings!!!! Can you please guide me in "changes in basic start dates in Prod Ord". Actually,We are now starting to plan order creation as following parameters:                                                  Schedulling type:- Capacity

  • Nvidia driver not being used?? [solved]

    Hello, Xorg doesn't use the nvidia drivers but the vesa drivers :? hwd -s gives: Video      : nVidia Corp.|NV11 geForce2 100/200 server: Xorg (vesa)   Driver     : xf86-video-vesa Strange, I followed the instructions described in the wiki page and I

  • Adobe Reader will not switch settings when I try to print something.

    I have a product created using Adobe AIR. I have a portion where a pdf is loaded into a window, and they print it. When we change what paper they are going to print on (different dimensions), it does not take effect. We have to load it in a native PD