-1074360278 Unknown GIGE Vision error

I feel stupid asking if anyone knows what an unknown error is... but anyway, if anyone has ever seen such an error with NI-IMAQdx.
It happens at "IMAQdx Start Acquisition.vi". I'm a using Dalsa GigE camera if that helps and I have LV2010 + VDM 2010SP1 and VAS August 2010.
Thanks in advance for any help
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

I have seen this.
When a connection is first made to an unknown camera the first thing that happens is that an xml is downloaded from the camera.
the xml is generated by the camera and contains information for a client (like labview) about which features this particular camera has.
The particular camera I had reported features in the xml, that was actually not available from the interface..
hence when labview tried to enable the features, this error occurs.
Sometimes you can get the camera to work in MAX (Tools->Measurement & Acquisition eXplorer)
And then determine which attributes causes it to chrash.
Sometimes you cannot, and needs to modify the xml...
Engineer, M.Sc. Autonomous Systems, Automation and Control of non-linear systems
Project Engineer @ R&D A/S
www.rdas.dk

Similar Messages

VAS - Unknown USB3 Vision error

The TwoCameras.VI was created to simulate the use case of the two USB3 cameras I am using in my application. After anywhere from 500 to 5000 cycles I receive the following error for either one of my cameras:
-1074360304: Unable to set attribute.
Upon restarting my application in hopes to restore the camera session, I receive an error when trying to connect to the camera that previously faulted.
-1074360261: Unknown USB3 Vision error.
To restore use of the camera I cycle power to the faulted camera and the camera then can communicate with the IMAQdx drivers again.
Adding wait time between the IMAQdx steps did not affect this outcome.
For testing purposes, I modified the TwoCameras.VI to run only one camera. This program ran for 10,000 cycles with no error for each camera. Possibly not enough cycles to prove that one camera works, but still pretty convincing since it worked for 10,000 cycles on each camera.
I again modified TwoCameras.VI to only acquire images and not write settings as well as vise-versa (write settings, but not acquiring) for both cameras. This did not produce any errors after 10,000 cycles for each test.
Am I overlooking something about the IMAQdx VAS library?
Hardware
Basler Monochrome Camera (acA2500-14um)
Basler Color Camera (acA2500-14uc)
WIndows 8.1 PC, 64 bit
3 meter USB3 compliant cables away from High Voltage AC/DC power
Software
VAS - Aug 2013
LV 2013 13.0f2
Considerations
1. I have not updated the firmware of the Basler camera nor have I contacted Basler
Attachments:
USB3 Error.zip ‏79 KB

Alejandro,
Thanks for the response.
1. I am curious what the article means by, "IMAQdx driver goes through the camera driver". I have selected in MAX to use the 'NI-IMAQdx USB3 Vision Device' Driver. This is the only option as I have not installed a Basler driver. So how does the IMAQdx driver use an underlying Basler driver?
2. This is good example for my use case. It does not write settings while the acquisition is stopped, which is the core difference, as well as only one camera session being open at a time (hence the non-simultaneity). I am able to grab over 500 images before error which suggests to me that the driver does support simultaneity; however, the issue may occur infrequently and may be caused by the simultaneity. Once I have the hardware again, i will try the following:
a. Remove the WriteSettings.VI. This will isolate whether it is the writing of the settings or the starting/stopping of the camera session.
b. Remove simultaneity. I will make sure I only have one camera session open at a time. I am curious if this will cause any other issues since I am repeating this many times at a fast rate...opening and closing camera sessions that is.
3. Again good examples. The most applicable is probably the IMAQdx - Four Cameras. Again though, I have tried running just acquisitions and I do not get errors. One difference I spotted is that the buffer size is 10. So the other test I will run would be to:
a. Increase buffer size to 10
Any other info is appreciated.

HT1339 hi i reset the settings on my ipod and when i connected it to my laptop its not recognized. It shows unknown device code error 43, and its not recognized when i connect to itunes.

Hi I went into settings on my ipod and reset it, when i connected it to my laptop afterwards itsays USB unrecognized unknown device, code error 43. Its also unrecognized in itunes. All my music is still on the ipod, How can I sync it itunes??

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Also try change the DNS to Google's servers. See:
Public DNS — Google Developers

XML file for GigE Vision camera

Hello,
I am working on a design of GigE Vision camera. It should be very simple linescan camera. I implemented the whole required GigE Vision register set, can communicate with the camera in MAX. The problem is that I need to creata this XML file for the camera.There is this XML file here:
http://www.emva.org/cms/upload/Standards/GenICam_Downloads/SFNC_Reference_Version_2_0_0_Schema_1_1.x...
What should I do with it? My first version of the camera will have 2 funcions: turn it on and turn it off I am bit confused, because the xml file template has lots of functions, that I don't really need. Should I delete them? Or leave inside with default values? What does minimal configuration XML file need?
Regards,
Linus
Solved!
Go to Solution.

linru wrote:
Thank you very much! Perhaps I was too concentrated on digging through various documents and missed the important info.
And one more question: how does NI software build the *.icd file? By reading XML file? Or by reading registers in my camera?
Both. The XML is processed by the GenApi software component which then translates it to register operations. The XML file thus controls what features are visible based both on the XML file as well as the camera registers (features in the XML may be conditionally available based on the <pIsImplemented< tag). Next, the IMAQdx ICD file contains the subset of features in the XML file that are available and are tagged as <Streamable>, meaning they can be saved to a settings file.
Eric

Adobe Bridge CS4 Unknown Operating System Error

Hello,
I recently installed Adobe Bridge CS4 to my new iMac 10.7.2. I used this software on my Macbook Pro 10.7.1 without any trouble. When I open Bridge CS4 on my iMac, the following message immediately appears: "The operation could not be completed. An unknown opperating system error has occurred." When you click okay it closes and the 'Adobe Bridge CS4 Quit Unexpectedly' box pops up. I've checked for Adobe updates, but didn't find any. Has anyone experienced this problem, or have any suggestions? Thank you so much! I really appreciate any help you can offer me!

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Unable to retrieve Object.Error in File: Unknown Database Connector Error

Hi,
I have deployed two report on BO XI server. Both the reports are designed in Crystal Report designer XI.
I got all database credentilas, saved in CMC by my administrator so that these reports should not prompt me for any database login parameters when I am trying to run them from BOXI test server.
When I am running one of my report, the report is working fine. But this is not the case with other report.
This second report is working well with some inputs.
Case 1 - It is having to input date parameter(Date1 and Date2), when I am entering one input date parameter (Date1) and other (Date2) is set to NULL, it is displaying correct result. But when I am giving any date for Date2 it is throwing me an error -
"Error in File Manager_Agent_Report.rpt: Unknown Database Connector Error
Unable to retrieve Object.
Error in File Manager_Agent_Report.rpt: Unknown Database Connector Error "
Case 2 - Similiarly it is having an other input field which I am using in filetering the records in Report.
If I am setting it to NULL or If I am not giving this field, while entering the input. I am getting an output.
But incase I am giving this particular field then again it is promptig me the above mentioned error.
The report are working fine if I am executing them from crystal report designer.
Please help me to find a solution for the same.
Thanks
Deepak

Deepak, firstly are you trying to connect to one database or two in these reports? I would check the ODBC connections both in server and client machine (testing server or whatever you testing it on). Make sure both connection settings are exactly the same.
Secondly I will check the parameters values under Objects under the CMC and see if there is anything changed there.
Report back if you have checked both and it still giving errors
Regards
Jehanzeb

BOE XI R2 Error on failed instance: Unknown Database Connector Error

I have a recurring job that runs against a high availability instance of our SAP production server. This job runs every 15 minutes to make sure that the HAS reporting instanace is available to my BOE environment for reporting. This morning, one of my recurring instances failed and the associated message was "Unknown Database Connection Error." The application and system event logs on my BOE server for the period immediately prior to the instance failure did not show any issues or unusual behavior. Basis reviewed AS400 logs for the SAP instance and didn't see anything there either.
Has anyone experienced a similar error nessage for a failed instance in this sort of a scenario? The next recurring instance, and so far all subsequent runs, have been successful.

David,
We have the same problem at times; the work around we found was to retry. Our standard is retry 3 time and wait 180 seconds. I believe the problem comes from network congestion. Our jobs usually complete on the first retry.
TB

STMS error hostname 'atltu1' unknown / CPI-C error CM_PRODUCT_SPECIFIC_ERRO

Hi,
We are on SAP 4.6c and AIX unix . Our environment is a three system landscape where PRD have 4 dilaog instances
My problem is -
I cannot look at the import queue of the quality system when I logged on to the dialog instances. when I am on Central instance I can logon to the import queue of the quality system
when I double click quality system being in any of the dialog instance, this is the error I get
RFC communications error with system/dest
[email protected]_DU1
hostname 'atltu1' unknown / CPI-C error
CM_PRODUCT_SPECIFIC_ERROR.
Please help me what could be the possible reason

The you are probably using DNS as name resolve service (instead of having a hosts file).
check the content of /etc/resolv.conf on your CI, if it has an entry like
hosts: dns files
then DNS is used to resolve the name.
If server A finds B that doesn't mean B finds A. The name resolution is done on the calling system and if that is not correctly configured on B it won't find A although it works in the other direction (because the caller A can do name resolution correctly).
Markus

Unknown namespace prefix Error - when using custom Aliases with RDF aliases

I am getting unknown namespace prefix error when I use custome SEM_ALIAS with rdf SEM_ALIAS. It seems once you specify custom SEM_ALIAS, the default rdf alias is not recognized. Following are the details of queries
I have a sem_Model "test" which has "event" as a class and "Merger" as a sub-class of event, with "acquiringorg" as a property having the domain "org". "Org" is also defined as a class with the literal attribute "hasname". I have added one instance of "merger" class with appropriate values for "acquiringorg" property. There is one instance or "Org" as well for reference in the instance above.
the following query(return all objects having property "acquiringorg" and its .e. "hasName" attribute for the object) runs fine and returns appropriate resultset
select x event,z acquiringorg ,l acquireeorg from table(SEM_MATCH(
'(?x Evnt:AcquiringOrg ?y)(?k orgn:hasName ?l)',
SEM_MODELS('test'),
null,
SEM_ALIASES(SEM_ALIAS('Evnt','http://www.abc.com/Event/Merger/'),
SEM_ALIAS('orgn','http://www.abc.com/Org/')),
null));
However when I want to add another criteria i.e. show me events of type merger(?x rdf:type :Merger) , the query fails with the "unknown namespace prefix error" as above
select x event,z acquiringorg ,l acquireeorg from table(SEM_MATCH(
'(?x rdf:type :Merger)(?x Evnt:AcquiringOrg ?y)(?k orgn:hasName ?l)',
SEM_MODELS('test'),
null,
SEM_ALIASES(SEM_ALIAS('Evnt','http://www.abc.com/Event/Merger/'),
SEM_ALIAS('orgn','http://www.abc.com/Org/')),
null));
specifying "rdf" ALIAS explicitly also does not work
select x event,z acquiringorg ,l acquireeorg from table(SEM_MATCH(
'(?x rdf:type :Merger)(?x Evnt:AcquiringOrg ?y)(?k orgn:hasName ?l)',
SEM_MODELS('test'),
null,
SEM_ALIASES(_SEM_ALIAS('rdf', 'http://www.w3.org/1999/02/22-rdf-syntax-ns#'),_
SEM_ALIAS('Evnt','http://www.abc.com/Event/Merger/'),
SEM_ALIAS('orgn','http://www.abc.com/Org/')),
null));
I am unable to figure out why default namespace i.e. rdf is returning this error
Stuck at this point badly!!Any pointers would be useful!!

Full error details are as below
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.ParseException: Unknown namespace prefix ''
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 153
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 842
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 235
ORA-06512: at line 1
29532. 00000 - "Java call terminated by uncaught Java exception: %s"
*Cause: A Java exception or error was signaled and could not be
resolved by the Java code.
*Action: Modify Java code, if this behavior is not intended.

Unknown Database Connector Error Details: "Failed to retrieve SQL Error"

Hi
Getting "Failed to retrieve SQL Error" while trying to refresh the Crystal report.
Unable to create a new report also
This is my ERROR MESSAGE
"Unknown Database Connector Error Details: "Failed to retrieve SQL Error"
Previous Error: Query generated multiple SQL statements.However multiple SQL is not supported in crystal reports query panel"
Any Suggestion.

Hi,
Please note that any query that generates multiple SQL statements is not supported in the Query Panel in Crystal Reports.
I guess this Universe is generating multiple SQLs and hence the error.
I found this option while I was searching for something else: Could you try turning off the "Multiple SQL statement for each measure" in the Universe parameters and see if it works?
Also, here's the Universe Support Guide, although old, it is still applicable:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20984c2b-17f1-2b10-1091-d18977f7cd8f?QuickLink=index&overridelayout=true
-Abhilash

Crystal Reports 10 Error "Unknown Query Engine Error"

Hi guys,
after creating reports with crystal reports 2008 fails,because there's no 64-bit runtime version i try to develope my reports now with Crystal Reports 10 (ships with Visual Studio 2008).
I've minimized the complexity to a minimum - a simple console application without SharePoint or something like that. Now i'm getting the error:
"Unknown Query Engine Error"
when i try to set the DataSource for my report. Of course i created a new report file with CR10 to avoid compatibility issues. Every Users has full permissions on the file system...
I'm using the follwing Code Snippets, which are working fine for Crystal 2008 and don't threw an error while compiling in CR10.
Schema.xsd:
<?xml version="1.0" encoding="utf-8"?>
<xs:schema id="XMLSchema1"
    targetNamespace="http://tempuri.org/XMLSchema1.xsd"
    elementFormDefault="qualified"
    xmlns="http://tempuri.org/XMLSchema1.xsd"
    xmlns:mstns="http://tempuri.org/XMLSchema1.xsd"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
>
<xs:element name="News">
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Title" type="xs:string" />
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
ConsoleApplication.cs:
            MyReport report = new MyReport();
            DataSet ds = new DataSet();
            DataTable t = new DataTable("News");
            DataColumn title = new DataColumn("Title");
            title.DataType = Type.GetType("System.String");
            t.Columns.Add(title);
            ds.Tables.Add(t);
            DataRow drDataRow;
            drDataRow = t.NewRow();
            drDataRow["Title"] = "My Title";
            t.Rows.Add(drDataRow);
            * //Error is thrown here*
            report.SetDataSource(ds);
            string filename = "C:\\report.pdf";
            report.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat,
                 new System.IO.FileInfo(filename).ToString());
Does anyone have an advice: Do i miss a patch or hotfix? These problem frustrates me already, because i thought setting a datasource couldn't be such a problem...
Thanks in Advance,
Christian

Resolution:
This Version of Crystal Reports (Visual Studio 2008 .Net) doesn't want the crdb_adoplus.dll in the GAC. After i uninstall the *.dll the Console Application run without problems. For SharePoint you have to create a custom CAS which should look like this:
<CodeGroup
                              class="UnionCodeGroup"
                              version="1"
                              PermissionSetName="FullTrust"
                              Name="Crystal_Strong_Name"
                              Description="This code group grants code signed with the Crystal Reports strong name full trust. ">
                            <IMembershipCondition class="StrongNameMembershipCondition"
                                                  version="1"
                                                  PublicKeyBlob="0024000004800000940000000602000000240000525341310004000001000100f1191170c753924fe8b624c15216d8d4869e4f37d0e7941b77c05c67ba0662a7ad9099e1041739a3b1f33255c4f8c878649a558b7aaef8e08c7ce3edc2275cbda2608381813fc038db8e5792a729658c59e73121691f22197aa92c7e715d7dfdbb2730b037ccdfcd2708fbfc8c9a1a60be50c635975afce4e4b1e3e12613cfc2"
                                                  />
Well - CR drives me crazy
Edited by: C.Kaiser on Oct 14, 2010 4:36 PM

GigE VIsion Camera IP and Port setting in multicast mode (IMAQdx)

GigE VIsion Camera IP and Port setting in multicast mode (IMAQdx)
Hello, Everybody
I have NI-IMAQdx 3.5.0 , and I have Basler Camera (scA640-74gc) with GigE Vision Interface.
I run that camera in my computer as controller (Multicasting mode) with IP (239.192.0.1)
I detected that camera in another computer (to run it as listener) by LbVIEW .
my problem is
I run the Pylon Viewer from Basler (Monitor mode) after I detected that camera.
it was run successfully (I look to details of that camera it have same IP 239.192.0.1 and the port changed every time when i stop running in controller computer)
from where i can set fixed Port in multicasting mode??????
When I use Pylon Viewer in controlled computer and set the mode to multicast
I should set IP and port , then in listener computer I run Pylone Viewer (monitor mode) I saw same IP and same port which i set it in controller
I need a way in LabVIEW to set Port Number in multicasting mode...How I can do that
Best Regard
Alzhrani

Hi Alzhrani,
Unfortunately it is a bit more complicated because you would have to use the GVCP protocol and do a register read of a specific register on the camera that stores the multicast UDP port (that IMAQdx programs from the controller). However, this likely requires access to the GigE Vision specification in order to be able to format the messages correctly.
Eric

Service 'sapgw53' unknown / CPI-C error CM_PRODUCT

Hi SAP Gurus,
I am trying to create RFC destination in 46d system and while testing the connection I am getting following error message. Pl. help mein resolving the issue. I have created the RFC destination successfully from one system to this system. But gettin this error while creating RFC in this system.
"service 'sapgw53' unknown / CPI-C error CM_PRODUCT"
Following are the details
ERROR                service 'sapgw53' unknown
LOCATION             SAP-Gateway on host nlaslt12 / sapgw01
DETAIL               NiIServToAddr
COMPONENT            NI (network interface)
COUNTER              59493
MODULE               nixxi.c
LINE                 2338
RETURN CODE          -3
SUBRC                    0
RELEASE              46D
TIME                 Fri Dec 14 14:53:42 2007
VERSION              34
thanx,
Rohit

Hi Juan,
Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
Thanx and Regards,
Rohit

Oil Paint Filter "unknown graphics processor error"

When I try to use the Oil Paint filter in Photoshop, I get this error message:
"The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I have updated both my system and Photoshop. When I'm at work on a newer machine the filter works great, but I've been working from home on a macbook from 2007 and it doesn't work. I can't afford to buy an ENTIRELY NEW laptop simply to use this filter.
Below are my mac and graphic card specs - is there anything I can do?
Model Name:
MacBook
Model Identifier:
MacBook4,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.1 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
800 MHz
Boot ROM Version:
MB41.00C1.B00
SMC Version (system):
1.31f1
Serial Number (system):
W8835A9X0P0
Hardware UUID:
278DEAE8-4839-53CC-9DCB-ED08A646BF70
Sudden Motion Sensor:
State:
Enabled
Intel GMA X3100:
Chipset Model:    GMA X3100
Type:    GPU
Bus:    Built-In
VRAM (Total):    144 MB
Vendor:    Intel (0x8086)
Device ID:    0x2a02
Revision ID:    0x0003
Displays:
Color LCD:
Resolution:    1280 x 800
Pixel Depth:    32-Bit Color (ARGB8888)
Main Display:    Yes
Mirror:    Off
Online:    Yes
Built-In:    Yes
Display Connector:
Status:    No Display Connected

Photoshop CS6's GPU requirements are here along with discussion of the Oil Paint filter.
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
When you go to Preferences > Performance and look at the GPU settings, what is the mode? Basic, Normal, or Advanced?
Perhaps you can try ratcheting down the settings,but I somehow sense your video card is not supported and your vram is below the 256MB minimum.
Gene

Unknown Query Engine Error when doing a Verify Database

Hi there,
Using Crystal 10. Sybase Server.
Have built a report that connects to a stored procedure. The stored procedure has since been updated, and new fields have been added.
Usual process for me is to simply:
1. Go to Database > Verify Database
2. Enter login credentials for server
3. Enter parameter values (as per stored proc)
4. Report is then updated and new fields display
Currently, I am able to complete step 3. As soon as I hit ok, i get an 'Unknown Query Engine Error' - to which I can only hit OK. Doing so results in no changes - and the new fields of course do not display.
Any clues on what might be going wrong? I am guessing that it is something to do with the stored proc itself - but perhaps it is some sort of permissions issue?
Grateful for any assistance you can provide. Please let me know if you need any more info from me.
Many thanks,
Corinne

Likely due to some field type defined incorrectly or not supported. Try creating a new report off the new update connection info. If that fails also then it's the data source causing the problem.

-1074360278 Unknown GIGE Vision error

Similar Messages

Maybe you are looking for