108 wireless adapter recommendations?

I want to get a wireless adapter for my new system. I bought a WG311T off a guy on eBay but it seems broken. However, while trying to fix it I discovered that it just does not play well with XP at all, although the Linux support seems quite good. Nice reversal of the usual.
Before I replace my WG311T with a brand new one does anyone have any recommendations? It can be a PCI or UCB device but I think I would prefer PCI. Oh, and it needs to work as well in XP it does in Linux :-)

Hmh, always a hassle. Currently, i'm using a 108 adapter using the madwifi driver. Too bad, in linux there are just 54 mbit available. Works well on linux / 2k / xp.
01:07.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
The adapter is a d-link dwl-650.
WG311T seems to work. Should work well with linux / windows, maybe just the device is somehow broken?
// STi

Similar Messages

Recommended Wireless Adapter?

I have a Mac mini with no built in airport card and just recently bought a Belkin USB Wireless Adapter. After searching all over the web, I finally found the right drivers for my computer to be able to recognize the adapter. Unfortunately, when I open Safari and try to connect to the internet, it is not recognized, and it appears that it never will be. After reading a lot online, the choice to purchase this seems like a bad one since the product seems really unreliable.
What would be the best product that you guys would recommend in order to connect to the internet wirelessly? Or, if you can help me get the internet working with what I have already, even better. I don't want to have to open up my computer or take it anywhere, and would prefer using a USB device, if possible.
Thanks.

I also want the security beyond WEP that is available with the latest usb wireless g adapters. D-Link and Belkin among others used the Ralink chipset, for which there is a driver, but, there are also "version 4" Belkin adapters that use the Zydas1211 chipset that OSX can use with a different driver, and also Dlink DWL-G122 usb adapters that use a Prism chipset.
There are many wireless USB adapters for which Mac OSX drivers exist but are hard to find. Has Apple purposely asked manufacturers not to release these drivers? These should be pretty simple for companies to create when the have linux drivers already. Apple should be helping users get the correct drivers, when they are not provided.

HP p6674y wireless adapter problems

hello. i'm trying to get my pc's wireless capabilities running but am having issues. i have tried a few things and am hoping you can direct me further. i can buy a wireless usb adapter but the pc comes with one so i am trying to use it first.
the physical card is a ralink rt 3090. on hp's driver download it suggested a different driver than the one linked to this particular card. the hp suggestion would not install and i found that i already had the driver installed that was recommended (netr28x.sys). when i look under 'device manager' in 'network adapters' only the 'realtek PCIe FE Family Controller' is there, not a wireless option. how can i make this happen? i have looked inside the computer and verified the actual existence of the card and have an antennae attached. any help or suggestions would be greatly appreciated. thank you.
kevin

Hi kca77,
Have you disabled the wireless adapter? It should appear in Device Manager within Network Adapters.
Do you have any Device Manager errors?
Try reseating the WIFI card on the mainboard.
Open Network and Sharing in Control Panel, open change adapter settings. Is the WIFI adapter listed?
You either: have a driver configuration issue or a hardware problem
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
12 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Conexant audio update broke wireless adapter driver

Installed the recommended driver update for conexant audio (windows 7). Immediately upon restart the wireless network adapter card stopped functioning. No other updates or changes were made, and this was a direct result of this driver breaking the other driver. Could not get the wireless adapter driver to fix, had to do a system restore because even uninstalling the conexant driver did not fix the wireless driver.
Bad update!

Hi, Please try driver from the following link (the first one): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6732463&swLangOid=8&swEnvOid=4063 Regards.

Airport extreme connecting with xbox 360 wireless adapter problems...help!!

Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

Just boot camped mid-2012 MBP using Apple's BootCamp 5.1.5621. However, no wireless adapter is listed in device manager

[In Windows 8.1] When I access the Device Manager, it does not list my wireless adapter as one of the devices available. I have attempted to manually install the drivers from the BootCamp 5.1.5621 file.
I've spent several hours attempting to remedy this but have only found threads explaining how to solve the problem if the 802 adapter is already listed in the device manager.

I recently had some BT issue's in Win8 so I wrote a topic about this subject. Maybe you need to replace the Broadcom drivers as well.
Please have a look here:
Apple Wireless Keyboard Windows 8 problem
Good luck.
Marcel

2g Shuffle crashes wireless adapter

Hello,
I'm a dell machine with windows xp and whenever I plug in my new 2g shuffle I get an error message saying windows does not recognize my device and then it crashes my wireless internet connection. I am using a Linksys wireless adapter on my home machine. I moved my machine and hard wired and the shuffle worked like what you expect from all Apple products! I moved it back and reconnected to wireless plugged in the shuffle, same error message, wireless does not work and shuffle is not recognized by windows or itunes.
Any ideas?
Dell Windows XP
Dell Windows XP 1g shuffle, 2g shuffle, 1g mini, 2 5g 60 gig video

After looking at another post I decided to try a powered usb hub, the shuffle works fine, no problems at all with any other devices using the usb ports. The shuffle works like it should, I just don't understand why that makes a difference, do I have a defective shuffle, is it using too much power from the usb port, should I exchange it?
Windows XP

WUSB54G - Wireless Adapter Causing BSOD

Here is one for the support team. I wanted to connect another PC iwas working on to the internet via my WUSB54G wireless adapter. This was a fresh install, but an old computer. At the point in the installation where the adapter is connected to the USB port, Windows keeps shutting down and giving me a blue screen. Any advice?

Did you try to install the adapter drivers and not the software ? If not you should try that...
Make sure you connect the adapter to a different USB Port(don't use the port to which it's already connected)...
Download the adapter drivers from here: http://home.cisco.com/en-us/wireless?referrer=www.linksysbycisco.com
Once you have downloaded the drivers you need to unzip the file...After you unzip the file you should un-install the adapter drivers/software from Programs menu...Connect the adapter to a different USB Port and reboot your computer...Once the computer is rebooted you should see a message "Found new Hardware"...Select the option Install it from a specific location and click Next, then select Include this location in Search and browse to the place where you have unzipped all the files and select the Driver folder and click O.k...Then click Next and it should install the adapter drivers...
NOTE : This installation doesn't install the software(Linksys Monitor)...
Once the Adapter is installed, Click on the Start button >>> Control Panel >>> Network Connections- Right click on the "Wireless Network Connection" icon and select "View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click "Connect". See if this corrects your problem...

Wireless adapter causing blue screen

Hello,About a month ago on my Lenovo Ideapad Z580, I was using the internet when it said I was no longer connected. When I tried troubleshooting, it reset the wireless connection adapter and gave me a blue screen. When it restarted and I tried troubleshootingt it again, it enabled the adapter and worked fine. Since that first time, this BSOD has happened every day, sometimes multiple times a day, but not everytime I am on the internet. I have tried doing a system restore at a few different points, but the restore always ends in an error. I checked at the driver for the wireless adapter is up to date. Please advise on what I can do to fix this problem. Thank you,Stephanie

The symptoms you describe could be symptomatic of a variety of things to include hardware/software issues, overheating caused by a failed processor fan, bad memory (RAM), failing or underpowered power supply, CPU overheating, motherboard, video card, faulty or unsigned device drivers, CMOS battery going bad, BIOS and firmware problems, dirty hardware components, programs hanging or unresponsive in the background, and even malware. If the computer is overheating, it usually begins to shutdown/restart on a more regular basis.
If the machine is only crashing at home after establishing a connection but not at work when establishing a connection, then its probably an issue with your network configuration or something (i.e. wireless adapter) causing a conflict and not a malware issue.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL error is usually due to a bad driver or faulty/incompatible hardware or software. This error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel Interrupt ReQuest Level (IRQL) that was too high.

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

Hello everybody,
Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points.
I found two work arounds but I don't know how to fix the issue completely.
1. Remove usb adapter and plug it in again (it causes arc4 module to load), then restart networking.
2. rmmod p54usb, rmmod p54common, modprobe arc4, modprobe p54usb and after that restart networking.
Could anybody help to fix the problem generally?
$ lsusb
0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
$ uname -a
Linux arch 3.1.9-2-ARCH #1 SMP PREEMPT Sat Jan 14 08:11:41 UTC 2012 i686 Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz GenuineIntel GNU/Linux
Stas

Does the p54common get loaded again as well when you do modprobep54usb?
If not, you might just put that into modprobe.conf blacklist.
If it does get loaded as well, there might be another wireless module getting loaded that perhaps does cause problems. You can check that with
mkinitcpio -v
now, or with lsmod after a reboot before your workaround.

Can I use a USB wireless adapter with my iMac G4 Flat Panel (it has no Airport card).

I have just salvaged an iMac G4 15-inch Flat Panel from the skip and now have it running Mac OS X Tiger 10,4. It has a 700mhz cpu, 80Gb hard drive and 512mb of Ram. No airport card is fitted so I was wondering if a USB wireless adapter could be used instead. I have a Belkin F5D8055ea USB wireless adapter fitted and the system recognises the device, this is as far as I have got as I am a complete novice on Apple/Mac machines. Anyone any ideas please?

If the device is recognised, see if you can located your wi-fi network using Airport Utility.

Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

i have a time warner modem with the ethernet cable plugged into my airport express to create a wireless network in my house. my macbook and dell connect with no prob.
the xb recognizes the airport express, shows it as connected with green bars, but when i try to log into xbox online, it says that there is no connection.
i can plug in the ethernet cable from the xb to the airport ex and there is no problem. only when trying to use the wireless adapter.
how can i stop this? also, how can i find my IP address?
since the xb wouldnt connect and find my ip automatically, i tried to do it manually. when i go to terminal on my macbook and enter "ipconfig e0", i dont see an IP address.
i have seen a lot of info on this but it mainly deals with airport extreme or those who are trying to connect to airport express with an ethernet cable.
so if you can help me troubleshoot the wireless connection between my xb and my airport ex OR explain how i can find my IP address, i would be very grateful.
FYI---the airport express was purchased in april, so i believe it is the new "n" model.
thanks for all your help.

Gary Sanborn, please share your tricks. I'm curious to know how you got it to work. I used to have the old Express and that worked just fine. The new version (n) doesn't seem to connect to xbox live. As previously stated, mine also shows "connected" and a strong green bar signal on the xbox but the text can't get passed "connected to live"... if I'm not mistaken.
I heard about holding down the option button white selected the type of wireless connection and connecting to wireless b only. I would want to avoid this option. I don't want my express to run that slow. Please advice. Thanks in advance.
By the way, I haven't tried it since recently upgrading to OS X 10.5.3. I wasn't sure if that affected airport's connectivity with xbox 360.
Message was edited by: Gino Zevallos

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Having Trouble Connecting To Xbox Live using my router and wireless adapter.

Okay, so this is kinda long but I'll try and speed through. Recently I moved from my old place to a newer place (larger) and before, my old spot worked perfectly, no troubles. Now, eversince i got my internet cable service re-hooked up I've had problems. My internet is fine, that's not the problem. It's my xbox live for my 360. My cable guy pretty much set up my living room with the main router and not my studio office which I keep my 360 in. Instead he told me it would be much easier to just go out and buy a wireless adapter for my PC to recieve the signal from my living room off the main family computer. Well, went out and bought a $80.00 wireless adapter top of the line and it works perfectly, I get the internet really fast. Problem is, my 360 will not connect now. It always says DNS failed. Well here's the problem. I have a Linksys router in my studio office that sits on top of my PC that i have connected to the ethernet of my PC, then in the 2nd or 1st port i have my 360ethernet wire connected to my xbox360. Still it says DNS failed. Shouldn't my router be getting the signal from my Wireless adapter that it's receiving from the living room? It's connected through the same computer yet it doesnt connect. It finds my I address, and it finds the network adapter yet it always fails my DNS. I've tried evern switching the xbox360 ethernet to the main ethernet port on my pc and that just makes me fail the IP address test. I need help guys. My wireless adapter for the pc is a Belkin but my router is a linksys and not sure if the 360 just doesnt recognize it or not. Is there settings I'm missing or something? Please help!!!
The Burninator...

On your 360 if u getting an error msg DNS failed,you can login to your router setup page and go to status tab, not the Static DNS1 and DNS2 numbers and u can give a static dns to your 360. its will resolve ur issue.

108 wireless adapter recommendations?

Similar Messages

Maybe you are looking for