1080i video looks good on iMac but not on small movie screen

I have a 1080i video that I exported as a default 1440 x 1080 @ 59.94 fps. If I play the video on my iMac, which is 1920x1080, it looks good, but when I play it on a smaller movie screen you can really see the interlacing. I tried highlighting all my film on the primary timeline, going to Info --> Settings View from the dropdown box at the bottom, and then setting:
Roles: Video & Dialogue
Timecode Display: Drop Frame
Alpha Handling: None/Ignore Alpha
Field Dominance Override: Lower First
When I export and play that it looks pretty much the same, if not worse. I'm thinking that Drop Frame probably isn't good, but it still has the interlaced look.
Does anyone have any suggestions?

How'd you do that?
I just imported it from the camera. Again, I messed up earlier as it originally imported at 29.97.
How'd you do that? What format is your media exactly? Codec and complete specs.
Codecs: H.264, Linear PCM
Frame Size: 1440 × 1080
Video Frame Rate: 29.97
Video Field Dominance: Upper
Well, that's interesting. I didn't realize it told me what the Field Dominance is. Now I know not to use Lower.
Why should I not change the Field Dominance? Also, I was reading another post where a guy tried copying his videos from one project, 1080i, to another project, 1080p, and he was not successful. Have you tried this or heard of anyone being successful doing this? Thanks.

Similar Messages

Text looks good in ProRes422 but not Animation codec

I am doing a lower third in Motion and exporting the mov file to use in FCP.
The FCP timeline is in ProRes422.
If I export the text in Animation codec it looks jaggy and not good quality.
If I export the same thing in ProRes422 it looks good in FCP.
But, I can't get the transparency in the background with 422 , thats the problem.
How can I get around this?
In the past, with text, from Motn to FCP, I have had two video tracks with the same graphic and the top one was set to Travel Matte - Luma, and this gave me transparency, but my lower 3rd has a moving graphic element.
Can I export in Motion with 422 and somehow get a transparent background?
Thanks,,

If your sequence will not render to your satisfaction in the host codec and because text cannot possibly get any better than that, you're either looking at it improperly, have something set incorrectly (render settings in FCP? Commonly missed problem), or your expectations are unreasonably high. But I'm not watching over your shoulder, no clue what you're doing or why you're doing it that way. But I know that Motion's text and pixel output is beautiful so I've got no problem insisting you have an easily corrected user error, you just need to figure out which one it might be.
Might try Mark Spencer's articles:
http://provideocoalition.com/index.php/smartin/story/renderingmotion_projects_in_final_cutpro/
http://www.applemotion.net/page20/page20.html
Why do you think a "mask" would improve the rendering?

Video looks good in PR but bad when exported

Hello. I hope someone can help me out here. I am doing color corrections in Premiere Pro and it looks good but when I export it, the colors are not as saturated (it needs more color). Do any of you know the reasons why and how I can fix this?
I read that my laptop might need to be calibrated is that true? Is there another way? How do I calibrate it?!!
Please help me. Thanks in advance.

like television and also the theater screen, but I know the theater screen is calibrated so I guess my video needs to be calibrated?
i think thats what the others are getting at.
if on your computer, premiere and vlc and quicktime all look the same there is no problem with premiere.
if your video on your computer looks different than another screen or tv, then its calibration.
you can adjust the saturation on your computer until it looks as dull as the calibrated theater screen, then you should have closer matching displays. in windows you may find a control for you video card, in mac im not sure. then you can adjust saturation in premiere to your clips/timeline.
if you dont want to change your saturation for your laptop, you could use an adjustment layer above the footage and reduce saturation to match the calibrated theater screen. then go back and boost the saturation on clips or previous adjustment layer... once happy with saturation that way, disable the adjustment layer with the reduced saturation for export.

Help with Importing psd's, looks good in viewer, but not in canvas...

I have been searching for threads related to this issue, and this is what i've come up with...
It is my sequence settings, the picture looks great in the viewer but not in the canvas, as soon as i put it in the timeline, it goes blurry almost. I tried changing my settings to HD 16:9 and the picture looks great, but I need standard (NTSC DV 4:3), does anyone know a way around this? I can do it in Avid fine, why am I having such a hard time in FCP?
Thanks
P.S i have tried changing my image size in photoshop to 720x480 and 720x540 and it doesn't seem to make a difference.
Jana

The canvas is a low resolution proxy.
What does your sequence looking like on your NTSC production monitor?

Exported Movie looks good in Quicktime, but not in any other Player?

I Have noticed that the text that I have exported from After Effects were looking jagged in windows media and Kmplayer. At first I thought it was my render settings that were making it look low quality, but then I found that when played in Quicktime the movie look high rez. only problem is that quick time is extremely laggy when I open up my movies. Why is this happening?

Huh? That's simply hardware scaling. Your movie is not being viewed at 100% size.
Mylenium

20" iMac but things appear small on screen

I'm using a 20" Intel iMac and my display resolution is set at 1680 x 1050.
If i reduce the screen resolution things do get bigger, but the text appears blurry.
Is there another way of making things bigger? I know Safari allows this in the View menu, but how do i do this for other applications such as Garage band and Logic, etc?

The easiest way to zoom temporarily is to select "zoom using scroll ball" with a key of your choice (I use Ctrl). This allows you to quickly zoom in on what you are trying to read. It works in all programs and for graphics as well as text. I do wish, however, that Apple would allow more control over text size in menus, etc. except by using lower screen resolution. I certainly get tired of zooming with the mouse all the time.

Video looks good, text does not

My video looks good, but the titles, Ariel bold - 78 pt bold and 68 pt regular, white text on top of black bar set at 50% opacity look lousy. The text is not crisp and angular as it should be. It looks great on my monitor and when rendered to flv, but when rendered mpeg-2 to dvd with the highest specs as instructed, it looks lousy. In fact, it looks the same as when I rendered it with the default settings to dvd. Any suggestions?
I just found this on the web, is this the best solution?
"Never use premiere for effects, titles, ect. Use After Effects then render it to a uncompressed animation clip - alpha settings selected. reimport to premier lay it down and gaze at beauty. Compression is bad, premier compresses everything it renders, the more you compress-layers, the more degredation and pixelation"
I posted the Creative Cow message on the After Effects forum and was told to ignore it. I have rendered in so many different ways and configurations to mpeg-2 and my titles that are 68 px and 78 px still look almost rounded instead of angular and crisp. Help....
Thanks so much,
Lisa

Well first off i will start with mpeg2 dvd is ancient and horrible technology and always looks bad to me... that being said what are your specific specs. If you have an hour or video or less then you should be encoding as 9mbit CBR and that is as good as your going to get.
for all we know you could be trying to put 3 hours of video on a single layer dvd and using 3mbit data rate which will look very bad.
there could be several issues, are your fields correct? reversed fields can make graphics look pixelated. what are you viewing your dvd on that makes it look so bad? i have noticed many hdtv lcd flat panels when given a SD DVD video look horrible.
export a single still image of your text and view it in photoshop, then render out a mpeg2 version of your video and import it back into premiere and export a single frame of it also. then load them into photoshop and compare, you can composite them side by side and post a pic for us to see what you are describing and try to troubleshoot it for you.

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming
New to the iMac and apple

Welcome to the Apple Support Communities
If you aren't going to use your Mac for anything special (Final Cut, Aperture, Photoshop, games...), you don't need that graphic card and you will save money.
Also, as it looks like you are going to buy the 27-inch iMac, I recommend you to buy the Mac with 8 GB of memory, and then, buy the memory that your iMac needs in OWC or Crucial (the iMac supports 32 GB of RAM) > http://eshop.macsales.com/shop/memory/iMac/2012_27/DDR3L
Doing this, you will save a lot of money. Also, it won't void the warranty of the Mac. If you need help installing the RAM, see > http://support.apple.com/kb/ht5540

Video iChat on my iMac is not working

Video iChat on my iMac is not working. The i chat buddies screen is up all right. I can see my buddies' pictures on the screen. But I can't start the video iChat. It worked fine for a few years...suddendly it does not work???

HI,
In the Buddy list you can see the Video Chat green icon for your Buddy.
Their Buddy pic is also on view.
Clicking the Green Icon (Or highlighting and using the Video Menu > Invite to Video chat) does what exactly ?
Do you get to see your Preview ?
Does it say Connecting ?
Do you get any Error message or pop up ?
Have you changed your router ?
Have you allowed iChat through it ?
10:07 PM Friday; April 26, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Any ideas why the video camera on my imac is not working?

Does any one have any idea why the video camera on my imac is not working? I have been using skype on my imac for some time and recently I have discovered that it wont work, could this have anything to do with the mountain lion upgrade?

Have a look here: http://support.apple.com/kb/HT2090?viewlocale=en_US
I think I'd start with the SMC reset.

I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?

I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?
I'm aware that all printers are not airprint enabled but since i can print form my imac that should not be a problem right?

Hey Fredrik68,
I would double check and see if you meet all the requirements for AirPrint here, including the printer model:
AirPrint Basics
http://support.apple.com/kb/HT4356
Have a good one,
Delgadoh

Video looks good, until I export it to vimeo?

how are you guys doing? im new to the cummunity. I have a problem with FCPX/Compressor 4. It seems when my video is in fcpx it looks good, i export via Compressor 4 & it still looks good. Now heres the problem. When you look at my video through a computer on Vimeo it looks ok, but soon as you veiw it via cell phone it looks terrible! (& we all know most people veiw media through cell phone devices) so my question to you guys is... is that just a cell phone thing? or are there settings in which i can change to make the video look good always reguardless if its on a computer or cell phone?
http://vimeo.com/67703617 there is the video, but on a cell phone just doesn't look as right.
it would be greatly appriciated if someone out there can answer my question..thank you!

Terrible? No way.
I have a 4S and I thought it played smoothly and displayed quite well – no artifacts that I noticed and very nice color as well.
Don't know what else to tell you.
Anyhow, the deal with Vimeo, et al is that once you upload it, it is in their hands. So you want to give them a version that isn't excessively compressed (and of course, progressive). And they will encode it for desktop and mobile devices.
Good luck.
Russ

What am I doing wrong here? Vids look correct in FCP but not in Quicktime..

Hi,
I have a few quicktime movies that I made a long time ago. I have dragged them to my hard drive and they look great and play exactly how I edited them in Final Cut Pro. However, when I open them in Quicktime or try to play them into any other format (Flash) they appear wider.
Now I am confused as it appears every movie I have ever saved seems to be distorted when I play it in Quicktime.
Are there some settings within FCP or Quicktime that I am not aware of?
Are both programs accurately playing what is recorded?

I am having this exact same issue. My sequence is 352x288 the video looks great in FCP but every time I Export this sequence straight out through QuickTime (not QT Conversion or Compressor) self-contained and using the current settings it plays back in QuickTime as 720x480 (640x480) millions in DV format. I even tried to force the export to a customized setting with the 352x288 frame size and it still plays back at 720x480 making the video look fuzzy and stretched. We've already spent a few hours testing other options with no success.
Oh and what's odd is if I open the same exported file in FCP's Viewer the size is correct and when I view the exported file's info (Apple+I) it says Dimensions: 352x288. Codec is DV/DVCPRO - NTSC. One thing I just thought of while typing this is would changing the codec make a difference since the original footage is 720p from an HVX200 camera? If I should change it what should I change it too?
The viewers will be watching this in QT Player. I'm using FCP7 and QT7 also tested with QTX with the same results.
Any idea is better than none, thanks!
Lance

Help..Flash Videos work for Chrome/IE but NOT Firefox

So I cannot see some flash videos on Firefox (like sites CNet & Disney do not work) which use flash. It does work on Chrome & IE.
1. ALL Programs are the newest/latest versions.
2. I removed and downloaded all programs- restarted the computer after each download.
3. I have the latest Flash (according to the website) when I view the Adobe Flash Website on Firefox.
I don't know why some flash videos work...and some do not.
I am running Vista. All my programs are legit...and I do have McAfee running..I don't download porn, no viruses etc.. Anyone have advice?!!

ok ok
I disabled firewall which - for some weird reason- allow it to play in Firefox. Videos played in IE & Chrome- but not in Firefox, until I disabled Firewall..weird.

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

1080i video looks good on iMac but not on small movie screen

Similar Messages

Maybe you are looking for