1080i60 video captured file has 3-13 sec. time diffrence, audio and video

capture from camera (mode HD 1080i60) to imac G5 1.8Ghz ( allocated disk space is 500G) for 4 hours audio and video has no longer syncronized, time differences are about 3 to maximum 13 second. this can be checked by quicktime, after captured.
disk has no error
this case is also proven apple japan technical center.
our case only FCP runs, no other application started.
FCP 5.1.4 os 10.4.11
if parson in charge in apple usa, please contact to apple japan for more details.
FCP might have serious problem on capture routine

Thank you for your kind reply, appreciated.
i operate two imac capture system same day for operation. specification for both system are identical.
from your advice, i checked .mov files by QT, which captured that day.
condition:
both system's FCP capture operation are closed 4 times by escape key for creating files, after created file. i again start for capturing the data. and no other application are initiated, except FCP
system A has time differences audio and video, but not always there are time it is good.
.mov files
format FPS sound
file 1 apple HDV 1080i,1440x1080 29.95 16bit mono 48.000khz
file 2 apple HDV 1080i,1440x1080 29.94 16bit mono 48.000khz
file 3 apple HDV 1080i,1440x1080 29.95 16bit mono 48.000khz
file 4 apple HDV 1080i,1440x1080 29.96 16bit mono 48.000khz
system B has no difference.
format FPS sound
file 1 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
file 2 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
file 3 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
file 4 apple HDV 1080i,1440x1080 29.97 16bit mono 48.000khz
NOTE: Both system never end FCP for this operation. created files by escape key.
connection from camera to imac are directly connected to imac's fire wire socket by fire wire cables

Similar Messages

Hi there, i've just finish our schools year book (voluntarily) and it has 155 pages incl. front/backcover. This file has 1800 links a lot of photos and a few reports. everytime i go to save as PDF it freezers on page 66. i need the book printed in hi-res?

hi there, i've just finish our schools year book (voluntarily) and it has 155 pages incl. front/backcover. This file has 1800 links a lot of photos and a few reports. everytime i go to save as PDF it freezers on page 66. i need the book printed in hi-res? im running out of "printing time" as we need it back to school by 10th december for 12th December distribution.
what do i do? if i save it in low res pdf everything will be a blur...can someone please come to my rescue. i have a
OS X version 10.8.2,
Processor: 3.06 GHz Intel Core 13,
Memory 4 GB 1333 MHz RAM
Startup Disk is Moutain Lion
my file is about 24 GB I Purchased a 32 GB USBA stik to save and send to printers.
PDF made easy assistance please anyone out there....?

I do not have InDesign so I can't help you there.
Here is an article from Adobe:
http://helpx.adobe.com/indesign/using/exporting-publishing-pdf.html
Export an open document to PDF for printing
Choose File > Export.
Specify a name and location for the file.
For Save As Type (Windows) or Format (Mac OS), choose Adobe PDF (Print), and then click Save.
When you select the Adobe PDF (Print) option, you cannot include interactive elements in the PDF. To export an interactive document to PDF, see Create interactive documents for PDF.
Do one of the following:
To use a predefined set of job options, choose a preset from the Adobe PDF Preset menu.To create a PDF/X file, either choose a PDF/X preset from the Adobe PDF Preset menu, or choose a predefined PDF/X format from the Standard menu.To customize options, select a category from the list on the left and then set the options.
For Compatibility, choose the lowest PDF version necessary to open the files you create.
Click Export (Windows) or Save (Mac OS).
To reset options to the default, in the Export Adobe PDF dialog box, hold down Alt (Windows) or Option (Mac OS) and click Reset. (The Cancel button changes to Reset.)

Why can't Adobe Premiere Pro CC 2014 Time remap Audio and Video together?

In case you didn't notice, my question is WHY. I don't know why Premiere Pro can't do this. From what I understand at the moment, the only way to time-remap audio in any way shape or form using Adobe software is through Adobe After Effects, which my computer has absolutely no chance of running ever. I know how to do regular stretching of audio in both Audition and Premiere Pro, but apparently I can't time-remap audio using either of these programs.
So why can't Adobe Premiere Pro time remap audio along with the video? What's the reason that it can't? It's a massive disappointment and would be very impressive to see accomplished in the future. If it's possible to time remap audio and video together in After Effects, that's great and all, except for the fact that I can't use that program. Why can't it be done in Premiere Pro and will it ever be possible in Premiere Pro?
Also, will time remapping audio become possible in Audition someday?

That sounds like a great idea. File a Feature Request:
Adobe - Feature Request/Bug Report Form

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

I cannot view the family sharing invitation. My wife has sent it multiple times Via email and text yet I haven't had a notification, but when I attempt to send to her she receives the notification. Help please?

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

Check if a certain file has been updated in last X days and error if is hasn't

I need to test if a file has been updated within the last few days (it's updated monthly) and proceed if so, but error if it hasn't been updated.
I used the following to check if the file has been updated:
Get-Item c:\temp\junk.txt | Where{$_.LastWriteTime -gt (Get-Date).AddDays(-7)}
It returns the file:
But I couldn't get that to work in a If/Else statement, so I tried Test-Path:
$path = "c:\temp\junk.txt"
If(Test-Path -path $path | Where{$_.LastWriteTime -gt (Get-Date).AddDays(-7)})
"File exists"
Else
{“No file” }
Although this always returns "No File".
Any idea what I'm doing wrong??
-Al H

Hi,
Here's how I'd do something like that:
If ((Get-Item c:\temp\junk.txt).LastWriteTime -gt (Get-Date).AddDays(-7)) {
Write-Output 'Less than 7'
Else {
Write-Output 'Too old'
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Export Waveform Chart Plots data to spreadsheet file based on X scale (Time Stamp) min and Max Value

Hi All,
Query 1:I am trying to export the Chart data(Total plots 6 ) only between the X scale Min Time and Max time limit .
But couldnt able to achieve that progammtically.
is their anyway to achieve this.
Query 2:Also ,In chart their is an right click option to export data to excel,but when using this option the data get exported in its own temporary name(iv*****.tmp),i dont want this to happen.Instead the data expored using that option should be written in a file specified by me(everyting should happen in backend)
pls suggest the best solution for above 2 queries.
Thanks,
Selvan.

Hi selvan,
1) read the chart history (or better keep a history in your own shift register) and limit the data to the XMin and XMax values (read all those chart settings from its properties). Then save the data using WriteToSpreadsheetFile…
2) The right-click option is as it is. When you need different behaviour you need to program your own routine. Once you finished query 1 it will be no problem anymore to also solve query 2…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

File has turned to question mark and info now lost

i created a file and put it in my dock to hold all of my go pro videos before conversion. the file has now turned to a question mark and won't open and i cannot find it in finder. i have tried plugging the go pro back in to see if it would work then but it won't. please help!!! this folder has all of my wedding videos in it!!!

I have followed the instructions you performed:-
Created a new folder on the desktop.
Dragged it to the right hand side of the Dock. In the area that has the Trash and Downloads area, it will not go into the Applications area i.e. Mail, Safari etc, I did not expect it would.
The important thing to note is that the New folder remained on the Desktop.
I then dragged files into the folder in the dock, all OK so far, but note they were also in the same folder on the Desktop, i.e the Dock Icon was just an alias of the folder on the Desktop.
I then trashed the folder on the Desktop and I was able to still access the files and add new ones even though the folder was in the Trash, i.e. the alias followed where I put the original file.
I then emptied the Trash and tried to access the folder in the Dock, I got the Question mark.
So did you trash the folder you had created on the desktop and then subsiquently emptied the Trash?
If so that would follow exacty the test I did.
If this is what as occurred you may be able to find some file recovery software that will get some/all of your photos back, I have no suggestions on what software to buy.
If this is not what you did, I a sorry but I am out of ideas.
Hope you get them back.

Is it possible to play audio and video files(urls) directly in webView ?

Hello Everybody,
I have implemented one article page in webView. The content of the that page is html file. There are some links for audio and video files. Is it possible to play that links directly in that webView by clicking them?
Or is there any other way to play this files?
Any kind of information on this topic is highly appreciated.
Thanks,
Pandit Pakhurde

Is it important that the music come from a video, or are you just looking to listen to music in the background, while doing something else. If the later, you can certainly play music from the Music App, Pandora, or iHeart Radio, etc., and with the music playing, tap your home button to go to your home page and open anything else you want and the music will continue.
I don't have any videos to try out right now, but you try the same thing out and if the music continues, it works. If it doesn't, it doesn't.

Cannot launch vivado simulator 2015.1: behav/compile.bat' script "Please check that the file has the correct 'read/write/execute' permissions"

Hi,
I'm trying to run a verilog simulation using the vivado simulator 2015.1 on Windows 7.
I get the following error when I attempt to launch simulation:
ERROR: [USF-XSim-62] 'compile' step failed with error(s) while executing 'D:/projects/axi/axi_test_system/axi_test_system.sim/sim_1/behav/compile.bat' script. Please check that the file has the correct 'read/write/execute' permissions and the Tcl console output for any other possible errors or warnings.
The tcl console repeats the same message, "Please check that the file has the correct 'read/write/execute' permissions"
I cannot find any problem with the permissions. I believe that windows will always execute a .bat file.   Within the same project, I can run elaboration, synthesis and implementation without problems.
Any idea why the simulation compile script won't run?
Thanks,
Ed

Hi,
Thanks very much for your detailed reply. These were the right questions based upon what I told you.
However, I took the code home last night and ran it on my webpack 2014.2 release.   It still failed, but I got completely different error messages.   These messages correctly pointed me to an undeclared signal in my testbench. Once fixed, the compile worked and the simulator launched.
This morning, I fixed the signal name in my 2015.1 setup, and it also compiled and launched correctly.
So, the problem wasn't actually related to file permissions. It seems like the 2015.1 error message may be broken compared to 2014.2.
I was running the Vivado GUI, clicking on "Simulate > Run Behavioral Simulation"
Thanks again for your help.
Regards,
Ed

Strange export result in FCP 7- audio and video output not in sync anymore

I have a problem exporting edited videomaterial. After export audio and video they are not in sync anymore. There's a difference of 8 sec when exporting audio and video separatly. Movie is total 61 min long.
Video and sequence settings are HDV1080i50, 25fps, 48khz, 16 bit, mono.
What could that be ?

Well now that I look at all the clips in FCP more closely I see some clips from the same tape are in sync and others are out of sync. And one section of tape which I captured twice was in sync on one clip and out of sync on the other. So it can't be the tapes.
Maybe the sync problem is caused by not coordinating the tape playing and FCP capturing properly every time! So I will try re-capturing the problem sections of tape.

New Project will not save, re-open with accurate or matching audio and video.

I filmed footage last week. Uploaded it into Premiere Elements and edited the footage in Elements, and saved my work as a project. I opened Elements this morning, and upon opening my saved project I was prompted by the program to locate the file. When I then selected the raw footage files, it loaded the project, but with audio and video out of order, not synced, etc.
How do I save my work as a stand-alone project file with the audio and video synced as I intended, in a format that I can load, share, re-open and work on without having to re-locate the raw video?
This seems to be a basic function of Video Editing software, so I hope it is something small I can adjust and move on from. Oh Also all the files, both project (.prel) and raw footage (.mov) are saved on the desktop of the computer i am using to run Premiere Elements.

brjames1
What version of Premiere Elements are you using and on what computer operating system is it running?
After you have created a project and it has been saved, you should be expected to be able to reopen the project with the
project as before the save/close (some discussion about rendered files remaining rendered, but essentially as written).
When they do not, we can invoke the damaged project syndrome.
The following is an Adobe document on that subject.
Troubleshoot a damaged project file | Adobe Premiere Elements
If you are getting "Where is the file....?" messages when re-opening a saved closed project, typical reasons
a. you have moved, deleted, or renamed files and folders that were imported into the project after the save close...when
you import media into a project, all you get are copies of the originals in the project. But the project needs to trace back
to the originals in the hard drive location where those originals were when first imported into the project.
b. if you store your source media on an external hard drive, the external hard drive may be malfunctioning and/or the
drive letter of the external drive changing for a variety of reasons. Does any of that apply to you.
Please review and consider, and then we can decide what next.
Thanks.
ATR

Why do my audio and video get out of synch?

No matter what sort of video I'm trying to play: Youtube, a movie on DVD, a movie on an external hard drive, etc, after a short time the audio and video get out of synch with each other. This is often, though not always, signaled by a short audio phrase being repeated (eg: "I don't know, Scully, how about you? about you?"). I can solve the problem by quitting the app and starting it back up but it will eventually screw up again.
I'm using a MacBook running OS 10.6.8 with a 2.26 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

Audio and Video Sync

Hey Gang,
Reaching the point of frustration with a relatively simple Imovie project I'm trying to create. I've imported 2 separate groups of .mov files created by a utility that extracted the video from a DVD (DVDxDV). In both cases, the problems began when I selected multiple files to import. The first file would come in okay but by the time the last one was imported the audio was completely out of sync and played the same section of audio for all the video. It seemed I could overcome this by importing the files one at a time until I found that even after doing this and having the files import correctly, over time the audio and video would get out of sync within imovie.
i have all the imports in a particular event and begin to drag segments to my new project. If i close I movie and come back to it later, the audio and video in the project starts to become out of sync. It then usually starts to happen when I preview the video in the event window as well. Importing requires so much time that deleting entire events and projects and starting over is driving me bananas.
Has anyone experienced this before or have any ideas as to what's going on?
Imovie 08 build 7.1.2 (577)
macbook with lots of free drive space.
no updates are available for imovie.
the problem is occurring within imovie before I export to anything.
Help!
Wayne

I am having the same problem. I am trying to use different video clips for talks. Once I have more than one clip in the video library, it plays audio from the first clip for all video??? Would love to figure this out.

Skype V. 7.6 (409) Mac audio and video problems

I am getting inconsistent problems with audio and video. Here are the problems when calling three different contacts.
1. Audio to Audio worked fine with my first contact, but trying to add video crashed the audio. This happened when I tried to add video, and also when the other person tried to add video. These same problems persisted regardless of who called whom. In the end, we had a good audio to audio conversation and were also able to send messages and share files without problems.
2. My audio and video were received by the second contact, but I could not receive audio or video from them. These same problems persisted regardless of who called whom. In the end, I used audio and video while the other person typed messages in response.
3. My audio and video were received by the third contact, and I could receive their video, but they could not hear my audio. These same problems persisted regardless of who called whom. We didn't bother trying to continue our conversation.
So, I checked all my settings to ensure audio and video were properly set up. Also, I made a successful skype test call. It is very puzzling to me since the results were inconsistent with each of these contacts. If the same problem existed at my end, then I could expect a hardware or driver issue on my computer, but sometimes the other person had the problem, I think. Can anyone help? Cheers

Lueh, try the steps outlined in the KB below. Looks like there is an issue with the full text index that can be resolved by removing/rebuilding.
http://blogs.skype.com/2015/03/18/skype-7-6-for-mac/
Please feel free to get in touch if you need any help.
Cheers,
Lando

1080i60 video captured file has 3-13 sec. time diffrence, audio and video

Similar Messages

Maybe you are looking for