1080p for Apple Devices not working in Compressor

Was happy to see the new settings for the ATV3 in Compressor, but it doesn't work. I keep getting a qucktime error -108 about a third of the way into processing. Plenty of memory is showing in Activity Monitor.
I've tried both a short and long movie, with quickcluster turned on and off, both fail.
I've tried all the suggested fixes I can find. Reinstalling Compressor, Stop/Starting/Resetting sharing, deleting preferences.
The same movies work fine with the previous Apple TV/Device settings.
Share from FCPx to ATV3 works, but it extremely slow for the longer movies, and I want to use Compressor and the quickcluster.
Is anyone else having this problem.

Some people (including me) have reported flakey changes in sharing after updating. (My issues, however, were broader than just Apple Device presets.)
If I understand your description correctly, sharing is working – just not for one preset – so it's questionable whether it's even Qmaster-related.
You've already tried the fixes I would have suggested – except you might also try Digital Rebellion's Compressor Repair.
Finally, take a look at this thread and see whether David's method works for you.
Good luck.
Russ

Similar Messages

Compressor 1080p for Apple Devices (10 Mbps) Does Not Include Dolby 5.1 Audio Track

Compressor recognised my file's audio properties as: AAC 5.1 (C L R Ls Rs LFE), 48.000 kHz
I use the 1080p for Apple Devices (10 Mbps) which should include Dobly 5.1 audio track
After the succesfful completion of any file the output file only includes a 2 channel audio track.

WIsh I could help and was hoping someone else would jump in with suggestions. The surround sound work I've done successfully is limited to the legacy versions of FCP and Compressor. When I've tested it in the FCPX to Compreessor workflow, I've not got it to work either.
I suggest you post your question in FCP X or Logic Pro forum to see whether you get some help.
Good luck.
Russ

HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrong

masterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message?

Fotostream - PC sync to Apple Device not working !

Hello,
i configured my FotoStream as it was written in the FAQ of apple.com.
The problem is, that Picutres or Videos i add to the folder on my Windows Computer were not synced to my apple device ( i Phone, close future also iPad*late november *).
I did all i read in forums. Deinstall all, reconfigure, use default path, set Fotostream back via icloud.com. Nothing works. It is for me an Important feature so tell me what can i do, that the Pciture in the PC Dekstop Folder get synced. The way from iPhone to PC works perfect.
i read that iOS 6 is the problem. Is that true ? Under 5 it should work ?! If it is like that, when do will be a fix released.
Thank you very much.
Regards
MM

Now ideas in the whole APPLE Support Communities ?! Come on ... -_-'

Save for web & devices not working (CS4)

I noticed today that I can't save for web & devices any more. when I try it shuts down the program and gives me the following message to send a crash report:
Adobe has detected that the application Adobe Illustrator CS4 has unexpectedly quit.
this started as a Photoshop CS4 problem where I also can't save for web & devices any more. before people jump down my throat again for mentioning this Photoshop problem on the Illustrator forum - this is for context only. I have the same problem in both applications. I just include this information here in case it helps. the Photoshop message I get is:
The operation can not be completed.
savign for web & devices worked totally fine up till last night in Photoshop. haven't saved anything out of Illustrator for web & devices in a while but it used to work just fine.
I have a PC and use Windows 7. All my Adobe products are up-to-date.
Any help is much appreciated. Thx a lot!

thank you very much. at least it happened before. I was seriously doubting myself. tried trashing preference files multiple times, but that didn't help. will reinstall everything and see if that does the trick.
thanks again!

Volume for bluetooth devices not working

I have a pair of Bluetooth headphones and since updating to Yosemite 10.10.3, I have not been able to control the volume of them with the volume keys on the keyboard or the volume in the menu bar 99% of the time. I have once gotten it to work and have no idea what I did for it to work. If I take the volume all the way to 0, it does mute the audio and the mute key still works as well.
Changing the volume manually in individual apps (such as with the slider in Spotify or in a youtube video) works but thats only when I use the mouse to move the volume slider.
I've done some searching around and it seems like Yosemite has numerous Bluetooth issues... I even had the horrendous screeching noise in 10.10.2 but that seems to be fixed now.
Mid 2009 Macbook Pro 5,3

I cheated and installed Windows 7 RC. ^.^
But something you can do is:
Click on the Start menu
In the search bar look up 'Services'
Open up Services
Double click 'Bluetooth Services'
In the 'Log On' tab check to see if 'Local Service' or 'Use This Account' is highlighted
If 'Local Service' is selected then you're SOL and you're best bet is to re-install Windows. That's what was selected on mine and no matter what Account I set it to Bluetooth would not work. I even tried re-installing the Apple drivers from the OS X disc.
But if 'Use This Account' is selected than I would look into the normal Bluetooth settings, as the problem is most likely there. You can also call MS and have them screen share with you, the guy I talked to said if 'Use This Account' was selected he could do more for me.
Anyways hope this helped a bit.

Bluetooth dongle for apple trackpad not working..?

Hi, I recently got this for my macpro desktop 10.6.8 without built in bluetooth :
http://www.ebay.co.uk/itm/400052901851?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1 497.l2649
Can't seem to get it working with my Apple trackpad, not sure if it's the trackpad or the bluetooth in general.
Anyone got any tips on setting it up please? Tried all the usual setup mentions. I get this message in the network menu:
Many Thanks
Jon

Ah ok, yeah removed the network settings.
Still not working. I've got fresh batteries in it. Pairing light is flashing on trackpad.
but im getting these screens:
Thanks
Jon

Microsoft Word (for Apple) dictionary not working

I have recently noticed that my dictionary on Word will not let me add new words to it, it previously allowed me to do so, it is on custom dictionary. I am not aware of having changed any of the settings.
Any help would be appreciated.

This would be better posted on the [MS Office for Mac forums|http://www.officeformac.com/ProductForums>.

Save for Web & Devices Not working

I am in the middle of creating a new web page using CS5 - sliced the components of the page and saved via Web and Devices as an html page.
Now when I want to go and save an ordinary jpg to post on my blog,via Web and Devices it only gives me the option of saving as an html file and there are no options to save as jpg or any other format.
Any clues as to how to reset the Save for Web and Devices setting so I can save in any other format other than html?

1.
2.
3.
-Noel

HD for Apple Devices (10 Mbps) not working

I use Compressor 4 to convert a bunch of videos...
Unfortunately the preset "HD for Apple Devices (10 Mbps)" is not working - result = "Failed"
but the setting HD for "Apple Devices (5 Mbps)" >is< working.
I have a Mac Pro 2010, 12-core 2.66 GHz with 32 GB RAM with an ATI Radeon HD 5870 1024 MB.
There should be no performance problem... but what's wrong? Any ideas how to change this?

I've found the problem... it depends on the file name. The file name was
Chill & Ride 2011 - slomo long v4.mov
I've changed the name to "slomo.mov" and it worked!
Strange...
The result: http://vimeo.com/34847568 ;-)

Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

Apple id not work for mac app store, what happen? It is available for others such as iTunes, my iPhone and iPad

apple id not work for mac app store, what happen? It is available for others such as iTunes, my iPhone and iPad

Try deleting the cache associated with the App Store..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Relaunch the App Store. See if that made a difference.

HT200109 Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?

Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!

I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later.

Cisco 877w - Apple devices not able to see wired apple TV

Hello All,
Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
Has anyone got anything more complrehensive I can read?
Thanks
David

Hello David,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
Case Description:
Cisco 877w - Apple devices not able to see wired apple TV
Case Solution:
The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
Next perform the same config your BVI interface:
Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
Other commands that I used to troubleshoot with were:
debug ip mpacket - Multicast Packet Debugging
debug ip mroute - Debug Multicast Routing
sh ip mroute - Show IP Multicast Routes
By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward.

ISE CWA redirection problem for Apple devices

Hi,
I'm testing some guest scenarios (CWA) in my lab using ISE1.3 and WLC2504 (7.6.130).
I have noticed that redirection to ISE portal doesn't work for apple devices (iOS 7 and later).All other devices like laptops,androids etc work fine.
Seems that the workaround on WLC that bypasses the CNA on iDevices doesn't work in my case.The device tries to open the ISE portal and shows just a blank page (attached photo)
The problem doesn't appear for devices with iOS 6 but only for newer versions.
I've also tried with version 8.0 on WLC without success.
Any advise?
Regards.

Captive portal/wispr support for apple ios7
CSCuj18674
Description
Symptom:
When attempting to access the Guest Portal with an Apple iOS 7 device while the WLC "Captive Portal Bypass" feature is enabled, the web sheet on the device still appears, preventing the user from continuing the flow.
Conditions:
The Apple device is running Apple iOS 7.
Workaround:
In the ACL on the WLC used for captive portal redirection and exemption of special traffic for the Guest Portal, add exemptions for the IP resources that resolve from "www.appleiphonecell.com" and "captive.apple.com" FQDNs.
IMPORTANT NOTE: These IP addresses are associated with the FQDNs of "www.appleiphonecell.com" and "captive.apple.com" and are subject to change by the entities hosting those domains. If the IP addresses do change, the ACL would need to reflect that.

1080p for Apple Devices not working in Compressor

Similar Messages

Maybe you are looking for