1080p no longer working correctly after Apple Update

Hello,
I've been running my Macmini on 1080p into my LCD TV for well over a year now with no problems. Until this weekend. Seems to have happened directly after the latest Apple update I did. The problem is, when displaying on 1080p about a quarter of the screen is cut off! The screen height is fine, and the left side of the screen is also fine, it's just the right side that is cut off. I can see up to about the wifi symbol on the menu bar, the time for example is off the screen.
I use a minidisplay port to VGA adapter to plug into my TV. I changed the resolution down to 720p and that fits but I don't like using this resolution as everything is too big and it's also a little blurry. I need my 1080p back!
Any ideas??
Thanks,
Dave

Hello,
I solved my problem with a workaround but the original issue is unresolved. I used an adapter to output to HDMI to my TV (2009 mac mini has no hdmi output) and now the screen resolution is correct. I am happy now.
However, it still does not explain why VGA output stopped working all of a sudden! I suspect some sort of change in the latest Lion update I did on the weekend.

Similar Messages

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

Wallaby animation isn't working correctly after app update

Hi DPS fellows,
This afternoon I've updated my Adobe Content Viewer and all my wallaby animations began to work in a different way.
It's just fades in instead of doing the animation.
Most of them are just animated letters for a headline. The animations consist in each letter appear at different time, sometimes coming form right, some form left or from the top of the page, but after the updated, they just appear in a fade in. Before tha worked pretty fine.
Does anybody here knows how to solve that?
Thanks a lot.

Hi!
I have a German manual with a step by step list. How you can use Path-Objects (Text and Frames) for an Wallaby HTML5 animation. And used in the Adobe DPS Folios.
If you want to have the manual in German, I can send you this e-mail tomorrow!
Bye!
Von: Felipe - dualpixel [email protected]
Gesendet: Mittwoch, 13. März 2013 22:10
An: D4c_Rene
Betreff: Wallaby animation isn't working correctly after app update
Re: Wallaby animation isn't working correctly after app update
created by Felipe - dualpixel <http://forums.adobe.com/people/Felipe-dualpixel> in Digital Publishing Suite - View the full discussion <http://forums.adobe.com/message/5146016#5146016

Keyboard backlight not working correctly after leopard update

My mbp originally came with Tiger (10.4), when Leopard (10.5) was released I updated. The backlight for the keyboard works normally until I installed the 10.5.1 update. After 10.5.1 and all other updates the keyboard backlight no longer worked correctly. In low light conditions or while working in the dark I have to manually turn it on instead of it doing it automatically. Is this a bug or is there a way to fix it?

Yes, I have to cover the sensors with my hands in order for them to turn off when light is back on, otherwise they just stay on.

Remote no longer works correctly after the latest Apple TV Update

I hope someone can help.
I have the latest Apple TV, purchased this year, and the update that was just released really messed things up in using a remote control. I've tried with both the original apple remote and my Harmony multi remote.
I can unpair/pair fine with either, but navigation just plain doesn't work. I press the down arrow, it may not move at all, it may scroll all the way down to the bottom of the screen, or anywhere in between. I press the select button, the icon on screen may do nothing, it may start to wiggle, or it may actually select it. Sometimes double clicking the select works as a single click.
After a lot of play around to get it to do what i want, i was able to do a full restore to factory, but that didn't change anything with the remote and now i cannot join the home sharing because the remote wont work well enough, so i can't use the iphone app.
As I said, I tried a full restore to factory, powering the Apple TV off, 2 different remotes, nothing works, help!!!!!
I have a pretty big iTunes Anime collection and I want to watch it!
I have an older Apple TV, but I'm afraid to even plug that in if the update is bad.

Sounds very odd - could be a hardware issue rather than software if more than 1 remote is affected. Strangely though some of my older white remotes seem to have beome very poorly responsive recently and I've replaced batteries in them only a few weeks ago, I think their keys are failing though.
If you have a recent iPhone this might help asssuming the bad AppleTV is an AppleTV 3:
Apple TV (3rd generation): Using an iOS device to set up ...

Bookmarking no longer works correctly after updating to the latest version of Firefox. How can this be fixed?

In the past, when I tried to bookmark a Web page, I had the option of choosing where I wanted the bookmark stored. If I selected "Choose," I would be presented with a list of all my folders. Not any more! Now, if I select "Choose," I am presented with only three options: "Bookmarks Toolbar," "Bookmarks Menu," and "Unsorted Bookmarks."
Firefox continues to become increasingly difficult to use, and appears to be less stable. I fell that I am being forced to migrate to Google Chrome. What is going on?
BTW, Firefox prevented support.mozilla.org from asking me to install software on my computer, so I was not able to automatically add troubleshooting information.
Richard
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

Rotation does not work correct after last update iOS 8

EVerything on the screen rotates with the Ipad except the icons of all my one hundred apps. After opening any app its content rotates, but after closing the icon of the app still has the wrong position. is this a bug And how I can fix it?

Hybrid Son Of Oxayotl wrote:
I may be a bit late, but I had the same problem. It seems to come from a faulty .desktop somewhere on your machine. Just try to remove parts of ~/.cache/docky/docky.desktop.???.cache (??? depends on your locale), until you find the right one.
My problem was due to /usr/share/applications/brasero-nautilus.desktop including this line :
NoDisplay=true;
instead of the correct :
NoDisplay=true
(I had quite a lot of trouble to find that one !)
You are not late, you are just in time, I tried to remove the semicolon after "true" before deleting one by one all the entries, and it worked right away! Thanks!

Power Spectrum no longer working correctly after upgrading to 8.0.1

Recently, I installed Labview 8.0.1 to correct a problem I was experiencing in 8.0. The installation resolved my problem, but now the Power Spectrum no longer gives the correct result. My program has not changed other than the update. I checked my circuit and everything is functioning properly. Before changing to 8.0.1 the power spectrum peaked at 40Hz and 80Hz, which was correct, and now it peaks at 0Hz and 10Hz. On top of everything, the peaks are much higher than they should be. I expect peaks with a max of 2.5millivolts and now they are 1volt. I don't understand what is going on. Nothing changed, but the software version. Can someone please help me?

In addtion to Altenbach's comments -
I'd recommend trying another VI function to get the power spectrum for
your signal to see if the behavior is the same. You can find some
examples of VIs using the power spectrum functions using the NI Example
Finder.
You can go to LabVIEW's Example Finder by going to Help >> Find Examples.
Then search for FFT. There should be some results that include FFT and
Power Spectrum Units.vi, Power Spectrum Measurement.vi, Basic Spectral Measurements.vi, and Spectrum Measurements.vi. Try opening and
running these examples to see if the VIs are returning the proper
results.
Mark Walters
Application Engineer
National Instruments

Text replacements no longer working correctly after Mavericks install.

Since upgrading to Mavericks (MBA2011 13inch) only a select few of the text replacements still work. For example, I can still write (c) and tm and have them change to what they should be, but the fractions, and custom ones like gmc, omw, or the apostrophe ones no longer are substituted. I tried deleting them and entering them again, but it does not work. They worked fine in 10.8, and I didnt change them until I noticed it had stopped working. Any ideas?

I have also noticed new in Mavericks is that if you type something that can be text substituted and you stop at the last character, a small box with the replacement pops out with the option to cancel the replacement, similar to how it works in ios.
However, I still have my problem where only certain susbstitutions work and exhibit this, while others do nothing ever.

Help: Camera No Longer Works Properly after Software Update

I can no longer use my blackberry camera outdoors. Even if I set the white balance to outdoors, the entire image is white. I used to be able to take brilliant, clear pictures outdoors in direct sunlight. I even used to be able to take pictures of the sky. Now, even on overcast days, all I get is a white mass of nothing.
I'm really upset because I used to use the camera a lot.
It's also really slow in moving from the camera app back to the main screen.
Is there a way to uninstall the software updates or restore the phone to factory (pre update) settings?

Yes, you can install your older OS (check your carrier website for the download) to your PC.
Then you can downgrade to the old OS.
See more here:
http://www.blackberryfaq.com/index.php/How_do_I_downgrade_the_OS_on_my_BlackBerry%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

The image sequence function stopped working correctly after recent update?

I have been using this function in quicktime 7 pro several times a week on a large project for over a year. After the most recent update to mavericks, the DSLR and gopro jpegs now open in digitized chunks of random colours. I have not changed my workflow or the gear in any way. I used the exact same files on my macbook air, without the recent OS update and was able to open and export the files like normal.
The updated machine is an iMac running OS X 10.9.2 with 3.4GHz i7 and 32gb

I'm still experiencing this problem. Is there anyone else who uses this function and has recently run into trouble?
What image resolution(s) are you using for your image sequences?

After installing the Maverick upgrade my Apple Mail search and flags no longer work correctly?

after installing the Maverick upgrade my Apple Mail search and flags no longer work correctly? I've already rebuilt the mailboxes with no change in the problem. What else can I do???

Hi as2020,
If you are having issues with Mail in Mavericks, you may want to make sure you have updated to the most recent release. You may find the following article helpful:
OS X: About Mail Update for Mavericks
http://support.apple.com/kb/HT6030
Regards,
- Brenden

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

1080p no longer working correctly after Apple Update

Similar Messages

Maybe you are looking for