1080p Project with 1080i Video Content

I was given material shooted with a Sony HD camera. The material was shooted as 1080i HD (1440x1080 - 25fps).
So I created a new event and added all the material directly from the camera. Then a new project and added all the videos I wanted to use for my project. Then I changed the project properties to the ones that are shootable for the job been 1080p HD (1440x1080 - 25fps). Is this a correct method to changed interlaced contect to progressive or is it preferable to first use compressor and then add all my content to FCPX? I decided to do it this way because the videos from the Sony HD are too many... I am doing something wrong ?

While Compressor does a very good job at this, I would give FCPX a chance to do the de-interlacing and see whether you are satisfied with the results. Chamge the project settings to progressive; select a representative section of your time line with the range tool and export as a master file. Open the exported file in QTX and see what you think.
Russ

Similar Messages

  • How can i stream my powerpoint presentation with audio video content to the display devices

    i wanted to stream my Power point presentation with audio/video content inserted in between the slides how can i achieve this requirements
    is there any harware or software available for this
    Please let me know
    Thanks

    This is not a straightforward procedure. I normally take the exported PPt file onto a windows machine and import the video files into PPt before sending to a client
    Once the folder is copied to windows, the video files have to be imported  again manually to relink the files as they loose the link in the export
    Check that the video files are copied into the same folder as the Powerpoint file
    The only file types playable from Powerpoint in widows are:   mpeg   wmv   avi
    Use wmv for  best quality and compatibility

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • Problem with some Video Content not able to be shown. no Plug in for it

    I am getting a Problem with some News Sites Articles Video Content not being able to be shown, BBC, YAHOO,etc I am getting the message/has content of Mime type Audio/x -pn-RealAudio-Plug in Because you dont have plug in for this mime type it cant be displayed. Also I am getting a Message Url not Valid
    Help Please. Thanking You
    I .Mac 17   Mac OS X (10.4.8)   intel core 2 duo

    Did you install Real Player (free version)?
    <https://order.real.com/pt/order.html?country=US&langu
    age=EN&mppi=0&mppos_list=0&mpst=0&ppath=cpmacpl060204a
    &pageregion=playerbutton&pcode=rn&opage=realhomespma
    cbb&src=realhome_spmac_bb_0_1_1_0_0_20>
    Okay, so here's a question from a new to mac guy. Many issues on old PC with real player and Media Player not getting along. Eventually had to delete real player and had to reinstall windows. I would like to avoid third party software if possible and stick with Quicktime. How do I install the mime plug in without installing Real Player?
    17" iMac   Mac OS X (10.4.8)   intel duo
    17" iMac   Mac OS X (10.4.8)   intel duo

  • Best method for building a project with multiple video tracks

    I'm working a project where a client wants some edits made to an existing DVD they had - some video tweaks but mostly menu changes. I'm rebuilding the menus from scratch and I've ripped all the video files from the DVD (there are about 80 of them on one DL-DVD), transcoding them with DV-DVCPRO/NTSC settings.
    The problem is when I import them all as assets into my project build, the DVD disc meter shoots up to about 12 or 13gb. What I've done is added them all to their own separate track, as they're meant to be played not as one continuous video but individual sessions.
    What I'm wondering is if there is a better way to build it that would reduce the amount of space it takes up (I'm rather new at DVD Studio Pro, so I can't tell if I'm going about this the wrong way or not), or if I need to compress the video files or re-transcode them using some other settings (H.264? I'm trying to maintain as much video quality as possible).
    Any help on this would be much appreciated, thanks.

    What is the running time? You should encode to m2v and AC3. Take a look here
    http://dvdstepbystep.com/faqs_7.php

  • Can I re-use & edit old dvd project with new video/audio??

    I video a dance company's Christmas performance each year and I plan to use the same theme and many of the titles and scenes are the same. So I'm hoping there is a way to bring all the work I did last year in iDVD forward and just make any updates to the scene titles as needed. All the video and audio will be new and I'll prepare it in iMovie with chapter markers as I did last year. If I can import the audio & video into iDVD without redoing all the text and buttons it would be great. Has anyone had experience with this?

    Brian,
    If you "archived" the iDVD project then the answer is yes it's pretty easy - I recommend you do that this year!
    If you didn't archive the project, then you've got some work to do. There are some applications like DVDxDV, MPEG Streamclip+the Apple MPEG2 Playback Component, and ExportToQT (which come with MPEG2Works) that will convert the VOB MPEG 2 video files on your DVD back to DV files that iMovie or FCP/FCE can use again. But it is time consuming to convert back, and some of these apps are easier than others.
    You might try DVDxDV to see what's involved. There is a trial version. Even so, you'd need to re-build the menus, etc...... and if you have all new video, I don't think it will help much.
    So my bet is you'll be better off just starting from scratch this year.....but then archive the project to use next year!
    http://docs.info.apple.com/article.html?artnum=164936
    John B.

  • Problems with watching video content in Safari

    After updat to Lion, I have problems watching video conent on webpages with Safari. On some pages it doesn't work at all while at other it stops intermittently. I have tested same pages with Chrome without having problems. Who can help with this annoying problem.
    In addition there is an involuntary zoom while reading page in Safari
    WhileI am typing in text or Safari ther is also an involuntary switch to in finder there is an involuntary to Launchpad.
    Does anybody else encounter similar problems, and if so how did you solve this?

    Yeah, I'm beginning to think that flash is more hassle than
    it's worth. It's just so unbelievable to me that such a widely used
    technology on the Web still has no way to be used in a validated
    XHTML document! It's really quite absurd actually! I tried
    uploading my original flash heading (without the satay method that
    is) and it looks fine in Safari. The down side is that all my pages
    now contain errors when I try to validate them as XHTML 1.0 Strict.
    I guess that unless someone can help with another alternative
    to the satay method that actually works across all the main
    browsers, I'm just going to have to have pages that won't validate.
    How incredibly disappointing...

  • How to save a project with all its content?

    Hello,
    I am looking for a feature inside CS5 Premiere which would do something similar to pack in InDesign that not only saves the project file but packs all links into one folder.
    Thanks in advance
    Wiktor

    Thank you very much for your quick response!

  • Video content path

    Dear forum,
    I am putting together a Cross platform (MAC/PC) CD Rom with
    streaming video content.
    All is fine when I publish and test on the Mac, but when I
    test on the PC the Video does not show at all.
    Could this be some thing to do with the content path?
    Or am I missing something obvious
    The flv file is in the same folder as the projector.
    Thanks for any help, Gareth.

    I should check again, but I believe I put them all in the
    same root folder, does the videos .SWF have to be uploded too? I'm
    trying to test the videos.swf from my local drives before I upload
    to the server, is that my problem? Do I need to put all files on
    the web server first before I run my test?

  • After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video c

    After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video content wether its from Netflix or streaming from my iTunes library

    You might try restarting the Apple TV by removing ALL the cables for a 30 seconds. If that doesn't help try using another HDMI cable.

  • HT3209 I got a new apple tv 3 how do upgrade my video content to 1080p

    I got a new apple tv 3 how do upgrade my video content to 1080p for the orginal purchased version at 720p?
    Cheers,
    Michael

    Yopu can stream it on the AppleTV  from the internet under Movies > Purchased (or Purchases? I can never remember which!) which will bypass what's in iTunes provided AppleTV is configured in Settings for iTunes store for 1080p.
    If you want a copy in iTunes, then go to Preferences and change download preference to 1080p.  Then delete the 720p copy and redownload from the cloud (iTunes home page icon > Purchased link on the right).  If you delete the 720p copy and it goes to trash or recycle bin, you can fish it out of there and add to iTunes later if you need a 720p version too (or SD if that gets trashed with the 720p copy).
    Note - currently you cannot upgrade SD purchases to HD.  Even for an upgarde fee.
    Ac

  • Clueless how to mate the AC3 sound file given me with my video project

    Hi gang. This morning I started researching how to do this, but haven't figured it out yet.
    My DSLR projct has ben edited on Premiere Pro CS5. I created the project in stereo and once I picture locked, outputted an OMF file to the sound mixer.
    He just delievered to me an AC3 file. I've no idea what to do next.
    I'd like to mate the AC3 with my video, of course. Do I do that in Premiere Pro? Do I export an uncompressed AVI video file and somehow mate the two together somewhere else?
    Clueless here.
    (of note: This Friday I am having a screening of three of my short films, including this one. The screener will be on DVD and has to be an auto play DVD, something you can pop into the player, no menus, it just plays and goes from video to video. I created a couple test DVD's in Encore and it worked.)
    Heres all the specs for the export:
    Name: Dolby Digital Professional 5.1
    Description: Dolby Digital 5.1 audio at 448 kbps
    File Extension: ac3
    Estimated file size: 192.26 MB/hour of source
    Segmentation on cluster disabled
    Audio Encoder
                    Format: AC3
                    Sample Rate: 48.000kHz
                    Channels: 6
                    Bits Per Sample: 16
                    Target System: DVD Video
                    Data Rate: 448 kbps
                    Compression Preset: Film Standard
                    Audio Coding Mode: 3/2 (L, C, R, Ls, Rs)
                    BitStream Mode: Complete Main
                    Center Mix Level: -3dB
                    Surround Mix Level: -3dB
                    Dolby Surround Mode: None
                    LFE Exists: Yes
                    Dialog Normalization: -27 dbFS
                    Copyright Exists: Yes
                    Original Content: Yes
                    Audio Production Information Exists: No
                    RF Overmodulation Protection: Off
                    Channel Bandwidth Lowpass Filter: On
                    DC Highpass Filter: On
                    LFE Channel Lowpass Filter: On
                    3dB Attenuation: Off
                    phase 90: On
                    Deemphasis: Off

    Export out a video file.  Bring that and the .ac3 file into Encore for DVD authoring.

  • Idvd project with video and slideshow for dvd-rom file access

    working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
    17" Desktop G5   Mac OS X (10.4.2)  

    Steve,
    It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
    I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
    Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
    What is your exact workflow from PrPro, into Encore?
    What brand of blank media are you burning the DVD to?
    This ARTICLE will give you some tips.
    Good luck, and let us know a bit more,
    Hunt
    PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

  • Stabilization for the project with the different video settings

    If i open project with the settings for 1080p video and then add to it 720p video, how can i make stabilization for it? (When i open another video with the different sequence settings it does not allow me to make stabilization)
    Is there any way of working in one sequence with the different settings of the video?

    Footage that does not match the sequence setting nest first then add the Warp.

  • How is the best way to export my project with clips and videos?

    I would like to save my project and export the project with clips and videos included. What is the best way to do it?

    Can you clarify:
    clips and video
    Seems as though you want to retain the original media?
    Export as a Master File to get a good quality export file of your Timeline.
    Al

Maybe you are looking for