1090T Temp monitoring question

Hey all..Got a question..In my BIOS my CPU temp is 41c to 42c..And in windows when I run Core Temp 0.99.8 its telling me its 20c to 24c...and its the same with CPUID hardware monitor 20c to 24c..So really what do I believe??
My CPU is overclocked to 4.3ghz and running fine..with 1.53v..Just would like to know its real temp..I can touch the heatsink and it is cool..

What does hardware monitor and Core Temp state when you run all the cores full tilt using Prime95 or some other CPU(all cores) stressing program? When you're in the bios, the cores are running full tilt.
BTW, the finger is a poor heat sensor.

Similar Messages

MSI 6600 GT question...Temp monitor on 6600GT?

I'm about to return my XFX 6600GT because of problems. How is the MSI version of the card? Is the temp monitor available under Nvidia properties?

Just my copy to another reply:
I have the same card but use nVidia drivers to give me a temp read on the GPU. I have loaded from scratch and like the nVidia settings screens because they give you more options. Below is my overclock with MSI drivers and nVidia drivers. The overclock is about the same so it depends on your use of the card...automated with MSI & DOT, manual with nVidia. My GPU Temp read is around 47c to 48c.
K8N SLI - winni 3000+ oc 220x3=660 HTT
MSI 6600GT x1 oc 560/1.12 Ghz = nVidia Drivers only
Corsair value RAM 512x2 oc 200:200 2.5,3,3,7 prime95 stable 2.7v 220 memspd
3DMark05 = 3949 PCMark04 = 4052
K8N SLI - winni 3000+ oc 218x3=654 HTT (MSI level 5 maxed DOT) with CnC enabled
MSI 6600GT x1 oc 555/1.11 Ghz = MSI Drivers only (MSI level 6 maxed DOT)
Corsair value RAM 512x2 oc 200:200 2.5,3,3,7 prime95 stable 2.7v 218 memspd
3DMark05 = 3833 PCMark04 = 4023
To get accurate temp reads on your CPU and system and much other stuff, I use Everest (www.lavalys.com) and with quick reboots it seems fairly accurate. My CPU core is usually between 35c and 37c and my system temps are around the same.....................

It ALL works (mostly)!!! CPU Temp Monitor??

Just finished assembling my new system and loading it up this weekend, and amazingly, it works. Even with CL3 ram it runs much faster than a P4 1.8A on SiS 645/DDR333 board I had. I am amazed at how big a difference there is in the way XP Pro loads and retrieves data and how smooth it sets up. I did not have to load ANY drivers! A huge step forward from 98SE.
The only issue appears to be that the temperature monitor is out to lunch (So was my last board the SiS645 one, it did the exact same thing) for both CPU and Case. I installed a seperate case system to monitor temp and it gives me 22 deg C after I rearranged the airflow from the fans. I am thinking of drilling out the stock heatsink and inserting one of these temp monitors to real time monitor the CPU.
Has anyone come up with a good way to really monitor CPU temps with this board??

Hey,
I loaded up MBM (after I figured out what it was and where to find it). It seems pretty good: The case reads 37 deg C (my independent sensor reads 27 deg and bios says 47) and CPU reads 47 deg (bios says 57).
The real questions is : My -12 volts reads -6, and I have played with the settings to find the right sensor, and every sensor I select changes all the voltage readings. Is there a specific selection for readings that sets this up right?
Also, I found a Lian-Li temp sensor with thin tape probes that is designed to be set between CPU/Heatsink to provide real time accurate monitoring for chips (theres two, so I plan on doing CPU and NB), so I will have real data instead of hoping it is right. (19.00 US). Nice little 3.5" or 5.25" models avail in black, silver or beige.
Nick

Core temp monitor program for hp touchsmart 610-1250

Hi,
Re: HP TouchSmart 610-1250, 64 bit, Win 7.
This is a new computer, my first all-in-one, and I want to monitor core temp. My CPU gadget tells me this has no core temp monitor system. Is it possible to download a monitor?
As an all in one, I'm concerned about heat build up, since I'm using it all day.
Any info is appreciated.
Thanks
A
This question was solved.
View Solution.

Have you tried SIW? (System Information for Windows by Gabriel Topala) I highly recommend it. Go to the sensors page after you open it, and then It should tell you.
Please give Kudos. What other kind of recognition could I get?
Have I solved your problem? Mark solution as accepted.
I try to hate Macintosh. I really do. But I can't bring myself to hate any electronic device.

Recommendations for server rack temp monitoring?

Our server room isn't large, we only have one rack with two Xserves, an Xserve RAID and a few other things. But temperature is obviously a concern and I worry about the day when the portable AC unit kicks the bucket and I'm away from the office.
Does anyone have recommendations some kind of temp monitoring device with email notifications, maybe web monitoring?

At work, we use a rack-mount Senturion Environment Monitor, it monitors the temp, humidity, etc. It can send SMS and email alerts, and you can monitor it on the web, it just needs power and a network connection. We got it when our AC actually did kick the bucket and 50 servers overheated. :-/

MSI GeForce 6600GT temp monitoring

Hi, i was just wondering if there was a pre-modded / tested bios available that enables temp monitoring in MSI's 6600GT VTD-128. I didn't think i could hex it myself so i just wanted to know if anyone had success doing it.
Thanks,
~Snikkle

Hi you could check those sites like this : Enabling Temperature Monitoring on the nVidia 6600GT
but I wont recommend you to do that if you are don't know a lot about computers and updating/editing bios.
kind regards
and remember do it at your own risk.

Temp monitor for ppc?

what cpu temp monitor can be used for ppc mac mini or ppc mac?
using http://www.bresink.com/osx/TemperatureMonitor.html the widget one and i think that it is reporting the harddisk temp and not the cpu temp since it has the only option of "SMART Disk hardisk model here" and gave me a 45C-49C temp

I don't think there is a CPU temperature sensor on the PPC mini.

Best temp monitor program for K8N and 6800GT?

I'm looking for a temp monitoring program that will display the following temps:
CPU
Chipset (system)
GPU
Core Center is ok but it doesn't allow for precise history and it doesn't display GPU temp.

The only thing I can suggest is a hardware thermistor and display, I have a GMC X-21 case which has a small temperature display on the font, and you can place the thermistor anywhere you like. I have it in between 2 fins on my CPU heatsink and it reads the temperature exactly the same as corecentre.

Preferred cpu temp monitor softy?

what is the good cpu temp monitoring softy for 875pneo? i mean the accurate one. I've used aida and core center but yield different result. dont know which one to use... thnx!

I have been using motherboard monitor for years and is simply the best freeware monitor around. It even does OSD scripts with xml coding.
Motherboad Monitor
G16aByT3

Help enabling temp monitor on VGA

i have an MSI G4TI4200 working perfectly for sometime overclocked to 310/640.not bad.....after taking off the heatsink on the VGA i found a temp diode next to the GPU so i wandered why it never worked.........any way i want to know how to enabled the temp monitor on my VGA so i can see it on my nvidia applet.......can i use that trick fo G6600 by altering the bios using the HEX editor and reflashing......i mean does that tirck work for all nvidia card.........any idea are appreciated thnx
P4 2.6C OC to 3.2
2xA-data ddr500 dual
seagte sata hdd 80GB
MSI G4TI4200 64mb 8x
NEO 2 -PLS plat
Vantec 400W psu

i am using the 71.84 the latest one from Nvidia website...........but nothing shows in the tab plus i have the latest coolbits registry ..........that didnt help ether.........one could this mean.....that the temp diode on the VGA is just for decoration .........or it doesnt work. I think it could be a Bios problem.....my Bios right now is A0 for the VGA maybe i need to flash it. Any ideas of how to do that thnx alot

Temp Monitor issue

I just did a clean install on my blackbook, and reinstalled the temp monitor 3.9 version.
Now the issue is that it does not read the processor temps but just the harddrive temp. Also it prompted me that I needed to install some intel drivers.
Problem is I clicked NO by accident. Is there anyway I can get the drivers again??
Does anyone know what these drivers were, or where I can download them??
Any input would be apreciated.

In the Temperature Monitor menu named "Monitor", there are two choices called "Install driver for extended x86 support" and "Uninstall..etc". If you haven't installed the driver, the install option should be available (with the other grayed out). Click to install.
It 's a kernel extension needed to read the CPU temps.

Temp. monitor for Neo4 SLI?

Can anyone recommend me a program that's like Motherboard Monitor for the Neo4 SLI? I'm looking for a program that will display the temps in the system tray. Too bad MBM is discontinued

the current system temp monitor program i'm using is Systool. it autodetects your mobo and videocard. it has a whole bunch of other stuff too. it even detects videocard temps. check it out @ http://www.techpowerup.com/systool/
there's ALOT more you can do with it too. but that's for you to find out.

Temp monitoring for 5700 ultra

ok..1st off..i dont have a msi vid card..i have a PnY..fx5700 ultra...card runs fine..no issues(cept for an occational..."power supply not plugged in")..but my question is this..in the Nvidia card properties area..theres a spot that monitors my card core temp..and its set at 129 celceus...which is not possible...my case would be on fire if it ever got that hot..what i want to know is there any way to manually set the temp warning to a setting of my choosing..i mailed pny about it..and believe it or not..there answer was"make sure your fans plugged in"lol
i sat in utter amazement at the respone they gave me

ok...thx alot...im sure they know better then i do...it just seemed to me that was a bit high...id like the option of setting it to a temp of my own..but i guess its not possible...and i wanted to return the card to the store i bought it from..but in a rare case(i always put comp part reciept in the box it came from) i lost it ..i can return it through pny...but i dont wanna deal with the hassle right now..if it fails completely...then ill return it and put my ti4400 back in..once again..thank you

Fan / Temp monitoring

I noticed my fairly new Satellite P50 fan was running almost always for some reason even when running only Chrome. It was pushing the I7 processor and using 18-20% of it's power constantly for just surfing. Chrome also was running 4 processes at any one time even with only one window open. I think there is some flaw in chrome but it got me wondering if there is a temp / fan monitor that toshiba has available or if someone can recommend one.
THanks!

Thanks so much for the link. I tried Coretemeter and it works like a charm. It doesn't even require any installation software!!! Now the question is what kind of temp. do you guys normally see for Toledo? This is the first time I get to see the temperature on this Toledo and it surprises me that both cores are running average around 33c w/ max at 43c? Is this normal? I haven't quite figured out how to go abt. upping the Vcore on Bios 1.2 but this is not a bad start?
BTW, I can only find bios v1.2 and v3.0 beta. Care to elaborate your thoughts on v1.34 and perhaps point me to a link?

K8N Diamond Plus temp monitor w/Vista 64-bit

Well this is my first time ever posting for help like this but I've searched to the ends of the net with no results. What I have is a need for a hardware/mobo monitor that will work with both the K8N D.P.(MS-7220) and Vista 64-bit Ed. None of the MSI related applications (Core Center, etc.) work and for some reason Speedfan v4.3 wont work either. I can install it but it will not show anything more than CPU and RAM usage. Does anyone know of a program that is compatible with this board AND Vista 64???
The reason for the importance is I flashed my BIOS prior to upgrading to Vista... I forgot to write down my BIOS settings from when I built/slightly OC'd the machine. Now I have to start all over again but nothing seems to work on this configuration other than Prime95... so I cant change anything while Windows is running (not really a big deal, just takes longer) but worst of all I cant monitor my temp... even now.
Thanks in advance for any help.

Thanks Hans...
But with Vista having been on the scene for quite a while now (beta wise) there is an overwhelming supply of compatible programs out there... the problem lies more with this board than VISTA. I have found there is VERY little support for this board... which was actually in short supply upon its release. Even on MSI's site there is Vista support for many of the drivers and applications with other NForce4 boards.
This is why I brought my question here. Just hoping an MSI guru around here might have a clue as to a program that'll work with this board or if MSI is planning on updating Core Center to work with Vista anytime soon.
I have controlled the fans in the BIOS, I just need to know the temps DURING torture tests and not after a reboot.

1090T Temp monitoring question

Similar Messages

Maybe you are looking for