1099 Printing PLD

The 1099 form 2 records on a page does not line up  correctly. The top part does but the bottom part does not, the information does not line up in the boxes. I can't touch the top part but need to move the second record further down. How can I make the PLD make more space between the records.... Thanks

Rosi,
You may check this: Re: 1099 Form - Misc doesn't print 2 forms per page.
Thanks,
Gordon

Similar Messages

  • 1099 - Printing Process In SAP FI

    Hi SAP Guru's,
    what is 1099 printing process is?
    what is the use of that ?
    What are the steps for that can any one help me please.
    Thanks in advance,
    Bhaskar.
    Edited by: BHASKAR@123 on Feb 1, 2012 9:34 AM
    Edited by: BHASKAR@123 on Feb 1, 2012 9:35 AM

    Hi Expert,
    Just Configure the 1099 MISC Reporting-US Withholding tax as it given in the below link.
    http://wiki.sdn.sap.com/wiki/display/ERPFI/1099MISCReporting-USWithholdingtax
    http://wiki.sdn.sap.com/wiki/display/ERPFI/1099MISC+reporting
    and follow this 1099 Report - Selection Criteria as provided in the below link.
    http://help.sap.com/saphelp_sbo2005b/helpdata/en/56/cb4142f5efaa04e10000000a1550b0/content.htm
    Regards,
    GK
    SAP

  • Printing PLD through Line printer

    Hi All,
    Is it possible to print PLD through a
    Line printer - Star SP 200. If yes,
    please guide me the steps.
    Regards
    Deep

    Hi,
    Thanks for replying,
    What are the three printers that are supported and since we have some
    Star SP 200 printers ,is there some way we can print PLDs though this.
    Regards
    Deep

  • How to print PLD report on A3 & A2 size papers

    Hi,
    I want to print the PLD Report on A3 size paper.
    In Tally, already this Report is printed as "Sstd Fanfold" paper.
    i selected the same paper type in SAP b1.
    but it is not displaying properly.
    normal A4Traversal it is showing.
    plz help me asap.
    Regards,
    Nagababu

    Hi Nagababu,
    If you want to set the PLD Report to Print on a different (A3) size paper, Couple of things you may need to check.
    The printer where you intend to print on A3 should be set as the printer in the PLD document properties.  From the design mode of PLD, click on <b>Print layout designer on the top menu</b> and Click <b>Display Document Properties</b>
    Go to Paper format Tab > Select the Printer which you want
    Doing this will expose the different Paper formats available on this Printer.
    Now, for the Paper format drop down select the A3 / whichever Paper format you want.
    Suda

  • Print PLD

    Hello to all. When I stamp a PLD on a printer X, the impression this OK, but when I do it in a printer And, the lines work out discontinuous. Has someone some idea of since solving it?. Thank you.

    Hi
    If you are using a dot matrix only 3 models are supported in SAP B1 as per the Administrator Guide.
    If the printer is multifunction fax, printer and copier (deskjet or laser) it is not supported.
    Paulo Calado
    SAP Business One Forums Team

  • Check Printing PLD

    Hi Guys,
    I am trying to design check using PLD which is Check Stub Stub.What customer need is data to get picked up from Invoice showing details of what is the total amount,how much is paid and what is the remaining amount.
    I tried by picking up value from database directly also tried using the variables but it is not worming.
    Need help thanks in advance
    Regards-
    Mona

    Hi,
    Some of the reports in SAP are hardcoded. It is not possible to find system variables and modify system layout.
    Thanks & Regards,
    Nagarajan

  • Print pld variable

    Hi,
    in sap b1 which table sap use  to memory the variables? i want to find variable 61 ( total payment for an invoice) and i want to find its table, if it is possible? thanks a lot

    As I see the variable 61 is the RCT2.BfDcntSum or RCT2.BfDcntSumF depending on the  currency.

  • Crystal Report unable to print out throught Remote Desktop from server

    Dear All Expert,
    I am facing problem when print a crystal report layout from SAP B1 8.8 through Remote to Server, print to Client machine. It will promt out Error Message "thunking spooler apis from 32 to 64 process has stopped working fix", but if print PLD, then it is work. Any Idea? Client machine using Windows 7 facing this problems, earlier using windows XP is fine. Thanks a lot.

    Hi Gordon,
    fyi, I have Turn Off UAC for the client machine (Win 7 32 bit), do the checking from command prompt (srf/scannow), uninstall the printer driver and reinstall the correct printer driver for server (windows server 64 bit), client machine (win7 32 bit), reboot the machine. Do the setting from internet option > Advance> 
    1. Allow active content fro CDs to run on My Computer*
    2. Allow active content to run files on My Computer*
    3. Allow software to run or install even if the signature is invalid.
    But all of the above could not resolve the problem happen. It happen only print SAP B1 8.8 crystal report layout. Others PLD layout is able to print. Please Advice.

  • Changing Withholding tax base amount- 1099 payment

    The scenario is:
    Classic withholding tax functionality to be used for first time, the configuration was done last year.
    1099 needs to be printed with all payments made out to the vendor.
    There were payments made out to the Vendor in year 2011. There are some payments that show as WT exempt amount  in RC and other payments are displayed as WT base amount in RC while running RFIDYYWT or 1099 print out report.
    I used RFWT0020 program to regenerate the WT and Change to source tax code. It just updates the tax code on the payment document but is not changing the payment document amount from WT exempt to WTax base.
    So the 1099 printout is not showing the total payments made, it is excluding WT exempt amount in total.
    Any suggestions?
    Thanks
    Edited by: Gary_S321 on Jan 11, 2012 10:30 PM

    Rebecca,
    You need to update the WTax base amount field on all the payment documents that are blank.
    For that just go to Vendor line item report FBL1n and run it for all the 1099 vendors. Change the layput to add WT base amount and WT Code in the report output. Filter the documennt type with payment doc types ZP and KZ and WTax base amount zero.
    Extract these transactions into excel and then write LSMW to mass update these tax base amount field.
    To update only Tax code on these transaction you can use RFWT0020 program.
    Hope this helps.
    Thanks

  • SMARTFORMS printing is shifted to the right

    We are having a problem with a SMARTFORMS for 1099 called IDWTCERT_US_1099MISC. We noticed that the print preview after testing the 1099 and the print preview from the SPOOL (trx SP01) shows the 1099 form OK, but printing it out cuts off the right side of the form/image by about 1.5 CM.
    There are two things we've tried so far:
    1) In SPAD, we have adjusted in the Output Attributes Tab of the DEVICE the area called Additional SAPScript and Smart Form Information. Here, the horizontal move can be entered as a -10 (in millimeters) for instance.
    This didn't work for us, as it only shifted the truncated (bad) image to the left 1 CM, thus centering an incomplete image.
    2) Before printing from the spool in SP01 we changed the printer from the device type to be LOCL. This worked OK, and the 1099s print nearly centered and not cut-off on the right, but we are not sure that it will work well when we print the 1099s in the production run.  (i.e. if this is in an adjustment that they can even make...or if it will correct the problem in the same way on a different printer).
    Could someone please help with more feedback on this issue to see if using LOCL is the best way to do this, or if there are other, more global, settings that I can make to correct this.
    Last resort, I could download and shift the background image or something. Shifting the background image would be difficult, however, not to mention it would make all the SMARTFORM fields on the 1099 print in the wrong spot.
    Thank you!!
    Jeremy

    As you know, for 2010, you must apply 1535966 for the 2010 Smart Form 1099 reporting.
    Note 1546868 just came up to fix the truncation on the right issue.  We are about to apply this note and I will respond with our results shortly.
    FYI - Here is the sympton from the note:  "After Oss Note 1535966 was applied,the form print is truncated towards right."
    -Ken

  • Check Printing on two Different pages

    Hi all,
    Is it possible to print one page PLD on two Different pages. Actually my client  wants  to print one PLD on two different pages, he wants that one page print the acknowledgement letter and then vendor name, amount, date, amounts in words should be printed on the checks.
    With Regards,
    Pankaj Sharma.

    Hi Pankaj Sharma,
    Check Printing PLD is hard coded in the system.  I don't think you have any easy solutions for this.  If you tried already, you must know it already.
    Thanks,
    Gordon

  • Smartforms layout printing diffrent in diffrent printer

    Hi,
    I have a layout designed in Smartforms. Till now it was printing fine from a specific printer but when using diffrent printer it is not printing well. Major issues are:barcode not showing, Font size is bit smaller & some text from the right hand side is missing. Is there any printer issue we need to fix or do i need to design diffrent layout for this printer? Please advise.
    Rgds
    Sid

    We are having a similar problem with SMARTFORMS for 1099 called IDWTCERT_US_1099MISC.  We noticed that the print preview after testing the 1099 and the print preview from the SPOOL (trx SP01) shows the 1099 form OK, but printing it out cuts off the right side of the form/image.
    There are two things we've tried so far:
    1) In SPAD, we have adjusted in the Output Attributes Tab of the DEVICE the area called Additional SAPScript and Smart Form Information.  Here, the horizontal move can be entered as a -10 (in millimeters) for instance.
    This didn't work for us, as it only shifted the truncated image to the left 1 CM.
    2) Before printing from the spool in SP01 we changed the printer from the device type to be LOCL.  This worked well, but we are not sure that it will work well when they print the 1099s in the production run.
    I'd love to get some more feedback on this issue to see if using LOCL is the best way to do this, or if I can shift the background image or something.  Shifting the background image would be difficult, however, not to mention it would make all the SMARTFORM fields on the 1099 print in the wrong spot.
    Further ideas?
    Jeremy

  • Check Form/Script

    HI friends,
    Im working on Check script form whereas i find difficulties whiel printing the details in original cheque thru Dot matrix printer.
    The problem is, the name of the bearer (text) when printing in the row line is going differently on each document no. including the amount in words and figures.If is set for one document correctly,it may differ in another document.
    Pls advise, how i can set it correctly or it'll be better if i go by Smartform.
    The current calling program is script based one.if its good to go by Smartform,then if anyone having std program for Smartform print, pld post it on ur reply.(SAP ECC6.0 version)
    Pls reply.
    id :sankar1781@gmail
    thanks&regards
    sankar.
    sankar1781@gmail

    Hi Babu,
    This is a printer problem.Try to adjust your printer settings.
    But any ways iam giving you a smartform document.
    go through these links and you will find all detials about smartforms.
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sapgenie.com/abap/smartforms.htm
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
    Thanks
    Vikranth

  • Check Form/Script - Alignment

    HI friends,
    Im working on Check script form whereas i find difficulties whiel printing the details in original cheque thru Dot matrix printer.
    The problem is, the name of the bearer (text) when printing in the row line is going differently on each document no. including the amount in words and figures.If is set for one document correctly,it may differ in another document.
    Pls advise, how i can set it correctly or it'll be better if i go by Smartform.
    The current calling program is script based one.if its good to go by Smartform,then if anyone having std program for Smartform print, pld post it on ur reply.(SAP ECC6.0 version)
    Pls reply.
    id :sankar1781@gmail
    thanks&regards
    sankar.
    sankar1781@gmail

    Hi Friend,
    If you are correcting alignment for text in one document through white spaces then it can be different in anotehr document.
    To fix the alignment use TAB of paragraph format. It will be fixed for different documents. Check the window size, enlarge it bit...
    Hope it will solve your problem.
    Regards
    Krishnendu

  • NEW FORUMS!!

    Hello All,
    We have today launched two additional forums for you. This will simplify and make it easier to access the information which would are looking for in a particular subject. We have also renamed the SAP Business One forum to SAP Business One Core and will begin moving relevant threads from this forum to the new forums in the coming weeks so please bear with us.
    I would like to ask you all to pay particular attention to which forum you will post your questions as now more than ever there will be people with a particular expertise only looking to that forum; for example, people with expertise on DTW will only be looking in the SAP Business One - SAP Add-ons forum and so on.
    I hope you will enjoy the new forums and that they will help you in your everyday tasks and activities. From SAP Business One Support side, we will continue to work on the forums to provide as many solutions to your questions as possible. Any feedback from the community is appreciated here.
    The forums will look and operate as follows:
    1. SAP Business One Core: This forum will deal with all matters related to AR/AP / Banking / Service / HR / MRP / Production / Financials / Sales opportunities. Existing content will be moved from this forum to the relevant forums in the coming weeks
    2. SAP Business One System Administration: This forum will deal with all matters related to the system setup / installation / upgrades / updates / connectiviry / performance / crashes / configuration / system landscape etc. Content from the current SAP Business One Core will be moved here in coming weeks to already give a base of threads.
    3. SAP Business One - SAP Add-ons: This forum will cover all SAP addons (Fixed Assets, Elster, Datev, Copy Express, DTW, Intrastat, Microsoft Outlook Integration, Format Definition, Bank Transaction Handling Facility, Payment Engine and Payment Engine - Cash & Bank) with the exception of XLR and Crystal Reports which will remain in the SAP Business One Reporting & Printing forum.
    4. SAP Business One Reporting & Printing: This forum will continue to cover all matters related to printing / PLD / XLR / Crystal Reports / Queries / Formatted searches etc
    Regards,
    Paul

    Thanks Paul for this Initiative.
    So much as it is a help due to the categorization of the forums by subject.  It might need a good amount of effort on the part of the moderators to make sure we have the right question in the right forums.
    I have seen that members post questions to the wrong forums and having them understand the value and their role in keeping this clean is important.
    Good luck
    Suda

Maybe you are looking for