10g - disconnected analytics - tables not found
hi, experts,
I installed disconnected analytics clients on a pc.
downloaded the sawd.dad, setup the app and synchronized.
I login the dashboard and then see this error.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S0002 code: -141 message: [Sybase][ODBC Driver][Adaptive Server Anywhere]Table 'TABLE_ABC' not found. [nQSError: 16014] SQL statement preparation failed. (HY000)
however, I fount the .csv files are downloaded in the folder C:\OracleBIData\sync
any missing steps?
I checked the database error message
Table ’%1’ not found
Item Value
SQLCODE -141
Constant SQLE_TABLE_NOT_FOUND
SQLSTATE 42W33
Sybase error code 2706
ODBC 2 State S0002
ODBC 3 State 42S02
Parameter 1 Name of the table that could not be found.
You misspelled the name of a table, or you did not qualify a table name with
a user name. For example, you might have referred to employee instead of
"DBA".employee,
what to do?
Similar Messages
-
Table not found after complete tablespace recovery
Hello Everyone, Table not found even after tablespace restored and recovered. Please loot at this if you got a minute.
SQL> conn reddy/reddy
Connected.
SQL> select table_name from user_tables where tablespace_name='REDDY';
TABLE_NAME
RECORDS
EMP
SQL> select * from emp;
ENAME E_NUM ESAL E_ID
jim 1001 40000 25
sam 1002 30000 27
kim 1003 35000 30
phil 1005 25000 37
sam 1006 32000 40
james 1009 43000 45
6 rows selected.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[oracle@RHELSRV ~]$ rman
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 4 21:05:37 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target/
connected to target database: ORCL (DBID=1314955841)
RMAN> backup tablespace reddy;
Starting backup at 04-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=115 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00008 name=/u01/app/oracle/oradata/orcl/reddy01.dbf
channel ORA_DISK_1: starting piece 1 at 04-JUL-12
channel ORA_DISK_1: finished piece 1 at 04-JUL-12
piece handle=/u01/app/oracle/flash_recovery_area/ORCL/backupset/2012_07_04/o1_mf_nnndf_TAG20120704T210605_7z8rq6pb_.bkp tag=TAG20120704T210605 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:07
Finished backup at 04-JUL-12
Starting Control File and SPFILE Autobackup at 04-JUL-12
piece handle=/u01/orabackup/c-1314955841-20120704-01 comment=NONE
Finished Control File and SPFILE Autobackup at 04-JUL-12
RMAN> exit
Recovery Manager complete.
[oracle@RHELSRV ~]$ expdp dumpfile=emp.dmp logfile=emp.log directory=dpump tables=emp
Export: Release 10.2.0.1.0 - Production on Wednesday, 04 July, 2012 21:07:21
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Username: reddy
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "REDDY"."SYS_EXPORT_TABLE_01": reddy/******** dumpfile=emp.dmp logfile=emp.log directory=dpump tables=emp
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
. . exported "REDDY"."EMP" 6.070 KB 6 rows
Master table "REDDY"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for REDDY.SYS_EXPORT_TABLE_01 is:
/u01/orabackup/emp.dmp
Job "REDDY"."SYS_EXPORT_TABLE_01" successfully completed at 21:08:07
[oracle@RHELSRV ~]$ sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jul 4 21:08:21 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: reddy
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> drop table emp;
Table dropped.
SQL> select table_name from user_tables where tablespace_name='REDDY';
TABLE_NAME
RECORDS
SQL> conn /as sysdba
Connected.
SQL> alter tablespace reddy offline;
Tablespace altered.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
[oracle@RHELSRV ~]$ rman
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 4 21:09:39 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> restore tablespace reddy;
Starting restore at 04-JUL-12
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 07/04/2012 21:09:56
RMAN-12010: automatic channel allocation initialization failed
RMAN-06171: not connected to target database
RMAN> connect target/
connected to target database: ORCL (DBID=1314955841)
RMAN> restore tablespace reddy;
Starting restore at 04-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=109 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00008 to /u01/app/oracle/oradata/orcl/reddy01.dbf
channel ORA_DISK_1: reading from backup piece /u01/app/oracle/flash_recovery_area/ORCL/backupset/2012_07_04/o1_mf_nnndf_TAG20120704T210605_7z8rq6pb_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/u01/app/oracle/flash_recovery_area/ORCL/backupset/2012_07_04/o1_mf_nnndf_TAG20120704T210605_7z8rq6pb_.bkp tag=TAG20120704T210605
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
Finished restore at 04-JUL-12
RMAN> recover tablespace reddy;
Starting recover at 04-JUL-12
using channel ORA_DISK_1
starting media recovery
media recovery complete, elapsed time: 00:00:01
Finished recover at 04-JUL-12
RMAN> exit
Recovery Manager complete.
[oracle@RHELSRV ~]$ sqlplus '/as sysdba'
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jul 4 21:10:42 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> alter tablespace reddy online;
Tablespace altered.
SQL> conn reddy/reddy
Connected.
SQL> select table_name from user_tables where tablespace_name='REDDY';
TABLE_NAME
RECORDS
Thanks in Advance!!!!Hi,
As you performed complete recovery you did see the table resotred. You can use TSPITR
recover tablespace reddy until time "to_date('04-JUL-2012 21:07:00','dd-mon-rrrr hh24:mi:ss')" auxiliary destination ''xxxxxx';
Read http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmtspit.htm#BRADV009
Anand -
Dump : Table not found in oracle database
Hi,
I am doing a program regarding analysis of tables belonging to archiving objects.In my program i am calling a RFC function module . 'DB02_ORA_TABLE_INDEX_ANALYSIS . But it is giving the dump for native sql statement .
--- Oracle block size ----------------------------------------------
exec sql.
select value from v$parameter where name like 'db_block_size%'
into :block_size
endexec.
Dump is table not found in database.
Could please let me know what setting i am missing...
Thanks in advance.....
SudhakarHi,
the view V$PARAMETER must be accessed through SAP/Oracle Database Monitor lets you view the active Oracle database parameters and the contents of the init.ora file.
Alternatively, you can use transaction st04. You need to apply SAP Note 706927 before using the database monitor.
Hope this information is help to you.
Regards,
José -
Table not found error while importing table defintion in PI 7.1?
Hi Guys,
I am trying to import the table structure from DB2 as an external defintion but i am getting the error table not found.
There are no connection issues with the DB2 and CC is good. Are there any additional settings i need to perform to import the table?
any help or suggestions would be really appreciated
Thanks,
SriniHi Srinivas,
I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
- Check that your Communication channel is activated and working fine.
- Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
Just check with all authorization.
I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
Thanks,
Bhupesh. -
Getting idoc error - Entry in outbound table not found- in outbound scenari
hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problemHi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas. -
"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16
While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple -
Viewing form in Preview Mode Failed. Error: Table not found [131-183]
Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
Johnhi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q -
Hi Guys,
Error - TABLLE NOT FOUND
We are working on discovery server which comes preconfigured from SAP.
I am able to work on the standard repositories like products available on this server for syndication and importing, but when I am trying to create the new repository I am getting the error TABLE NOT FOUND. Getting this error after entering the DBMS Server, Login Details and Repository Name and Port details.
Thanks,
MSHi colleagues
You should check follow:
- DBMS-user can connect to DBMS from your workstation(where you run SAP MDM Console)
- DBMS-user has premissions(grants) according to "installation guide".
- restart SAP MDM Server
- update DBMS Settings
- create new repository
Regards
Kanstantsin -
Entry in outbound table not found
i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
sender Port -
and partner abc02
in we20 is set up partner
abc01 type ls in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr message no 400 id E0
can anyone direct me to what i am doing wrong?????????????????/Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth -
Entry in inbound table not found
There is a typical problem here. R3 is recieving IDOCs from other (SRM) systems.
But the sender's(SRM) partner name is not there in R3. The present IDOCs are getting failed with status 56 and message " Entry in inbound table not found" Please help me out..Sending partner (number) is not there...so U cannot have partner profile..
-
Entry in outbound table not found, Error message no. EO400
I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shahHi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj -
Entry in outbound table not found E0 400
Hi all,
Can anyone please help me with the below error which i am facing in ALE IDOCS.
status 29: Entry in outbound table not found E0 400
I am unable to see my port name in the created IDOC and the basic type is incorrectly called.
may I know what settings need to be verified.
Thanks in advance.SAP checks the IDoc control record for outbound IDoc against EDP13 (outbound partner profile table). EDP13 is updated when you create outbound partner profile parameter in WE20
Check if you have created the partner profile outbound parameter in WE20 correctly to match your outbound IDoc control record.
SAP checks partner number, port, partner function of the receiver along with message type, message code and message function. They all should match between WE20 outbound partner profile parameter for your message type and the IDoc control record (EDIDC) segment.
This is the SAP code that throws the error message you mentioned
read table q_edidc index 1.
select single * from edp13
where rcvprn eq q_edidc-rcvprn
and rcvprt eq q_edidc-rcvprt
and rcvpfc eq q_edidc-rcvpfc
and mestyp eq q_edidc-mestyp
and mescod eq q_edidc-mescod
and mesfct eq q_edidc-mesfct
and test eq q_edidc-test.
if sy-subrc ne 0.
concatenate q_edidc-rcvprn '/' q_edidc-rcvprt '/' q_edidc-rcvpfc '/'
q_edidc-mestyp '/' q_edidc-mescod '/' q_edidc-mesfct '/'
q_edidc-test into text.
condense text no-gaps.
message a400(E0) with text(50).
endif. -
Entry in outbound table not found in PFAC
Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?Are you trying to do something related to IDOC/Partner profile related responsibilities?.
-
IDOC Error - Entry in outbound table not found - Status 37
Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
MichaelHi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika -
IDOC error : Entry in inbound table not found
Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
/XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks....
Maybe you are looking for
-
How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level, There is a requirement from my client and i propose two methode 1- Creation of Ztcode ZVL32N and do changes ABAP program level 2- Disablement vi
-
How to make a field mendatory input in ALV grid
Hi All, I am using CALL METHOD g_alv_grid_0200->set_table_for_first_display for diplay in an ALV Grid. I have made few fields in the ALV grid as EDITABLE. Now I want to make them as MENDATORY FOR INPUT. Can somebody please suggest me how can I do i
-
File Browse Upload Feature for Apex
Hi, I added the File Browse feature to my Apex page. However I would like to customize the file to be uploaded into a different database as a BLOB. Any examples? Thanks.
-
IOS6: Can't "send to" Dropbox or GoodReader anymore
In both my iPad 3 and my iPhone 4S, the upgrade to iOS6 now no longer offers non-Apple apps or the ability to choose any app when viewing a photo or PDF in apps such as mail, photo album, etc. Anyone else have this issue or see something I'm missing
-
Dear all, Actually , reversely enter the quantity of one material to 30 storage locations when initial entry of stock.(561) So thr r 30 material docs have to cancel & re entry. What is the t-code to cancel material docs in mass? or change the storage