10g EM cannot discover Application Server from Report Server

i have installed 10g EM on Linux AS 2.1. Everything is working fine. i want to modinot Application Server installed on remote server. I installed 10g EM NT agent on remote server. It is able to discover DB resided on that but Application server is not being discovred by Agent . Pls help

I don't know if 100% precise, but from your posts I understood that:
NO-IP keeps the domain "myuser.sytes.net" in relation to my (modem's?) dynamic IP.
The wireless router has (creates?) an internal net in relation to itself, and receiver computers are seen by the router with their internal IPs, say 192.168.1.xxx (192.168.1.100 and 192.168.1.101 in my case).
So I had to do port forwarding on the corresponding internal IP.
These are the steps I followed:
Accessed Router login Window by typing the IP Address of the Wireless router (by default, 192.168.1.1) on the address bar of web browser, and logged in to setup page.
Clicked on Security tab and turned off Firewall protection (my computer has its own -Windows- firewall).
Clicked on Applications and Gaming > Port range forward, and entered the details of the port I needed to forward
Application: JBoss (the name of my application -server-)
Start: 8080
End: 8080
Protocol: TPC
IP Address: 192.168.1.100 (my computer's internal IP address)
Enable: (checked the box)
And it worked!
Please correct me as necessary. As you can see, my understanding on nets is quite rudimentary.
Thanks a lot for your help.

Similar Messages

Oracle 10g - Creating a new Application Server using standalone OC4J 10g

I have some issues in creating a new app. server using standalone oc4j 10g 10.1.3 instance. After I created the app. server instance, I tested the connection and it says connection refused. I used the userid as oc4jadmin and the password as welcome. I am getting a message connection refused. For connection, I used the default hostname "localhost" and I didn't mention anything in the URL path.

Thanks Steve..
Here is what I am trying to do.. I want to create a new app server instance (i.e.) stand alone oc4j server, where I can deploy my web service and run a test.
Oracle JDeveloper 10g:
Under Connection Navigator, Application Server --
1) Right click to 'Create New Application Server Connection'
2) Connection type as 'Standalone OC4J 10 g 10.1.3',
3) Username ==> oc4jadmin, Password ==>welcome, checked the Deploy password.
4) Hostname: localhost RMI Port: 23791
URL path: <<blank>>
5) Test Connection ==> getting a error message...
Error while getting remote MBeanServer for url: ormi://localhost:23791/default:
Error reading application-client descriptor: Error communicating with server: Connection refused: connect; nested exception is:
javax.naming.CommunicationException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
Any input you can provide would be of great help.

Reports designed in 10g deploy in 9i Application server

Hi,
Is it possible to deploy reports designed in Reports 10.2.0.2 in a 9i Oracle application server?
Thanks,
Dipin

Hi Yasmin Sardar,
Pls. resize your form's canvas in Form Builder.
Good luck

Webutil configuration for jre, Forms 10g in windows 7 application server

hi all,
we are recently upgraded the application server with new os windows7. and clients ae also upgraded with windows7.
we are using forms 10g(developer suite 10g). and installed jre6 instead of jinitiator and did the all needful changes in formsweb.cfg. and ialready installed ofiice-2003(for excel)
but we are unable to run reports in excel format*. while we select the repotr type is exel in list item
and click ok button the following error is coming
oracle.forms.webutil.ole ole functions bean not found
client_ole2.create_obj will not work.
=====================
the following is the webutil configuration in formsweb.cfg
=====================
[webutil]
archive=frmall.jar,frmwebutil.jar,jacob.jar
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
#,f90all_jinit.jar
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
#baseHTML=webutiljpi.htm
lookAndFeel=Oracle
if any changes in the configuration and jre files.please mention it.
kindly help me how to resolve this problem
thank you
Edited by: vamsi on 3 Jan, 2012 12:59 AM
Edited by: vamsi on 3 Jan, 2012 1:21 AM
Edited by: vamsi on 3 Jan, 2012 1:21 AM

See my comments in this post:
java.lang.ClassNotFoundException: oracle.forms.webutil.ole.OleFunctions
and this one:
webutil.cfg for win-7 64 bit client

Cannot open application server file even if it exists...

Hello Experts,
I cannot open a file residing in one of the directories in the application server
using command OPEN DATASET. The file is there but OPEN DATASET gives me a value of 8
in SY-SUBRC. Any solutions for this?

ok .. basis need to give u the permission.
Before opening dataset check file authority with FM AUTHORITY_CHECK_DATASET
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
      EXPORTING
        activity         = 'WRITE'
        filename         = filename
      EXCEPTIONS
        no_authority     = 1
        activity_unknown = 2
        OTHERS           = 3.

Cannot Access Application Module from View Project (Swing)

I recently started a new application workspace as a Swing project with Business Components. Jdev created 2 projects by default, a Model and a View. The model works fine, all the business components are funtctioning and the DB connection is good. When i try to create a reference to the application module in my View project i constantly get 'Class Not Found' exceptions no matter what i do. I am using the jbo.client.Configuration.getRootApplicationModule('amName', 'amConfig') method.
What am i missing? How do i instantiate my application module from my View project?
Thanks a lot.

Just had to add the Model to the classpath...

HT4623 after updating, my i phone cannot discover network again from the simcard

i tried updating my iphone 3gs from 4.1 to 6.3.after updating .it started restoring my back up.the phone now asked to activate my iphone and it stoppped discovering network from the sim card hence i cannot restore my phone after the update.any help on how i can overcome this problem?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
More Tips here...
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.

Oracle Application Server 10g/Oracle Fusion Middleware 11g

Hi folks, This question related to migration/upgrade of Oracle Application Server infrastructure.
I see that the Oracle has come up with Oracle Fusion Middleware 11g. Is it the next release of Oracle Application Server 10g. I have the following questions. Appreciate if any one can provide answers to the following questions. Please correct me if my understanding of these oracle products is not right! Thanks
1. What is the future of Oracle Application Server?
2. Is it Oracle Fusion Middleware(OFM) 11g is the upgrade path if one need
to upgrade?
3. Is it expected that expected that customers need(if require) to move to OFM 11g?
4. Does OFM 10g comes with Oracle Application Server? If not what does
it comes with?
5. If it does not, what about customers having applications built using oracle forms and reports? Does OFG 11g
support Oracle forms and reports?
I understand that OFM 10g comes with Oracle web logic server!
Thanks in advance.
movva

To run Forms and Reports in Oracle Fusion Middleware 11g you have to use the distribution "Portal, Forms, Reports and Discoverer" in the FMW 11g software pack.
The structure of what we used to call "the application server" has changed a bit however, in the following way:
- In 11g you need to install the Javaserver WebLogic software (version 10.3.3 for the current Forms 11g version 11.1.1.3) first.
In 10g the installation of the Javaserver (OC4J) was part of the App server install.
Note that you just have to install the software, the configuration script for creating a Forms app server instance creates the WebLogic domain (comparable with the OC4J instance) for you.
- In 11g the Fusion Middleware software installation is separate from the creation of an application server instance.
This is more convenient and comparable to Oracle database and Weblogic installation.
- The Fusion Middleware Configuration script installs two parts of the product: 1. A WebLogic Domain. 2. A Fusion Middleware instance.
The first contains everything related to Java, such as the servlet configuration file (formsweb.cfg), while the latter contains everything that has less to do with the Javaserver
- No more Infrastructure server
The Infrastructure server does not exist anymore. If you want to use Single Sign On with Forms/Reports 11g you can install Identity Management 10.1.4.3 (or use Identity Management 11g, and configure separately the 10.1.4.3 Single Sign On) or keep your old 10g Infrastructure installation.
During installation you just have to specify you want to use OID and SSO and it configures out of the box.
Under normal circumstances the same licenses apply to 10g and 11g (as long as you do not use WebLogic for other purposes).

Problem in oracle application server 10g

hi all
i have problem with application server 10g
my situation :
oracle database 10g release 2
oracle application server 10g ( forms,reports)
and i installed the database and application server on the same computer , and with windows xp service pack 2 os
my problem is when i start the computer that connected to a network some services of application server not working , note that no problems with the database
and i installed node 32 antivirus
can any one help me plz ?

Wich processes don't start? do you have this services in Automatic?
Can you try to pass the to manual, and start the procs suing opmnctl command and check the logs of it?
Regards

Oracle Application Server 10g on Oracle VirtualBox

Dear All,
I recently almost completed learning OAS 10g, I know 10g is now a past. but it needs to learn various basics of 10g. like Infra, Web, Applications server, database server etc. All this I have learned on single machine with Quad 2 Core+8GB RAM+320 Hdd and 2.4Mhz processor.
Now, I want to install all four products(above) sepretly on Oracle Virtual Box Virtual Machines(VM). Can any one have this experience and share with me step by step and what configuration (like RAM,space etc) is needed on one VMs for each product. Thanks.

Hello! you can follow this link:
ORACLE-BASE - Oracle Application Server 10g Release 3 (10.1.3) Installation On RedHat Advanced Server and CentOS

How to export data from report to excel using report 10g

Hi,
usnig report 10g, can we export the data from report to excel.
Regards
Randhir

Hi,
have a look at metalink note 209770.1: Getting Reports Ouput to MS Excel - Techniques and References
Regards
Rainer

Oracle application server 10.1.3 not starting after crash

Hi, I've been struggling with starting up application server 10.1.3 on Windows XP Professional SP2 following a system crash (power outage). When we restarted the machine we noted that the database wasn't coming up because our redo logs were full. We backed up the database with RMAN (freeing the logs) and the database started without a problem.
We then tried to log into application server control from the website but were faced with a connection error. It is definitely the correct page as it was bookmarked on the server. I cannot start application server from the command line using opmnctl. Here is the output:
C:\product\10.1.3\OracleAS_1\opmn\bin>opmnctl status
Processes in Instance: appserv.MSRSFR
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
OC4J | home | N/A | Down
ASG | ASG | N/A | Down
C:\product\10.1.3\OracleAS_1\opmn\bin>echo %time%
11:32:13.78
C:\product\10.1.3\OracleAS_1\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
==================================================
opmn id=msrsfr:6200
0 of 1 processes started.
ias-instance id=appserv.MSRSFR
++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1339952132,pid=2136)
failed to start a managed process after the maximum retry limit
Log:
C:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
C:\product\10.1.3\OracleAS_1\opmn\bin>echo %time%
11:32:39.12
C:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
07/12/30 11:32:22 Start process
07/12/30 11:32:24 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Could not read connectors file at file:/C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: ./oc4j-connectors.xml
07/12/30 11:32:24 Fatal error: server exiting
07/12/30 11:32:26 Start process
07/12/30 11:32:28 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Could not read connectors file at file:/C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: ./oc4j-connectors.xml
07/12/30 11:32:28 Fatal error: server exiting
07/12/30 11:32:30 Start process
07/12/30 11:32:32 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Could not read connectors file at file:/C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: ./oc4j-connectors.xml
07/12/30 11:32:32 Fatal error: server exiting
C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: Notice the /'s versus standard windows \'s. The actual file is empty (contains only blank spaces).
I'm not sure where to go from here, I've tried stopping the oracle services manually and starting them up in various orders. We have the following services running:
Oracle-appservProcessManager Started
OracleDBConsoleTSTONE Started
OracleJobSchedulerTSTONE Disabled
OracleOraDb10g_home1iSQL*Plus Started
OracleOraDb10g_home1TNSListener Started
OracleServiceTSTONE Started
I'm sort of at a loss for where to go from here, help would be much appreciated!
Thanks,
Reza

Here you have it.
<?xml version="1.0" standalone='yes'?>
<oc4j-connectors xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNam
espaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/oc4j-connectors-10
_0.xsd" schema-major-version="10" schema-minor-version="0" >
<connector name="datasources" path="datasources.rar">
</connector>
<connector name="OracleASjms" path="OracleASjms.rar">
<config-property name="lookupMethod" value="resourceProvider"/>
<config-property name="resourceProviderName" value="oc4jjms"/>
<adminobject-config location="OracleASjms/Queues">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tQueueImpl</adminobject-class>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
<adminobject-config location="OracleASjms/MyQueue1">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tQueueImpl</adminobject-class>
<config-property name="jndiName" value="jms/demoQueue"/>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
<adminobject-config location="OracleASjms/Topics">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tTopicImpl</adminobject-class>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
<adminobject-config location="OracleASjms/MyTopic1">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tTopicImpl</adminobject-class>
<config-property name="jndiName" value="jms/demoTopic"/>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
</connector>
</oc4j-connectors>

Database in application server

What's the difference between the application server's built in database and Oracle database 10g.
If I am going to install everything on one machine, do I have to install Oracle database 10g or just the application server will be fine as it already contains the database.
Thanks.

The metadata repository is part of the infrastructure installation with an application server. If you are not going to have a database base identity management or are not goign to have identity management, then do not install the repository. You can have a file based repository also. You can install the regular 10g database and then run the metadata repository creation assistant to in a sense create a repository and still be able to have the functionality of the 10g database.
But I guess the short answer would be, it depends on what you are going to do with this system and what options do you want?

Migrating Oracle forms and reports from 6i to 10g Application server on Uni

HI Guys,
We are migrating from Oracle forms and reports 6i to 10g.
We will be having application server on Unix box.
I understand following will be the changes i will have to do in this respect -
1. Fonts are to be revisited only Java fonts are supported.
2. Obsolete items, function calls, triggers are to be removed.
My question is since this application can be cross platform application,
Can anyone provide me with changes that I will have to do with configuration files like -
1. Formsweb.cfg,
2. forms.conf
3. default.env
4. registry.dat
Keeping in mind that the application server will be on unix box.
Thanks,
Av.

Java fonts are only supported for the Forms version.
You can use your own fonts for Reports however, there is some legwork to do this. I know because I just went through it.
If you will only being using the PDF output (which for me replaced the Preview mode that existed in 6i), then you have to install the TTF for the missing font, an AFM (use the ttf2pt1 utility to generate the AFM file, but make sure you remove the AFM extension when moving it to Unix). You'll want to use the PDF Subset in the uifont.ali (which exists under the ORACLE_HOME/guicommon/tk/admin directory and add the line underneath the PDF Subset "Font Family Name"="TTF Font Name" The font family name is found when you open the AFM file in textpad or wordpad for the font you generated. This is what you enter. The TTF Font Name is the name the TTF font. You'll have to restart Reports Server after this.
If printing to the printer directly is an option you must have, I will tell you it does not work in Linux right now. You can print to the printer but if the font doesn't exist on the internal memory of the printer, it won't work. There are 3rd party utilities like ORARRP and PDFPrint that can take care of this but, each has its own limitations. The one thing I found with ORARRP is if you generate a Report with an RRPA file extension and open it on Windows, it works great, the printer dialog comes up asking you what printer you want to print too. However, if you call this in Linux/Unix with the filename, it brings it up in the web browser but doesn't prompt you for your printer to print too automatically. So, for me, it's a show stopper. My only other option is to install the fonts on the printer that are missing.
As for the files you want to change, you'll obviously have to make changes to the formsweb.cfg, default.env, forms.conf. I have to modify the reports.sh for some PL/SQL attached libraries to make sure it picks them up. I did have to modify Registry.dat.
There is alot of work but mainly forms wasn't too bad, unless you had fonts that weren't supported. Usually there is another font that you can use to replace the old one but you have to know which fonts exists on the server and try all the keys on the keyboard to find the corresponding keystroke.
Hope this helps.
Chris

Reports run in LAN but not in WAN from Oracle Application Server 10g R2

Hi,
I am using Microsoft(R) Windows(R) Server 2003, Standard Edition (Version 5.2.3790 Build 3790) & Oracle Application Server 10g Release 2 (10.1.2).
I run my forms and reports in Oracle Application Server 10g Release 2 (10.1.2) successfully in client server environment. But when I run my application in WAN (our private network between different cities) then forms are run successfully but reports does not run.
i am calling reports from Forms using following code.
PROCEDURE PRINT_REP_WEB IS
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('REPORT183');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'C:\cheema\qdir_store\reports\pmms\backlog_jobtype.RDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'PDF');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_pap_10gasmid');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_pap_10gasmid') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_pap_10gasmid';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;
when clients in WAN press the reports button from Form there is a message "Page can not be displayed" appear.
How can I run my reports in WAN, please suggest me solution.

This sounds like a configuration issue. Are there different firewall rules that are enforced on WAN connections versus LAN connections?
Hope this helps.
Craig...

10g EM cannot discover Application Server from Report Server

Similar Messages

Maybe you are looking for