10g Forms and reports standalone - 64 bit software available?

Hi All,
Is oracle application server 10g forms and reports standalone softaware available in 64-bit version?
Please provide the link to download thye same.
Thanks,
Anand.

1GB of RAM seems to work better. I just upgraded to 1GB from 512MB on a new ThinkPad running XP, 10g release 2 database, and 10.1.2 Application Server (Forms and Reports version). When I had 512, something broke and I wound up resetting the factory defaults using the IBM recovery tool. When I added the extra memory, everything went well. On the other hand, a four-year-old Dell desktop with 512MB works okay. Whatever.

Similar Messages

Clustering of Oracle 10gAS (Forms and Reports Standalone edition)

Hi,
Does anyone have experience of clustering of Forms\Reports in 10g environement with Forms and Reports Standalone edition?
Clustering at Application Server level?
Clustering at hardware level (load balancing \SAN for code storage)?
Clustering at OS level (MS Clustering)?
I am interested to know about others experiences\thoughts.
John

Since 10g Version (904) you can only cluster the infra (Cold Failover Cluster and Active Failover Cluster), the HA for Forms and Reports is only by frontending with a Loadbalancer, and I'll sugesst not to use WebCache as this frontend because forms get a lot of problems.
Regards.

Oracle Application Server 10g Forms and Reports Services

Hi there,
I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
Oracle Application Server 10g Release 2 (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
or
Oracle Developer Suite 10g (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
Faoilean.

You might find better assistance in the APplication Server forum - Oracle Application Server - General

Installing Oracle 10g Forms and Reports in Cluster Mode

Dear All,
My OS version is RHEL 4
In our current setup we have oracle 10g database two node cluster and Application Server 10g to node cluster.
Currently our report server has been configured to run in standalone mode
I have been asked to configure oracle 10g forms and report server in cluster mode.
Please provide me with the documentation link to configure oracle 10g reports server in cluster mode.
Thanks and Regards
Monoj Das

my main goal is load balancing only
Then what I've done in 2007 might be what you need. In that thread there is a link to Web Cache Administrator's Guide : there you'll find everything you need to configure the web cache as a load balancer, particularly chapter 8 Setup and Configuration.
Anyway, here briefly some configurations : we have two machines, say MachineA and MachineB. The DNS resolves MachineA to a virtual address, which is normally assigned to MachineA; if MachineA crashes, it gets assigned to MachineB.
Users URL looks like this : http://MachineA:<port>/forms/frmservlet?config=<some config>
MachineA's web cache distributes connection requests between MachineA and MachineB.
Of course we're now using 11g as well, but that's another thing.

10g Forms and Reports Stand-Alone Install for Demo Purposes

Hi,
My boss asked me to set-up an Oracle 9i (9.2.0.0) database and OracleAS 10g (9.0.4) Forms and Reports standalone on a laptop she wants to use to demonstrate our Forms and Reports application for a potential customer.
The laptop is P4 with 512MB RAM, running Windows 2K Pro.
Has anyone tried this before? Any suggestions appreciated.
TIA,
Jim

1GB of RAM seems to work better. I just upgraded to 1GB from 512MB on a new ThinkPad running XP, 10g release 2 database, and 10.1.2 Application Server (Forms and Reports version). When I had 512, something broke and I wound up resetting the factory defaults using the IBM recovery tool. When I added the extra memory, everything went well. On the other hand, a four-year-old Dell desktop with 512MB works okay. Whatever.

Deploy 10g forms and reports in Oracle 11g

Hi, I'm working in 10g forms and reports development. However, in my company want to migrate to Oracle 11g.
My doubt is: May I deploy 10g forms and reports in Oracle 11g installation (Weblogis server + Oracle Fusion Middleware)?
Thanks.

I downloaded developer suite.does this developer suite includes 10g database also.becoz there are two disks for the developer suite whereas there was only one disk for oracle 10g datbase that i downloaded earlier and installed.if this developer suite includes database,reports and forms then do i need to uninstall the previous data base 10g that i installed.please help me regarding this.
thanking you all

Is 10g Forms and Reports with E-Business Suite 11.5.10.2?

Hi Experts,
I want to know,
10g forms and reports is certified with Apps 11.5.10.2?
Thanks
R.Sundaravel

Hi,
Anchorage.India wrote:
Hi Sundaravel,
10g forms and reports is certified with Apps 11.5.10.2?Yes it is.
You can refer the following ML doc,
[Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233436.1]
Thanks,
Anchorage :)It is not.
Regards,
Hussein

How to install 10g Forms and reports in Unix

Hi All,
How to install 10g Forms and reports in Unix, do we need to install 10g AS then desktop forms and reports, Any metalink documents for reference .
Thanks

Is it really so hard for you to find the installation guide?
http://download.oracle.com/docs/cd/B25016_08//doc/dl/core/B16012_04/toc.htm
For the Developer Suite you don't need the App Server. You need the App Server for production.
Edited by: InoL on Jul 19, 2010 1:22 PM

URL Problem Oracle 10g Forms and Reports

Hello Room,
As this question is related to forms and reports both, I have posted it here. I have a system which needs to be deployed in Local Lan Network and also the same Local Lan user should be able to access the same application via internet. In Addition there are also suppliers, customers who dosen't have oracle installed but will be accessing forms and reports via the url through internet which will be a natted url to our public IP. I have loaded Oracle 11g on windows 7 and all my network clients are on windows 7. I have not loaded forms and reports 10g on server, but only database 11g is installed on server. My problem is listed in points below:-
1. Do I need to install forms and reports on server to achieve the above scenario ? or the local network installation of forms and reports on all client PC's will do ?
2. To start OC4J instance, shall i start it only on server through batch file while booting server, or it needs to be started on all client PC's to start work from client end ?
3. When i run forms from my client PC I get local url http://127.0.0.1/ to reach forms servlet which end up in http://localpc/.... from cookie redirect, whether this needs to be http://server/...... on all client PC's to reach the forms servlet ?
4. If I have to start url http://server/ instead of http://127.0.0.1/... automatically while running every form to reach forms servlet, how to achieve this ?
5. There are reports to be run from forms and parameters needs to be passed in reports from forms 10g. So in web.show_document shall i refer to absolute url for local acccess or http://server url as the same user can go to internet to access the data. ?
6. if I load forms and reports 10g on server, do I need to install forms and reports on client end seperately to gain access in local network ?
7. My forms and reports folders are located on server which are shared for access.
8. What will be the scenario in case of suppliers and customers who does not have anything installed on their PC and will access forms and reports through internet ?
I want to minimize my work. Please suggest me how to proceed about accessing forms, passing url from forms to reports in web.show_document, and Internet access url ?
Your help is highly appreciated. Thank you in advance.

I have tried to explain you in decent way several times that I am not lazy and there are reasons that I do not want to read pdf, because I have already read that all ! In the future please do not respond to my thread. I am not asking for your personal time. If you do not understand my efforts. Just ignore it. I have read all the white papers of Oracle and give me your email id, I will send you all the code which I have read or downloaded. You should know that the knowledge diminish as the technology change. And that does not mean every user in the forum is stupid and as wise as you are. I repeat to state that I have 15 years of experience in Oracle forms 6i._ including Oracle 7,8,9i. This is the first time I am ever visiting oracle forums since past several years. I was the first person to use oracle 7 in my city where people were not knowing what oracle is. At that time I was knowing that the password for scott is tiger which even the reputed institutes in my city was not knowing. at that time I was also knowing that one of the person from oracle made a mistake in indexing the rowid. I think this should be enough to you for now.

Oracle 10g Forms and Reports documentation

Hi,
I need link to oracle docs for forms and reports 10g.
Looked around at the following link but could not find docs apart from "Release Notes"
http://www.oracle.com/technetwork/developer-tools/forms/documentation/10g-forms-091309.html
Since, i have just started working on Forms and reports and have no prior exp. in them, so i wanted link to the whole docs for the forms and reports and not just release notes.
can anyone please provide link to the docs.
thanks

Hello,
Welcome to OTN
*Before posting on this forum please read*
Check this link.
1. http://www.oracle.com/technetwork/developer-tools/forms/documentation/index.html
2. http://www.oracle.com/technetwork/middleware/reports/documentation/index.html
If someone response is helpful or correct, please mark it accordingly.

How to run Net Configuration Assistant on 10g Forms and Reports server

I have a Windows 2000 server with Forms and Reports Services installed from AS 10g v. 9.0.4 (just the Forms and Reports install). According to the OUI, Net Configuration Assistant 9.0.4 is also installed. However I cannot figure out how to run the Net CA. There is no shorcut that I can find. Can anyone help?

Thanks for the reply Frank. I have looked all through the Start menu but see no "Configuration and Migration". I assume it's because I only installed the Forms and Reports option, so I only have Forms Services, Reports Services, and the Universal Installer. No big deal - I've already setup tnsnames manually. I just like to use the Net Assistant when I can.

10g forms and reports services

hi,
one of our small scale customer is asking for the program in 10g forms. the requirement is only to run forms and reprot against the database, (no signle sign on, internet dir etc). the question is
1.) do he require forms & reports services to run the forms ? (stand alone or something like that). Ff Yes is it possible to purchase that alone. without other AS components..?
thanks in Adv.
Kris

Hi Kris,
My understanding is that you will require Forms and Reports services to enable your client to run the application from a server. These can be purchased seperately up to 10g R2 - but I'm not sure about the latest versions...
Regards,
Buzzer

Government CAC (Smart Cards) interface to Oracle 10g Forms and Reports

Am working an Oracle Forms and Oracle Reports (10g) WEB applications for an Air Force customer. They are wanting to use Smart Cards (CAC) to log onto their PCs and do not want to have to enter logon and passsword to enter my Oracle WEB appliaction.
Has anyone or does anyone know of a government customer that has an Oracle forms and reports application that does not require a login and password, but uses the CAC card information to connect? If so can you please provide name of organization and contact information. thanks [email protected]

Hi,
I have been researching a CAC card solution for a DOD customer.
We plan (hope) to authenticate users against their Active Directory accounts using Oracle Internet Directory and Single Sign-on Server. Active directory reads the CAC card, and Oracle verifies they are authenticated in Active Directory.
Oracle Windows Native Authentication (WNA) may be what you're looking for.
Here's an OBE on enabling WNA:
http://www.oracle.com/technology/obe/obe_as_10g/im/wna/wna.htm
Chapter 43 of the Oracle Internet Directory (9.0.4) guide discusses integration with Windows Active Directory:
http://download-east.oracle.com/docs/cd/B10464_05/manage.904/b12118/odip_act.htm#127412
If you haven't already done it, search these forums for "CAC". You'll find other posts from people who have implemented CAC authentication in their Oracle products.
Good luck!
Jim

AS 10g forms and reports services install

I only have Developer 9.0.2 loaded. I want to load AS10g Forms and Report Services but I'm not sure how this relates to my old instance of Developer. Should I reuse the Oracle Home of the 9.0.2 Developer instance for the new install or do I need to create a new Oracle Home? I noticed in the OUI that a "complete" Installation Type will also load Developer. Does this mean I should be doing an upgrade rather than an install? Do I need to just trash the 9.0.2 instance and start anew?
Thanks, Chris

Chris,
I suggest to install into a complete new Oracle Home. If you mix two installs you end up with unpredictable behaviours, if not in Forms then possibly in otehr components. Note that this mustn't be the case, but better is.
Frank

OAS 10G Forms and Reports Forms - Removing old sessions

I am currently running Oracle Application Server 10.1.2.0.2 Forms and Reports Services Install.The problem that I am experiencing is that some users don't log out of our application and after 8 hours of inactivity our DB logs the users out of Oracle. This leaves forms sessions attached to the application server. Is there a way that I can remove these connections without having to manually log into Enterprise manager and disconnect them? I was hoping to be able to run a script at night and disconnect all sessions that have been connected for x number of hours or better yet find an option that I can configure in my forms setup to limit connect_time to a certain length of time. Any suggestions would be appreciated.

Have you modfied the timeout parameter ? This will help to exit the application when there is no activity
Rajesh

10g Forms and reports standalone - 64 bit software available?

Similar Messages

Maybe you are looking for