10g grid control installation (hanging problem) on RHEL AS 4.0

Iam trying to install enterprise manager 10g(10.2.0.1.0) grid control on RHEL AS 4.0. At a stage after specifying security options the OUI hangs for long time (for about 15 mins) then it works fine till 100% installation then hanged for all day which i nevar see - (execute configuration scripts step). After a huge frustration i stopped the installation. Did anyone has come across this kind of problem..can anyone help me out of this problem...thanks in advance..
The last few lines from logfile shows:
*** End of Installation Page***
The installation of Oracle Enterprise Manager Repository Database was successful.
INFO: Path To 'globalcontext.xml' = /u01/app/oracle/product/10.2.0/db10g/install/chainedInstall/globalcontext

Please paste the install action log and config log

Similar Messages

Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0

I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
Raj

Actually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink.

Configuration Assistant failed during OEM 10g Grid control installation

Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

10g Grid Control Installation/configuration on RAC

Hi Experts,
I am new to RAC and I need your help.
I need to configure 2 node RAC and install/configure Oracle 10g Grid control (High Availability) on HP-UX Itanium servers. Is there any good document or link?
Thank You all in advance
Bell

Hi Bell,
Here is the link for the 10gR5 Grid Control Installation Guide: http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm
Considering the GC repository is a RAC database you will be performing the "+Using an Existing Database+" installation type.
I would highlight the below part of the documentation:
To view a list of certified Oracle Database, see Document ID 412431.1 on My Oracle Support (formerly Metalink).
If you want to use a RAC database, which is configured on a virtual host, as the existing database, then refer to Document ID 561441.1 on My Oracle Support (formerly Metalink).
HTH,
Regards,
Jozsef
Edited by: Jozsef on Oct 22, 2010 12:14 AM

10g Grid Control Installation/Configuration

I want to install and configure the 10g grid control agent in our environment.
Is there any step by step document for installation and configuration.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

Grid Control installation hangs at 100%

I am trying to install GC for the first time. I am at "Install" screen at 100% and "Configuration Pending" ... hanging since yesterday. Except Help button all other are disabled (grayed out).
Idea?
Oracle Linux 4.8 x86

Here is link to the picture.
[http://i890.photobucket.com/albums/ac106/mishomor/errors/100percent_error.jpg]
Last few lines of log as well.
INFO: cf session retrieved for key: db10g oracle.sysman.top.em_seed
INFO: Created a new file /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands
INFO: Since the option is to overwrite the existing /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands file, backing it up
INFO: The backed up file name is /u01/oracle/OracleHomes/db10g/cfgtoollogs/configToolAllCommands.bak
INFO: ca page to be shown: false
INFO: exitonly tools to be excuted passed: 0
INFO:
*** End of Installation Page***
The installation of Oracle Enterprise Manager Repository Database was successful.
INFO: Path To 'globalcontext.xml' = /u01/oracle/OracleHomes/db10g/install/chainedInstall/globalcontext

Are there any documentation for EM 10g Grid Control installation on Solaris

Any kind of documentation? Please send me the link:
[email protected]
Thanks

Hi ,
here is the link:
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b25949/toc.htm
Regards,
Simon

OEM 10g Grid Control Problem

Hi,
We installed the OEM 10g Grid Control in Serparate Host..
Installed 10.2.0.1 grid control
and patched upto 10.2.0.3 for OMS....
here OMS version is 10.2.0.3
grid Control Agent Version is 10.2.0.3
and Repository Home is 10.2.0.1
Installed the linux Grid control agent 10.2.0.3 in target database...installation was successfull....but Target database is not showing in the grid control ..what was the problem...

where to check the log files in target database host..do u mean that...
i installed agent on target database home in a seperate directory...
ORACLE_HOME is the Target Database Oracle Home
cd $ORACLE_HOME/agent10g/sysman/log/
is it the correct directory to check the log files..i am new to this grid control...
=========================================================
$cat emagent.trc
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:08 Thread-5980167 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:18 Thread-65541 ERROR command: nmejcn: received no status header from repository at http://gridserver.abc.com:4889/em/upload/
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:42 Thread-6406151 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
================================================
$ cat emctl.log
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: Processing start agent
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: EMHOME is /u02/targetdb/10.2.0/agent10g
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm:status agent returned with retCode=1
15709 :: Sun Aug 19 11:42:36 2007::AgentLifeCycle.pm: Exited loop with retCode=3
16405 :: Sun Aug 19 11:48:23 2007::AgentLifeCycle.pm: Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:emdctl status returned 3
19862 :: Sun Aug 19 12:02:42 2007::AgentLifeCycle.pm: Processing status agent
19862 :: Sun Aug 19 12:02:42 2007::AgentStatus.pm:Processing status agent
19862 :: Sun Aug 19 12:02:43 2007::AgentStatus.pm:emdctl status returned 3
20326 :: Sun Aug 19 12:04:05 2007::AgentLifeCycle.pm: Processing status agent
20326 :: Sun Aug 19 12:04:05 2007::AgentStatus.pm:Processing status agent
20326 :: Sun Aug 19 12:04:06 2007::AgentStatus.pm:emdctl status returned 3
20404 :: Sun Aug 19 12:05:41 2007::AgentLifeCycle.pm: Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:emdctl status returned 3
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:Processing upload
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:emdctl status agent returned 3
21329 :: Sun Aug 19 12:16:38 2007::AgentStatus.pm: emdctl upload returned with exit code 6
21685 :: Sun Aug 19 12:22:59 2007::AgentLifeCycle.pm: Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:emdctl status returned 3
22464 :: Sun Aug 19 12:40:17 2007::AgentLifeCycle.pm: Processing status agent
22464 :: Sun Aug 19 12:40:17 2007::AgentStatus.pm:Processing status agent
22464 :: Sun Aug 19 12:40:18 2007::AgentStatus.pm:emdctl status returned 3

Error while installing Oracle 10G Grid control in RHEL

I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
Anjan

I saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas

10g R2 Grid Control Installation

Hi,
I want to go for 10g R2 Grid Control Installation...
I have setup like this
Software:
Oracle 10g R2 Grid Controller
Oracle 10g R3 patchset
Hardware:
Small PC with 2 GB RAM and 80 GB HDD
Target Nodes:
Oracle Applications Database Tier Node with 10g Database
Oracle Applications Tier Node
Oracle 9i Database standaalone
==========================
I want to install the 10gR2 Grid control on the SMALL PC on Linux...
I will Apply the Patchset 10g R3 on top it...
Then I want to install the OEM Grid Control Agent in Target Nodes...Where can I get this software...Please sched some light on this

Hi,
Cannot we install 10gR2 Grid Control on Existing
Target Database Server in a seperate Oracle Home with
a seperate user for installation..It is adviceable to use the same oracle user in a different Oracle Home.

Grid Control installation for 11G: is 10g grid required ?

Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.

user6116850 wrote:
Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.Upgrade Grid Control to 10.2.0.5. Grid Control is an independent product and will not follow the same numbering as Database and App Server/Fusion.
It will provide a lot of extra pages and tabs anyway. And it will format and present the information for Oracle 11g properly to work in it's pages.
Try it and see.
and ask Grid Control questions in the Grid Control forum for better Grid Control answers.

Error - when creating a standby database with EM 10g Grid Control

Hi,
I am experiencing some problems when I want to create through the EM 10g Grid Control a standby database from a allready existing db. At step 2 when the files should be generated and copied to the other system, I am always getting the error that there isn't enough disk space on the other system. This can't be because there is at least 30GB free and the installer is asking for less than 1GB. I was searching the whole internet for a solution to this issue, but there was just nothing that could help me out with that point...
Has someone an idea at this point? Thanks for helping...
I am working on a Windows 2003 Server - Enterprise Edition for every system (Grid Control, Primary DB and Standby DB).
Best regards,
Patrick.

Check that filesystem space using GC under targets>hosts on which you are trying to create standby. Do you have any specific error message from GC ? If GC shows proper size under host filesystem section then there shuld be no such problem. Double chk ur locations too.
Regards,
http://askyogesh.com

OEM 10g grid control using an existing database

Hello all,
Has anyone been successful in installing Enterprise Manager 10g Grid
Control (10.1.0.3) using and existing 10g (10.1.0.3) database?
10g grid control comes with 9.0.5.0 database for it repository. Since
this respository can not be update to 10.1.0.3, Oracle recommends using
and existing 10g database instead.
My installation goes 90% all the way before it fails. It fails at the
create repository point.
If any one has been successful, could you please share your success
with me.
Thanks,
Jake

Well, finally I did it! :)
The problem comes when you are trying to install OEM repository into existing 10g DB which used to be configured with a standalone Database Control. Dropping SYSMAN user is not enough!!! There are some leftovers which must be cleaned before running repository creation assistant:
drop user SYSMAN cascade;
drop user MGMT_VIEW cascade;
drop role MGMT_USER;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
That's all folks.

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

Install EM 10g Grid Control on Solaris 10 x86

Hi all
I need to install Enterprise Manager 10g Grid Control Release 2 on Solaris 10 x86 platform.
I found out the following link where I can download the software:
http://www.oracle.com/technology/software/products/oem/index.html
Howerver it seems that there isn't any download for my platform. Does anybody know where can I find the software?
How can I configure EM Grid Control on that platform if I don't have the software. Does anybody know a manual installation and configuration method?
King regard and thank you
Aron

That means it is not yet available for 10.2, but it is for 10.1

10g grid control installation (hanging problem) on RHEL AS 4.0

Similar Messages

Maybe you are looking for