10g install on (DHCP based) rhel5 -issue with DHCP

Hello, I am trying to install Oracle 10.2 on my laptop (RHEL5) which is DHCP configured.
In Windows system, it can be resolved by Installing a Loopback Adapter. How to resolve this in RHEL?
Thanks in advance,
Lily

Hand edit .ora files and replace IP address with machine name or 127.0.0.1.
This is also the easiest solution for Windows too.

Similar Messages

Maverick install no go - now have issues with 10.6.8

Mavericks failed to install, I assume based on subsequent info I read, due to having a partition for Parallels. Macbook then reverted to 10.6.8.
The reason I wanted to update was so I could install Compressor in association with Final Cut Pro.
Now when running FCP or VLC and selecting a button to do an action such as saving a master file out of FCP, the program just halts and the computer login screen pops up.
Is it possible that the failed install has left behind some residual memory issues?
Anyway to clean out files that may have installed but not deleted when the update failed?
Is this Apples way of telling me I need to buy a new laptop?

dnorth12,
do you have a backup of your system from before your attempted installation of Mavericks?
It could be Apple’s way of telling you to use Time Machine.

Installing the HCA Solution Accelerator - issue with SNC Deploy

Hello Everyone -
I am trying to install the HCA Solution Accelerator, and I am having an issue with the "ant deploy" of the Selection and Capture building block.
I have configured the ~snc_1_0\install\ant.properties file, but I think I may have missed a setting somewhere because I am getting this build error:
BUILD FAILED
C:\Adobe\SolutionAccelerators\human-capital-application.1.0\sa\building_blocks\snc_1_0\ins tall\build.xml:113: The following error occurred while executing this line:
C:\Adobe\SolutionAccelerators\human-capital-application.1.0\sa\building_blocks\snc_1_0\dep loyer\build.xml:107: The following error occurred while executing this line:
C:\Adobe\SolutionAccelerators\human-capital-application.1.0\sa\building_blocks\snc_1_0\dep loyer\build.xml:91: Java returned: 1
Does anyone know off-hand what would cause this particular error?
I am relatively confident in the path information that I have set for the j2eejar, junit.jar, lcsdk, lc.install.dir as well as the database driver and connection settings.
I am using a simple turnkey LiveCycle install on a Windows XP OS.
Any suggestions?
Thank you in advance,
Ben Lyons
*I have attached the entire Build output from the command line as a text attachment in case anyone is interested

Well, I found a "fix" to this issue - I am just going to post it here in case anyone else encouters a similar issue.
Apparently, it relates to some sort of error in build.xml file in the ~\snc_1_0\deployer folder.
The particular line that was causing the build to fail was line 91 of this file, which looks like this:
<target name="data-purge">
Line 91 -->            <java classname="com.adobe.solutions.snc.utils.DatabaseExporter" failonerror="false" fork="true"
classpathref="hibernate.setup.path">
                                                <jvmarg value="-Dhibernate.bytecode.provider=javassist"/>
                                    <arg line="create-drop ${dist.dir}/hibernate-test.cfg.xml ${database.driver.class} ${database.connection.url} ${database.username} ${database.password}"/>
                                </java>
                </target>
The "failonerror" attribute is by default set to "true", thus an error was occurring, so the build was set to fail. I changed this to false so that I could build this building block, but doing so has filled me with trepidation that something isn't going to be writing to my database correctly.
Does anyone know what a failure in this segment of this build.xml file means as far as the built SNC building block? (Remember this is the build.xml file in the deployer folder and not the install folder).
In other words - does this mean I should be expecting some kind of lingering error in this building block - and if so, what would that issue most likely be so that I can keep an eye out for it?
-Ben

Installing JRE on RHE 3 - Issues with JRE Path

Hello,
First of all, I am very new to linux (I normally have server admins but since it's weekend it looks very bad)
I have installed j2sdk1.4.2 today but it seems like something went really wrong as we cannot locate jre.
I have installed a chat server which has a startup file containing:
#!/bin/sh
jre -ms8m -mx128m -classpath $CLASSPATH:NetDiveServer.jar NetDiveServer port=2112 httpPort=2113 config=.
After running it I simply get the message
jre: command not found
Maybe somebody could point me to some site where oath setups are explained very well since I am very new to this. I believe it is all about setting up paths so maybe somebody could help out there.
Thanks

Thanks for your qucik reply. If I can get JRE and Jedit working on my jumpdrive, it will be great and save me a lot of time. I am a new user so I might be asking some obvious questions here.
My question is : What is the difference between integrating JRE with IE and JRE with Jedit? If I run JRE as a stand alone program then will Jedit link to the JRE properly? Anyone care to comment on what the standard installation program does to provide the integration? I guess it is more than just copying files.
What happens if there is another JRE running already? maybe the same or different version of JRE as the one on my jump drive.
Thanks for your help.
Ken.

Installed Lion, any known compatibity issue with Adobe CS4

So far so good, everything seems OK but was concerned with Photoshop CS4 as I had heard maybe some issues, anyone had any good/bad experiences?

it appears as though their may be some issues. Read what Adobe has to say :http://blogs.adobe.com/crawlspace/2011/07/photoshop-and-lightroom-compatibility- with-mac-os-x-10-7-lion.html Hope this helps

USB drive issues with Maverick

Good day Apple friends,
Since I installed Maverick I have numerous issues with my Macbook Pro-Retina mid 2012.
When I connect my usual USB drives they don't react the first time. I always have to deconnect and immediately reconnect to make it work.
It is not a question of delay, it is a question of 1st or 2nd time. I basically go: connect, disconnect, reconnect and voilà!
It happens with many 2-4-8 GB USB sticks which were fine before Maverick. It does NOT happen with SD cards though.
Why?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Issues with Infoview data refresh on Crystal Reports based on BW BeX query

Hi all,
We applied the Business Objects XI3.1 fix pack 3.1 with Integration toolkit fix pack 3.1 in our environment.
After that we started having trouble with Crystal Reports based on BeX queries that use manual input variables.
The data refresh would not work in Infoview.
The data refresh would work using the Crystal Reports designer gui on local machine.
regards,
Abhishek

Hi all,
This thread is for the benefit of all the BW/BO people who faced issues with BO reports not working after certain fix pack installations.
After lot of time spent in debugging this and researching and some help from SAP, we found that BASIS had missed a step in the BO patching. This step was relating to applying some BW transports in the BW system related to the new Integration toolkit.
Please use below notes for the BW transport task of patching BOE Integration toolkit.
Refer to Note#1472104 which explains about loading the
transports when we install BO Service Packs or Fix Packs. Also please refer to the Note#1271751 for the advice on transports for BW systems.
Please go through page 206 (Configuring transports) in the SAP Integration Kit installation guide. You can download this document at below link.
https://websmp106.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
Refer to Note#1345919 which explains about the process of loading transports for SAP IK.
regards,
Abhishek

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

[SOLVED]Some issues with fresh arch install.

I freshly installed arch after a pretty long period of time of using other distributions and forgot how many issues I have to deal with when using it.
Alsamixer does not detect my headphones when i plug them in...(does not mute / unmute automatically speakers / headphones)
And another issue with the xorg server i think, I have a notebook and after every reboot i have to look up after touchpad with xinput --list then --setprop <id>. How can I make it permanent? It's annoying.
Last edited by dede24ever (2014-12-27 22:11:08)

Add a command to toggle the auto-mute with the same key, perhaps?
Anyway, that command in my i3 set up does not effect the auto-mute mode so there may be something else going on in your system.
Ooops -- my mistake, my system does that as well...
Maybe something to do with pulseaudio -- I didn't have pulseaudio when I used i3 and I didn't notice that problem then.
EDIT: It might be wise to open a fresh thread for this specific problem -- be sure to use a descriptive title to get the attention of the sound experts (not me!).
Last edited by Head_on_a_Stick (2014-12-27 20:26:11)

Issues with CWLMS 3.2 Install Server 2008

Hi,
I am trying to install CWLMS 3.2 on Server 2008 SP2 - I have installed succesfully but when i try and login it asks for username and password which i fill out correctly and then just hangs and does nothing, it seems to be an issue with port 443 or redirection.
Please help
Thanks
Rich

Sounds like CSCtb17186 http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
that Joe mentioned in https://supportforums.cisco.com/message/676256#676256

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7 Where is appletalk or the replacement?
My it guy has set all the Ricoh (The only brand of printers we use.) to enable Appletalk. I am unable to see how to enable appletalk or an equivalent on Lion and have spent 3 hours now searching for it. If I connect to the printer via TCP/IP it prints random characters. I have a Ricoh working for another moddle but I am needing to use this machine. HELP!!!!!

AppleTalk has been gone eons ago. Connect via USB and see what happens. If you are networking the printer then advise on your connection set up.

I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

Issue with form based Authentication in three tier sharepoint 2013 environment.

Hi,
We are facing issue with form based Authentication in three tier environment.
We are able to add users to the database and in SharePoint.
But we are not able to login with created users.
In single tier everything working fine
Please help , Its urgent ... Thanks in advance.
Regards,
Hari
Regards, Hari

if the environments match, then it sounds like a kerberos double-hop issue
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

10g install on (DHCP based) rhel5 -issue with DHCP

Similar Messages

Maybe you are looking for